1, Hand contact surfaces are also the main route of infection from the toilet.

2, Thread and head contact surface lubricated.

3, Therefore, a connector and a contact surface between the connected guide wires are added through the inner connecting pipe and the outer connecting pipe to lower the resistance of the contact surface.

4, Based on the VB development man-machine interaction contact surface, designs the expert failure diagnosis system's interface routine.

5, This system contact surface simple direct - viewing, simplify operation and use, interactive is strong.

6, Afterward software's main contact surface official development in you at present.

7, An actual contact surface burst leads to the highest possible overpressures near ground zero.

8, Through alter the method on scraping contact surface between main spindle head and lathe frame, we may increase contact point and improve the contact rigidity.

9, Outside dimension and quality of the contact surface for the anodes.

10, The machine friendly contact surface, all operations complete on the touching type tablet.

11, The damage mode of contact surface for the GA-E sheet is primarily microcrack, and ploughing for that of EG sheet.

12, The worn wheel tyre contact surface has a concave revolutionary curved form with two principal curvatures.

13, Stainless steel cleaners: Many products so described are polishes or include substances which may leave undesirable residues on food contact surfaces.

14, The characteristic features of the saddle are the new look of its cantle area, its elegant contours and a new type of panel with an extensive, directly effective contact surface.

15, Finally, from the last picture above, you can see contact surface is absolutely flat and polished.

16, In this paper, a mathematical method will be demonstrated to determine the taper angle of contact surface of C-USM.

17, The article fifth rules have given this system's major function movement contact surface chart.

18, And the extension units at both ends of the sliding contact surface Guide to seal well, absolutely rigid Coarse prevent the entry of foreign matter sliding surface damage Guide.

19, The harmonic variation of the normal contact pressure or the maximum Hertzian pressure results in a wavy rolling contact surface profile.

20, It is also one of key contrast research in syntax and contact surface of two languages.

21, The system has the high reliability , function entire , and good man - machine interactive contact surface.

22, In order to attain more precise result, the effect of contact surface must be considered.

23, Finally,(http:///contact surface.html) natural modal of one missile is analyzed considering the contact surface stiffness.

24, The mercury wicks up the reed and wets the contacts, providing a perpetually self - renewing contact surface.

25, And using BACView software configuration control system's monitoring structure and friendly man - machine contact surface.

26, This paper introduces an improved contour optimum design method on contact surface.

27, The influence of the pile type and the friction angle of the contact surface on the limit bearing capacity of the piles and the composite foundation is discussed with an example.

28, The results show that the shear strength of the contact surface is larger with the density increscent, when the water content is larger, it is decreased with water content.

29, This article also simply introduced the VFP 6.0 software contact surface and the operating procedure.

30, Apply a light film of engine oil on the damper hub contact surface of the seal.

31, But the interference fit by hydro form result in the damage occurring on the contact surface.

32, The home page purifies by contact surface Jan , function modulation's nimble expedient is a principle.

33, The shrink-fit components usually suffer fretting damage in the contact surface under rotating bending load, which remarkably reduce the life of the components.

34, It is important of friction te in rock mechanics, and formatting course about contact surface.