1. He's no gentleman, he's a cad!

2. He's a cad and a bounder - I'm not in the least surprised he let you down.

3. The new CAD program really speeds up the design process.

4. It will recharge Ni Cad, Zinc-Chloride and Alkaline cells.

5. He's a scoundrel! A cad!

6. Diplomacy in a CAD manager is to be treasured.

7. Employee response and reaction to CAD depends on their attitude and ability, as well as age.

8. Part of the power of cad is how the powerful graphics capabilities can give a friendly solidness to engineering drawings.

9. That he himself happened to be a congenital cad only made the whole thing more difficult, not easier.

10. These are pitched at intensive Windows users and CAD specialists.

11. Excellent experimental facilities exist for CAD, fabrication, and assessment of integrated circuits.

12. To utilise fully a CAD system requires only one work-station for three draughtsmen.

13. Tests using Auto cad bore this out with an overall 55% increase in shade operations falling to 16% in subtract operations.

14. This course can be finished with cross CAD software.

15. Concurrent control scheme is crucial for CAD system.

16. CAD simulation of operation processes and general production scheduling.

17. Recruit, guide and mentor junior members the CAD team.

18. CAD has substantially increased the number of tumours identified.

19. Most CAD systems are using interactive graphics systems.

20. Object oriented method in CAD of urban planning.

21. The large graph plotter that current home clothing CAD uses the majority is the import equipment, the function is better, but the price is expensive, and the many of them are appropriative.

22. Both metal bashing and circuitry are technologies well suited to benefit from CAD.

23. One could not ignore the existence of situations in which it was necessary to act the part of the cad.

24. So the newcomer need not be totally submerged at first contact with CAD systems suppliers.

25. The Commonwealth of Independent States unit also hopes to exploit the need for new or additional CAD/CAM systems and software.

26. Until recently, none of Clarks' designers had used the CAD system.

27. It is in widespread use, and is supported by other cad systems.

28. One that, as an added bonus, makes him apologize to his ex-wife for being such a gosh darn cad?

28. try its best to collect and build good sentences.

29. Solid modelling is the most recent major development in CAD to be marketed.

30. Mr Browne was disowned by his party because it judged him a cad.

31. In conclusion, ABI measured using the automated oscillometric method can be used to predict the severity of coronary atherosclerosis in patients with CAD.

32. CAD and desktop publishing continue to be improved with ever new and faster PCs.

33. Because CAD/CAM and PDM applications are tightly integrated, they are likely to be implemented by an individual enterprise or software vendor in, for example, CORBA or EJB.

34. Objective To evaluate the safety of GM yeast feed additive with cecropin CAD and to study and set up a model of Safety assessment for GM feed and detecting method.

35. The structual design is a procedure of analysis, check and result expression, so the structural CAD system was developed to match the needs of structual design modernization.

36. Objective To investigate the correlation between plasma neutrophil elastase ( NE ) concentration and coronary artery disease ( CAD ).

37. Project design of CAD/CAM system of the eccentric wheel handspike planetary transmission, setting product design, product simulation and CNC machining in one has been put forward.

38. RP software system is a part of RP which starts with the CAD software system and ends in numerical control software system.

39. The modularization software and interface with CAD can reduce operating time.

40. Our CAD not only provides you dynamic layouts of office plans, it can also enable you to create more space saving as well as cost-effective designs.

41. A CAD system of AC arc welding transformers called AWVTCAD was studied.

42. Implant for orbital defect and CAD for zygoma complex fracture are now studied to be the leading research internationally.

43. Tolerance design affects functional roles and manufacturing costs of products. It has been become a key technique and choke point of information integration in CAD/CAM.

44. The mulit-viewport CAD and 3-D modeling companies ought to jump on this right away.

45. The data management and reserved word for typical design procedure proposed to offering a foundation for use of CAD and application of AI at the level of system software.

46. The method of CAD/ CAE was employed to accomplish CAD modeling and finite element analysis of 400T prestressed frame-type hydraulic drawbench stand.

47. The three-dimensional reconstruction model is widely used in the fields such as pattern identification, cultural relic reconstruction, digital amusement, city planning, CAD and reverse engineering.

48. Last month on ACE 2011, Aras, presented the integration strategy, which included CAD systems as well.

49. Background: It is uncertain whether the pathophysiology of coronary artery disease ( CAD ) differs between genders.

50. A new CAD/CAM integration system about hypoid gear blank is introduced.

51. Parametric solving method (), feature semantics design and CASE based reasoning technique applied in chain transmission CAD system is presented in the paper.

