1. Lubrication reduces noise and wear.

2. Use a touch of linseed oil for lubrication.

3. We shall require more lubrication oil this month.

4. The rate and amount of vaginal lubrication does decrease with age.

5. The identified problem areas for companies were lubrication, wear, condition monitoring, bearings, gears and seals.

6. Laughing this soundless lubrication, Jingui such as oil spring!

7. Vacuum pump repair package Vacuum pump lubrication.

8. Roller kiln using helical gear drive, oil bath lubrication.

9. The importance of proper lubrication can not be overemphasized.

10. In older women, sexual excitement produces more vaginal lubrication.

11. Lntegrated automatic lubrication system make the maintenance more easier.

12. Use aloe of lubrication as KY jelly.

13. Suitable for all types of vacuum pump lubrication.

14. Lubrication and consumable ordering, storage and statistic.

15. Insufficient lubrication can be overcome through the use of an artificial lubricant.

16. Youliang tune the main plate , Adagio, lubrication plate, cutting board.

16. Wish you can benefit from our online sentence dictionary and make progress every day!

17. In the following chart the lubrication times are listed referring to gearboxes operating under regular and continuous duty.

18. Lubrication behaviors, friction and wear properties of different thin solid films were investigated for the same type of harmonic drive reducer under the same test conditions.

19. The lubrication of thermo-forming mould is very important in improving its product quality, decreasing deformation load and lasting operation life.

20. Using the right hand to touch the string gently through the fingers,the trace of lubrication,with my flying fantasy.

21. The microscopic particles bond themselves to metal surfaces, providing long-lasting lubrication.

22. Waxing the skis helps them to slide better and some slopes have a lubrication system which further reduces friction.

23. Oilseed rape is likely to be engineered to produce more than one type of oil: for margarine, cooking oil or lubrication.

24. Jean-Paul looked down at his own oiled body, then spat on to his palm for added lubrication.

25. This will take us about three months to complete after which we will concentrate on fitting brake and lubrication gear.

26. The lid is naturally oily and doesn't need extra lubrication.

27. Between the axis and the axle sleeve seals uses the bath lubrication, enhances the lubrication effect.

28. Without water in order to guarantee the normal operation of the oxygen compressor lubrication, safe, reliable, and we install the exhaust temperature measuring instrument at various levels with alarm.

29. Force acting at piston skirt from hydrodynamic fluid film and moment about piston pin were obtained from Reynolds equation of hydrodynamic lubrication.

30. Involved parameters was selected correctly in order to design reasonablely the oilless lubrication compressors.

1. Lubrication reduces noise and wear.

31. I produced the drill pipe thread sealed lubrication of fat is good, easy to use, can apply to different depth and scope of various conditions, and other characteristics.

32. It is very crucial that oil mist lubrication condition in branch pipe for oil mist particles in the pipeline transmission.

33. The lubricant monitoring index serials are also set-up in terms of the common lubrication conditions of the pressurization units.

34. In land animals, saliva contains mucus, and provides lubrication for food in the alimentary canal.

35. The oils may also be used for the lubrication of the compressor cylinders in natural or petroleum gas service, provided the gas is dry and free of suspended petroleum liquids.

36. Use of industrial diesel oil, L, V series engine, four-stroke, turbocharged, direct injection. High-pressure lubrication system. , Optional open or closed cycle.

37. The valve should require no lubrication, and contain no " dead " volumes.

38. Because all oil pumps are positive displacement types[], a pressure regulator valve must be used as a safeguard against excessively high oil pressures in the lubrication system.

39. Lubrication and good abrasion resistance strong, and prolong engine life.

40. It has been in almost constant action for as much as a week without cleaning or lubrication.

41. Other lubrication - system troubles that may require checking into include low oil pressure and high oil pressure.

42. If the compressor, the oil pump and corresponding reverse back, so lubrication oil pump will not work, compressor lubrication will occur, thus make compressor obstacles can't work normally.

43. In metal lubrication two distinct regions are recognized: boundary and hydrodynamic.

44. The whole machine undergoes the spray lubrication and is equipped with engine oil automatic balance facilities.

45. DAVY roll can cover all these shortages , and It's theoreticalfoundation is the gas - film lubrication theory.

46. The speed of the compressor, the lower oil consumption is reduced, lubrication effect will become worse, according to this problem should be used pressure lubrication cake layer.

