1. The device automatically disconnects the ignition.

2. He fumbled the key into the ignition.

3. The device automatically disconnects the ignition when the engine is switched off.

4. The ignition of methane gas killed eight men.

5. I must have left my key in the ignition.

6. Turning off the ignition de-energizes the spark plugs.

7. He turned the ignition key.

8. The car's security device will immobilize the ignition system.

9. Switch/Turn the ignition on.

10. Put the key in the ignition and turn it to start the car up.

11. The key had been left in the ignition.

12. All burners have automatic ignition and re-ignition.

13. Check the ignition system for faults.

14. Charlotte switched off the ignition and climbed out.

15. I turned the ignition key and nothing happened.

16. He stopped, switched the ignition off and climbed down.

17. Dexter jumped inside and inserted the ignition key.

18. Phil left his key in the ignition again.

19. They are gas with electronic ignition and thermostatic control.

20. Secondly, electronic ignition means low maintenance and easy starting.

21. He fumbled the key into the ignition with numb fingers.

22. Grimacing, she turned the key in the ignition once more, and brought the car around the way she had come.

23. He got into his car and switched the ignition on.

24. She got into the car and switched on the ignition.

25. He trotted to the truck and switched on the ignition. Nothing happened.

26. The flames spread to all parts of the house within minutes of ignition.

27. The man closed the boot quietly and put the key into the ignition of the Saab.

28. This would give the stage an upward acceleration, settling the liquid before the pumps cut in at main engine ignition.

29. Then he turned from her abruptly, fastened his seatbelt, and switched on the ignition key.

30. With another prayer, he turned the key in the ignition of the Rolls.

1. The device automatically disconnects the ignition.

2. He fumbled the key into the ignition.

3. She got into the car and switched on the ignition.

4. The device automatically disconnects the ignition when the engine is switched off.

5. He turned the ignition key.

31. A sealed hotplate with concealed ignition and an automatic oven timer with the time of day clock.

32. Again, a full engine management system monitors performance and controls the fuel injection and ignition systems.

33. No ignition source has been determined in the crash of the Boeing 747, which killed all 230 people aboard last July.

34. He retained the ignition key though he accidentally left the registration document locked in the glove compartment.

35. As he turned the key in the ignition he reflected on how quickly fate can lay a person low.

36. Tell the mechanic to check the operation of the ignition system.

37. The unnamed man, 34, had just turned the ignition of the Mercedes when it exploded.

37. is a sentence dictionary, on which you can find nice sentences for a large number of words.

38. Robyn turned the ignition over, realising he was gaining on her with remarkable speed, and the jeep roared into life.

39. Fumes were so strong, he said, his truck kept running even after he turned off the ignition.

40. Before you put your key in the ignition, make sure you are seated in a comfortable position for driving.

41. He would have to lock the boot but he would leave the key in the ignition.

42. Carefully, as if the gentleness of his touch could somehow silence the engine, he turned on the ignition.

43. The most likely source of ignition lay under Grissom's couch where bundles of wires ran across the floor of the capsule.

44. She put the key in the ignition and turned it, but nothing happened.

45. Thus the immediate result of a K / impact anywhere on Earth would be wildfire ignition over the entire planet.

46. The car engine continued to run despite my having the ignition key in my pocket!

47. Lighting up the hotplate is simplicity itself with Valor's unique Autolite ignition.

48. Sacher turned the ignition key, began to drive slowly away.

49. For example, Unison Industries kept an advanced electronic ignition system for light aircraft off the market.

50. It caught on the second try, and after a minute's revving he switched off the ignition and let it die.

51. He gave a terse nod and switched on the ignition.

52. Other attractions include easy mixing with air and easy ignition at wide mixture ratios.

53. With one hand on the hot steering wheel, you reach forward to insert the key in the ignition.

54. Clearly selling a second-hand car without an ignition key or registration document would not be acting in the ordinary course of business.