52. The CAD module design may combine willfully, list, pair, polychrome printing unit.

53. Conclusion The negative emotion e. g. athymia and anxiety is more common in CAD patients, and A-type behavior CAD patient is easier to get emotional disturbance than B-type patient.

54. Blank layout is very important for blanking die CAD research.

55. Heat-exchanger CAD system (HECAD) realizes the integration of Technological design, Mechanical design and Components design for heat-exchange equipment with longitudinal flow of shell-side fluid.

56. The mathematical model for the CAD of the electric main bus-bar is proposed.

57. Chiropodist, chiropractor, osteopath, physiotherapist or podiatrist up to $1,000 CAD per type of practitioner.

58. No more pictures of a rotating auto chassis, no visual engineering design, no CAD (computer-aided design) for buildings, kitchens, highways[http:///cad.html], etc.

59. SPCC CAD software package fot inclined shaft station has functions of designing and graphing inclined shaft gathering station and flat station.

60. The basic process of three-dimensional parameterized design for the piercer guide board series has been described in this article as well as its necessity and superiority with CAD.

61. Through applying reverse design to car body covering, obtains 3D curved surface reconstruction of car body covering. this project establishes the base of further design of successive CAD/CAM systems.

62. In the actual production, the design efficiency of Circuit drawing can be greatly improved by the application of computer graphics software CAD.

63. "I didn't know CAD (computer-aided design) when I joined Autodesk, I didn't know hardware when I joined Sun," she said in response to an analyst's question.

64. A raising platform of machine tool for processing the flange of ship rudder blade is optimized by the integration of topology optimization and CAD/CAE system.

65. The result of tessellation is deterministic and therefore well adapted to many CAD situations.

66. The horizontal scanning linearity and the design principle of the reflector with CAD were discussed.

67. CAD software used on a solid model parts and drawings related to the completion of the design.

68. A design framework for modulized intelligent garment style CAD system was proposed, thought dividing the garment into several components, the components become comparatively unattached design units.

69. The CAD technology in micromachine rapid prototyping system is presented. The design of the slicing software for micromachine rapid prototyping system is discussed in detail.

70. On the basis of systemic research on mechanical design CAD software, objective model of belt driving design CAD software is proposed, and the related realization methods are discussed.

71. The system greatly introduced the principle of software engineering and the optimizing ideology of CAD, as has greatly improved laneway design efficiency.

72. Finally has carried on the study and realization to the change gear case CAD system hypothesized packaging technique.

73. Some relative key techniques including the design of 3D data model, database management based on Oracle, the fusion between CAD data and GIS data, sunlight analysis and so on are emphasized.

74. Graph algorithm studying is a key for CAD system developing.

75. The assembling furnace has the advantages of high calorific efficiency and easy maintenance. Its parameters can be optimized by using CAD technique so as to achieve the goal of fast heating.

76. Introducing CAD and artificial intelligence technology into modular fixture design can improve production efficiency, lighten working intensity, reduce manufacturing lead-time and marketing time.

77. The IC processing and device characteristic CAD system are very important parts in the microelectronic CAD system.

78. In this study, loader cab was taken as a special and complex man-machine. By the aid of the theory of man-machine engineering and computerized simulation, the CAD method of loader cab was realized.

79. The method of the optimization design for gear wheel spoke which is based on CAD model is investigated.

80. The method is recommendable to other CAD softwares and provides an easy way to the one Of MICROSTATION.

81. Manufacturing features a CAD model by recognizing geometric features and inputting additional information.

82. CAD Module design can combination at will, one, two , multicolor printing unit.

83. Tube flange CAD can improve the efficiency of designer and quality of design work in practice.

84. Accordingly this promotes the development of die - casting CAD technology.

85. It has many applications in CAD. It is proved that the problem of determining the crossing number of an arbitrary graph is NP-complete.

86. " Cad,'said he, catching her, " I believe you're getting vain. ".

87. As the electrochemical rectifier transformer CAD system is aleatory and enormous, it is divided into two parts.

88. Build, analyse and test product construction with CAD and Prototypes.

88. try its best to gather and create good sentences.

