1 All vehicles come with a catalytic converter as standard.

2 A catalytic converter will cut out 90% of carbon monoxide emissions.

3 Every Saab now has a catalytic converter.

4 Catalytic converter technology would be forced to advance at a much improved rate, showing that F1 does indeed improve motoring in general.

5 It will also be possible to buy converter boxes, estimated to cost $ 200.

6 The Tipo has a three-way catalytic converter and exhaust gas recirculation valve.

7 The converter had worked so effectively that he suffered only mild carbon monoxide poisoning.

8 Well, unless there is some kind of converter that I can get.

9 All 605s are fitted with a three-way catalytic converter, anti-lock braking system and an ultrasonic alarm as standard.

10 The remaining gases pass through a catalytic converter to further reduce pollution.

11 Our engineers have incorporated a 3-way catalytic converter into an advanced engine design that reduces toxic gases by up to 95%.

12 Cable TV subscribers get a converter that unscrambles the pictures.

13 This innovation employs a specially coated storage catalytic converter.

14 Application function of carbon steel converter subsystem is given.

15 The circuit structure is using a fly-back converter voltage.

16 Power electrical converter is the only feasible interface.

17 Purpose: UHF frequency converter, local oscillator, wide band amplifier.

18 Euro double screen calculator, converter, color box packing.

19 And if your car is fitted with a catalytic converter, Shell Advanced will help enhance the catalyst's performance.

20 Then it is combined with hydrogen in a catalytic converter to produce methane gas and water.

21 We worry about buying a new television or, at the very least, a converter box for our current set.

22 Budapest Municipality will pay half the cost of fitting a converter, but many may prefer to upgrade to new cars.

23 Examples used to illustrate the theme included photographic film and a sectioned catalytic converter.

24 People must buy either a new digital television or a converter box to use with their old set.

25 Budapest is to ban all cars with two-stoke engines from the city centre unless they are fitted with a catalytic converter.

26 As you'd expect, being a Saab, it runs on unleaded fuel and has a 3 way catalytic converter.

27 Because no other small cars come with a catalytic converter as standard.

28 Presently, the V-chip sits in a set-top box akin to a cable converter.

29 The V6 engine also features exhaust gas recirculation, an oxidising catalytic converter and a maintenance-free diesel particulate filter.

30 When an imperfect contact between two devices - for example between the thermistor sensor and the A-to-D converter port - occurs, the detected temperature may become like this pattern, as shown here.

31 In this system, high precision thermocouple digital converter chip MAX6675 is adopted.

32 An ADC designed in accordance with the techniques described herein utilizes a quantizer that has a lower resolution than a digital-to-analog converter (DAC) used for negative feedback.

33 In this paper, a novel ZVS full-bridge three-level DC/DC converter with clamping diode is presented, and its principle is given.

34 Image Data Converter SR Version 3.2 now features new algorithms that significantly reduce image noise at high ISO settings when converting RAW data to JPEG files.

35 Haohua astronavigation chemical co. , ltd. adopts high voltage frequency converter for motor speed adjustment of water circulating pump and achieves obvious effect.

36 The paper gives a way to reduce the dynamic error using A/D converter in the threshold circuit.

37 With the increase of the portable electronic products, the demand of micropower, high-efficiency and small DC-DC converter has been enhanced.

38 The effect of converter steel slag powder(CSSP), on the shrinkage characteristic of hardened GGBFS-PC mixed mortar is studied.

39 The structure, working principle and features of the hydraulic torque converter are introduced.

40 Step five: tune the final stage power transistor quiescent current, the current value of the power tube by measuring the voltage of the emitter resistance Converter and get.

41 SBYB - 465 K two - impeller torque converter is made on the basis of the improvements of existing converter designs.

42 Soft-switching technique can help improve the efficiency and power density of the converter by reducing switching losses.

43 CMOS ramp-wave generator based on a conventional multivibrator is designed and optimized to offer the ramp-wave for slope compensation in a peak current controlled PWM BOOST DC-DC converter.

44 The power board and the capacitance board are formed a reverse L-shaped grafting structure along the radiator,() which makes full use of the inner space of the frequency converter.

45 It researches the technology of producing ferroalloys with converter oxygen blowing method.

46 A synchronous converter working in double peak mode is introduced.

47 The air guards the catalytic converter from overload and possible resulting damage.

47 is a sentence dictionary, on which you can find good sentences for a large number of words.