55. He reached for the key to turn on the ignition, but the car was still running.

56. The only problem for the Peugeot team came early yesterday when Warwick suffered problems with the ignition.

57. It sits atop the ignition switches for the rocket thrusters.

58. What's more, with its automatic ignition system, the Discovery hotplate is exceptionally safe.

59. Key in the ignition, nothing in the glove compartment and the petrol gauge read empty.

60. My Fiat Panda has a similar ignition fault which I have diagnosed to be a disengaged starter motor.

61. The final objective is to extinguish the fire, and this should occur within eight to ten minutes of ignition.

62. Specially producing automotive ignition coil and Sensor.

63. The products after ignition were examined through X-ray diffractometer.

64. Hydrogen injection and scramjet ignition testing.

65. Failure to do this can damage the ignition switch.

66. AND FUSED IGNITION SWITCH OUTPUT, CAB CAV 60.

67. We are looking for Ignition Coil, please contact us.

67. try its best to gather and make good sentences.

68. CYCLE IGNITION SWITCH OFF THEN BACK ON.

69. Ignition timing must advance as rpm increases.

70. Distance is measured from the point of ignition.

71. Inspect distributor cap, rotor, and ignition wires.

72. Hypergolic ignition systems bear many resemblances to hybrid rockets.

73. I am having problems with my ignition coil.

74. Car theives know how to bypass the ignition interlock.

75. In this study, a new idea that RDF is made with catalysis of alkali, alkali earth or transition metal salts. The addition of the catalysts is to low ignition and burn off temperature temperature.

76. The ignition system is digital controlled in centrifugal spark advance , simple in construction and is able to satisfy the demand of all kinds of engine' s ignition system.

77. Production and sales of high-frequency transformer. FBT ignition coil. LNB. Switching power supplies.

78. The ignition, combustion and burnout characteristics of various kinds of coal and their blended coal are measured with a thermobalance and a drop tube furnace.

79. To start the engine of examplewithout a key , as by short - circuiting the ignition system.

80. Through analyzing the process, this paper proposed a basic design method of the ignition coil (inductance coil). It also gave some ways for measuring the work-efficiency of the ignition coil.

81. Warm ashes were kept in a shelter for women ... Hestia . Every four years the best athletes from the ashes to become flame ignition.

82. The study also shows that the ignition and combustion of boron particle lie on the resorting time and the environment temperature, and have no direct relationship with after-burning chamber's length.

83. Variable valve actuation (VVA) is one of the most efficient methods to achieve homogeneous charge compression ignition (HCCI) and transition between HCCI and SI combustion on gasoline engine .

84. Cold work: Work which not involve use of sources of ignition.

85. To send your car door, HISS device and electric ignition, need 10 days time.

86. No. 2. Electric Parts of Motorcycles: magneto, starter motor, Ignition Coil, magneto of other engine, alternator.

87. In order to determine the proper ratio of center charge with propylene oxide fuel (RCF) and ignition delay time, corresponding experimental and numerical studies on fuel dispersal are carried out.

88. The pulverized coal-air flow ignition limit is mainly influenced by such parameters as initial temperature, ignition source temperature, coal rank and the fineness of the pulverized coal.

89. Based on the energy transfer mechanism between SCB plasma and the explosives, the possible energy effect forms in SCB plasma ignition process were mentioned and discussed.

90. The JWL state equation and two-term ignition and growth model are used in small scale gap test.

91. The characteristic of ignition system is related to igniting rate and influence fire accuracy.

92. The phenomenon of boron particle ignition in hot air was defined.

93. In the paper, the dependability of explode energy of blasting fuse through space attenuation ignite the high energy ignition compositions was learned.

94. In spite of this, when a certain wood reaches flame-flash or ignition, the temperature of the surface does not vary with the change of grain distribution.

95. The ignition delay fault of solid rocket motor happening in a low temperature based on FTA is analyzed in the paper.

96. The ignition characteristics, law and production of CO and CO2 are insignificantly different among three woods. Pine produces most smoke and basswood least.

97. With the rise of heating rate, the maximum release rate of volatile and combustion rate of char, the burnout temperature and the combustible parameter increased, but the ignition temperature...

97. try its best to gather and create good sentences.

98. The software of the engine management system includes 5 main models. The models are intake model, ignition control model, injection model, idle speed model, diagnosis and emergence operation model.

99. Base on such system, the fuel injection MAP and advanced ignition angle are achieved by matching test.

100. By means of analysis on ignition fail reason of auxiliary combustion chamber for catalytic cracking unit, the unreasonable place existed in igniter was found, and improvement plan was given.

