1. Water afar quenches not fire.

2. Wine in the bottle does not quench thirst. 

3. The wine in the bolttle does not quench thirst. 

4. Pouring oil on the fire is no way to quench it. 

5. He quenched the fire with water.

6. Hot steel is quenched to harden it.

7. The firemen were unable to quench the fire.

8. He has to quench his desire for wealth.

9. Do not quench your inspiration and your imagination. Do not become the slave of your model.

10. Ice water is the only thing that really quenches my thirst .

11. Instead of tea or coffee, drink water to quench your thirst.

12. When it's hot, it's best to quench your thirst with water.

13. The government succeeded in quenching the riot.

14. The flames were quenched by heavy rain.

15. The large fire quenched at last.

16. Her thirst for knowledge will never be quenched.

17. The blaze was quenched by the brave firemen.Sentence dictionary

18. Nothing could quench her longing to return home again.

19. I quenched my thirst with a glass of cold beer.

20. We stopped at a small bar to quench our thirst.

21. He quenched his thirst with a long drink of cold water.

22. Adjacent to this was a quenching tank for use in conjunction with the gas ring.

23. The quenching was accompanied by the formation of the corresponding exciplex.

24. This review focuses in quenching and quenching correction in liquid scintillation counting.

25. In comparison with the normal vacuum quenching furnace cooling with gases, there are great developments in the pressure of the cool gas, distribution way of the gas flow and other aspects.

26. Needless to say, it shows that oil is a bargain, though perhaps less thirst quenching.

27. This led to an early invention of annealing, whereby the metal might be softened by sudden heating and quenching.

28. It is obvious that strength increases with the decrease in interrupted quenching temperature.

29. The most commonly used heat treatments on metals are softening annealing, quenching, normalizing, surface hardening treatment, precipitation hardening.

30. It is shown by the results that the morphology of microstructure is dependent on the interrupted quenching temperature strongly.

31. Immediate quenching and tempering process of steel T 10 after low temperature salt bath chromizing was studied.

32. The prospect of the application of the magnetic field quenching was also put forward.

33. It was found that rapid quenching eliminates the secondary phase in the as cast alloy. An amount of amorphous phase is formed in the quenched alloy.

34. The effect of quenching agent on exfoliation corrosion resistance of 2519 alloy was investigated by means of hardness tests and transmission electron microscopy (TEM).

35. Fluorescence quenching and flash photolysis experiment proved that n-Bu_4NBF_4 could cause the dissociation of the exciplex to form separated radical ions effectively.

36. The quantifying water quenching depth and distortion of 45 steel samples was investigated.

37. The influence of speed steel hot quenching standard in structure and properties of metal is still a real problem in the producing process of tools.

38. The induction quenching realizes imitated stress strengthening, raises fatigue limit and service performance of the torque rod.

39. Especially is suitable for the thin stalloy workpiece and class of pinchcock isothermal quenching.

40. Several factors leading to quenching crack of dovetail cutters were analyzed. The heat treatment process was designed to prevent dovetail cutters from cracking.

41. The quenching mechanism was studied in a quenched dye laser pumped by excimer lasers.

42. The induction quenching realizes imitated stress strengthening, raises fatigue limit and service ...

43. Wear resistance of 65Mn ( 65SiMnR)steel ploughshare may be improved obviously by means of isothermal quenching.

44. In order to improve surface properties of the materials, high-frequency induction quenching and wide-bond laser quenching techniques were used in this test.

45. Practical results show that wear resistance of the groove surface is improved remarkably by laser quenching. It is an effective way to prolong the service life of the piston head.

46. The induction quenching realizes imitated stress strengthening, raises fatigue limit and se...

47. Two new quenching methods are proposed as follows:1. Interrupted quenching, whereby the work-piece is first cooled in water or a water-based solution, then cooled in the muddy quenching medium, 2.

48. Experiments for hot mold shell with isolated hot spot by local water quenching in investment casting before and after pouring were conducted.

49. The quenching effect of the colors in the biology sample may lower the counting efficiency, It can be eliminated after decolorization of the sample or corrected by some other means.

50. The application, influence factors and process control of four kinds of heat treatment methods including tempering, carburizing, nitriding and induction quenching are analyzed.

51. During the laser quenching process, the hardness layer distribution remains nearly the same, aside from the input-output area.