48 A resistance - to - frequency converter using a bridge amplifier , an intergrator and a comnparator is described.

49 A high - voltage output flyback converter operating in DCM was designed.

50 Purpose: Battery management; High speed switch; Low power DC to DC converter.

51 Matrix rectifier is a true four-quadrant buck AC-DC converter, and it is can be applied in all kind of DC power supply fields powered by three-phase mains.

52 The production practice shows that the optimized slag compositions can obviously increase the converter lining life under other equal conditions.

53 It is widely taken that the maximum value of the voltage transfer ratio of AC-AC matrix converter is 0.866, which has considerably restrained its application breadth.

54 A constant input is especially required in a successive approximation converter because the input is compared with a reference several times over the conversion period.

55 Signal amplifying and controlling system is mainly composed of voltage amplifier, sampling hold circuit, multi-channel simulating switch, A / D converter and 8031 chip microcomputer.

56 A mathematical model was established to simulate the light - off performance of a catalytic converter.

57 The SCR catalytic converter uses the ammonia to transform nitrogen oxide into nitrogen and water.

58 Siemens PLC S7-200 as the control center, Anchuan F7 frequency converter as the implementation devices, it realizes changing frequency velocity modulation control for automatic washing machine.

59 The I-V and V-F converter design for mode of feedback current amplifier is introduced. Method of reducing noise disturbance is discussed in detail.

60 The molten steel composition adjustment model for LD converter based on minimum alloy cost is designed and applied to on line control of steelmaking process in Baosteel.

61 For isolated-type symmetry half-bridge bidirectional converter with phase-shifted control, a simplified circuit under 4 modes using the primary windings of transformer as reference object is built.

62 A compact and well performance soft star circuit is designed for monolithic DC-DC converter to eliminate strike-voltage and depress surge-current.

63 Combining to devise radio telemetry receiver, the application of digital down converter and frequency demodulation in software radio is discussed and analysed.

64 Another alternative is to directly connect the converter to the processor's data bus.

65 The successive approximation converter is of medium speed, and average resolution.

66 ADS7817 is a new type 12 digits, low power consuming Analog-Digital converter with serial interface, its connection is very easy and it is of micro-package.

67 By using carrier phase-shifted SPWM control, the multi-modular converter can get low AC side harmonics even the switch frequency is low.

68 Signal amplifying and controlling system is composed of Voltage amplifier, sampling hold circuit, multi-Channel simulating switch A/D converter, shaping amplifier and 8031 chip processor.

69 Detailed operation of the secondary side post regulation application in flyback converter is discussed.

70 This is right medium or small converter steelworks is more appropriate.

71 The article briefly introduces the control mode of the converter tap changer control system, which is including manual control and automatic control, and explain their control characteristic.

72 The prepared copper oxide nanometer array can be applied to display apparatus, electric light source, electric-to-optical transducer and thermoelectric converter.

73 A charge scaling D/A converter with capacitor voltage divider is designed, which extends the resolution of a parallel D/A converter as well as reduces the chip area greatly.

74 The operation performances of phase-controlled cycloconverter relate to the circuit scheme of the rectifiers in the converter and the methods controlling phase.

75 The operation principle is analyzed, the influence on FAC converter introduced by IM is described and the design rule of IM is presented.

76 A multi-resonant DC/DC converter, which is very fit for ultra-high frequency applications is analyzed.

77 It is very convenient to use serial peripheral interface (SPI) technology in the application of interface between highspeed serial A/D converter AD788 and AVR chip AT90S8515.

77 Wish you can benefit from our online sentence dictionary and make progress every day!

78 The distance between the two converter stations is 420 kilometers. Power cables will be laid beneath the Tyrrhenian Sea at depths of up to 1,600 meters.

79 Efficiency test needs to be carried out in the performance test of HV frequency converter system, and the method for efficiency test in the performance test of frequency converter will be discussed.

80 The transmission of an automobile engine is often called a " torque converter ".

81 Especially three-phase converter which has the advantages of bi-directional power flow, low AC harmonic and unit power factor, becomes the researching hotspot in the field of power electronics.

82 The cementing active minerals could be selectively separated from the converter slag through grinding.

83 In addition, a number of developments of gas recovery control for converter are also discussed.

84 At the same time, in order to meet the need of fast measurement, pipeline analog-to-digital converter ADS800 is selected to convert analog signal of pressure.

