1. It's possible to weld stainless steel to ordinary steel.

2. I have a set of stainless knives and forks.

3. The standard spec includes stainless steel holding tanks.

4. They've got a battery of stainless cooking utensils in their kitchen.

5. In the kitchen an impressive battery of stainless steel utensils hangs on the wall.

6. The stainless steel pipework has been constructed, tested and inspected to very high standards.

7. Keep silver or chrome-plated cutlery away from stainless steel.

8. Good stainless steel pressure cookers cost around ￡40.

9. Inset single drainer stainless steel sink unit with mixer taps over.

10. One wall of the cell is a flexible stainless steel diaphragm connected through a strain gauge to a recorder.

11. With its stainless steel body and gull-winged doors, it is one of the most instantly recognisable cars ever built.

12. The spire is made of stainless steel plate, rolled into a seamless cone.

13. The box at Marske-in-Swaledale, which turns its blank stainless steel back to the main road, is a particularly sore thumb.

14. The scissors have stainless steel blades and retail at ￡1.99 in department stores and toy shops.

15. Stainless steel cutlery Can discolour and pit if left coated with food[], so use the pre-wash cycle.

16. Clarets are aged in stainless steel vats or oak casks, and are bottled only when they are considered ready for sale.

17. Single drainer stainless steel sink unit with drawer and cupboard under. Wall cupboards.

18. There will be a stainless steel kitchen capable of providing 100 meals a day on six-burner grills.

19. A stainless steel clip holds the lid open when access is needed for compost or liquid removal.

20. Once the acidity is right, huge, mechanical, stainless steel forks are switched on to cut the curd into large chunks.

21. On the exhaust side, stainless steel piping was run to a large lorry exhaust on one mudguard.

22. Two large stainless steel frames were suspended from the ceiling.

23. Stainless steel should be used for critical risk areas or for handling very hot liquids.

24. Before the recent political scandal, her reputation had been stainless.

25. On his left was the galley, a tiny kitchen gleaming with stainless steel.

26. The M asteroids are about 99 percent metal with the composition of a natural stainless steel.

27. The Lanes' vat has had to be fitted with a new stainless steel liner.

28. One day I was going to go to Petland and get one of those big chains, the stainless steel ones.

29. A fan is used to retrieve the flue gas heat, utilising a stainless steel condensing coil.

30. Clean the outside of the cabinet with warm soapy water and a soft cloth, or use a food-safe stainless steel cleaner.

1. It's possible to weld stainless steel to ordinary steel.

2. I have a set of stainless knives and forks.

3. The standard spec includes stainless steel holding tanks.

4. Before the recent political scandal, her reputation had been stainless.

31. They also say the 25-ton stainless steel casks used at some plants to stored cooled material above ground are too expensive.

32. Food processors are using the systems for cleaning stainless steel food preparation stations.

33. Ashley got more excited over his new bit of stainless steel than Les did with his old brass.

34. Practitioners use fine needles - normally stainless steel - to stimulate specific anatomical points of the body.

35. The little clinic was spotless, painted white, with sparkling chrome fittings,[http:///stainless.html] stainless steel instruments and pure white fluffy towels.

36. Mobile stainless steel racks are treated as stainless steel worktops.

37. Single drainer stainless steel sink unit with mixer taps and window to side aspect.

38. Before the days of stainless steel, large houses used a knife-cleaning machine.

39. Twentythree stainless steel dishes, Denby casseroles and Pyrex serving sets have gone to that great built-in-obsolescence pile in the sky.

40. As soon as I get up, I light the fire and put on a stainless steel pot for hot water.

41. For Edward, the stainless steel containers, and the job, took on a deeper significance.

42. The Grillmobil has two separate heating elements, both with 12-step variable temperature switches and two stainless steel grids that are removable.

43. Specialty metals such as stainless steel, silicon electric steel, alloys and tungsten still are produced in the area.

44. Prestige's stainless steel pressure cooker with a Thermocore base allows you to produce delicious, complete meals in minutes.

45. Single drainer stainless steel sink unit with drawer and cupboard under.

46. They provide chamber capacities from 50-125 litres with large stainless steel chambers in relation to their footprint.

47. Before making the welfare address, Dole toured a local plant that manufactures stainless steel tanks and employs several former welfare beneficiaries.

