1) The machine tool does not function properly.

2) This paper analysis NC machine tool perpendicularity error.

3) Designed to machine tool steel, hardened materials.

4) And some problems of machine tool miniaturization are briefly discussed.

5) Major in electrical, machine tool spindle, air-compressors, wind round, roller, plastic rotary clubs, and other groups working balance check.

6) Compared with traditional machine tool, parallel machine tool has such priories as high response velocity , high accessional technology value , and high adaptability to circumstance.

7) However, just like most other China machine tool companies, D machine tool group deeply relies on domestic market and export value only accounts for 3% of production value.

8) Numerical controlling Machine Tool, Packing Machine, Printing Machine, Auto-Production Line etc over 20 different auto-equipment fields.

9) The gearing machine tool of the model Y3150E is modified and a new milling head is designed to cut the envelope tooth of the pinion using allelomorph method.

10) A modular machine tool for a minicar back bridge leads deformation of the workpiece in machining because of large clamping force.

11) According to the parameter table machine tool selection meet your standards of machine tools to control functions of requirements specification is???????

12) High speed machine tool is the precondition for realizing the high speed machining.

13) Host drive system of machine tool is composed of stepless shift components, gearbox of worm wheel, saw frame, worktable, fastening piece,[http:///machine tool.html] feeding and hydraulic equipments.

14) Application: Main shaft of airplane engine or machine tool, high frequency motor, air compressor, oil pump and so on.

15) Recently with the trend in high degree of accuracy of all parts, precision nc machine tool linear servomechanism with superb location and tracing performance is needed.

16) The hinge - available through co - irradiated - folding machine, fold and grid hybrid folding machine tool.

17) The main EMI and EMC approaches were pointed out in designing machine tool numerical control system.

18) The abrasion of the slideway is the basic reason to the decreasing precision of the slideway of the machine tool and produce influence on the inaccuracy of manufactured components in different ways.

19) Trough simulating the characteristics of the 3-RPS parallel mechanism, some conclusion can be obtained which is helpful to design the serial-parallel machine tool.

20) Grinding milling cutter, reamer, disc lathe tool, gear shaper cutter, slide way of machine tool and tool guide.

21) An approach of adding a axis of rotation to wire cut electric discharge digital control machine tool and how to use this new machine is discussed in this paper.

22) For the deep research, we apply the discrete thermodynamic analysis and define the concept of the virtual thermal resistance in the heat control of the machine tool guide.

23) We introduce protocol conversion uniting web strategy to get over the machine tool with RS-232 serial.

24) The global and local collision detection and processing in the machining planar double-enveloping toroid worm gear drive using 5-axis NC machine tool was discussed in the dissertation.

25) It discussed the information model of planar double-enveloping toroid worm gear drive and simulated the machining using 5-axis NC machine tool.

26) Based on the likelihood ratio test theory, a new detection statistic is proposed in this paper for monitoring the machine tool cutting chatter development.

27) As the development of high - speed cutting technology and the maturity of unit technology and the improvement of machine tool technology, the speed of machine center is higher and higher.

28) According to the method of modular design of reconfigurable machine tool, a multifunctional system for micro electro-discharge machining(EDM) and electrochemical micromachining(EMM) was designed.

29) On the basis of these , the general structure of the NC machine tool for hypocycloidal machining of synchromesh sleeves was designed.

30) The utility model provides an arbitrary angle arbitrarily bisector, belonging to the field of a teaching appliance, a drawing tool, a lining tool for a bench worker, a machine tool accessory, etc.

31) Sales revenue increased 11 - fold, 11 - fold increase in machine tool production.

32) The monitoring principle which includes machine tool vibrancy, principal axis displacement, cutting tool temperature, cutting force of cutting tool, temperature field of turner is discussed.

33) The traditional check method is to test run the NC machine tool.

34) The fundamental concept, system structure and system performance of expert system soft-ware development for stack-up hydraulic system of combination machine tool are introduced by this article.

35) In order to improve servo accuracy of NC machine tool feeding system, a method of vector control was put forward for servo-motor control and the mathematical model of AC servo system was set up.

36) The examples showed that the vulnerable area of vibration in the wood-working machine tool with multi-substructures could be distinguished effectively by using this method.

37) During a metalworking and machine tool plant internships, courses and graduate design.

38) In this paper a fluidics device of continuous-path numerical control system for electrical spark machine tool is presented.

39) Based on the superposition principle of small deflections, general stiffness model for multi-axis series machine tool was established as physical constrains for tool posture optimization.

40) Machine tool retrofit is an economic, effective and quick way.

40) try its best to gather and build good sentences.

41) The traditional positioning accuracy detection method of feed shaft for numerical control(NC) machine tool exists low accuracy, method obsolete and poor measurement repeatability.