47. Circulating lubrication system is used in gear transmission to extend the service life of the gear.

48. The whole machine undergoes the ray lubrication and is equi ed with engine oil automatic balance facilities.

49. The utility model is applicable in manual or automatic centralized lubrication systems of middle and low end machine tools.

50. Using numerical techniques, the thermal elastohydrodynamic lubrication ( EHL ) in line contact under reciprocating motion was investigated.

51. Using abrasion machine, under different lubrication condition, the influences of lubrication on friction coefficient, wear quantity and service life of needle die were studied.

52. Light card Corena E must be used for the production of mineral oil-based lubricant of low density polyethylene cylinder high pressure compressor lubrication.

53. Analysis the mass and linear wearing rules for the surface of involute gear tooth, with dry friction or lubrication shortage.

54. If have, whatfactors causes loss of oil mist particles in the line?If we know the cause of the loss of particles, we will improve our beneficial form oil mist lubrication pipeline.

55. Therefore, the bearing does not require any cooling or liquid lubrication.

56. This thesis analyzes the impact of surface texturing on the piston liner and ring lubrication, and provides a theoretical basis for surface texturing's application in piston ring.

57. Lubricator is an element which can provide good lubrication for pneumatic system, with novel structure and easy adjustment of oil drip.

58. Suitable for use in enclosed industrial gearboxes and automatic, centralised lubrication systems.

59. The main property figures of SW-2.5/7 oilless lubrication compressor get A-grade level of half-oilless lubrication compressor. The compressor has...

60. No maintaining measures such as lubrication and twisting moment is needed, so the maintenance cost is decreased.

61. Transmission medium is not only the energy transfer intermediary, but also lubrication, sealing and heat transfer medium.

62. This product has a good pumpability and water resistance , colloidal stability, mechanical stability, especially for high-temperature, high load , wide speed range of lubrication occasions.

63. At this type of shielding pump for bearing lubrication, cooling and liquid cooling of the electrical flow direction with the basic type is just the opposite.

64. As lifetime lubrication is required, all functional properties, in particular ageing stability and friction characteristics, must be available at all times.

65. The guide bearing lubrication performance of hydropower sets is directly relative to the problems of shafting abrasion and vibration.

66. In this paper author introduced the design calculation method and working steps of the grease centralized lubrication system.

67. It has good stability and lubrication, better than calcium stearate, but poorer than lead stearate.

68. Equipped with good lubrication and leading screw pre-stretching, the processing accuracy of Z-axis is guaranteed.

69. This paper briefs the application of total base number surveying to the whole course of equipment lubrication management.

70. Hard - chromed piston rod with micro - grooves , increasing the rigidity and reducing friction, keep better lubrication action.

71. White body lubrication glossy nubuck with the translucent water body formed contrast material, Tai Ping and the handle holes facilitate mobile operators.

72. External components for the oil pump pressure lubrication oil lubrication system of forced circulation type.

73. The surface oxidation of strips was investigated in order to study the influence of hot-rolling lubrication on the surface quality.

74. Lubricant filled in housing is NO. 0 semi fluid gear grease (produced by Wuxi Oil Refinery). Checking the lubrication once a year is recommended.

75. The fluid also used for lubrication and should be incompressible.

76. The present gear-pump vehicle centralized lubrication system is difficult to pump viscous lubricant effectively, and so cant be used in alpine frigid region.

76. Wish you can benefit from our online sentence dictionary and make progress day by day!

77. The test apparatus to friction disc of wet clutch in automatic transmission can change some test parameters, such as sliding velocity, turning inertia, normal applied force and lubrication volume.

78. The force-feed lubrication method is used for drawing aluminum - clad steel fabricated by continuos extrusion process.

79. The sliding wear tests have been carried out with MHK-500 ring-on-block sliding wear test machine under paraffin oil lubrication condition.

80. According to gas lubrication theories, the mathematical model of aerostatic bearing with inherent orifice was developed.