48. Use a flexible plastic smoother for fondant icing, and a small stainless steel scraper for royal icing.

49. Occasionally, some one would use butcher block, solid wood, copper, stainless steel, marble or some other exotic surface.

50. This stony material is certainly much easier to crush and handle than a massive chunk of stainless steel.

51. The male and female lavatories on each floor are lavishly treated, with stainless steel basins, marble floors and dramatic lighting.

52. They used either aluminium or steel foil, contained in a stainless steel cassette, as a recording medium.

53. The unit is made in stainless steel and has cast-iron pan supports with removable drip trays underneath.

54. Oven-to-table Maitred'hotel is a range of oven-to-tableware in solid stainless steel with gold-plated handles.

55. Stainless steel made good medium of exchange on a planet where all metal had to be imported.

56. A stout, stainless steel pillar between deckhead and cabin sole in the galley area forms a useful handhold.

57. Stainless steel cleaners: Many products so described are polishes or include substances which may leave undesirable residues on food contact surfaces.

58. Made of bronze, brass and stainless steel, it is the artist's largest, most monumental sculpture to date.

59. Inset single drainer stainless steel sink unit with mixer taps over. Breakfast bar.

60. The tool case is made of stainless steel.

61. Metalworks, installations, repair and stainless steel products.

62. The stainless steel reinforced shoe provides continuous smooth action.

63. He recalled the stainless purity of his boyish life.

64. Brass body; stainless steel needle; Buna-N seal.

65. a large stainless steel pan.

66. The stainless steel cup has a polished mirror finish.

67. Stainless products are always popular because they're rustproof.

68. Materials include polished stainless steel[http:///stainless.html], fibreglass and leather.

69. Stainless steel case and back with PVD gold plating.

70. The workers are casting a stainless steel bust.

71. Cast bronze body, plastic check assemblies, silicone discs and stainless steel springs.

72. With CD40 lubricating oil as work medium, under the engine cooling system work conditions, 21 geometrical schemes of stainless steel offset strip fins were studied.

73. This production line comprises the stainless steel washing machine, manual frame mounting station, automatic flat press, automatic tilting table .

74. Initially we were using them for melting and making Stainless steels by using imported stainless steel scrap but market condition from mid-eighties encouraged entrepreneurs to make mild steel.

75. The stainless steels exposed to tidal zone were attacked by pitting and crevice corrosion.

76. All internals have been selected for their anti-corrosion properties; include chromium plated mild steel, brass and stainless steel parts.

77. Micro touch button, compacted position indicator landing door on all floors, cover plates hairline stainless steel.

78. Class 300 - 600: Fully - encased spiral wound graphite - filled stainless steel gasket.

79. This paper describes the effect of shot-peening on fatigue strength of compressive coll springs of stainless steel.

80. Each one is made of a stainless steel, aluminum and sheet - moulding compound.

81. Applying Galvanised , Electro - Galvanised, Stainless Steel , Aluminium , Black Steel on Kitchen Exhaust System and Mechanical Ventilation.

82. Chaoan Caitang Huifeng Stainless steel Products Factory specializes in various stainless steel kitchenware, dinnerware.

83. Unit of measure for stainless steel scrap and iron ore.

84. A sheet of . 002 stainless steel was cut to size and cleaned thoroughly using water and a scouring pad.

85. Material quality: The Swiss quartz cassette mechanism, the watch case is the stainless steel, the watch band is the stainless steel, the sapphire crystal glass mirror surface.

86. The Condenser is constructed of AISI316L stainless steel with a condensing surface comprised of independent stainless steel coils. It is rated for full vacuum.

87. Upper edge of main case are wrapped by stainless steel, not only make the product good looking and better anti-corrosion, but also protect the surface out of scratch. Meanwhile, it is easier to clean.

88. But during production, it is very difficult to get improvement in stainless steel surface field; surface quality of stainless steel is a key point restricting stainless steel whole quality system.

89. Color: silver, black and tan ecru, golden color and stainless steel etc.

90. The stainless steel polishing kneading board, the high quality water joint, the flexible silica gel seal packing collar, processes processing specially the tempered glass.

91. A new coloring method, alternating voltage passivation, was originated to obtain color films on stainless steel in Cr-free sulfuric acid solution.

92. This paper introduces the TIG _ welding technology of repairing stainless steel casement.

93. Our products range from industrial platforms staircases fences barriers and trench covers of various durable metals such as aluminum steel and stainless steel.