101. A uniform method to control the electrify timing of the ignition coil is proposed, and it eliminates the disadvantages brought by ignition division.

102. The process design for ignition furnace in sintering production to use B. F . gas as the only fuel with preheating technique and its application are introduced.

103. Disconnect the secondary spark plug cable from the ignition coil.

104. Cautions during transportation:Avoid exposing to air, sunlight, heating, shock, moisture, or any sources of ignition Or other readily oxidizable materials.

105. The problem of annual arc welding power source whose output is surge and power factor is lower, is solved by means of main circuit, arc ignition circuit and arc static circuit working together.

106. The ignition of both deal and fir blocks were tested a bench scale flashover test apparatus.

107. The temperature and fuel concentration on the surface decline by adding water in fuel and consequently prolong the ignition delay.

108. Smoldering and ignition caused by radiation are special phenomena in disaster combustion and don't exist in modern combustion equipment.

109. The ballistic simulator was used to make experiments of ignition simultaneity of the normal centre core ignitor and the LVD centre core ignitor to propellants.

110. The potassium picrate in the formula can help to reduce the ignition delayed time and pressure rise time.

111. Main products:Ignition Switch, combination Switch, Power window switch and other auto electrical parts.

112. The cranking ignition timing table is used up to this speed on starts.

113. To electrically start a vehicle lacking using an ignition key.

114. If you park in a commercial lot or garage , leave only ignition key with the attendant.

115. Limb orientation perforating gun and sectionalized two orientation delayed ignition technology were used in the test.

116. The simulation of this thesis is designed about the Rayleigh fading and the ignition noise of automobile.

117. Both three kind of single and two parallel connecting water-activated battery may rapidly and reliably fire common electric ignition head.

118. Duke-Honorable Series: Advanced ignition, Constant power output, Low-frequency component, 8-years over-long quality guarantee period.

119. Adjust ignition timing by gradually turning the distributor housing until the timing makes are aligned.

120. Then basic calibration such as ECU I/O calibration, idle speed calibration, cold start calibration, ignition advance calibration, air fuel ratio calibration, boost pressure calibration are conducted.

121. Although the ignition delay period of E-diesel was postponed, the combustion duration was shortened and the mean indication pressure was enhanced.

122. The ESA system on CROWN 3.0 is an ignition system that is controlled by computer, the main effects of which is to control the advanced ignition angel.

123. Carburetor: Device for supplying a spark ignition engine with a mixture of fuel and air.

124. The effects of converter position, ignition timing and idle speed on catalytic converter light-off behavior were studied on an electronically controlled LPG injection engine.

125. The results show that the multi-time ignition can improve ignition reliability, especially when ignition timing is too advance or too late, or air fuel ratio is far from the best ratio of ignition.

126. This stand-up JET SKI watercraft was powered by a high-revving 294 cm3 reed-valve Single with CD ignition and water-jacketed exhaust.

127. At ignition, it will pour a million liters of water onto the launch pad surface.

127. is a online sentence dictionary, on which you can find good sentences for a large number of words.

128. This system has collected fault code, data flow analysis, inspection method of ignition system and so on, the user can add, delete, alter and inquire conveniently.

129. A fuel's piloted ignition temperature is the heat level required to form a gas that will ignite when exposed to a spark.

130. Hall effect type electronic ignition control circuit has been designed by means of voltage comparator.

131. It retains its flex-fuel capability because the Saab engine management system adjusts the ignition timing and turbo boost pressure to ensure there is no pre-detonation with gasoline.

132. The ignition delay period became longer while the sustained combustion period became shorter.

133. Engine spark ignition system is the main source of electromagnetic interference on vehicle.

134. Two transient models have been developed to study the catalytic ignition in a monolithic catalytic reactor.

135. In this system the crankshaft rotating angle, where the peak combustion pressure occurs, is taken to be a feed back signal, so that the ignition timing of the engine is able to be controlled.

136. The ignition and steady combustion of fuel and combustion condition are the key factors to the combustion stability of boiler, so they determine the security and economy of boiler.

137. Flintlock:Ignition system for firearms developed in the early 16th century, it superseded the matchlock and the wheel lock.

138. "Would your car be easy to steal?" — "Fat chance. I've got a device that shuts down the gas and ignition."