42) The machine tool is equipped with automatic feeding system and auto manufacture is realized.

43) Translated Description : The main products are machine tool, general - purpose components.

44) The equipment composing concludes processing program, numerical system, servo system, assistant control device, feedback system and machine tool.

45) As the socialization of production, social division of labor is more detailed, leading to a dedicated machine tool market share continue to grow.

46) Yunshn Machine Tool Manufacture is specialized in producing series of planer type milling machine, horizontal boring milling machine, horizontal single-column milling machine, milling power head, etc.

47) From above results, we come to the conclusion that foamed aluminum material can be used to make machine tool table so as to increase dynamic property of machine tool.

48) The machine tool host moves and feeds motion to be linear motion without exception.

49) The present invention relates to a kind of composite material containing foamed aluminum alloy and used in work bench of machine tool.

50) The reasons causing distortion of machine tool slide guide during surface hardening was analyzed and the way to reduce distortion was offered and the good result is obtained.

51) Mount the stepper motors to the feed mechanism of machine tool.

52) Y22160 arc tooth wimbles gear mill tooth machine is adopt cutter head come rough finish machining following two kind of arc tooth wimble gear "s machine tool."

53) Servo feeding system is part of CNC machine tool, the control precision is very important.

54) The result shows there are great influences of geometrical properties of cutter path on the kinematics and dynamics of a machine tool.

55) Through the analysis of familiar faults in borings machine tool maintenance, discussion is made on how to prolong the service life of parts structures by renewing material and improving machinery.

56) Parallel machine tool, namely so-called parallel robot, has been one successful paradigm that parallel robot technology is applied to manufacturing machine tools.

57) This paper describes the development of VMT (Virtual NC Machine Tool) and its functions in the virtual manufacturing.

58) Also, sometimes, intelligent. With a function that can be established or changed by means of a program, ("a programmable terminal", "a programmable machine tool").

59) This paper discusses the hardware configuration and the PLC software design in the electrical control system of a piston ring profile lathing and milling combined machine tool.

60) The article introduces structure and design of parallel connected machine tool single spur track, and calculation of ballscrew.

61) This paper deals with the optimization of universal machine tool gear trains.

62) The straight subulate gears are commonly been machining on special machine tool, but the factories of machining the large-size straight subulate gears are rather less.

63) In 1956, Beijing first began using high-frequency quenching machine tool plant.

64) As advanced decorative topcoat on the machinery and machine tool etc.

65) Used for zero position correction of CNC machine tool and signal division.

66) The most widely used machine tool is the engine lathe, which provides a principle axis rotary primary motion to while the appropriate feed motions are imparted to the tool.

67) The product is applied to cylinder, oil cylinder, shock absorber and lead rail of machine tool, etc.

68) CNC machine tool programming manual methods of programming and automatic program two.

69) According to the processing ask characteristic of workpiece, with stepping sequence control and master control program, make the 3 kinds of control way of machine tool facilitate realization.

70) It's discussed that self-excitation vibration mechanism with creeping phenomenon for lower motion parts running speed in NC machine tool feed system.

70) is a sentence dictionary, on which you can find excellent sentences for a large number of words.

71) EMC is a real - time equipment control software, can control the machine tool, robotics - ordinated measuring machine.

72) This paper deals with the optimization of the universal machine tool gear trains of any types and works out the universal programming of the optimization.

73) Application: Main shaft of machine tool, auto steering structure, main shaft of lathe, grinder, milling machine, drill press, water power dynamotor, tower crane, screw shaft and so on.

74) The application and development background of Virtual Machine Tool (VMT) technology, which is a key technique of agile manufacturing, is introduced in this paper.

75) This work provides the foundation for design of new high speed machine tool.

76) Changchun CNC Machine Tool Co. , Ltd. is the home production the Friction welding machine the main item enterprise, the CNC machine and the plain milling machine specialized manufacturer.

77) Zhejiang Linan Numerical Control Machine Tool Co. Ltd was founded in 1952 which specializes in manufacturing all kinds of LINHONG brand spring collets and the shaping machine model B6050.

78) The key to establish a precise dynamic model with Finite Element Method is the simulation of the dynamic characteristics of the joint face in the machine tool.

79) In the paper, the repack method of the machine tool, the structure characters and the principle of the vibrative gun drill are introduced.

80) Results of clinical experiments show that the machine tool and the cutter path planning algorithm can meet the demand of clinical application.

81) In chapter 4, a new kind of high damping machine tool spindle structure is presented.

82) Basing on the grinding force trace control, this system realizes twin close-loop controls of grinding force and machine tool.