81. The spindle box in spindle speed change mechanism, controls and lubrication systems.

82. The friction coefficient of ferromagnetic flow under boundary lubrication exhibits regular change in the presence of applied direct electric fields.

83. Adequate lubrication is important, but use only water-based lubricants on latex condoms.

84. It also expounds influences of hardness and roughness of teeth surface, lubrication, running-in before use on touch strength of gear.

85. Children's shoes . Automatic lubrication for longer service life . No oil leadage problems due to special design.

86. The effect of forming steps, load curve, friction and lubrication, technical hole of the part on distribution of blank thickness was analyzed.

87. An analysis is made of the causes for the occurrence of hydrodynamic pressure lubrication and the conditions for its realization.

88. Visual inspection of the coupling, inspection of re - lubrication, replacement of worn parts.

89. Grease gun and oiler are the lubrication service tools for machinery.

90. Automatic lubricating system ensures sufficient lubrication of every part to achieve higher durability.

91. Gear tooth surface appearance affects strongly friction and lubrication property of gear.

92. Discussed its bearing structure design and the reasonable choice of bearing's tolerance and fit, windage, lubrication and airproof .

93. Viscous damping is caused by such energy losses as occur in liquid lubrication between moving parts or in a liquid forced through a small opening by a piston, as in automobile shock absorbers.

94. Single-acting low cost actuator, no maintenance or lubrication, no pistons or moving parts.

95. By the iterative method, the influence of cylinder vibration on piston skirt lubrication is investigated.

96. Anti-foam additive allows any entrained air to be released and burst quickly, ensuring enough lubrication between machine parts at any time.

97. Though practices, he sums up that good lubrication is the key point for equipment 24 hours peak-load operation, as strict equipment management system is necessary.

98. A lubrication equation is derived of kinematic pair of the moving tooth-guidance for moving tooth transmission of push rod style.

99. The kinetic model of extreme pressure lubrication is set up this paper, by applying the principles of physicochemistry and tribochemistry under the condition of the contact state.

100. Motherly love is like a spring rain, soundless lubrication , long distant.

101. The results indicate that oil-distributing pair runs in boundary lubrication condition, and it is mainly abrasion wear.

102. Sludge can also clog oil passages and prevent normal engine lubrication.

103. Transmission mainly worm, worm gears, no excessive noise when used, and there is sufficient amount of lubricant oil can get a good lubrication, and increase machine life.

104. FEATURES: automatic lubrication design to decrease damage of friction and to reduce noise.

105. Actually, piston ring is working under the state of boundary lubrication and the half dry friction.

106. Make sure that the top roller bearing[Sentencedict], the lubrication of the shaft seating.

107. Other features include: Preselector time control for auto cycling ; Roll slide positive stop; and Automatic lubrication.

108. The liquid friction materials on railway cars refer to materials of lubrication oil or lubrication grease.

109. Entitative change of lubrication mechanism has taken place because kinds of additive are perfected constantly, performance is advanced great extent, complex technology is constantly mature.

110. The influence of large radial deformation of connecting rod bearing bore's surface on lubrication analysis of connecting rod bearing should be considered.

111. All moving parts within the pump are using the transmission medium lubrication.

112. The method that examinates the lubrication oil additive self-repairing performance by measuring machinery external features message was presented.

113. The high failure rate of rotocel' reductor could be settled by improving the lubrication system of reductor.

114. In the case of centralized grease lubrication, should be regularly check and infuse new oil, system sand machine.

115. The oil is thrown upward as droplets or fine mist and provides adequate lubrication to valve mechanisms, piston pins, cylinder walls, and piston rings.

116. Automatic lubrication for longer service life, no oil leakage problems due to special design.

117. Gastrointestinal serosa layer of the outer surface, so that the surface lubrication, easy activity.

118. This paper introduces the gist of proper operations and maintenances of paver according to the characteristics of centralized lubrication system.

119. A research was made on the structure of piston ring and elastic force ring in oilless lubrication compressors.

120. Lubricant fitting is provided to permIt'stem bushing lubrication for ease of operation.

121. Mobil Pegasus 801 Series are premium quality ashless gas engine oils intended for the lubrication of all classes of gas engines operating at low, medium and high speeds.