139. It includes the Battery, generator, starting system, ignition system, lighting system, system, radio and other devices.

140. Match with the ignite electrode, detect electrode and gas solenoid valve to realize the burner auto. ignition and flame-out protection.

141. Through field application, the boiler ignition control system that adopts the PLC programmable controller can simplify the ignition system, and its reliability strengthens further.

142. Ningbo Tianxing Automotive Elec. Parts Factory mainly produce Starter Solenoid, Ignition Coil, Pick-up Coil and others for 18 years. All products, are exported to all over the world.

143. Flintlock: Ignition system for firearms early 16 th century, It'superseded the matchlock and the wheel lock.

144. According to the heat release rate, the reaction pathway to ignition of sample alkane is analyzed.

145. The mathematical model of arc discharge for capacitive ignition was established and simulation was made.

146. The first thing to check in the ignition system is whether spark is coming out of the plug wirer then work back from this point.

147. Therefore it is of great theoretical significance and practical value to investigate the electromagnetic compatibility (EMC) of petrolic ignition system.

148. Adjust ignition timing by gradually turning distributor housing until the timing makes are aligned.

149. So, this paper exploited a multiple times ignition system based on PC controlled LPG injection.

150. In EDM process with tool as anode, tool wear is largely produced by electron current in gap during the frist hundreds nano seconds of the spark ignition.

151. The catalytic ignition torch technology was also studied, and all of the 27 firing tests were successful.

152. A diesel engine has been converted into a spark ignition CNG engine.

153. The ignition temperatures, combustible indexes and kinetics parameters of pulverised coals have been studied with the thermogravimetry.

154. Prevent Deterioration of your Engines Performance and Maintain Fuel Efficiency with Precise Ignition Control.

155. Besides, auto - ignition occurs in the boundary layer at the lower wall in many cases.

156. The typical starting system includes the battery, the starting motor and the solenoid switch (ignition switch), and the cables which connect these components.

157. Then detailed experimental study and chemical kinetics analysis on the ignition control mechanism of ethanol are carried out.

158. The cell circuits, such as testing methods for ignition pulse and ignition angle are also expounded.

159. The study can provide helpful references for designing and optimization of the single ignition FAE batch formula and warhead.

160. ALL LUEN TAI Non - ignition foam can meet any requirement of international flammability standard.

161. Piezoelectric ceramic electron flame, ignition convenient, saves time and manpower.

162. Insert the key in the ignition lock cylinder and turn ignition switch to the On position.

163. Electronic ignition system is characteristic of excellent performance and low fault rate, the constant maintenance is not needed.

164. The validity and feasibility of the forward reasoning method for fault diagnosis based on BP neural networks are verified by the example of the faults in the ignition system of automobile engine.

165. The battery sends current to the starting motor when the driver turns the ignition switch to START.

166. The lower the density of the charge is, the shorter the ignition delay.

167. After a self adaptive ignition unit is applied, the ignition advance angle of the engine is automatically changed according to different fuels.

168. Most of these large boiler burners arranges into a hedge form and adopts the oilless ignition mode for startup.

169. The effects of temperature and equivalence ratio of supersonic premixed combustible flow on the structure of supersonic combustion flow field, ignition and flame propagation were studied.

170. USING A VOLTMETER MEASURE THE FUSED IGNITION SWITCH OUTPUT CKT ( CAV 3 ).

171. Entire flameout, the automatic flame patented technology ( gas - saving is thorough, ignition to be more convenient ).

172. Through the calculation of thermal stress values, it has been affirmed that free oscillation laser ignition of the explosive is heat...

173. Combustion parameters such as ignition temperature, peak temperature of maximum weight loss rate, burnout temperature, maximum rate of combustion, and combustibility index were analyzed.

174. Droplet ignition and extinction in practical combustors are strongly influenced by forced convection and turbulence.

175. The analysis of combustion parameters in cylinder shows that the ignition delay reduces, peak combustion pressure decreased and combustion process becomes more smooth.

176. This paper reports an experimental study on burning diesel oil-methanol-water compositeemulsified fuel in a direct injection compression ignition engine.

177. This system can make automatic ignition, automatic interlock, automatic regulate work load, meanwhile it can control the product's quality.

178. Firstly, the combustion of a spark ignition engine is simulated, by using a - dimensional turbulent entrainment model.