94. The six-roller mill is suitable for rolling steel strip products such as straight carbon steel, quality carbon steel, low alloyed steel, stainless steel,[http:///stainless.html] and the like.

95. SS 50is suitable for machining all the ferrous metals, steels and difficult to machine materials, such as stainless steel, high nickel steel and heat resisting steel.

96. All finished metal surfaces, such as chrome, aluminum, brass, stainless, etc.

97. Laser direct forming experiments were carried out with 316L stainless steel and nickel-base alloy. The influences of processing parameters were investigated systematically.

98. Are specializing in the production of small household electrical appliance enterprises Kettle , are the most professional manufacturers of stainless steel Kettle.

99. An open kitchen has a stainless - steel hood set over a square island.

100. Made of quality carbon steel zinc surface - plating or stainless steel.

101. Beyond this, his youth must be innocent of crime and chaste, his conduct irreproachable and his hands stainless.

102. This Rib boat is with stainless or fiber glass roller bar.

103. The toy inspired study co-author Chiara Daraio to invent the acoustic lens, which uses 0.95-centimeter stainless steel spheres aligned in parallel chains.

104. SPARK special enzyme ingredients loosen dried - on food soils on silver and stainless steel flatware.

105. Cixin watchcase material USES 316L stainless steel, leather strap, of primitive simplicity of classical elegance fully round watchcase of fashionable element, uncommon grade immediately show.

106. It adopts large helix angle and special arc configuration that is suitable for processing some hard materials such as stainless steel and titanium etc.

107. Each O- Ring has a double envelope, with the inner ring in stainless steel, the external in copper alloy and an Inconel spring.

108. Stainless steel cylinder mould is mainly used for the paper molding of circular screen paper machine.

109. Valve of the main materials are cast iron, ductile iron, carbon steel, alloy steel, stainless steel, chrome molybdenum steel, and other materials.

110. Kinds of storage tank installation. According to the requirement of customers, prefabricate the stainless steel.

111. Welding of Carbon - Steel, Stainless - Steel and Nonferrous - Metal tube.

112. MATERIAL - Indicate material such as plain carbon steel, stainless steel or other alloy.

113. The process of Ni-Mo plating of stainless steel is introduced in detail. The effects of pretreatment, Zincate Zn pre-plating and process factors on-the technology are also discussed.

114. When using centrifugal cast iron pipe, we should pay attention to its installation and technical requirements, such as that of stainless steel clasp and local su...

115. Model 409 - the cheapest model (BAR), commonly used as automobile exhaust, is a ferritic stainless steel (chrome steel).

116. The material of the splintered forms that define this edge and opening of the University are layers of glass and timber plywood louvers, suspended on fine stainless steel rods.

117. A grey metal that is normally used as an alloying agent for iron and stainless steel. It is also used as a strengthener of titanium-based alloys.

118. The ski jump is clad with a mesh of stainless steel and rises 58 meters in the air.

119. Machined brass construction, chrome nickel plated body, EPR rubber check disc assemblies and Buna 'N' seals, stainless steel springs and pressure plates are standard.

120. Type VII: Made of high - quality steel or stainless steel by mechanical cable - clamped device.

121. Separation media guide magnets used stainless steel wool and stainless steel net Magnetic two.

122. The influence of negative pulse voltage applied directly to stainless steel samples on plasma characteristics has been found to be negligible, except sample sputtering.

123. Tumbling, dull polishing, mirror polishing, electrolytic polishing, and passivation treatment for the stainless steel castings.

124. The material quality is ASTM A 743 M ( ZG 00 Cr 13 Ni 4 Mo ) the austenite stainless steel.

124. try its best to collect and create good sentences.

125. Spraying a layer of carbon coating on the coating surface of martensitic stainless steel could be benefit to the tin soldering's reliability of coating.

126. This done at either the stainless steel mill or at the stainless steel processor.

127. The blue sandstone face contrast the stainless steel filigree and case.

128. The cotter pin is stainless, the other parts are hot-dip galvanized steel.

129. Stainless steel is adopted as material for nozzles, inner or outer or side cooling rings, each of which is equipped with pressure indicator and flowrate adjusting valve.