85 A monolithic current mode DC - DC buck converter with internal compensation is presented.

86 This study presents a new single - stage single - switch PFC flyback DC converter.

87 Torque converter used in SD 7 bulldozer is power separating hydraulic - mechanic type.

88 It does depend upon an image converter if imagescaleing is on.

89 The converter features no switching losses from zero-load to full-load operation and low conduction losses. It is suitable for high input voltage and high power applications.

90 The causes of excessive high oil temperature in practical work process of torque converter of loader.

91 In this paper, a resistance - to - frequency converter consisting of a Wheatstone bridge followed by an integrator and a comparator is described.

92 In this paper, a design method and the operating principles of pulse transformer in forward converter are presented, and some problems to be considered are pointed.

93 This paper described the experimental results and theoretical analysis on slag formation using converter slag in place of lime stone flux prior to oxygen melting.

94 In order to reject the zero sequence and negative sequence disturbance due to unbalanced load, a solution using two-stage four-leg matrix converter based on carrier modulation strategy was proposed.

95 The products could be uncoil automatically by the uncoiler which was drove by frequency converter.

96 The DC-DC converter chip can be detected on each channel of the current in order to obtain accurate current on each channel of information, and to share better and protect circuit.

97 Performance of flyback converter with DCM and CCM is compared , methods of selecting operation modes according to the load are pointed out.

98 The finite difference beam propagation method ( FD - BPM ) is used to design a device of 66 % MMI - converter - Combiners.

99 H-bridge multi-level converter has the advantages of needing the fewest switch, easy to modularize, easy to digitalize and easy to take soft-switch technique in the numerous multi-level converter.

100 A new type of four-frequency parametric converter is designed according to the different roles of the frequency components in the process of frequency trasformation.

101 The course describe "power electronic converter and its control system", and instruct the control system of the SCR commutate circuit, passive inverter and its circuit.

102 The electric control system of the equipments for converter smoke purification and gas recovery is introduced.

103 This DC-DC converter chip can control a two-phase converter work automatically, which can provide a large output current, but has low power dissipation.

104 Digital scan converter (DSC) is an indispensable part in the display equipment of radar, biomedical ultra sound detector, sonar, electronic surface analyzer.

105 But, despite its merits, the traditional single-ended forward converter has some shortcomings, such as simple circuit, low parts count, low output ripple, etc, it also has some shortcomings.

106 The thesis describes the design method of AOTF's waveguide, mode converter and mode-splitter, and gives the design results.

107 The detailed operating principles and design criteria for the presented converter are described.

108 A 10-bit monolithic D/A converter with R-2R ladder and CMOS analog switch structure is presented in the paper.

109 This thesis does some corresponding researches and application works for the Tracking-Control System, the Thermoelectric Converter,(http:///converter.html) the Electric Power Transducer and the AC Stabilizer of the system.

110 In most nuclear power plants in China, the pump speed is regulated by hydraulic torque converter.

111 Nitrogen converter lining protection technology by slag splashing is an advanced technology to remarkably enhance service life of the converter and reduce production costs.

112 This system mainly contains a single chip, a signal converter, a synchronous circuit and a pulse magnifier circuit.

113 In 1997, the converter steel of Liu Gang was realized 100% continuous cast.

114 HVDC test is one of routine tests on the converter transformer.

115 Returns a collection of standard values for the data type this type converter is designed for when provided with a format context.

116 Using the HS1100/HS1101 capacitive humidity cell and the A/D converter CC7107 etc, this article designed a low cost and digital-displayed humidity measurer.

117 Converter slag is the one of three industrial wastes. Utilization ratio of steel slag is only 50% in China, Which is less than that of developed countries.

118 A 12bit parallel capacitor scaling Digital-Analog Converter (DAC) is realized using the QFG fully differential op amp.

119 Another reason for banning lead in gasoline is that the lead can ruin the catalytic converter.

120 The high level of HC in the exhaust gas may damage the catalytic converter.

121 The utility model is provided with an oil flow monitoring circuit and comprises an oil flow sensor signal-input circuit, a voltage-frequency converter, a central processing unit and a power supply.

122 To the most potential variable-speed constant-frequency doubly fed induction generator, the device of power electronics converter used to control rotate speed is analyzed.

123 A clock or a strobe signal is used to synchronise operation of the comparator, the up-down counter 102 and the digital to analog converter 100 so as to avoid these components racing.

