1. The girder is square in cross-section.

2. There was blood on the girder where Gazzer's hands were sliding helplessly down ....

3. A girder is a beam that supports other beams or is made up of separate beams joined together.

4. Daak had stopped half-way up the girder and, holding on with one hand, was flailing the air with his chainsword.

5. A wrought-iron girder swing bridge at the Northern Entrance Lock may be the original installed by Brunel.

6. The longitudinal girder forms part of the parapets.

7. The girder is braced against an erection bracket.

8. A steel girder may warp in a fire.

9. A two-span continuous curved box girder model was made with Perspex.

10. Now, the segment girders are used more and more. Guangzhou metro first use the segment girder technology cosmically in urban railway traffic, obtain primary fruit.

11. Main diseases and reinforcement method of current box girder web plate are discussed, after years of service.

12. Most often this involved a segment of a girder web.

13. Analysis is made on the formations of wave girder hot-dipped galvanization disfigurement, resulting from silicium and ferrum, and provided the preventions.

14. As the train approaches a junction, a second bottom girder supports the train on both sides.

15. When the neighbouring Skerne Ironworks closed in 1879(), Wilson's decided to expand into the empty bridge girder manufacturing market.

16. It went on a line into the stands and hit the same upright girder.

17. The lower props are horizontal; the topmost prop is curved to follow the line of the girder.

18. They would strengthen the bridge without making major changes in the steel girder system above that might look out of place.

19. Above it, is a cloud so dense it appears to be like a girder, half of it molten.

20. Based on the elastic concept this paper proposes the chart analysis method for estimation of seismic response of the selfanchored suspension cable bridge with steel box stiffening girder.

21. This paper has introduced how to use the graph theory method to calculate the sectorial coordinate of the variable cross-section box girder.

22. Comparison between experimental and computed results proved the effectiveness of this analytical method in the three-dimensional analysis of skew box girder bridges.

23. Some suggestions of cantilever installation of steel box shaped girder are given.

23. is a online sentence dictionary, on which you can find good sentences for a large number of words.

24. Based on construction examples, this paper introduces the calculating method of steel strands length and bend up angle of skew box girder.

25. In recent years some new profile steels are used for main girder of domestic made electric single girder overhead travelling crane.

26. In order to evaluate correctly the bearing capacity of one grade separation bridge, the field static load test of an unbonded prestressed concrete box girder in the bridge was carried out.

27. Electric Motor Grab: Equipped a winding structure on the deck girder and taking the winding wire rope as the closed rope, It can work as a long stay bar grab...

28. The boundary conditions of the fixed end of the box girder are discussed and an illustrative example is hereby given.

29. This paper presents a method that the reasonable inclined cable forces during the construction process are determined by the target configuration of girder.

30. So it is necessary to do some further researches in thin-walled box girder, especially in multichambered thin wall box girder.

31. II. The super-structure applying double guiding girder assembled by 54-type Bailey Beams elaborates its characteristics and economizes the construction on a large scale.

32. In this paper, the computation principle and method of Pin-hole displacementcorrelated with load for military girder structure system are presented.

33. The paper carries out the range analysis and parameter analysis on RPC channel girder using ANSYS.

34. This paper introduce the calculational program of coping elevation for free plate girder curve bridge and resolve the handworked calculational defect, it will useful for improving work efficiency.

35. Sash Girder structures placed on slope face can induce self bearing capacity of soil, share partial load carried by anchor group and improve slope stability.

36. Pit-less type platform scale, checked iron surface plate (surface plate of SST models is smooth plate) combined with welding U-shaped steel girder formed a higher strength and reliable platform scale.

37. Following the process of construction, considering the worst loads, according to the assumption of plane section, the steel girder alone and the composite girder are computed respectively.

38. Using resistance target, a new mix design method for large - span concrete box girder was put forward.

39. The theorem creates conditions for unitedly treating the design of straight and curvedprestressed girder bridges by computer.

40. There is typical loess ravine terrain, more than ten large areas of the plateau, and is mixed plateau, ravines, girder, valley, flat plain, chain of mountains, slope in Qingyang research region.

41. The Zhanjiang Bay Bridge applies the Cable - girder anchorage with tensile anchor plate.

42. The theoretical research approaches involve arched girder load split process, rigid-body limiting equilibrium process, plasmodium process, reliability theory, etc.

43. Equipped a winding structure on the deck girder and taking the winding wire rope as the closed rope, It can work as a long stay bar grab.

44. Under superiority, under girder fine light the second half somewhat conservatively.

45. Progressive collapse method is used to calculate ship ultimate hull girder strength and the combination of surface response method and traditional method is utilized to analyse reliability.