130. We will need to source a stainless steel factory that has enamel capabilities in China.

131. Test solution— Place each Tablet in a specially made quadrangular basket of stainless steel wire gauze, soldered in one of its upper, narrow sides to the end of a steel rod (see Figure 1).

132. The stem and packing gland are also stainless steel for corrosion protection.

133. The chemical composition of stainless steel thin plats was determinated rapidly by direct reading spectrometer after optimizing analytic parameters. The accuracy and precision of the results are high.

134. The work chamber adopt the mirror-surface stainless steel, four-square semi-circle arc, which is easy for cleaning. The distance between shelves is adjustable.

135. We also supply pickling line, Degreasing line, Annealing furnace for stainless steel.

136. The unit is consisted of a stainless steel heat coil made of stainless steel sheath bonded with stainless steel fins encase in an IP44/IP56 stainless steel enclosure.

137. One or more roughing tools and a finishing tool are usually required for each job. Tools made of cold-rolled steel or stainless steel provide the best wear ratios.

138. The working table is made of stainless steel by totally enclosed type that will be easily operated and not be damaged.

139. The new design machine use the new clamp which is made of stainless steel and special steel, it is legerity and convenient.

140. It is also a good helper for cleaning in the areas of modern city environment protection, ads company, bus company, telecom system, mines factories, stainless steel company etc.

141. An electromagnetic shielding material was prepared by adding stainless steel fiber into LDPE.

142. The principle for the oil-quenching and tempering technology of two high chromium martensitic stainless steels is introduced.

143. Black doorcase does not see more, the entrance door with outer stainless steel is added inserted every bits of bit fashionable breath.

144. The results show that the efficiency of stainless steel flakes and glass flakes to improve the cathodic disbondment was better than that of mica powder.

145. We installed a stainless steel towel rail on the wall.

146. Stainless steel rubber rings, earrings, pendants, bracelets and die, wire rings, earrings, pendants, bracelets, please call letters negotiations.

147. In welding test of TCS stainless steel, it was found that impact absorbing energy of heat-affected zone(HAZ)near bond line in welded joint was low. The reason is coarse grain in HAZ.

148. Material: high quality low carbon steel wire, stainless steel wire, aluminum alloy wire, PVC wire.

149. To be seasoned with the specification of process piping with defer structure, It is frequently to use stainless steel bending elbow for the equipment of petrochemical industry.

150. Stainless steel composite strips were made by using inversion casting method and then rolled. The differences of the microstructures and shear strength were studied.

151. Common varieties are brass, copper, aluminum, low carbon steel, stainless steel, monel alloy, silver and nickel.

152. Stainless steel is adopted as material for nozzles, inner or outer or side cooling rings, each of which is equipped which pressure indicator and flow rate adjusting valve.

153. Processing material including cold rolled plate, stainless steel, aluminum sheet and galvanized sheet and so on.

154. Finish: Electric galvanizing, hot - dip zinc plating,[http:///stainless.html] stainless steel or PVC coated.

155. The anodization behaviour of ECR alloy and 18 8 stainless steel in the saturated salt solution is analysed and both properties of local and total corrosion resistance are also compared.

156. Design: Electric juicer with cast aluminum base, stainless steel container, polyacetal copolymer strainer and 3 reamer sizes.

157. The small pneumatic spot welder is specially designed for welding with the stainless steel, nickel, iron, tinned wire and sheet copper.

158. Design of stainless steel air way and high-speed and strong hot air convection, quickly removing internal stress of upper and making it fit.

159. It is suitable for semi-finishing of Fe, Ni high temperature alloy, cold hard cast irons, stainless steel with good heat-resistance and nonferrous metal. It is a wide application.

160. On the anklet there is stainless steel flying rings for fixation , it is connected by the 35CM stainless thin chain in the middle.

161. The steam box is manufactured with stainless steel or aluminum alloy materials, and the diameter size of the steam box is matched with the caliber of the kettle.

162. Gas Fired Spray Washer to Clean an Automotive Part prior to an assembly Operation. Washer was constructed of Stainless Steel with Indexing Chain Conveyor and Ambient Blow-Off.

163. Stainless steel is conductive, and acrylic fiber has the defects of poor hygroscopicity and serious static electrical phenomenon.

164. Our company is stainless steel band manufacturer with relatively larger scale in Zhejiang Province.

165. The technics can been applied to surface treatment of chemical etching, chemical polishing and chromium electroplating for different kinds of stainless steel.