52. To know heat treatment of vacuum, carbonnitriding, carburizing and protected quenching etc.

53. The fluorescence quenching of aromatic oxazole derivatives by CCl4 in different solvents was studied.

54. The system includes: quenching device, the hydraulic system, automatic control (PLC) systems, quenching liquid cycle cooling system.

55. High quenching rate which can be obtained by the rational combination of quenching parameters mentioned above is the key to gain noncrystalline structure and high quality amorphous strips.

56. The relationship among the equivalent distance, the sample diameter and the quenching intensity was regressed according to different diameter range of the cylinder sample.

57. The test methods of cooling characteristics of quenching oils were introduced.

58. To respond to quenching, the carbon content must be about 0.30 % or more.

59. Objective: To study the effects of geometrical isomerisation on singlet-oxygen quenching by lycopene in vitro.

60. Effects of quenching agent on grain boundary precipitates and precipitate free zone (PFZ) in 7055 aluminum alloy have been investigated by transmission electron microscope (TEM).

61. In 1969, the following enterprise by Beijing gage start light quenching.

62. The rational selections of quenching medium and material of parts will help product quality be a controlled condition and ensure raising product quality.

63. In addition, the magnetic field quenching will increase the resistance of the T10 steel to tempering because of a large amount of dispersed carbides in the steel after magnetic field quenching.

64. The results showed that within a certain diameter range hard-face depth of shell quenching was disrelated to the diameter of workpiece.

65. The combination reaction of theobromine with BSA is a single static quenching process and theobromine can effect the conformation of bovine serum albumin.

66. Through the results and analysis, we can discover that utilizing heat transfer theory and computer technology to simulate magnetic field quenching process is feasible.

67. This result is very useful to replace quenching oil with water-based quenching liquid in the future.

68. Steel - Hardenability test by end quenching ( Jominy test )?

69. The results indicate that the primary failure causes are the high quenching heating temperature and the low concentration of liquid coolant. The improvement measures are proposed.

70. The effect of interrupted quenching temperature on the microstructure and mechanical properties of a direct quenched and self tempered martensitic steel has been investigated.

71. Methods The photosynthesis curves of light intensity, chlorophyll fluorescence parameter of different light intensity and inductivity of non-photochemical quenching of chlorophyll fluorescence in 3.

72. Based on the results of laboratory experiment, the technical parameters of laser quenching process were selected. The roughing roll of Wire Rod Mill at Pangang was laser quenched.

73. The influences of various isothermal hardening treatments on microstructure and properties of semi-steel made by quenching and isothermal hardening and forging, which contain 1.

74. The results show that there is hypochromic effect on the subtract UV spectrum and quenching of fluorescence intensity of riboflavin with increase of concentration of DNA.

75. The fracture is brittleness cleavage one because that mechanical property of axle is disqualification and quenching crack presence on the surface by the surface treatment.

76. Some preparation technology, such as the method of water quenching the molten alloy and explosive welding, are briefly introduced.

77. The quenching mechanism of phenazopyridine hydrochloride to bovine serum albumin static quenching and non - radiation energy transfer.

78. The quenching mechanism of phenazopyridine hydrochloride to bovine serum albumin is static quenching and non-radiation energy transfer.

79. It was concluded that over heated quenching and improper grinding caused quenching and grinding cracks,(http:///quenching.html) leading to fracture failure of translation cam.

80. The utility model discloses a burner used for quenching in hole, in particular suitable for quenching the partial surface flame in pin hole at hook tail of hook of the train.

81. A class degenerate quasilinear parabolic systems is considered. The local existence is proved. In some conditions the solution quench in a finite time. And an estimate of quenching time is given.

82. It is found that there are intense radiation trapping and concentration quenching effect in erbium-doped tellurite glasses.

83. The quenching microstructure of low carbon steel after austenizing with and without DC electric field was studied.

84. The disposals process of water quenching for blast furnace slag and its characteristics were stated briefly, and the technical characteristics of TYNA and its application were introduced mainly.

85. Subsequently the eloquent man frequently asked the consequence of quenching in sequence.

86. Using electron microscope, the bainite morphology of spheroidal graphite cast iron after isothermal quenching was investigated.

87. The heat treatment technology of carbo - nitriding of steel has the characteristic of lower treatment temperature and direct quenching.

