(1) A wheel spins on an axle.

(2) The wheel rotates around an axle.

(3) The back axle is broken.

(4) Thus a wheel revolves on its axle.

(5) The rear axle carries the greatest weight.

(6) He hit a rock and snapped the truck's axle.

(7) Replace the front axle complete with a driven unit.

(8) The next hurdle was finding a front axle.

(9) It had a spring suspension axle for which a fully automatic tracking axle system is also available.

(10) A second-hand tractor front axle would have cost a lot more.

(11) Yes, they had similar de Dion rear axle set-ups, but there the similarity ends.

(12) A string led from the axle, via a pulley held by another patient pupil, to a dangling weight.

(13) The wheelbarrow had been stuck, almost to the axle, but when it came free I toppled with it.

(14) The Albion axle production plant in Glasgow is to lose 67 jobs.

(15) The axle had been hurled 575 feet by the blast and had crashed into a parked car.

(16) Agents took the vehicle identification number from the axle and within hours traced the truck to the Ryder rental firm.

(17) Those riverbeds could snap an axle as crisply as the way that Zervos snapped his fingers when he danced.

(18) He also designed new and much improved axle bearings, which largely eliminated the overheating which had caused serious traffic delays.

(19) Third provides direct drive and fourth an overdrive, driving through a new two-piece propshaft to a 3.07:1 rear axle.

(20) Gnoya Street still smelled of oil, of horse droppings, soap and axle grease.

(21) Then he attached a rope to it and scuttered down to tie the other end on to the front axle of the Golf.

(22) Secondly, I have problems with oil pressure building up in the front axle.

(23) Another lorry had too much weight on the front axle.

(24) If we had to cite a bad point, it would be the hard-to-reach drain plug on the rear axle housing.

(25) Springing was provided only on the bolsters and above the axle boxes giving a comfortable ride but a tendency to roll.

(26) This increasing castor thus compensates for any inclination of the car on the rear axle.

(27) Wheelbase is the horizontal distance between front and rear axle centres.

(28) And Chrysler narrowly avoided a major strike in August at its Detroit axle plant, another aging factory targeted for shutdown.

(29) Later, for the 20 and 30, the motor was moved ahead of the front axle.

(30) It is like the differential gear on the back axle of a car.

(1) A wheel spins on an axle.

(2) Thus a wheel revolves on its axle.

(3) The rear axle carries the greatest weight.

(31) It's unfortunate your big end's gone just as we've run out of lanolin, will axle grease do?

(32) Replacing a Range Rover's ball joint which joins rear axle to A frame Military or civvy?

(33) Robby gorged himself on axle grease and I spurned the dreaded beets with impunity.

(34) It allows the vehicle to manoeuvre without tearing itself apart on the back axle.

(34) is a sentence dictionary, on which you can find good sentences for a large number of words.

(35) I argue that rear axle radius location arm must be out of true.

(36) I wonder if you could tell me who could supply parts for the output differential to the second rear axle.

(37) No, but the engine and gearbox and front axle will all fit.

(38) These arms lifted the dray vertically, drawing it forward and dropping the beam axle on to carrying brackets on the tractor chassis.

(39) The mechanic greased the car's axle.

(40) The wheel and axle is a rotating lever.

(41) They weld the pieces of a broken axle.

(42) The axle doesn't work smoothly. It needs oiling.

(43) The axle is out of true.

(44) The invention relates to a bike with an assistor, in particular to a bicycle, tricycle or tetra-cycle with an assistor, comprising a frame, a rear axle, a front axle and a middle shaft.

(45) Now change to top view, copy the light and mirror it to the X axle.

(46) A suit of the automatic checkout equipment used for the axle parts is designed. The equipment can check automatically the diameter, circle degree and circle jumpiness.

(47) To the east wind axle, as a representative of the driving axle and bevel gear industry is integration, have seen rapid development of restructuring the hope for the development of.