124 It probes into main factors affecting sulphur content in medium carbon ferrochromium in converter practice, points out measures to decrease the sulphur content.

125 The free calcium oxide and the periclase formed in the converter smelting process are primary factor affect the steel slag long-term unstable.

126 Combined production practices, research is done on the high-quality lime which produced through rotary kiln for converter steel making at Bengang.

127 The paper introduces several important techniques applied in modern electric propulsion, such as electric motor, power electronic converter and harmonic mitigation as well.

128 TEMCo Frequency Converter Motor Generator sets are the answer to bridging this gap.

129 A method of design of F/V converter based on 80C196KC microcomputer is presented. The hardware configuration and software flow diagram of the system are preferred.

130 The invention relates to a generation method of signal with continuously variable amplitude without the use of D/A converter.

131 Laboratory and industrial scale experiments have been conducted on the hot metal desiliconization using Baosteel converter slag based desiliconizing reagent.

132 The thesis firstly analyzes the converter principle of operation and the circuit characteristic(), used the PSPICE software to carry on the simulation analysis to the main circuit.

133 The three phase converter soft switch control can be realized by avail of resonant DC link.

134 The behavior of matrix converter ( MC ) was investigated under an unbalanced input voltage condition.

135 To reduce the power dissipation and chip size of digital calibration circuits of pipelined analog-to-digital converter(ADC), a new statistics-based background calibration technique is presented.

136 This paper presents a current-fed Z-source AC/AC converter system used for general-purpose motor drives.

137 The UHVDC converter substation is quite different from traditional ones, so it's necessary for carrying out specific research of main electrical scheme and equipment parameters.

137 try its best to gather and create good sentences.

138 By comparision of various methods for power regulation. A Buck converter scheme is adopted.

139 The studied converter consists of three half-bridge switch legs, three isolated transformers, a three-phase diode rectifier and an output LC filter.

140 Completed the design of servo control card which including the DSP minimal systems, rotary encoder module, D/A converter circuit using the TMS320LF2407A as core control chip.

141 The controller circuitry coupled to the converter controls the switching circuit according to the feedback signal so as to control the power to the load.

142 Among the modulars, input modular is used for accepting analogue signal, sampling holding and D/A converter.

143 This dissertation presents a novel multi level bidirectional DC - DC converter topology and the relevant control strategy.

144 So establishing communication between systems employing different protocols. A media converter is a example of a sophisticated form of protocol converter.

145 The result indicates that temperature at the inlet of catalyst bed is the most optimal control parameter to realize the optimal operation of ammonia converter.

146 In the MATLAB, using a structured design method, a dual PWM converter control system model were established on the basis of the stator flux field vector control technology.

147 This converter deals with grouping (such as commas), number of decimal digits, currency symbols, and such.

148 The mechanism of DC biasing for output transformer of SPWM switching converter was analyzed.

149 A planar structure V band up converter has been presented.

150 BUCK converter is a kind of typical piecewise-smooth dynamical system. Changing the circuit parameter, much dynamical behavior can appear. The dynamical model of the circuit was constituted.

151 One of the most important elements of the LD converter equipment is the suspension system.

152 Thirdly, it has put forward and designed the dual PWM converter with the capacity of energy flowing bidirectional aimed at the demand of rotor energy bidirectional flow.

153 The finite element software of simulating the working process of catalytic converter is developed.

154 A novel topologic structure of high frequency AC pulse density modulation converter is proposed, and its operation principle, control scheme and design are described in detail.

155 Single-chip microcomputer system includes the MSP430 processor, SPI interface, True RMS converter chip AD536, ADC AD7711, brown-out protection and reduction, as well as show circuit.

156 Models of monolithic catalytic converter for controlling automobile emission are reviewed in detail.

157 Most of traditional data collection systems are based on RS232/485 converter. Such a system can only realize the point-to-point connection and its branches cannot work independently.

158 The whole circuit consists of Sample and Hold Circuit, the Multiplicative A/D Converter, the Sub-ADC, the Digital Calibration Circuit, the Clock Generator and the Time Synchronizer.

159 During the so-called braking of the motor, the power flows from the ac side to the dc side of the switch-mode converter and it operates in a rectifier mode.

160 The importance of implementing fast aging method for catalytic converter is firstly described in this paper, then the fast aging test equipment and test procedure we adopted are introduced.