179. A mathematical model was set up to calculate the minimum ignition energy based on thorough analysis of combustion mechanism of the engine combustible mixture.

180. Lightweight magnesium valve covers, ignition cover, and sound deadening plastic outer clutch cover.

181. Improves the spontaneous auto-ignition point of diesel fuel, which shortens ignition lag time.

182. The ignition characteristics in terms of spatial-temporal evolution of discharge interelectrode structure and optical emission intensity are investigated by time resolved imaging.

183. The homogenous charge and compression ignition engine can red uc e and even realize no particulate emissions due to its mix air to be pre-mixed.

184. Equipped with ignition stove, range hood, water heater, double bed, large wardrobe!

185. The ignition system delivers a - voltage surge of electricity to the spark plug to produce the spark.

186. In addition, the influence of the spark energy, the gas stream speed and the electrode distance on the lean ignition limit of the gasoline-air mixtures by an automobile ignition coil was determined.

187. Speed sensor, or pickup. Produces a pulsating voltage that signals the generation of an ignition spark.

187. is a sentence dictionary, on which you can find excellent sentences for a large number of words.

188. The induction heating oil-free ignition burner can quickly heat heteromorphic metallic passage to meet the requirement for stable combustion of pulverized coal air flow.

189. It is found that the instable start (ignition) voltage is related to the structure and the size of electrode as well as to the physical property of liquid electric inductivity.

190. Via preliminary check-out, n of this car accumulator is enough, open ignition switch, starting function is rotational, but have skid phenomenon (starter is one-way clutch skids).

191. It also investigated relationship between the flow of biomass pyrolystic gas and the parameters of ignition under the certain air-biomass pyrolystic gas ratio.

192. The minimum ignition energy for flammable mixtures containing hydrogen is extremely low.

193. The results indicate that the combustion gas temperature plays the most important role on the ignition capability of the torch igniter.

194. There is a best matching relation between ignition control module and ignition coil.

195. The effects of methanol additive on auto ignition and combustion rate of HCCI combustion was investigated using diesel type fuels(n-heptane).

196. These factors are mixture concentration, ignition advance angle, engine speed, temperature of cooling water and carbon deposit on the SUrfaces of the combustion chamber, etc.

197. Arcing at the tower will carbonize the cable boot , which if it is connected to a new ignition coil, will cause the coil to fail.

198. The test results show that, with the increase of the octane number, the ignition timing delayed, the combustion rate decreased, and the cylinder pressure decreased.

199. CHECK THE FUSE THAT SUPPLIES POWER TO THE FUSED IGNITION SWITCH OUTPUT CIRCUIT AT TRS CONN.

200. He said four camcorders had recorded the ignition process and firework display.

201. The maximum network output error of fuel injection pulse width and ignition advance angle is less than 1%, with an average error of less than 0.

202. For example, if you were to design an icon which tells the user it switches something on or off, which form would you chose: a light switch on the wall, or a key in an ignition lock of a car?

203. In this paper, the physical and chemical properties of diesohol fuel was introduced, and the performance of diesohol fueled compression ignition engine with different mixing ratio was studied.

204. In the control system of engine, the control of electronic control ignition equipment to the engine ignition consists of the following 3 parts:advanced ignition angle, conduction time and detonation.

205. When you turn the ignition key, it activates the solenoid to power the motor.

206. When worked in non-knock conditions, the most optimum spark angle is the adder of the initial spark angle, the basic ignition angle and the amendment spark angle.

207. At last, the application course was illustrated by analyzing secondary voltage of ignition system.

208. The ignition delay periods of methanol, isooctane, n-heptane and their blended fuel were studied based on their detailed chemical kinetic mechanism.

209. Under the new Road Safety Road Rules 2009 legislation, motorists can be fined for leaving car doors unlocked, windows down, parking brakes unengaged or keys in the ignition.

210. Description: Shanghai Cadic Auto Electric ---- Auto electric, ignition & fuel injection system parts etc.

211. The results show that ignition may occur after injection stops if the injection advance angle is increased.

212. If the ambient temperature remains constant, the smaller critical size and the higher critical ignition temperature are needed with the higher critical heat flux density.

213. In order to improve the reliability of airbag deployment, it is very necessary to study the ignition control theory.