166. All positions to contact material are made of stainless steel and have fair resistance to corrosion.

167. The rotor connected the various ports in the stainless - steel valve block.

168. Type 305 and 316 stainless cannot be case hardened and don't have the ability to penetrate steel.

169. The iPhone 4 is made up of three basic parts: two pieces of smooth, strengthened glass, and a stainless steel band which wraps around the sides, top, and bottom of the phone.

170. Made of PP, PVC, CPVC, PVDF, stainless steel, titanium, they are corrosion resisting and have reasonable structure, both increase yield and decrease workers' labour intensity.

171. ADVANTAGE plate heat exchangers consist of a number of stainless steel transfer plates that are held in place between a fixed plate and a movable pressure plate to form a complete unit.

172. The stainless drum may be used to make larger batches.

173. It has stainless steel plate, upper beam, tension rod and meter bar.

174. Wooden Kitchenware, Salad Bow, Trolley, Stainless Steel Cutlery , Classic Furniture and Cutlery.

175. He makes decorative vessels in copper, stainless steel and silver.

176. Hollow metal O-ring is a kind of special sealing member rounded with thin-wall steel pipe, stainless steel pipe, monel pipe or inconel pipe, through welding and polishing of its joint.

177. Household Glassware, Vacuum Flask , Plastic Household Wares, Stainless Steel Kitchen Ware, Ceramics.

178. Stainless laminated strips has usually been selected as a load - bearing structure in main rotor hub and tail rotor hub of a helicopter.

179. QUEEN cookware is made of the finest 18:8 stainless steel and is both durable and corrosion - resistant.

180. Feasible study is discussed in the paper on application of argon arc welding technology in welding process of stainless steel wire screen mesh.

181. Brass, copper, stainless steel, bismuth, and lead are all suitable.

182. The iPhone 4 is a stunning reworking of the Apple device, with a stainless steel band now enclosing a thinner, less curved design and framing a far more detailed screen.

183. The stainless steel mesh belt is one kind of friction drive by the continuous mode transportation material machinery.

184. Material is stainless steel and high intensity aviation grade aluminum alloy through anodization, firm and durable,[] long service life.

185. Precision casting products include carbon steel and stainless steel precision castings.

186. Electrical heating elements shall be screw - in, direct - immersion, stainless steel sheathed, resistance - type .

187. It is a stainless steel tube about 2 cm in diameter.

188. It is suitable for finishing and semi-finishing of stainless steel, alloy steel, Fe alloy.

189. The effects of macroscopic fracture surface patterns and microstructure of slag of stainless steel electrode on the slag detachability have been analyzed.

190. We Beryllium copper, bronze or stainless steel as the material for most applications.

191. The sauerkraut was fermented by purified lactic bacteria in large special stainless steel fermentation tank.

192. There are two main products in categories: A: Stainless steel Stenciling Unit accessory equipment.

193. Stainless steel case with interchangeable croc - stamped leather straps with buckle closures.

194. Austenitic type stainless steel heat treatment of acid - resistant.

195. Ingot, Aluminium and Foils, Scrap, Stainless Steels,() Minerals Minerals and Refractories.

196. Celebrity chefs slice, steam sear in aspirational culinary shrines of stainless steel and high gloss.

197. Foreskin material of aluminum, copper, low carbon steel, stainless steel, Monel alloy.

198. People often buy stainless steel silverware because it tarnish easily.

199. Investing in sexy new stainless steel appliances may be a wise idea when it comes to cooking up a quick flip – be sure to add a coveted glass-front wine cooler.

200. The water filter is made of cast iron, cast steel, brass and stainless steel with small figure. It is indurate and easy to install.

201. The 9.3-inch-long aerodynamic heirloom toy, with its carnelian-core wheels, precision bearings, and stainless steel axles, is built to be passed down from generation to car-loving generation.

202. Hydrogen embrittlement of 2205 duplex stainless steel has been evaluated using electrochemical permeation measurement, hydrogen microprint technique and slow strain rate tensile test in this study.

203. The factory technique strength is strong, equipment is well-found, can accept each kind of high quality carbon steel, stainless fastener.