(48) Just insert axle into one of the three precision - machined openings and tighten in a bench vise.

(49) The cell lid has a blank label that you can edit by yourself. You can insert it into the fixed axle of box lower casing.

(50) One end of a sliding axle of the balance bridge is fixed on the stander. The sliding axle is movably connected with the balance bridge.

(51) Based on the analysis for the fracture of a type of mini-bus driving axle, a 3D model of the driving axle for FEA is presented with the basic principle of FEA.

(52) Each rear car wheel has a separate axle, and there are two side gears splined to the inner ends of the two wheel axles.

(53) We have also supplied FEY lamilar ring ( used in axle box ) to Zhuzhou Electric Locomotive Works.

(54) Correct positioning of the connection of the axle housing and gear reductor housing is the Key point of driving axle assembly to play the role of its overall functions.

(55) Also at the back of the car, the diffuser has been moved rearwards , its leading edge now level with (rather than ahead of) the rear-wheel axle line.

(56) With a unique 2-piece joint between the axle and the wheel, the same extreme wheel turning angle is divided into two shallower angles without joint binding.

(57) With a differential as example, the optimum design of driving axle is explained.

(58) Two types of steering mechanism for full trailers are axle steering and wheel steering.

(59) On frame-type vehicles, two-wheel alignments are taken from the frame and the rear axle is assumed to be in correct alignment.

(60) The test can proves that it is credibility to take the driving axle housings bench test demand as a check standard and to optimize the driving axle housing structure parameters in design method.

(61) The ends of the blue bars are attached to the chassis. Note how the axle is free to move up and down, but it can't move side-to-side.

(62) Auto industry: steel ring, vehicle body, chasis, axle housing, oil tank, door, etc. C.

(63) Qiaoxiang Machinery Industry Co, . ltd is a professional manufacturer of telescopic boom forklift truck , forklift truck , loader , driving axle , gear box and other machinery products .

(64) It is found that the cause of the fracture is the stress concentration at the hinge axle flange area.

(64) try its best to gather and create good sentences.

(65) The suspension system of claim 3, further including a torque rod linking said lower axle cap to a hanger on said chassis.

(66) Using a spring clamp , fasten the kingpin and axle mount together.

(67) It is located in front of the front axle close to the wheel centre line, and enhances the car's very agile handling by its direct transmission of the steering forces.

(68) The utility model comprises a fork arm assembly and a rotating head; a rotating axle, a chain wheel, a driving chain and two oil cylinders are arranged in the rotating head.

(69) Precise metrical model of steering axle inclination ( SAI ) is built for analyzing the four - wheel aligners ? ? metrical error.

(70) Cutting - axle fracture are primary causes of wagon capsizing.

(71) The bike chain drives a sun gear on the rear axle, which transmits power to planetary gears situated around it.

(72) Then, the sample data and the block data in the new coordinate system are sequenced along axle direction.

(73) It has been provided by practice that one of the problems, which constrains the development of multi axle drive vehicles, is the rational distribution technique of the driving torque.

(74) Finally use the dynamic three axle shear test to research impulsive load function under red clay mechanics and distortion characteristic.

(75) Introducing the calculation of decelerator axle - system each grade axial clearances and its theoretical basis.

(76) The note pressing wheel axle is also provided with a coded disc and an auxiliary coded disc relative pipe.

(77) Heavy - haul railway has a great destructive effect on railway line because of the increased axle load.

(78) Apply to Electric truck scale, axle load scale, electro - mechanic scale, static railroad scale.

(79) In chapter 3, HCQ 3.0 table of driving axle synthesized performance is successfully developed.

(80) The wheel and axle of the Han Dynasty are an important subject of study for the history of Chinese science and technology.

(81) As a result, it can decrease production routine and reduce production costs, which will lay foundations for practical research on parts such as crank axle.

(82) The results show that there is an obvious stress concentrated area in the body of the driving axle.