122. The results show that ZA27 alloy is a good antifriction material in lubrication.

123. Social security is the adjustor and lubrication materializing social justice.

124. The structural design properties, installation technique and application effects of split type oil-free lubrication sealing unit are introduced in detail which is used for the flash boiler in PP unit.

125. For the force-feed lubrication drawing process the effect of the reduction and drawing speed on the property and microstructure has been discussed.

126. Many machining operations require coolant for lubrication and cooling purposes. Coolant can be turned on and off form within the machine cycle.

127. Grinding fluids have the functions of cooling, lubrication, cleaning, and rust prevention in grinding process.

128. Feed spot: Single pump feed dian2-12, if with piece type oil feeder coordination use, then may satisfy utility-type unit more lubrication points the uses.

129. PVT graphs was obtained in dry friction and water lubrication. At last, the affection of PVT graphs on design of water lubricated bearings is analyzed.

130. Because of the oilless self-lubrication characteristic in ceramic, the bearing may overcome lubrication problems in an ultra-high vacuum environment.

131. An oil collecting space is formed in the tail end of the blade by the downwardly concave of the tail end of the blade, and the oiling and the lubrication conditions of the blade are improved.

132. Is suitable for heavy load, high temperature shock dynamic intense mechanical equipment use, centralized lubrication system or gear box.

133. All other lubrication points are served by a centralised pressure lubrication system.

134. In peacetime, you should also note on bearing lubrication, prevent wear.

135. Nano silica with different specific surface area was used to prepare the lubrication grease with NBR silicon oil as base oil and silanol modifier.

136. Therefore,[] we should not lubrication oil heater is right choice.

137. Protect B is also suitable applications in which continuous lubrication the bearing cannot be guaranteed.

138. The formulas of slip frictional force and torque of bearing clutch, a new foreign product, were deduced under the condition of no lubrication based on elastic fluid deformation theory.

139. The lubrication of vacuum roll-element bearings include liquid lubrication and solid lubrication.

140. ND-F2031 is lead series composite stabilizer, it has balanced effective lubrication action, can promote colloidization, let product full gloss.

141. Further understanding of the mechanism of lubrication, friction and oil-scraping action of oil ring is gained from studying on oil-scraping height of the coil spring loaded oil control ring.

142. This system can be used in new-built rolling mills. It can also replace the lubrication grease system of new available mills.

143. The lubrication of tooth surface is the key to realize the transmission of steel worm - gear.

144. Hydrogen sulfide compressor lubrication system and cylinder to keep dry.

145. Residual oil on engine parts also provides lubrication for engine start - up.

146. Good demulsibility promotes quick water separation. If water is an unavoidable contaminant, thereby ensuring effective lubrication.

147. Natural gas compressor lubrication general compressor oil with mineral oil.

148. The friction properties and friction mechanism of a new high strength and wear-resistant aluminum bronze named HSWAB alloy were analyzed in detail under lubrication condition.

149. The lubrication model of wedge-shaped slide block that is loaded unit impulse was established, it is showed that loading unit impulse is identical with creating an initial velocity.

150. Its outstanding anti- rubs the additives ingredient, prevents to stick the anti- glide, causes the part glide accurate smooth, the gumming, does not carbonize, bears the lubrication.

151. Oil mist lubrication system is widely used in large, high-speed, overloaded rolling bearings.

152. Readily accessible lubrication and inspection points are incorporated into the design for increased maintenance serviceability.

153. Make coefficient of friction lower into 0.001, almost in zero wear away of ideal lubrication status.

154. Hydrodynamic pressure equations of grinding fluid used in surface grinding were established based on Reynolds equations of hydrodynamic pressure lubrication theory.

155. It has been proved that the main reason of the wearing was the destruction of the lubrication. Suit- able technique was used effectively prolonging the life-span of the copper slide block.

156. This paper introduced the principle, characteristics and application of the electric pressure retaining gas-oil lubrication system in high-speed wire mill.

157. The compound bearing installed between headstock and bearing seat does need any lubrication. No wearing.

158. Paper machine dry period for homework is running high temperature and the center to pressure lubrication station transmission oil to everywhere bearings of lubrication and cooling.

159. The case of recoiler is used as an oil tank, on which the lubrication oil pump is mounted for circulating lubrication.

