1. This dial indicates oil pressure in the engine.

2. On tickover, oil pressure gauge drops to zero and green warning light flickers.

3. The cluster, however, is lacking voltage or oil pressure indicators, for which warning lights substitute.

4. Secondly, I have problems with oil pressure building up in the front axle.

5. It did not matter whether it was the oil pressure gauge or anything else.

6. An electronic sensor constantly monitors the oil pressure in the arm and provides a break-back with auto-return.

7. On the race bikes, we use engine oil pressure to operate the gearchange.

8. CONNECT AN OIL PRESSURE GAUGE IN ITS PLACE.

9. Some advanced device detection device with oil pressure.

10. The four - way valve releases oil pressure evenly to the pulleys.

11. The capacity of oil pressure relief and the conversion factor between oil pressure and gas pressure are measured.

12. The of oil pressure relief and the conversion factor between pressure and gas pressure are measured.

13. When oil pressure system of gas furnace has problems, you should carefully find the causes.

14. The hydraulic system provides hydraulic oil pressure for the blade pitch actuator and to release the mechanical brake.

15. The oil pressure unit total pressure and the branch pressure are adjustable.

16. Oil pressure feeding mechanism ( belongs of optional equipments ); simplified and comfortable feeding operations are provided.

17. A stop reverse key arranged on the preplasticizing oil pressure motor of the device can be clamped between two random teeth of a gear in the preplasticizing oil pressure motor.

18. Whenever the oil pressure exceeds the maximum pressure, the regulator valve opens to reduce the pressure.

19. Pressure transducer located downstream of oil filter for oil pressure display alarm and shutdown, function wired to control panel.

20. It'suggests that oil pressure system should be transformed while gas furnace transformation.http:///oil pressure.html

21. It can avoid the rising of oil temperature due to the sun radiation and the rising of surrounding temperature in summer, and finally reduces the oil pressure and evaporation loss.

22. Other lubrication - system troubles that may require checking into include low oil pressure and high oil pressure.

23. The influence of percentage of gas in oil, slope of side plate, effective bulk modulus, and centrifugal force and gear pair vibration on trapped oil pressure is studied by numerical simulation.

24. The utility model provides an electron inductive plug for the diesel motor oil pressure.

25. Result shows that parameters are controlled in allowable range, such as shield posture, oil pressure of shield jacks, displacement of down link, settlement of municipal pipelines and so on.

26. First of all, the trend of the dollar to oil pressure.

27. Check the oil filter to see if it is plugged up with gunk. A clogged oil filter can also result in low oil pressure.

28. From the upper oil cap and cap gasket the oil pressure in the tank tightly inside.

29. Test results show that the hydraulic valve actuation system can realize continuously variable valve lift and the early intake valve closing by changing the time of oil pressure release.

30. Having analysed the causes of alarm lamp flashing for oil pressure in automobile, pointed that it is concerned with many factors and should handle on time.

31. The oil pressure being too low is the main cause of the engine ? ? s burning out.

32. Oil pressure unit control is adopted in round blade displacement and feeding, and realize stability, velocity and positioning accurate.

33. Replaced the number 1 engine oil pressure gauge in accordance with AMM---. Carried out engine run, oil pressure gauge normal.

34. In the view of practice a determination method of maximum braking oil pressure for braking system during the operation of JK mine hoister is put forward.

35. Expound the importance of the gas device reconstruction from the skid road reconstruction, blocking the frame, the reconstruction of the oil pressure system and coal supply system.

36. This machine enjoys high stability of pressure thanks to its oil pressure system.

37. This article describes the existing problems and countermeasures for gas - making oil pressure system.

38. The physical construction of the 2800-ton oil pressure reverseextrusion press manufactured by SECIM Co. of France and the techniquedof its faults treating are introduced.

39. For example : During engine run the number 1 engine oil pressure gauge fluctuates.

40. In this paper the statistical simulation method is used to extract the fault features of engine parts and fuel system from corresponding engine sound and oil pressure fluctuation signals.

41. Thebuilt - in relief valve accumulator helps maintain full oil pressure inthe governor hydraulic system during transient conditions.

42. The oil pressure will force it up into the heart of the stack of valves.

43. The mixer can be divided into oil pressure type[],[http:///oil pressure.html] manual type and electric motor type.

44. If the oil pressure and current fluctuations on the operation of pumps for - relaxed state.

45. In order to make oil temperature in normal cycle and improve the equipment operation environment, the operating manners of oil pressure system of generator unit has been changed.

46. The auto shutoff is for low oil pressure, and high temperature.

47. They can be used for sensing oil pressure, oil or fuel differential pressure, stall detect, engine control and bearing compartment pressure.

48. The utility model can directly replace mechanical oil pressure alarm sensor.

49. Oil pressure motor pump complexion Pu with low noise type.

50. This paper introduces the process of redefine brake oil pressure after skip improved.