1 Conclusion:Vaporous atomization has a great antiinflammatory and antiblastic effect.

2 Atomization and cedrate are very common for high speed film coating machines in practical operation.

3 In addition, the paper discussed the process of atomization of the oiler.

4 The pressure drop was the driving force of atomization by nozzle.

5 The atomization angle, which affects the air and fuel mixture, combustion and emission of engine,[] can be measured by digital image processing with concentration fields measurement system.

6 Result: Vaporous atomization has a great antiinflammatory effect on swelling caused by.

7 The expressions were derived to describe the atomization efficiency a stabilized temperature platform furnace ( STPF ).

8 In the process of dissemination, breakup and atomization of liquid, the transient period from primary breakup to secondary breakup is a very important phase.

9 The atomization process is more sensitive to disturbance than vaporization.

10 Conclusion The oxygenic force atomization atmotherapy is better than supersonic atomization atmotherapy in treating child bronchiolitis.

11 The atomization characteristic of the round jet of the twin - channel air - blast atomizer was investigated by experiment.

12 Since the heat of atomization of KrF2 is only 23 kcal per mol, this implies that ArF2 cannot be made.

13 The atomization mechanism of hypergolic rocket propellant and decomposition combustion at high pressure and turbulence burning of premixed reactant flow field are considered .

14 The atomization characteristic of the round jet of the twin-channel coaxial air-blast atomizer was investigated by experiment.

15 Conclusion The insultus of asthematoid bronchopneumonia could be decreased by treatment with atomization inhalation of salbutamol and budesonide suspension and overall nursing intervention.

16 Objective To discuss the clinical curative effect and side effect of atomization inhaling of ventolin and pulmicort respules in treatment of children severe asthma.

17 This article has determined the instrument best analysis condition , the atomization, the cineration condition, the reco.

18 Spherical powders of dental amalgam alloys have been made by atomization from liquid alloys.

19 The paper developes a set of intake manifold auxiliary air and fuel ultrasonic atomization system, which was tested in the 492Q gasoline engine on an engine dynamometer.

20 The wave theories of sheet and circular jets were applied to analyze the disintegration of metallic melts in film formation regime during centrifugal atomization by rotating disk.

21 If the alloy is in itself sensitive to the oxygen, then not only in atomization time must take the measure, when melting should better also use the vacuum melting.

22 Magnesium nitrate as matrix modifier in the determination of trace beryllium by GFAAS was studied. The effect mechanism of Mg (NO3)2 on ashing and atomization was studied.

23 With the increasing work pressure, the cumulative frequency of smaller droplet diameter was produced, and the atomization would be better.

24 Whole set of industrialization technology of producing metal powder by atomization.

25 Objective : to observe the clinical effect of oxygen drive atomization inhalation ambi - coptis chinensis on treating bronchiolitis.

26 A thermal spray equipment for bore surface coating based on centrifugal atomization was developed, the atomization principle and particles formation process of the equipment were introduced.

27 The length of mixer transition angle o also have influence on atomization level.

28 This company uses international advanced wool-making technology of centrifugal atomization to produce new style thermal insulation materials-centrifugal glass wool serial products.

29 The feasibility of commercialization of emulsified residue catalytic cracking was analyzed based on theories of explosive atomization and molecular accumulation and disaggregation .

30 Using the optical temperature control accessory, silica peak height signal was enhanced doubly, reducing atomization time, extending useful time of graphite tube.

31 The supersonic gas-centrifugal atomization Technology was used to study the influence of distinctive factors on the properties of AgRE alloy powders.

32 Objective To observe the clinical effect of atomization inhales of salbutamol in curing bronchiolitis.

33 The content of impurities in water - is greater than that in gas - atomization.

34 The law how the parameters, such as the pressure before injecting, ambient pressure, the distance to exit, affect discharge characteristics and atomization characteristics of injectors is analyzed.

34 try its best to collect and create good sentences.

35 Based on common CWS ( coal - water slurry ) atomizer and atomization mechanism, a multi - level swirl atomizer is proposed.

36 Theresults of experiment show that atomization cooling can achieve its aim.

37 The break-up process of metallic melts during gas atomization and spray forming is analyzed using the wave theory and the governing equation for fastest-growing wave number is derived.