(83) They know how to code, but they're also familiar with the smell of axle grease.

(84) The internal of the core axle end is provided with a needle bearing, which balances the bearing of assembly wheel hub and enable the operating more stable.

(85) Comparing with traditional method, the result of measurement in this method contains influence of cooperated clearance between the regular polyhedron and the axle stand.

(86) Remain its accuracy by rotating 360 degree around its axle center for Square and cylindroid vials .

(87) Selecting granite becomes the precise coincidence of the aero static main axle.

(88) The dead axle does not rotate; the wheel rotates on it.

(89) In order to adapt to the automatic continuous thermal assembling, to save energy and to reduce costs, one new induction heating apparatus for axle tube thermal assembling is developed.

(90) Our company is a state-owned Co specialized in handling saddle, pedal, brake set , axle, brake cable, Basket, children bike , freewheel and some other products.

(91) The paper analyzes the problems with AZL90 axle counter communication structure, and puts forward an idea for solving these problems with star topology.

(92) The causes to the damage of the taper roller bearing in the axle gear boxes on air conditioned passenger cars type 24 are analyzed. Seven improvement measures are put forward.

(93) Revolving shell details including - way union, four-way union, corrugated pipe, corrugated sleeve and automobile axle housings etc.

(94) The rotating disc extracting tower includes tower body, fixed ring, axle, rotary discs and rotary plate.

(94) Wish you can benefit from our online sentence dictionary and make progress every day!

(95) A test method of torque synchro rotor quadrature axle damping short - loop loss and current was introduced.

(96) The rack - and - pinion steering is sharp, and the torsion beam rear axle gives car a grown - up feel.

(97) The strengthen layer of load - bearing surface of planet wheel axle by laser hardening was studied.

(98) Specialize in connector press pieces of factory devoted to connector, connector become always , golden cup lay axle, shock absorber, rubber press production and processing of one.

(99) Remove sealer from axle tube to housing junction, if necessary.

(100) The suspension system of claim 1, further including an upper torque rod linking said axle to one of said cross frame members.

(101) This is largely because the handle makes the gear axle with obliqur teeth drive gear shaft with obliqur to move, which makes drilling die plate with guide mechanism and drill sleeve to work elamply.

(102) It consists of steering wheel, steering shaft, worm, gear sector, pitman arm drag link, steering knuckle arm, king pin, steering arms, tie rod, front axle and steering knuckle.

(103) We manufacturing key parts for automotive and rear axle casings for various light - duty trucks and MPVs.

(104) In the using of type C3163 turret lathe in our plant, the hand rocking axle gear in the cross-slide was often broken.

(105) The noise power, sound intensity, sound presure, vibration velocity and corresponding frequency spectrum of JHC6400 rear axle surface were measured and analysed.

(106) RUGGEDNESS. Automotive ring gear differential. Axle shafts on roller bearings.

(107) The fracture is brittleness cleavage one because that mechanical property of axle is disqualification and quenching crack presence on the surface by the surface treatment.

(108) With the help of an unconstrained minimization method solved is the axle center actual location of the rotor within its working speed range.

(109) In combination with precision motion control and laser scanning along axle and circular direction, the method can classify and recognize the defects of scotching and flaking on wheel tread.

(110) When the device detects acceleration, it sends a signal to a small electric servomotor that rotates a sleeve on the axle to shift the planetary gears.

(111) An anti-sway bar is a metal rod that spans the entire axle and effectively joins each side of the suspension together.

(112) This paper examines the reliability optimization design for front - axle with non - normal distribution parameters.

(113) Further more, the road base thickness graphs are provided according to different equivalent axle load action frequency with different roadbed modulus and road surface modulus taken into account.

(114) Applying software DEFORM, the process of upsetting - backward extrusion has been analyzed for JX 1030 axle shaft sleeve.

(115) The present conditions of increasing axle load for railway freight cars in Europe are described.