160. But under the condition of splash lubrication, the anti-sticking wear resistance of the bionically unsmoothed surface is better than that of ordinary surface.

161. Entire closed, oil bath lubrication to ensure the friction surface protected by oil -based membrane, thereby extending use time, solving the petal-type cardan shaft lubrication problem.

162. If have the characteristic, can feel hair that this kind of air compressor oil has lost the proper lubrication performance.

163. The author considers that there is a unstable region for the involute spur gear lubrication by theory analysis.

164. The influence of surface texture parameters on piston ring lubrication performance was obtained by solving the mathematical model with multi-grid method.

165. Using the moving grid technology, the influence of a particle in oil film in a cylinder on piston ring lubrication was investigated.

166. The machine adopts slide bar thread take - up[], horizontal rotating hook and auto - lubrication system.

167. Use of industrial diesel oil, L, V series engine, four-stroke, turbocharged, direct injection. High-pressure lubrication system. , Optional open closed cycle.

168. There is silicone-based lubricant on the inside of the condom, but additional lubrication can be used. The condom does not contain spermicide .

169. Besides, if the feed and depth of cut is increased, the lubrication effect will become poor, and the reducing extent of the cutting force will be reduced.

170. This is of great importance to the analysis of the tooth flank profile, contact area, lubrication design and strength calculation of the above-mentioned...

171. Japanese bearings - high precision and durable. Add gear lubrication system . Quality guarantee.

172. Features shape of plum blossom, taste sweet, loquat juice is fine, red bean oil lubrication delicious.

173. Objective To evaluate the prevention and cure effect of tetracaine lubrication acesodyne gelatin on throat ache after general anesthesia.

174. For the force-feed lubrication drawing process, the effects of the reduction and drawing speed on the property and microstructure have been discussed.

175. The procreant reasons of error are analyzed according to analyzing calculation for lubrication theory and testing method for bearing.

176. Presents oil fog lubrication technology, structure and working principles of fog lubrication system, as well as its successful application in No.

177. Employing the average flow model and asperity contact model, a theoretical analysis for piston rings lubrication condition has been presented.

178. Sino-NSH Oil Purifier Manufacture Co. , Ltd is a high-tech Company which is engaged in researching, developing and manufacturing lubrication purification equipment.

179. The results showed that the boundary lubrication film on the worn surface was composed of the absorbed layer and reacted layer.

180. The plane enveloping worm gearing of hydrostatic lubrication is a new type of worm gearing.

181. If the lubrication is guaranteed, the equipment life will be significantly prolonged and raise the benefits.

182. Equipment Maintenance Equipment protection and maintain through general approach , like the cleaning , lubrication , adjustment.

183. The journal bearings of a cone bit in operation are in a condition of composite lubrication, the load on them is carried partly by the oil film and partly by the micro - protrusion of bearing metal .

184. In traditional design, there is no quantitative analysis on the elastohydrodynamic lubrication for engine's connecting rod bearing.

185. Warmer conditions can send meltwater to the glacier's base, increasing lubrication and consequently glacier speed.

186. This article on the screw compressor lubrication performance of the domestic lubricants made some positive studies to explore.

187. The array micro - pits with regular profiles can modify surface tribology character, improve lubrication and wear - resisting.

188. Anti-foam additive allows any entrained air to be released and destroyed quickly, ensuring enough lubrication between machine parts at any operating time.

189. In this paper a new type of loading ram-cylinder system (LRCS) by using hydrostatic lubrication technique in large force standard machine is described.

190. This is of great importance to the analysis of the tooth flank profile, contact area, lubrication design and strength calculation of the abo...

191. Main shaft adopts center automatic lubrication system to free operator from the worry of negligent lubrication and basic part damage, can effectively ensure machine durability.

192. The feasibility of using air lubrication to eliminate the extrudate rotation is theoretically predicted through the analysis of flow field.

193. Series production design on SW-2.5/7 oilless lubrication compressor was discussed so as to design large-power and air-cooling oilless lubrication compressor.

194. Because of heavy load and low peed of rotation, it is difficult for rock bit bearings to form a fluid ilm between the sliding surfaces, and, therefore, they may be in boundary lubrication.