38 Aqueous solution of lead acetate was introduced into a liquefied petroleum gas flame via air atomization.

39 Al Pb binary monotectic alloys were prepared using the rapidly solidified gas atomization technology.

40 This air improves the atomization of fuel coming fron the low - speed port .

41 The observation group added fluidic atomization inbreathing Mucosolvan, and the contrast group dropped Mucosolvan analytic research.

42 The paper focuses on the methods and the research contents which shall be taken into account in prediction of the influences of flood discharging atomization resulted from underflow dissipation works.

43 Research and development of rheological and atomization characteristics of gelled propellants were summarized.

44 Cylinder plate method was used to test the antiblastic effect of vaporous atomization to46groups bacteria in vitro.

45 The influence of ashing temperature and atomization temperature on determination of lead were discussed.

46 Objective Sand butylamine alcoholic solution union Vitamin K1 atomization inspiration treatment capillarity bronchitis curative effect.

47 Take atomization generator and fix it with seal rings then press gently into the spray gun.

48 Effect gas inlet pressure, geometrical de - sign and relative position of metal delivery tube, atomization gas, etc.

49 Improve carburetor function, Upgrade atomization function , Fully burining, Increase power performance.

50 In addition to the significant merit of no soot emission, DME would be of better ignition quality, lower autoignition temperature and better atomization compared to diesel fuel.

51 In this thesis, series of low carbon cast steel shot were successfully obtained by medium-frequency melting and centrifugal atomization technologies and temper were performed.

52 Effects of air swirl intensity on atomization and combustion performance of effervescent atomized spray were investigated under different conditions.

53 Excellent atomization apparatus is a main premise to apply the technology of wet compression.

54 Methods After the samples were collected from the experimental group and control group, AAS with flameless atomization was used to analyse the cobalt content in hair and blood.

55 Its characteristics are painted high efficiency, good atomization, low air consumption.

56 The solidification during atomization includes droplet solidification during liquid, recalesced, eutectic and solid.

57 Objective:The discussion atomization inhales Bolley Connie and Pu Mukle extends the treatment bronchial tube asthma ute attack the effect.

58 This paper proposes a new process of atomization Solid and Gas dualsolid target powder.

59 Conclusion: Atomization inhalation with ipratropium bromide or salbutamol is more effective than aminophylline in treatment of asthmatic diseases in children.

60 Experiments show that electrization has a great action on gasoline atomization.

61 Conclusion Using andrographolide atomization inhalation in treating infantile herpangina is well effective and worthy of application to clinical practice.

62 The major difficulty we will meet in studying spray atomization is how to handle boundary condition, such as unbounded domain problem and interface condition.

63 Pre - alloyed powder is sprayed through water atomization method.

64 The result showed that the atomization of molybdenum on the graphite probe surface originates from the thermolysis of his carbide compands.

65 In our country the gas atomization, water atomization and polymetallic codeposition method are wildly used.

66 The size of atomization angle plays a critical role in characteristics of fuel distribution in firebox. The atomization uniformity results in maladjusted distribution of fuel and gas.

67 The mode of vanadium slag phase production includes mainly vanadium converter slag and vanadium slag atomization.

68 When the droplet number density is big,[http:///atomization.html] evaporation rate of the droplets are influenced by the heat transfer process and atomization quality.

69 Spherical tungsten powder produced by plasma atomization technique is described.

70 The pivotal factors, pressure of atomization gas, rotation speed of turnplate and degree of superheat of the melted aluminium, are analysed in detail.

71 Arc-ultrasonic improves the atomization of spraying materials and the bonding strength of spraying coatings, and the bonding strength increases with ultrasonic frequency and excitation voltage.

72 Electrostatic atomization has been expanded into foreland research fields such as combustion, spray coating, preparation of anonym film and so on.

73 Liquid atomization is an important issue in the investigation of two-phase flow, and has been widely used in agriculture, energy resources and environment engineering.

74 Improve carburetor function , Upgrade atomization function , Complete combustion, Increase power performance.

75 Silver thick film conductor was fabricated directly on ceramic substrate by micro - atomization ( Microjet ) spraying deposition.

76 Electro - spray is a spray atomization improvement technique by using the electrostatic force.