1 A pulse appears in the half cycle of current in uniform glow discharge of helium and argon.

2 The single current pulse in a half cycle can't be treated as criterion of uniform discharge in high frequency operation.

3 To study the influence of the tooth contact half cycle (TCC) steel plate on cortical bone blood supply at the fracture site.

4 Since heating power is symmetric for each half cycle of applied voltage, the principle component of this hum is twice the line frequency (and even harmonics of the line frequency).

5 Also the process of hydrogen evolution during cathodic half cycle played a dual role (i. e. promotion and impediment) in anodic pitting during AC etching of aluminum.

6 The results of simulation prove that the Half Cycle DFT algorithm for active power filter has a good performance.

7 During the half cycle of cooling, the sample tends to restore its original shape. However, because the plastic compressive deformation formed before cannot come back, the crack opens gradually.

8 This still enabled each half cycle to complete its loop through the one-half of primary in the plate circuit and one-half in the cathode circuit.

9 The AVR performs this function by controlling the duration of the current through the inductor on each half cycle via the thyristors.

10 The results show that the multiple current pulses appeared per half cycle due to the feedback electric field generated by charges accumulated on the dielectric surface.

11 By researching the magnetization process and remanence characteristic of the core, the magnetic exciting status of winding the current wave of the system during the half cycle is analyzed.

12 Effects of major parameters (equivalence ratio, flow rate and half cycle) on the NO, CO emission were observed and analyzed.

13 Under the same discharge conditions, the numbers of current pulses per half cycle for helium discharge are more than that for argon discharge.

14 A sequence of discharge current pulses of the argon plasma jets has been characterized for each half cycle. The nature of the discharge multi-pulses have been investigated schematically.

15 By finding the derivatives of the phase differential currents of the magnetizing in-rush currents and then comparing the first half cycle with the second half.

16 The dead-time effect is evaluated by averaging the voltage deviation over a half cycle of the inverter.

17 The smaller the gap width, the bigger the number of current pulses per half cycle.

18 The balance process of the magnetic potential self-balance circuit for the single core during half cycle was discussed.