204. Pots and pans, mixing bowls, flatware, knives, and many kitchen sinks are made of stainless steel.

205. It has stainless steel plate, beam, tension rod and meter bar.

206. Main products include cast iron shots. cast steel shots, steel wire cut shots and stainless steel shots etc.

207. The authors have developed a new type of structurized stainless steel woolcemented stainless steel wool.

208. Levelers trimmersand temper mills reshape processed stainless steel to meet customers'specifications.

209. Our products adopt OMICRON plug connection patent and use stainless steel main water tubes as well as stainless steel connection screws, solving the water leakage problem of the radiators.

210. Dedicated cable wire, enameled wire services industry and the stainless steel industry.

211. This seclusive iteration of the Nokia 8800 were manufactured in strictly limited numbers and featured laser-etched "Aston Martin" logo on the stainless steel casing.

212. Structural Steelwork, ceiling, Louvre, Catwalk and Stainless Steel Glass Balustrade for Auditory Stage at Lingnan Collage New Campus Development at Tuen Mun.

213. The process investigation on hybrid YAG - MAG laser arc welding of austenite stainless steel is systematically developed.

214. The first part is to demonstrate how to remove the stainless wire from the main frame.

215. Sales: Stainless steel plate of various materials, tubes, carbon steel, copper and aluminum metal materials.

216. Mesh sizes 50 - 200 are wire cloth screen with perforated stainless steel reinforcement.

217. Composite stainless steel tube stranding , HDPE inner sheath, medium carbon steel wire armour, Ditumen coating , polypropylene yarn wrapping covering.

218. The mechanical and sealing behavior of the strengthened gasket were studied and compared with the stainless steel graphit spiral-wound gasket and the stainless steel packing asbestos gasket.

219. Used for seamless tubes of stainless, alloy steel and high - temperature alloy .

220. The authors used gelfoam and stainless steel coils to achiee arterial occlusion.

221. Our company mainly deals with following products: stone mosaic, stainless steel mosaic.

222. ZLHB series stainless steel explosion - proof chemical centrifugal pump is applicable to transport inflammable chemical liquids.

223. On a grounded steel table, place the setup in preparation for welding. Clean all visible area of each sub-assembly using a stainless steel brush.

224. Silk squash Materials: stainless steel wire, wire, copper wire, Wire, wire, nickel wire Uses: cartons binding, flat braided wire .

225. Battery Scrap, Lead Battery Plates Lead Ingots, Aluminium Ingots, Stainless Steel Scrap, Radiators Radiators.

226. Chemical property testing: salt spray test of materials, corrosion test of stainless steel.

227. Stainless steel itself was altered to create vanadium, Vitallium, and now titanium alloys.

228. The main equipment such as stainless steel converter, fire tube boiler, main blower and concentrated acid pumps were made at home.

229. This kind of defect can be eliminated by amending parameters of explosive welding and increased the rate of final products of big and thick stainless steel clad plate.

230. The stainless steel rails shown here cost about $3 per foot, and add-on shelves and bins range from $6 to $20 plus shipping (www.ikea.com).

231. In addition, five bar-shaped stainless steel bands which are arranged in parallel can be used for compensating the temperature difference of the baffle plate on the width direction.

232. Wellborn Enterprise (International) Ltd. is a foreign-owned who is specialized in design, manufacturing and Sales for high-end stainless steel kitchenware and household products.

233. Stainless steel gutters, though they are the most expensive, are the strongest, remain rust-free, and maintain a high sheen for years.

234. This article systematically describes the process of stainless steel pipe stock production by ESR. The result s of ESR process are compared with EF-AOD process in cost and effectiveness.

235. Military fuel facility, TT5000 monitors approximated 4500 feet of 12" stainless steel hydrant piping used by Kansas Air National Guard for KC-135 Aerial Refueling Squadron."

236. This production line comprises the stainless steel washing machine, spacer attaching section, automatic assembly, automatic flat press, automatic tilting table.

237. Traditional vinification in stainless steel vats under controlled temperature. Ageing in oak barrels during 12 months.

238. The shell of the machine uses special rubber slab lining or acid-resistant stainless lining board which realizes auto scar removal and de-tumor instead of traditional drawknife equipment.

239. The pump body, Vane wheel water distributor are made of stainless steel.

240. Each factory preset will help users get started with yellow gold, white gold, silver, titanium, platinum and stainless steel. Neither nor models have this option.

241. Objective To introduce the method to insert stainless steel struts to correct pediatric pectus excavatum.

242. Presenting on a stainless steel band and powered by a quartz movement, the watch is water resistant to a depth of 165 feet.

