(1) Lower power loss material with high saturation flux density.

(2) The power loss of life is not a pity.

(3) By installing air cooling system and decreasing power loss of gas combustion turbine, our company ensures the compressor bundle stable and long term operation at 100%.

(4) The power loss is lower than NH2B material with high saturation flux density.

(5) Governing harmonics well, not only can reduce the power loss, but also could extend equipment life, improve the electromagnetic environment, improve product quality.

(6) The result shows that friction power loss of mechanical seal is less than that of O - ring.

(7) A much smaller power loss occurs in the cable when energy is transmitted at high voltage.

(8) The secondary discharge is an important factor for power loss in the high-voltage and high- power solar cell array.

(9) The optimization can reduce the inductance value power loss, especially in large - or medium - power applications.

(10) Not only possesses LPL-IGBT lower power loss but also the other capacities are no better than NPT-IGBT such as break down voltage, current capacities, safe operation area and cost.

(11) Less power loss and minimum thermal effect to peripheral components.

(12) Otherwise the resulting power loss of the arrester could lead to its thermal runaway.

(13) In this thesis, the objective function is to minimize the active power loss. The node voltage of system and reactive power of generator, which are step beyond the boundary, as punished functions.

(14) The digital hygrometer designed in this way has features of simple configuration, less surrounding elements, powerful antijamming ability, little power loss, high reliability, rapid response and etc.

(15) The method of design high frequency transformer in half bridge inverter circuit is introduced exampled in detail, besides temperature rise and power loss are discussed.

(16) Furthermore, the control units have zero crossing triggering circuit and adopt a novel structure of SCR in parallel with contactor to solve the problem of on-state power loss in SCR.

(17) I'm thrilled about this number because even though rubinius MethodContext's are first class, they're still 3 times faster with no programming power loss.

(18) The operation of unbalanced three - phase loads of distribution network will increase power loss.

(19) Aimed at a designated grid[sentencedict .com], two kinds of incremental power loss curves are studied.

(20) Second, the power electronic devices work on the zero voltage and zero current sate by applying soft switching circuit, so the power loss is reduced greatly and the efficiency is increased.

(21) Journaling file systems provide reliability and protect against corruption in the face of system crash or power loss.

(22) This networked way has the advantages of low cost, less disturbance, low power loss, free networking and non-operating cost.

(23) The pump performance would be affected by the two clearances in such a way that the clearance alters both volumetric leakage power loss and mechanical power loss (dick friction loss of impeller).

(24) The stepper driver guarantees stepper running high - efficiency and lower power loss.

(25) It is designed with many intelligent functions as multi-sensors, large-capacity memory, dynamic displaying, data protection during power loss, automatic watch and communication with PC.

(26) The liquid-crystal display has the low voltage, the low power loss characteristic, matches with the CMOS integrated circuit.

(27) This paper emphasizes the research on IGBT limiting current and on - state limiting power loss.

(28) Based on the acoustic power measurement with variable-load method, the experiments verified that the modified acoustic amplifier can decrease acoustic power loss effectively.

(29) Wide working voltage range . Wide frequency range . Good heat balance. Low power loss . High efficiency.

(30) Its main transformer is made of imported cold rolled silicon steel, So its power loss is little with low no-load current.

(31) The minimum power loss theory is used for obtaining the variety curve description of the clearance and the distance away from the injection gate.

(32) In the end, to lower the power loss on MOSFET, another optimizing principle based on the selection of superior load curve of MOSFET was proposed.

(33) Then the constitution, cause, theoretical calculation method of power loss and the coil temperature rise characteristic are analyzed.

(34) The self-adaptive reclosure, which is aimed to distinguish the transient fault and the permanent fault, can reduce the power loss caused by faults and enhance the stability of power system.

(35) Objective introduced in this paper is active power loss minimization and movement minimization of control element, and at the same time SCOPE software is used as a computing tool.

(36) By using the fast switch, the power loss of the FCL in normal operation condition could be avoided, and by using the GTO, the rapid current-transferring could be realized with a smaller difficulty.

(37) Currently, improving voltage quality and saving power loss have been job emphasis of power companies.

(38) To have power loss analysis is very important for designing and optimizing the circuits.

(39) The no load power loss of the plate friction clutch in disengagement affects the transmission efficiency, the heat value and the life of the firection plates.

(40) Coalification oxygen did not take over the station, oxygen production has been the use of mechanical compression air separation oxygen, power loss and annual maintenance cost of large equipment.

(41) Idle is rough, and high - speed miss and power loss may result.

(42) But there is also escapable and unreasonable part in power loss. Therefore, how to reduce power loss to its minimum level so as to realize maximal economic benefit is the aim of power loss analysis.

(42) is a sentence dictionary, on which you can find nice sentences for a large number of words.

(43) DD862 single phase watt-hour meter is an induction meter which is applicable to measure the rated frequency of 50 Hz , and power loss of single-phase intercourse grid.

(44) The complex method is applied to the optimum design in which the total power loss per unit load capacity is regarded as an objective function.

(45) Reactive power optimization and reactive power compensation in electric power systems are the efficacious means to elevate operation voltage, reduce power loss, and increase the stability level.

(46) Forward Voltage Drop Power Loss, High Efficiency, High Surge Current Capability.

(47) The dynamic model focuses on the mechanical analysis of the swash plate and the shaft, analyzing the power loss.

(48) A weighted average objective function with voltage balance index and power loss is established.

(49) This software has functions of graphic editing, network topological analysis, power information database management, power flow calculating, power loss and reactive power optimization analysis.

(50) Low-power switching power has characteristic of Low Power Loss, high rate of conversion, small size and light weight.

(51) This paper is to introduce the application of Tektronix TDS7000 Digital Fluorescent Oscillometer in measuring and analyzing the power loss of switching supply.

(52) With MOSFETS soft-switched, the switching power loss of MOSFETS, the ohmic loss and the iron loss of coupler core was reduced. It had large importance to improve the whole efficiency for the system.

(53) The ratio of the average power loss to the power loss under peak loading.

(54) The tertiary voltage control module gives the reference voltage curves of the pilot nodes by a power loss least based optimal power flow (OPF) calculation.

(55) We have calculated plasma density distribution, temperature distribution, impurity radiation power loss in SOL with friction.