83) Aiming at the application of speech recognition technology in aspect of controlling machine tool, we introduce the classes, principles and technology of speech recognition simply.

84) In internal Grinding of Deep-Hole, the internal grinder spindle presentsslender structure, thus the stiffness as the problem of the machine tool systemarises.

85) In this paper, evaluation of uncertainty in measurement of wood-working machine tool planeness was studied by leveling rule with gauge, and the measurement results of planeness was analyzed.

86) The utility model relates to a machine tool, particularly mechanical wire clippers which are used for opening the locking bar of the reinforcing lock of a boxcar on the railway by shearing.

87) Aiming at the technological requirements of tractor wheel hub threading, the electrical and hydraulic control parts for tapping unit combination machine tool were designed.

88) The functions of the system were tested on the experiment table of simple beam and the bear box of a machine tool.

89) Finally, the application of TCG 16 CNC machine tool fault diagnosis expert system in a factory is introduced.

90) This approach is applied to the pillar optimal design in XH6650 high speed machine center. The dynamic property of machine tool is improved with this method.

91) The main materials of machine tool are carried on life cycle assessment applying the panto -environment functions and the assessment model of metallic materials.

92) The product is applied to cylinder, oil cylinder, absorber and lead rail of machine tool, etc.

93) This machine tool use hobbing cutter adopt continuous cent tooth means roll cut, cans process straight teeth and a garden of stud gear or worm gear.

94) The series machine tool made by the company have been sold in over 20 provinces, municipalities and autonomous regions.

95) Parallel machine tool is an important developing aspect of NC structure.

96) An example of gear cutting machine tool improvement design was also given to explain the process of evaluation in details.

97) Numerical controlled electric spark machine tool has been widely used in model processing in recent years.

98) And have soft water cooling system, the upright hydraulic pressure quenching machine tool assort that.

99) The error correction model of tooth surface was established by machine tool adjustment parameters and meshing principle.

100) Current, more and more complex parts on the world use compound machine tool to undertake be machininged integratedly .

100) try its best to collect and create good sentences.

101) The paper sets the foundry shop of mass production for automobile and that of in batches and small scale production for machine tool as example. Reasonable sca...

102) Use the interrupt control of Siemens 802D SL system to achieve the emergency retraction function for machine tool axis to ensure safe and reliable operation of machine tools.

103) A hierarchical decision-making model of machine tool selection in an agile manufacturing cell is established axiom.

104) Suitable for heavy load and severe condition , e . g. main shaft of CNC machine tool etc.

105) In machine tool, the typical function components with Direct-Drive include"motorized spindle", linear motor and internal torque motor.

106) Based on the complex modal theory, some problems arising in machine tool modal analysis by impulse excitation are examined.

107) NURBS interpolation algorithm, which can fit diverse machine tool′s kinetic characteristics and has the function of look-ahead control, is proposed.

108) This paper introduces the working principle and main function parts of the digital control machine tool servosystem using digital pulse comparator.

109) On the basis of analysis on error model of ultra precision CNC machine tool, the variant gain cross coupling control algorithm is introduced into the servo control of ultra precision CNC machine tool.

110) The finish machining can be completed in one machine tool by milling and rolling.

111) At present, this system comes into being under the cooperation between the TU Chemnitz and Laboratory for Machine Tool and Business Management (WZL) of the TH Aachen.

112) A multi-buses and concurrent virtual system was setup by the use of component technology, Which was called virtual machine tool (VMT).

113) The problem can be studied out by applying the static hydraulic pressure technology to the slideway pain of machine tool.

114) This paper describes a kind of novel design for the cutting organ and long - control organ which are applied in the auto - align cutting machine tool for steel-wire.

115) This method is especially suitable for 2(1/2)-axis NC machine tool path control system, because of easy calculation and excellent dynamic accuracy.

116) Company to design the main, original in Shenyang Machine Tool Plant of the hydraulic senior engineer.

117) A machine tool case verifies the effectiveness of the proposed approach for modularizing product design.

118) In 1978, the complete machine tool research institute of Beijing guide surface contact quenching process and equipment, quenching condition of quality inspection.

119) With improvement of network, control and management technology, DNC for CNC machine tool is created.

120) An intercepted feedback compensation method of thermal error of CNC machine tool is researched in this paper.

121)

122)

123)

124)

125)

126)

127)

128)

129)

130)

131)

132)

133)

134)

135)

136)

137)

138)

139)

140)

141)

142)

143)

144)

145)

146)

147)

148)

149)

150)

151)

152)

153)

154)

155)

156)

157)

158)

159)

160)

161)

162)

163)

164)

165)

166)

167)

168)

169)

170)

171)

172)

173)

174)

175)

176)

177)

178)

179)

180)

181)

182)

183)

184)

185)

186)