161 Programme using three - phase asynchronous motor synchronous transmission programme converter and PLC.

162 Currencies - automatic currency converter which uses local exchange rates.

163 A voltage-to-time based windowed analog-to-digital converter (ADC) can have programmable reference voltage, conversion time, and accuracy of voltage regulation.

164 APPLICATION: Apply to concrete mixer, Bitumen mixture equipments, Equipments of converter or blast furnace burden and other equipments with burden need.

165 This paper first describes the effect of evaluation conditions on the catalytic converter performance.

166 Because of the use of frequency converter, so that pump speed decreased, exports to reduce stress, a reduction of mechanical wear, reducing maintenance workload, extended equipment life.

167 This DC-DC converter with transformer has a notable feature which is that possibility of magnetic saturation due to asymmetry of circuits or transient phenomena is greatly reduced.

167 try its best to collect and make good sentences.

168 In order to reduce the quantization error of pipelined A/D converter, a simple and efficient modified algorithm is presented.

169 The paper designed and realized 500w series-resonant power converter for inductive charging experiment system by using the leakage inductance as resonant component.

170 In view of saving energy and enhancing transmission efficiency, a new PLC and HMI based shift control to 4D180 hydraulic torque converter is proposed.

171 This paper describes the construction, operating principle, measurement, specifications and application of the 4BX2 micro stripe high speed X ray framing image converter tube.

172 It is the ideal material for improving the service life of converter lining.

173 And recommend the single - phasesingle - phase Converter and single - phase to three - phase Converter that transform from the Matrix - Converter.

174 By refining methods steels can be divided open - hearth furnace steel, converter steel, and electric furnace steel.

175 A single - end flyback converter with multiplexed output for IGBT drive based on UC 3844 is presented.

176 A variable speed constant frequency wind power generation system of doubly-fed induction generator based on converter excitation was described.

177 An average output power of the converter shaft must reach the Max.

178 The threshold voltage is set by output channel comprised of pulse generator, photoelectric coupler and F/V converter, and the detection result is input through photoelectric coupler.

179 It has been shown that the designed DC switching mode converter has a stable output voltage frequency, small ripple, high operating frequency and low power consumption.

180 Since the false target jamming will cause D/A converter overflowing, the thesis also studies the influence to false target jamming profile by D/A quantizing and amplitude limiting.

181 The total current and the probe-hole current are acquired by using an A/D converter.

182 The magnitude of deformation affects the performance of hydraulic torque converter and its connection with adjacent parts.

183 Fault detection circuit using Serial A / D converter chip TLC2543, the chip with multi-channel, small size, high price, particularly suited to the development of SCM data system.

184 This will also avoid that the widget converter and field validator get out of sync.

185 Secondly, it has put forward and designed the dual PWM converter with the capacity of energy flowing bidirectional aimed at the demand of rotor energy bidirectional flow.

186 Now, the prediction model is applied in the assistant decision-making system for a copper converter.

187 This research is of directive importance for dephosphorization pretreatment hot metal with duplex converter in production.

188 Introducing an offset to increase the resolution of the conversion has been described with the specific case of a 12 bit converter with 3 correction bits in mind.

189 The exhaust system uses a single muffler with a single monolithic - type catalytic converter.

190 A high-speed high-accuracy partially-cascaded A/D converter is developed, which is used with the telescope for observing the solar magnetic field.

191 The temperature of converter shell rises sharply with the utilization of MgO-C brick lining, it results in the shell permanent deformation.

192 If a catalytic converter suffers road damage, the monolith inside can be cracked.

193 The component is the catalytic converter, which has a mandatory part of exhaust systems since 1975.

194 The main equipment such as stainless steel converter, fire tube boiler, main blower and concentrated acid pumps were made at home.

195 In this paper a new voltage compensator in electric distribution system is discussed, the design employs a PWM AC-AC converter(4, IGBTs per-phase) along with an auto-transformer.

196 Most analog displays use a digital-to-analog converter (DAC) to generate each color video voltage.

197 The results show that the efficiency approaches to that of the caesium thermionic energy converter.

198 The catalytic converter can also be destroyed by excessive engine vibration.

199 One of these constraining factors is self generated noise within the analog to digital converter.

200 One design method of composite video signal generator using high-speed D/A converter was proposed.

201 The paper discussed a half - bridge converter of single stage PFC with ZVZCS.

202 Based on one-dimensional flow theory, the dynamic characteristic of the tractor-brake hydraulic torque converter was analyzed.

203 On this basis, calculated and test the rotary actuator's position which controlled by magnetic current converter brake.