214. The steering wheel base with left set ignition switch is mainly designed for the taxi, so that the key of the automobile is not convenient to be robbed by the criminal wishing to hijack the taxi.

215. Synchronizing and asynchronous ignition timing can be realized by ECU and control strategy condition.

216. The actuators may include ignition coil gas recycle, injector and so on.

217. The ignition - distributor vacuum - advance mechanism advances the spark during part - throttle operation.

217. Wish you can benefit from our online sentence dictionary and make progress day by day!

218. In addition to the significant merit of no soot emission, DME would be of better ignition quality, lower autoignition temperature and better atomization compared to diesel fuel.

219. To test the theoretical model, air heating and pulverized coal ignition experiments were done.

220. The research indicated that the design modification had been utilized to solve the ignition delay, the ignition failure under low temperature etc ever occurred in the initial design completely.

221. Main Electric Circuit Ignition: Use the mouse pointer to turn - on the ignition switch on the dashboard.

222. Modern cars are a far tougher proposition, as their engine management computer will not allow them to start unless they receive a unique ID code beamed out by the ignition key.

223. The paper studies on the ignitability and the inductance of the rigid electric ignition, while the microcrystal-precipitating igniting explosive is applied to the rigid electric ignition.

224. Influence of engine performance with ignition advance and air-fuel ratio was discussed and studied in detail.

225. This paper introduces the designing principle, structure and function of the ignition coil tester.

226. Homogeneous Charge Compression Ignition (HCCI) combustion has become a focus of the engine combustion research.

227. A battery provides the electric power to operate the starting motor and the ignition system during cranking.

228. The ignition exciter provides the high voltage required to produce the spark at the ignitor plug, the ignition exciter electrical components are enclosed in a hermetically sealed metal container.

229. Taking aft-end igniter design for a rocket motor for example, design methods for ignition sequence, amorce quantity estimation and nozzle closure were described respectively.

230. Adding DMM in diesel fuel did less influence on the ignition delay and rapid burning duration while the total combustion duration would decrease with the increase of DMM in diesel fuel.

231. In this paper, A test method for the delayed arming circuit of the electric ignition fuze is introduced.

232. For improving the coal combustion performance and combustion efficiency, we used Ma Fulu and thermal instrument to determine the being on fire speed, the ignition loss, the calorific value, etc.

233. Moreover, there is disclosed a method for improving the average film thickness from the combustion of a middle distillate fuel in a compression ignition engine.

234. Knock threshold detection is the key of closed loop control of ignition in gasoline engine, and it is also the difficult point in knock measurement.

235. The problem of longer ignition delay for hydrocarbon fuel can be effectively solved by means of preheating fuel by shock waves and using hot gas as pilot.

236. Its head tone is: Grape: White muskiness grape chooses the life with active ignition, grapefruit: Yellow or pink grapefruit, show joy and youth.

237. In conclusion, the influence of the control parameters to the ignition delay is increased with the increase of the octane number and the decrease of the cetane number of the fuel.

238. This paper introduces the designing principle, structure and function of the ignition coil tester. It is used in ignition coil production line and has better accuracy and repetition.

239. Write the selected music and ignition control programs into the igniter.

240. In addition, the completed programming has been used to analysis the influence of main-depute powder proportion, ignition delay of depute power and plunger mass on interior performance.

241. High pressure can significantly reduce the ignition delay and combustion period.

242. Phenol oxidation and catalyst - sorbent ignition may proceed bt different reaction mechanisms.

243. First, it closes and opens the circuit between the Battery and the ignition coil.

244. As a result of low heating value and unsteady component, ignition and combustion of Municipal Solid Waste(MSW) are difficult using conventional methods.

245. Description : Ruian Jiahang AutoAuto ignition switch, door lock, wiper connecting bar.

246. A test ignition system for two - stroke micro swing piston ICE is designed and realized.

247. Accurate air fuel ratio control is the key element for fuel economy(), low emissions and good driveability of spark ignition(SI) engine.

248. Livermore has been pursuing the idea ever since with a succession of bigger and bigger lasers, culminating in the National Ignition Facility.

249. The misfired and uncompleted burned cycles increase during the preliminary process and the ignition delay is longer than warm start during transient process, so the HC and CO emissions rise.