89. Allele and genotype frequencies among CAD patients and non - CAD subjects were compatible with Hardy - Weinberg equilibrium.

90. We provide a complete service including initial site survey, layout design, detailed CAD drawing and installation.

91. In 51 CAD patients associated with carotid artery atherosclerostic plaques, the prevalence of ARAS was 49.0 %.

92. Conclusion: The value of DSE is safe, simple and accuracy in detecting CAD.

93. Objective:To evaluate the therapeutic of tong-bi decoction by oneself for coronary artery disease (CAD)(angina pectoris) and its effect for blood rheology and lipidemia .

94. When the bad and mad scientist named Simon Barsinister and his henchman Cad threatens to destroy the city, Underdog, truly men's the best friend, may be the citizens' only hope.

95. This article exploits intelligent CAD system for special cutting-tool based on UG platform and VC condition, making use of object-oriented method.

96. On the basis of the design theory and production experiences about the running and feeding system, the authors have compiled the CAD software for such a system of the nodular iron casting.

97. The paper presents a CAD method for laying the electric cables of thermal power plant.

98. This paper mainly introduces the project planning and realization method of a kind of CAD application for designing embossment with plane geometry patterns.

99. Methods: A total of 38 patients suspected CAD were detected by spiral CT and coronary arteriography.

100. It is introduced the design principal and operation method of CAD software for vanishing-mould casting process of nodular cast iron pipe. It can raise the design efficiency and precision.

101. Data format of CAD often don't accord with requirements of GIS.

102. Meanwhile, the parameter driven module is developed using the secondary development method for CAD software.

103. CAD graphics standard data exchange format- DXF format, we can easily share resources, without the need to repeat modeling.

104. The CAD system for overhead travelling crane(OTACD)independently developed on the basis of the imported DDM is a special purpose CAD applied software system.

105. Point out the security requirement of CAD systems and problems must be solved.

106. Let the finite element analysis method be introduced into the CAD of carbide end mill, and carry out an analysis on the strength and rigidity of the cutter.

107. Apply critical path method to manufacturing, combine with CAD/CAM technology, the AOE net model is established in which take machine as node and assign task to machine according to process flow.

108. The uniform mathematic model was used to construct freeness-curve and conic-curve in CAD system designing of the hydro-machine vane.

109. Free charge of CAD in providing your future office environment through 3 D models.

110. In CAD/CAM engineering, surface trimming is one of the most important and complex problems and quadrangular meshes are widely employed.

111. There isn ? ? t a perfect method for automatic dimensioning engineering drawing in CAD.

112. The feature of designing farm machine is analysised based on seed drill. A kind of framework for intelligent CAD system based on parameter-design technics and assembly model is advanced.

113. This paper discusses the design idea and implementation plan of mining graph CAD system.

114. General data library of NURBS is used to develop generally best-fit algorithm for CMM measurement points and normal CAD model.

115. This paper introduces a way of inputting picture in CAD system of sectional die design.

116. The Systematic Computer-Aided Design(SCAD)method is presented by combining the Systematic Engineering Design method with CAD technology in this paper.

117. The virtual model library which is based on three-dimensional CAD can overcome these disadvantages completely(), and holds a consequence in the innovation of modern teaching.

118. As for theoretical computation, an mathematical software Math CAD has been employed for calculation of the foaming problem in a polymer melt.

118. try its best to gather and make good sentences.

119. The SideGate frame CAD has realized the modules such as the input module of non-standard and standard mould frame, mapping module, data base module, library module and total control module etc.

120. The prospects for the development of microwave tube CAD technology in our country are described.

121. Scheme design is as all along a weak part of the traditional CAD.

122. Different CAD platforms need the corresponding data interface. So this thesis aims at this problem and the geometric programming interface based on UG. is studied in it.

123. The author intend to find a solution for the computation of non-linear magnetic fields, improve our CAD software, and in addition design a magnet system for a gyrotron.

124. Key techniques of database in knowledge based Engineering (KBE) is given. In this example, LIBRARY module of large CAD/CAM/CAE software CATIA is used as secondary development platform.

125. In order to virtually test the accuracy of profile data obtained through the plunge shaving cutter CAD system, it is necessary to model the flank of the plunge shaving cutter.

126. The aircraft fuel real - time measuring method based on CAD technique is presented.

127. 'say, Cad, " he said, looking at her, " you mustn't be nervous.