(116) The main failure forms, such as thermal fatigue crack and thermal ablation of die of axle box body by semi-solid squeezing forming of B grade steel were presented based on lots of experiments.

(117) For the enterprise production of a certain type of automobile driving axle shells high strength, since big, reliability wasn't sure, carry out based on reliability and optimal design of research.

(118) Following the example of surplus joint of standard straight cylinder gear and axle, the article has explained that ANSYS Finite Elem...

(119) Three- axle motor vehicle differential gear damage, such as, the rear axle differential damage to any one, can be the bridge and axle shaft removed, continue to operate.

(120) The electric motor resides just forward of the rear axle.

(121) Breaker This breaker by the electrical machinery, the speed reducer, turns limits the shaft coupling brokenly, the breaker fixed plate, the breaker rotor plate, the main axle is composed.

(122) Used the three axle linkage engine bed to carry on the processing, changed the thread processing technique and using the great procedure programming, and has obtained the good effect.

(123) The noise power, sound intensity, sound pressure, vibration acceleration and corresponding time-frequency spectrum of 6480 driver axle surface were measured and analysed.

(124) Install steering damper onto the axle bracket and drag link.

(125) This is an ANSYS optimum design for driving axle housing of a off - road vehicle .

(126) It is much more advantageous to adopt a taper straight-side triangular spline than an involute one, for example,[/axle.html] in linking up big gear of wheel bub reductor with axle shaft in heavy duty trucks.

(127) A main clutch is connected through the driving axle of the walking wheel, and the operating rod of the main clutch is connected to the planting device.

(128) The utility model relates to a double-surface button without sewing, comprising an outer surface button, an inner surface button and a middle axle in connection. The side elevation forms an H shape.

(129) The alu driveshaft adapters for the front solid axle are a direct replacement for the stock composite versions but with increased strength and lifespan.

(130) There are two Basic types of axle : dead axles and live axle. The dead axle does not rotate; the wheel rotates on it.

(131) In this text, the authors analyze the relations of the tensile stress under the base with axle weight and base parameters, and consider the characteristics of asphalt base and semi?

(132) Remove nuts attaching splash shield and caliper bracket to axle tube flange.

(133) Through the analysis of these bogies structure, the inner axle - box bogie was deeper understanded.

(134) A rotation axle whose two ends are provided with bearings horizontally passes through the middle portion of the vertical surface of the shell body.

(135) Whether the axle pin can be smoothly bolted into the hinge support is crucial for the whole project. To achieve this goal, a prefabricated taper pin was used to induce the axle pin.

(136) In this paper, the dynamics mode of vehicle axle is established, the state vector of it is calculated and the dynamic performance is analysed.

(137) Through the drive axle housing, the tractate force, braking force and lateral force act on the wheel transfer to the suspension system, frame or carriage.

(138) Frank abandoned his axle as the heat in it died.

(139) Elastic wrench moment axle is an elastic buffer device of cutting transmission system installed on the both ends in the hollow axle of electrical_machinery.

(140) His favorite dysphemism was to ask for axle grease when he wanted butter.

(141) The results anastomose those tested and can provide valuable reference for the designing of rear - axle housing.

(142) The idea of matching compound bulging force parameters and the matching principle for hydro bulging automobile axle housings were proposed.

(143) The solid axle suspension uses a solid steel dead axle (does not turn with wheels) with a leaf spring at each side.

(144) It is advanced that main order work step and add order work step can be extended along time axle. According to restricted condition of every work step exchanging, it can be programmed.

(145) Remove the lower suspension arm nut and bolt from the axle bracket.

(146) Thus the wheel and axle came into being, and with then the first carts.

(147) In case of the noise statistic being unknown or variable, adaptive Kalman filter is used to get drift speed of each axle at each test position, and then drift parameter is calculated.

(148) On the horizontal projection plane, an included angle is formed between the thrusting bars and the longitudinal center line of the axle.