250. Physicochemical properties and combustion mechanism of boron are introduced. Long ignition delay time and low combustion efficiency are due to the properties of boron itself.

251. "Her key fit not only my lock , but my ignition as well --so high-five for Toyota, I guess, " he said.

252. C ignition voltage and pulse ignition voltage has been made under the same operation condition of the cathode.

253. Choice main point: Shines the light should choose the temperature low energy conservation tube in the cloth skill, avoids the hyperpyrexia , the ignition fabric.

254. The new ignition system can use andas fuel and realizes igniting automation.

255. This system can be extended to realize the multi-center data acquisition, and the measurement of many-headed ignition coil.

256. Light off the pilot burner, with care not to exceed 15 sec. Max. in ignition time.

257. Using a combustion model some problems such as: the relationship between ignition delay and fuel concentration, the relationship between soot concentration and the equivalent ratio of mixt...

258. The design is based on a safe and convenient considering the gas ignition control system.

259. The signal read out of the sensor is to be filtered, amplified, shaped and synthesized and then transformed into a digital pulse one, which is equivalent to the ignition time delay.

260. With preheating SHS technology, by using preset detonator, the ignition apparatus in SHS reaction equipment can be cancelled, thus realizing industrial continous production.

261. The ancillary systems of plasma ignition are also involved in this paper.

262. The high plasma current allowed in a RFP is expected to be sufficient to heat the plasma to ignition without the need of auxiliary neutral-beam or radio-frequency heating.

263. The different plasma generator with different discharge efficiency is very important to performance of plasma ignition.

264. A motorcycle electric ignition system for guarding against theft was designed.

265. The paper presents the working principle, and operating mode of the system as well as the ignition control circuit.

266. If the ignition delay is too big, the propellants cant be burnt; if the ignition is too small, the improvement effects are small.

267. Based on the efficient control of waste spontaneous ignition at the head and tail of raw coal conveyor belt, review the methods and experiences.

268. The measurement and analysis of some experimental models revealed that the engine revolving speed bore a matching relationship to the electronic ignition system in an automobile.

269. A new generation fusion reactor will be needed after that to prove the next step, ignition.

270. In ignition control we mainly adapt the ignition ahead angel and the pulse wide of ignition according to the speed and load of engine.

271. Make sure of the pilot burner ignition and open the F. O piston valve for main burner light off.

272. The application of new less oil ignition system burner is presented based on lack of oil.

273. A closed loop controlled ignition system with the use of an optical fiber dynamic combustion pressure sensor is presented in this paper.

274. The engine control system is composed of ignition control system, fuel injection control system, idle speed control system, emission control system and etc.

275. The safety switch controlling the ignition circuit in gas engine and flameout magnetic valve in diesel engine is used in air brake system to realize the automatic protect.

276. This article builds the numerical plasma generator model of GT 25000 plasma ignition system.

277. Thick film circuit have been used increasingly in the manufacturing of car ignition modules.

278. The automatic - ignition gas range ( ring ) is quite easy to operate.

279. Results reveal that self-ignition is inclinable to occur in the expansion ramp, and two auto ignition mechanics are employed.

280. As for the effect of the percentage to laser diode ignition delay time, a completely different conclusion have been obtained when processing pressure has greatly changed.

281. It also presents an approach to assessing the ignition conditions of the blended coal.

282. For example, the National Ignition Facility located in Livermore, California, is predicting a major milestone accomplishment of ignition sometime in 2011/2012.

283. Install the fireworks combinations at the site according to the assemble diagram, connect the audio line to the audio equipments, remember to connect the ignition plug.

284. The faulty ignition switch can cause a car's engine to stall.

285. This model is based upon drop vaporizing combustion model and includes fuel spray, mass entrainment, fuel evaporation, heat transfer, ignition and combustion, etc.

286. Two computation theories of critical conditions for ignition of UDMH droplet in an inert atmosphere are presented.

287. This trigger is the necessary ignition device of xenon long - arc lamps.

288. An alcolock, or more formally a"breath alcohol ignition interlock device"(BAIID), is fitted to a car's ignition to stop a driver from starting it if he's over the drink-driving limit.

289. It can be used to make vaporizer, distributor, ignition and braking systems, slide block, electrical magnetic valve, wheel, and impeller.