243. All stainless steel body, iron griddle, high efficient heating and temperature control function.

244. Gas gun adopts stainless steel full closed structure, fit for long-term application under worse weather conditions, and convenient for installation and maintenance.

244. is a sentence dictionary, on which you can find good sentences for a large number of words.

245. Introduced die structure design for the stainless steel CD - spring, presented measure prevent spring back.

246. Exhibits: Stainless steel welded pipes and tubes; stainless steel butt-welding fittings; stainless steel.

247. This Electro - Thermostatic Water Cabinet is with stainless steel inner and adjuster.

248. Aluminum alloy wire clamp, kirksite casting hammerhead, stainless steel norm part.

249. With inside stainless steel heating base, innoxious , healthy, convenient to clean.

250. The property parameters of the stainless open type blind rivet.

251. The recuperator tube of ammonia condenser on a factory was made of 316L stainless steel and pitted after used for only one year.

252. We lead the market trend of production of major products Adiantum , stainless steel, tube type of household items, gift sets, lighting accessories, display stands, etc...

253. Corrosion resistant 304 stainless steel body for long life field dependability.

254. Structure:High Temperature High Pressure Hose for the winding wire matrix, skin coated nano-refractory coating layer, stainless steel wire woven layer and layer fire-retardant composition.

255. End product staircase, staircase column, stainless steel guard rail, staircase fitting, stair rails, front door handle and hardware fitting.

256. The main products include industrial fabrics, and filter cloth monofilament, non - woven, glass fiber cloth , vinegar - net, stainless steel net, bag filter, dust bags, and so on.

257. The entire stainless steel structure, acidproof and bears the alkali, artistic and durable.

258. Whole material of this practical new type uses corrosion preventive stainless steel.

259. The dynamic resistance profiles of low carbon steel, zinc coated steel, stainless steel, aluminum alloy and nickel-base alloy have been studied.

260. Primary chalk filters and gypsum repulper are made of AISI 304 stainless steel.

261. Filtration experiments were made on austempered malleable cast iron and stainless steel ( ZGlCrl 8 Ni 9 Ti ).

262. It introduces composite structure , production process, external coating and connecting fitting of liner stainless steelsteel pipe.

263. It is mainly studied in this paper that extracting high-purity chromium oxide from a kind of scrap containing chromium named stainless steel residue.

264. Suitcble for low-carbon steel, alloy steel and stainless steel welding.

265. Ganmo, photosensitive plastic, stainless steel filters, metal sound - absorbing panels manufacturing, and processing.

266. The sales area is defined by stainless steel panels which are perforated in order to reduce the weight of the heavy steel as well as to create a pixilated light pattern.

267. Including Teak Garden Furniture, Stainless Steel Furniture, Aluminum Metal Furniture, Wicker Furniture, Beach Umbrella , Porch Swings and the different kinds of accessories.

268. The perforated plate mesh is made of zinc plates, stainless steel, sheet copper, nickel, aluminum and so on.

269. It is used for pressure and vacuum of ammoniac liquid and gas as well as of zhe madia which can't corrode carbon steel, stainless steel and solders like tin and lead.

270. Electron gun accessories of color kinescope are made of stainless steel which has high hardness and intensity.

271. Filtrate separation tank, pumps and control board are shipped preassembled on a stainless steel structure.

272. In order to discuss the possibility of stainless steel as bone of concrete instead of plain carbon steel, the corrosion behavior of the plain carbon steel...

273. Now the market leading surface treatment, divided into Dutai gold, fake gold, chromium-plated stainless steel, paint and other methods.

274. What's the difference in Stainless steer classification between ISO and GB?

275. Stainless steel chamber and air tunnel, to make sure there is no contamination when clean inside. Long use life.

276. Main original material of products: stainless steel, cupronickel , brass, titanium, manganese, Plastics etc.

277. The invention provides an alternating voltage passivation processing method of a duplex stainless steel.

278. Drilling deep holes in stainless steels, materials of difficult machinability such as titanium and inconel.

278. try its best to gather and make good sentences.

279. Hot forming of stainless steel elliptical head is specifical process.

280. Thereby, an antifouling stainless steel member improved in flaw resistance and also keeping the antifouling property against water stain or the like over a long period of time is provided.