204 It is used for converter steel making, through the splashing cross to protect the furnace, which can raise the furnace life.

205 In the 2st part, the principles of converter gradient control, oxygen lance control, material loading control and dust exhaust control are described.

206 The automatic control of frequency converter in dryer system are pointed out.

207 This paper presents a well water temperature monitor, and its use of PN junction temperature sensor as temperature components, integrated circuits used for ICL7126 and other A / D converter.

208 The working principle of the single - phase voltage - source 4 - quadrant converter is introduced.

209 The principle of 3-3 matrix converter(MC) based on direct transfer function control is studied and the control process of the matrix converter based on this control is deduced.

210 The analysis of transient behavior and dynamic performance plays an important role in the research and design of switch converter.

211 A power supply comprises a thermoelectric generator, an initial energy management assembly, an electrostatic converter and a final energy management assembly.

212 The wave shape measured indicates that the converter outputs the exact square pulse current with a peak in each front edge of pulse which is the benefit for arc stabilization.

213 These key components generally include the antennas, analog-to-digital converter (ADC) and DSP hardware module, etc.

214 The leakage inductance of transformer has huge influence on the energy returned stage of double - flyback converter.

215 This method has been for many times used for date-processing in tests of hydraulic torque converter and proved to be useful and effective.

216 The high-frequency transformer which uses two windings in parallel with power converter, together with the use of interleave control will split input current and raise the efficiency of conversion.

217 It's the product of efficiency for hydraulic torque converter and planetary gear - box.

218 The protocol converter has been tested in actual project, experiment result shows that this system runs, and realizes the remote monitoring of serial devices.

219 Power Train Twin turbine torque converter, which employs CAT technology, and the power shift transmission features compact structure, high efficiency, reliable performance, and operational ease.

220 A step-down converter of low-noise and PWM is designed, simulated and analyzed in this article.

221 As a special interface connected with analog and digital circuits, high performance analog-to-digital converter is much more important in whole system design.

222 The mode of vanadium slag phase production includes mainly vanadium converter slag and vanadium slag atomization.

223 The use of exhaust paste before the catalytic converter can also cause the monolith to break.

224 An electronic circuit which may be applied to the control of firing angle of high voltage mercury arc current converter is suggested in this paper.

225 A presentation is given of the configuration, characteristics and use in actual production of the internals of a bidirectional flow cross heat exchange ammonia converter.

226 The transformer in this converter needs no magnetic flux reset coil and has high utilization factor of the magnetic core.

227 Thereafter a waveform sequence is input into the digital-to-analog converter (100), wherein the waveform sequence has a zero offset at the boundary.

227 is a sentence dictionary, on which you can find good sentences for a large number of words.

228 The paper describes a silent voltage source PWM frequency converter. Its main circuit uses novel full controlled devices bipolar static induction transistor(BSIT) and static induction thyristor(SITH).

229 Steel converter is the main equipment in steel-making, and the drive mechanism, trunnion bearing, is the key component of steel converter.

230 The designed converter could operate well with a slender supply voltage signal because of its high input resistance and low offset drift.

231 Electric wheel spindle is used in M215A highspeed internal grinder, which acquire high frequency electric power supply from static frequency converter.

232 As a serial-to-Ethernet converter, the EM203A allows you to quickly network-enable practically any serial device.

233 A kind of homogeneous barium-based slag ball used in converter process, belong to slag material used in converter process.

234 A new approach of digital scan converter for medical ultrasonic imaging system is proposed.

235 To adjust tachometric of spray gasoline pump, the speed control system of frequency converter is needed that can control the machine's tachometric and improve the control precision.

236 A flyback converter with zero current switching ( ZCS ) resonant and power factor correct ( PFC ) is proposed.

237 A multielement cascade resonant converter is presented in this paper, which improves the performance by combining the characteristics of series resonant converter and parallel resonant converter.

238 It is compared with conventional direct paralleled multi modular converter structure. The results of simulation are presented.

239 The application and effects of the wet plate-type dedusting technology in converter gas dedusting of the Gas Power Plant are described, and notable problems in use are raised.

240 We have adopted a multi-phase DC-DC converter structure to supply the positive and negative voltage source for the panel, and decreased the operational frequency of the charge pump.

241 The wind power converter must possess abilities of Low Voltage Ride through (LVRT), available operation with unbalanced voltage fault and adjusting active as well as reactive power.