195. In females, the first and most obvious sign of sexual excitement and tumescence is the lubrication of the vagina.

196. The lubrication performance of thrust bearing is analyzed in this paper.

196. try its best to collect and make good sentences.

197. According to the dimensional theory, the similitude criteria of lubrication performance in thrust bearing are deduced.

198. Load sharing among teeth must be defined to calculate the strength and lubrication of worm gearing.

199. E, The automatic lubrication system can guarantee the machine precision and enhance machine durability.

200. The machine's worm gear drive adopts fully - enclosed oil - immersed lubrication with long service - life, prevent cross pollution.

201. Straight teeth casting ladle can output gear lubrication and low wear.

202. All machinery must be lubricated periodically according to the lubrication chart.

203. Comfortable operating environment, self-orientating device, reeving technique and German centralized lubrication system reduce the working intensity and embody ergonomics of design.

204. The lubrication performance of the lamellar liquid crystal with different compositions was investigated with a high speed ring on block friction and wear tester.

205. First of all, compressor lubrication oil pump is usually composed of spindle drive of the compressor.

206. This paper inquires into the lubrication condition, wear process and mechanism of rolling bearings in fatigue tests with the help of SEM, EDAX, and surface contourgraph.

207. Dilute petrol stations for continuous lubrication to reduce downtime maintenance time.

208. Provides continuous lubrication and delivers exactly the right amount of grease to each lubrication point.

209. The importance of correct lubrication of the rock drill cannot be over-emphasized. In adequate lubrication accelerates wear and can ever lead to breakdown.

210. Made of high quality hydroisomerization base oil, import composited agent, and the ceramic composite of lubrication factor.

211. There are complete specifications. Powerful Motor can be started by centrifugal switch. It's equipped with automatic knife grinding device and lubrication system.

212. Black oxidizing or phosphatizing processes for improving the running-in behaviour or the capability to run without lubrication have been in use for quite a long time.

213. The elastohydrodynamic lubrication effect of the static back journal bearing used as supporting part was analyzed.

214. It adopts ball and needle bearing with fine lubrication, little attrition, little attrition, Iow noise and long life.

215. Gear transmission uses circulating lubrication oil supply system to minimize noise and extend service life of gear and improve the precision of chromatic printing.

216. This lubrication film is easily established with "straight line enveloping screw pair" rotors, but this kind of engagement pair is very difficult to machine.

217. The guide rail, the ball bearing guide screw has corresponding installments and so on lubrication, protection.

218. In all parts of the pump lubrication pump working in the media and automatic reached by output.

219. Also be used in hydraulic system of machine tools having same slideway & hydraulic lubrication system.

220. Main shaft adopts automatic returning lubrication system to free operator from the worry of negligent lubrication and basic part damage.

221. Use of industrial diesel oil, four-stroke, turbocharged, direct injection. High-pressure lubrication system. , Optional open or closed cycle.

222. Tears provide lubrication, reduce the risk of eye infection, wash away foreign matter in the eye, and keep the surface of the eyes smooth and clear.

223. The most effective method is the systematically synthetic application of oil physical and chemical analysis, oil spectrographic analysis, wear particles ferrographical analysis and lubrication sys...

224. To facilitate efficient lubrication, all multi-row full complement cylindrical roller bearings have lubrication holes, or an annular groove and lubrication holes in the outer ring.

225. Strength design from considering the tooth surface pressure lubrication condition and dedendum intensity of two aspects.

226. In this paper, crankshaft-bearing system is taken as the research object, and the lubrication performance of crankshaft bearing considering crankshaft deformation under the actual load is analyzed.

227. Therefore, the research of oil mist lubrication is attracting more attention.

228. Clean: No smeary problem will be occurred for the lubrication in gearless driving and hydraulic grease in hydraulic driving system.

229. The relation between the setting position of the lubrication cooling channel and the specific pressure is discussed in detail.

230. The infinitely long linear pad bearing lubrication problem is solved theoretically.

231. Service life of guide roll of mill is raised by self - lubrication antifriction of metal sulphides.

232. May be applied by any conventional methods , such as hand oiling , appliance oilers , circulation and centralized lubrication systems.