128. Addressing simple directory navigation and a clear file naming convention will also assist with the protection of important CAD files and project related documents.

129. The CAPP and CAD modules for micro devices are integrated coordinately to get an optimized design model and mask set.

130. Skillful in using CAD software to design and drawing the parts.

131. Develop circuit board designs using CAD tools to capture schematics and create bill of material documentation.

132. The results show that formulation method of Sweden's vector diagram in the Hydrogenerator CAD is effective, simple and easy.

133. It is rapid and accurate in design and drawing the finger milling - cutter templet with CAD.

134. Objective To study the action spectrum of ultraviolet light in chronic actinic dermatitis (CAD).

135. The ray trace and the illuminance calculation method of the CAD system is analyzed.

136. Rebuilding the data of CAD, make the data of DLG suited GIS inputting and data sharing.

137. According to the integration requirement of design and manufacturing, this paper discusses the existent problems of geometric modelling, in present CAD systems and the necessity of product modelling.

138. This paper deals with an integral-design-oriented stamping die CAD system for carriage based on the mapping between function and structure, which supports top-down process of product design.

139. Analyze the problem of data exchange technology in existing heterogeneous CAD system.

140. VHDL Silicon compiler is a supplementary tool of the IC CAD system-XUECAD.

141. Finally, the joint design module of steelwork CAD project is demonstrated as an instance, the benefits with using MC methodology are also presented.

142. When this happens, it's called artery disease ( CAD ).

143. According to its amino acid sequence the cecropin D and CAD gene was designed, synthesized, and transferred into plants, such as tobacco, tomato, potato, rice, mulberry tree and citrus etc.

144. This paper introduced the method with using the compensating resistance to extend the VCO's bandwidth, and using the CAD to analyze this method.

145. Excellent knowledge of mold and case mold material, good trouble shooter in mold and case shop, good knowledge of project management and CAD software.

146. The author introduced microwave PCB design rule and require, and how to devise high precision circuit diagram by CAD/CAM.

147. At the end , the hierarchy system of intelligent CAD functions and its developing directions were analyzed.

148. Interactive systems, based on computer capabilities, have made possible the concepts of computer aided design (CAD) and computer-aided manufacturing (CAM).

148. try its best to collect and build good sentences.

149. Some special and feasible services including garment CAD data format conversion were introduced.

150. The structure was designed using - CAE modeling technologies and CAD - CAM software controls the plotter during printing.

151. This article takes cast - in - site concrete building as the object, according to its 3D CAD model, found code system by code rule.

152. Methods:Comparison of shuttle walking test with exercise treadmill test was assessed in a group of elderly patients with coronary artery disease (CAD).

153. Digital pattern making is a new technology that can translate 3D CAD into cast pattern.

154. The 2D CAD model data structure and the calculation of related parameters are discussed. Based on the research[Sentence dictionary], the software on the gear wheel spoke optimization was developed.

155. According to the design structure of circuit CAD software, data are putted into the routing program by text file and are stored in data chain.

156. The designable unification for CAD is the inevitable trend for the new type of designable systems and thinking development.

157. The cad! The bounder!

158. The main steps, use CAD software to design matrix, use CAM software to generate a processing program, followed by CNC machine tools for machining.

159. This article introduces the structure of CAD software on steam jetting vacuum pump. Emphasis is given to its optimum design, parameter graph and automatic assembly.

160. VHDL Silicon compiler is a supplementary tool of the IC CAD system-XUECAD. The algorithms of modified VHDL silicon compilers placing and routing are introduced in this paper.

161. Then, a CAD ( Computer - aided design ) model of the guitar is created.

162. Three dimensional CAD is the future for designing foundry shop.

163. Blending surface plays an important role in CAD/CAM, and the problem of blending surface with high-degree geometric continuity is a key question.

164. Be able to use CAD, prefer : experience with mining industry or industry.

165. Author's main work is to complete the focusing system CAD technical research in the microwave tube, concretely, using C to imitate electromagnetic focusing system.

166. In the field of Computer Graphics and CAD/CAPP/CAM system, the application of sorting order is extensive.

167. This paper introduces the general developmental situation of the Computer-Aided Design (CAD) and the class and primary structure of the circuit CAD software.

168. The aim of this study was to evaluate the effects of probucol on endothelial function in patients with CAD.

169. Obstructie Sleep Apnea: An Independent Risk Factor for CAD Death?