46. A finite segment model has been negative shear lag in box girder with varying depth.

47. The scheme is a transition between the box girder with vertical piers and the true arch.

48. This paper proposes a general model of curved prestressing tendons in skew web of the curved box girder bridge, the effects of space curve on frictional loss have been analyzed.

49. With the development of high grade highway, prestressed concrete box girder bridges are adopted widely.

50. Not only limited in the hybridizing of the conventional girder and arch, the hybrid system arch bridges nowadays have had new hybridizing of arches with other types of structures.

51. By tests, the construction quality and design reliability are verified for the gantry crane girder.

52. The girder board and wall of a teaching floor have crazed, its girder board deflection is over criterion value, its stiffness is insufficiency. The building can not be used ordinarily.

53. The successful alternative was the cast - in - place segmental prestressed concrete box girder.

54. The imitated measure of structure component and the partition of the segment of construction were analyzed and discussed. Girder cell was used to imitate the cable cell, and the effect is preferable.

55. NASTRAN, and presents a handy and exact correction method, to eliminate the warp of moment of the deflective girder in the FEM results effectively, and get the preferable element forces in the girder.

56. Lastly design of P. C. continuous curved girder bridge is discussed in the paper, in especial prestress reinforcing steel bar's loss and bearing design.

57. And also, make a contrast of the freedom distortion circle and the girder - joint continuous model.

58. The overhead traveling crane used at a cold strip mill factory is given to study the deformation, stress distribution and load capacity of the main girder with 3D-FEA Shell-to-Solid Submodel method.

59. Based on this, the stability of the surrounding rock mass and the rock wall crane girder is evaluated.

60. River - spanning bridge is longitudinal asymmetry continuous box girder bridge which is difficult for construction.

61. The paper analyses the nonlinear cracking behavior of reinforced concrete box girder.

62. After finishing the detailed analysis and integral calculation of the aperture girder, then summarize relevant conclusion from main girder's aperture effect.

63. The calculation results and investigations show that overlarge local tension stress is supposed to be the main reason of slab cracks in prestressed concrete continuous girder bridge.

64. Finally giving an example of the configuration model of the main girder of the overhead traveling crane, the main idea of the new model is illustrated.

65. CONBOX is specifically developed for the analysis and design of post-tensioned and cast-in-place reinforced concrete box girder and slab bridges constructed on falsework .

66. The formula under given fracture length is verified by fatigue test datas of welded box girder on overhead travelling crane.

67. The stress variation of curved girder bridge caused by the central angle and the curvature are discussed. The results are important to the design of curved girder bridge.

68. This makes the box girder the ideal choice for bridges with any significant curve in them.

69. PC combining girder bridge with waving steel celiac board is a new type of bridge structure.

70. The third one is on the local forced performance of stay cable anchor block, studied from three ways as girder anchorage, cable tower anchorage as well as anti-sliding.

71. Stumps were inserted and welded between the two straddles so that the girders become an integrated arched girder.

72. The bridge structure is formed by the inside and outside arc end carriage and the upper and lower retractable main girder, with compact structure, light weight and beautiful and dignified appearance.

73. It is remarkable that setup of cross beam, length of curvature radius and eccentric distance of bearing affect internal force and deformation in curved girder bridge .

74. Precast girder segment is widely used in the construction of Hong Kong West Railway.

75. The influence analysis for new conformation form of vertical prestressed tendon offered referenced opinion for continuous system box girder in reasonable arrangement of vertical.

76. The paper discussed the sectionalization, the method for finding equation and the drawing of the envelope graph of bending moments of the simple crane girder under the action of crane loads.

77. The vierendeel sandwich plate is composed of cross vierendeel girder.

78. The handworked calculational way of coping elevation for free plate girder curve bridge in expressway have more repeated workload, slow footed and easy to make a mistake.

79. The deck is an orthotropic steel box girder of aerofoil shape with cantilevered cycle tracks and footway supported from the box.

80. It is a new method displacementform in analysis of shear lag effect on thin - walled box girder.

81. Obique bridge is made up of main girder crossbeam and bridge floorings.

82. And then contrast the computed result the plane's box girder, proposes some meaningful conclusion. "

83. So, the factor of shear lag of box girder is researched by using the principle of the stationary value of the total potential energy, FEM and model test.

83. Wish you will love and make progress everyday!

84. Based on the previous research, lattice girder reinforced shotcrete support is dealt with, and a method is set up to evaluate the safety of this kind of support for a tunnel in construction.

85. This paper elaborated on the resuming measurement of the temporary level spot of the construction altitude control of half rigid frame continuous box girder.

86. Compatibility will require that the girder deflection at B be zero.

87. The steel box girder was lifted and erected block by block by the hydraulic crane supported on the two main cables.

88. But setting of these abutments leads to more complex mechanics in cross diaphragm and box girder.

89. Often of fusion adjacent to girder web in the transverse groove welds led to the cracking.

90. Stiffening girder sections of suspension bridge are often connected each other by temporary connection during the construction.