(149) The preselection machine of gaskets is used for selecting the adjusted gaskets in assembling the initiative taper gear axis of the automobiles driving axle.

(150) Axle load conversion methods based on fatigue equivalent were studied.

(151) By analysing the mathematical model and the design process of driving axle, the search algorithm and the parameter update algorithm are given in this dissertation.

(152) The equivalent coefficient method based on equivalent axle and equivalent coefficient was put forward to define the calculation model and method for charge standard.

(153) The article introduces a new type of axle lockpin hole machining tool.

(154) The artide introduces the toe-in, propulsion angle, steering axle inclination and caster of four-wheel aligner and theirs influence to vehicle stability.

(154) try its best to gather and build good sentences.

(155) Company specialize in automobile fittings, sandy beach car rear axle always succeeding and auxiliary products.

(156) Objective : To investigate the effect of herbal iodine on the hypophysis - sex gland axle in rats.

(157) Shaft coupling : in the Block reducer and gear is used between security company axle vehicles.

(158) The early damage of asphalt pavement under the heavy axle load becomes more and more serious.

(159) Disconnect the axle or end of the propeller shaft or the universal joint, according to type.

(160) This system assigns the independent driver between the car axle as well as the trailing wheel, enhances the force of traction and the stability.

(161) Because of the complexities in geometric forms of the axle and the supporting Patterns, most of the calculations of the critical speed of turning axle are difficult.

(162) A method for manufacturing a banjo type drive axle housing for a motor vehicle is disclosed.

(163) A new method for processing the hexagonal hole in the axle by hot backward extrusion on the friction press was proposed, which threw away the traditional milling or slotting method.

(164) Models of drive axle housing and A-frame of the SGA3550 are established and the structural strength and stiffness under limit conditions are calculated.

(165) Designs and computations were made for major components such as twisting moment of the valve axle, neck and air jar diameter.

(166) Based on the analysis of the helical spring dependent suspension, it is presented that the theoretical expression among the main parameters of the rear axle and the heeling angle stiffness.

(167) Through the drive axle housing , the tractive force , braking force and lateral force act on the wheel transfer to the suspension system , frame or carriage.

(168) The heating assembly is generally applied for the closed impeller wheel and axle in the large-scale compressor group.

(169) Under the axle - tree hung, like drapery, a huge chain, worthy of some Goliath of a convict.

(170) It is one of trailing arm suspension that can only be applied in the rear axle and cannot be applied in the front steering axle, so there are only two wheel alignment parameters:toe-in and camber.

(171) This paper presents a geometric model description methods of the cone gear for final driver of automobile driving axle system based on STEP, and establishes application protocol(ZCAP).

(172) The balancing axle reduce the shock and the noise, lengthen the life of the engine, increase the comfort ability, softy and joy when customers are riding the vehicles.

(173) When some braking moment on the axle, delay release air brake braking system response greatly slower than electronic operation, will appear braking resistance.

(174) Weld a contiguous bead around the entire circumference of the axle mount.

(175) The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

(176) This platform is designed to allow the powertrain to be set farther back behind the front axle, which creates a more even weight distribution and less understeer .

(177) In the paper, the theoretic express of the rear axle parameters and the rolling angular stiffness are educed by analyzing stiff-ness of spiral spring dependent suspensions.

(178) Wheel rotation allows easy alignment on axle with brake keys.

(179) It is applied on motors, motorcars, transmission shaft, gear axle and so on.

(180) There are two Basic types of axle: dead axles and live axle.

(181) In an electric car possibly one or more batteries will be situated near each axle.

(182) The equipment adopts heavy reductor , outer steel body axle pedestal and the structure of long staff-diameter ratio.

(183) Two adnate shatters and two adnate leafits are radial range, and they locate in the end near axle.

(184) The axle center is embedded into a guide apparatus, interlocked with the second rack and moves along the second direction.

(185) The rear axle is stationary, and is bolted rigidly to the main frame.