91. Main girder and other components of overhead traveling crane are typical welded structures, the primary failure type of which is fatigue crack.

92. The ship's hull is a thin - walled box girder structure composed of stiffened panels.

93. A stiffness method for determining the response of shear lag effect on box girder is presented.

94. Then an example of retrofit techniques of steel truss bridge is introduced, in which the concept of damage control design is adopted introducing an girder floor isolation system and hysteretic damper.

95. The lower construction includes the gantry, slewing ring, traversing bogie and balance girder. The electric cable winder and central electricity transmission installations are also included.

96. Mobile belt tail piecespedestal main girder is a main support of the ambulant components and stageloaders.

97. The wind erosion of plough land in bottomland is 52.96% more than girder land and they are diversity markedness.

98. The hoisting capacity of that gin pole ( girder pole, guy derrick ) is sixty tons.

99. JBP Rules'main technical points are: design load, net scantling, direct strength analysis, hull girder ultimate strength, yield, buckling, fatigue etc.

100. To reasonably design the girder falling restrainer, the nonlinear seismic response of the restrainer was investigated considering the failure process of the bearings.

101. The effect of transfer girder on the structural behaviour of Multistorey Laminated Truss type Frame (MLTF) in high-rise building is analyzed.

102. By comparing the modeling analysis of grid frame method and single girder method of skew bridge, the instructional conclusion can be received.

103. In high-rise building, transfer girder co-works with the above structure(), which will form a drag bar arc system after crack appears on the bottom.

104. Patent application is pending for the Coupled Girder Moment Resisting Frame developed by our team.

105. The shear-lag effect on the prestressed RPC simply-supported box girder is studied by FEA method and energy variation method.

106. Steel through truss bridge has some excellence, such as low girder, light deadweight, high carrying capacity, comfortable travelling crane, short construct periods.

107. Construction technical of the elected bridge monolithic box girder was briefly introduced.

108. The paper checks the safety and stability of shoulder pole girder for hoisting large dynamotor stator with finite element software ANSYS.

109. The restrainer should at least afford the weight of the girder.

110. This paper presents the structure of bridge girder erection machine and the assembly of prefabricated sections.

111. Dreamt that I was enclasp the girder untenable at the top of the bridge, yet someone want to pull me down.

112. The invention discloses a lower flange improved corrugated steel web plate composite box girder and a construction method thereof, which belong to the technical field of bridge structures.

113. About field study, a practical repairing case for box girder was used to proceed impact-echo test and to do advanced analysis of transfer function.http://

114. M series pneumatic is mainly used for hot rivet joint of metal structure such as joint work on steel structure of boiler, container, bridges, large girder and truss of automobile, etc.

115. The cause of concrete crack in the construction of box girder of passenger dedicated railway line is introduced, and the relevant control measures are raised.

116. In order to solve the alignment problem of steel girder and deck slab bolt hole, the screw jack is designed.

117. Mechanics behaviors of Sutong bridge were computed by this method, and longitudinal stress, transversal stress of plates of the girder and section stress distribution were discussed consequently.

118. Compares in the first two game of steadiness, this war girder fine light has demonstrated own strength fully in the fierce combat, but his match Yin Jun intrepidly is also famous by the strength.

119. Use optimized computer design box type girder as main support grider.

120. Based on coordinating relations of steel and concrete, the grillage structure finite-element method was adopted to analyze the space mechanical effect of curved girder bridges.

121. The wind erosion of the stubble land of naked oats in bottomland is 60.13% more than girder land and they are diversity markedness.

122. The main studying object is the transverse dolly of the box girder.

123. In this paper, the three dimension analysis of a railway continuous channel girder bridge is reported.

124. The tube pressure state of the arch rib and the new techniques such as lifting and jacking-up longitudinal girder and beam using continuous jack.

125. The simulated results indicate that the grillage model can indeed simulate the vehicle-bridge interaction of girder bridges via a rational mesh and the principle of equivalence.

126. The matrix equation of the sectorial coordinate has been deduced by making use of the graph theory and energy principle after creating the graph model of the box girder section.

127. Based on the practical engineering(http://), discussion is made on the design and evaluation of moulding board brace for one prestressed concrete continuous girder bridge.

128. In this method, interpolation is used to get the axial force at the analysis site, then put the force into the correction formula to get the corrected moment of the deflective girder.

129. This work improves the so-called displacement-based method and addresses the very real need of assessing the safety of lattice girder shotcrete support during tunnel construction.

130. The gait-model bridge girder erection machine mainly applied to the erection of long-span, large-tonnage and double amplitude bridge deck concrete full-span box girders.