88. The emphases are put on the cooling curve analysis, hardenability prediction, quenching methods, distortion, modeling microstructure and process, gas quenching, water gas and spray quenching.

89. Hard Spot. An area in the pipe with a hardness level considerably higher than that of the surrounding metal, usually due to localized quenching.

90. The quenching crack was mainly caused by the metallurgic defects all well as well as the unreasonable structural design and improper machinework.

91. According to feature of 6A02 aluminum alloy and quality requirement of the shapes, spray quenching and forced air quenching on the shapes flowing bed of extruder were conducted.

92. Thebeverage has many functions such as promoting the secretion of saliva and quenching thirst, whetting appetite, promoting the development of children, resisting apolexis andanticanceration.

93. Very average wines capable of quenching thirst but little else. Straightforward and unremarkable.

94. The processing technique of centrifugal grainy equipment and water quenching method for molten steel slag was studied in this paper.

95. The performance and applying effect of the gelled material from the water quenching slag for backfilling are described.

96. The oxidation of boronized knives during heat treatment depends chiefly upon the oxidizing power of the quenching medium, this problem has been solved by using the water quenching oil cooling process.

97. If some coolant is injected from top to increase the total flooding rate, the quenching time gets shorter at all elevations.

98. For high-frequency quenching, need the data of recording the monitor data and clear WI.

99. The effect of SST103 quenching medium on hardness distribution and cracking character of low chromium semi-steel were studied.

100. The utility model relates to a plate spring vertical quenching device controlled by a computer, which is suitable for the plate spring quenching of various vehicles.

101. The distribution of the temperature field during magnetic field quenching is a kind of new research.

102. Effects of sample volume, type of the counting vial, solvent and turbidity quenching on the Cerenkov counting efficiency are observed.

103. Adopting the cooling way of water quenching oil to perform the heat treatment quenching, to make the mechanical property of forgings meet the technical requirements.

104. The results showed that after the deformation of unrecrystallized austenite and quenching, martensite block width decreased and bent, while the packet size increased to some extent.

105. The results show that quenching way has the most obvious effect on the mechanical properties of the alloys. Water quenching can improve the mechanical properties of the alloys more.

106. Crack arrest was executed around the quenching crack tip inside the metal die of T10 steel through pulse current discharge with the new super-density pulse current generator model ZL-2 self designed.

107. Experimental results showed that the service life of die can be improved evidently by using high temperature quenching and stress relief annealing.

108. In this work,(http:///quenching.html) the photoreduction and the triplet quenching of ketocoumarin derivatives have been studied by laser flash photolysis method.

109. Hyperglycemia has been shown to potentiate ischemic injury of the spinal cord by quenching vasodilators and potentiating tissue acidosis and free radical production.

110. Precisely measuring and tracing is a precondition and basis of arc-suppression coil with automatic tuning accurately compensating system capacitive current and efficiently quenching ground arc.

111. And have soft water cooling system, the upright hydraulic pressure quenching machine tool assort that.

112. On the premise that the tensile strength and the end quenching hardness don ′t decrease too much, the impact value can be greatly increased by increasing chromium content in composition range.

113. Four kinds of dual-phase steel with different morphology were developed by means of step quenching treatment routes.

114. Two special processes using interrupted quenching are a form of tempering.

115. For studying spray-quenching process of large-scale forgings, spray-quenching equipment was developed, and experiments of spray quenching on shaft type parts were carried out.

116. The surface induction quenching test on gray iron and spheroidal graphite cast iron indicated that the equipment was easy to operate, and had strong stability, it was provided with practicality value.

117. Quenching crack propagation characteristics of the organizations on both sides without decarburization phenomenon significant difference between crack and materials and forging cracks.

118. A cybernetic model system scheme on interaction of arc and circuit is introduced and its functions in the field of studying the bum-ning and quenching processes of arc are discussed in this paper.

119. As quenching liquid, stir frying with vinegar is better than brine under the experiment condition.

120. However, brine or water quenching is capable of rapidly bringing the surface of the quenched part to its own temperature and maintaining it at or close to this temperature.

121. Effects of quenching agent on the polarization curves and intergranular corrosion resistance of high-strength aluminum alloy were investigated in this paper.

122. The results indicated that fatigue fracture of the wire rope resulted from the secondary quenching caused by abnormal gliding friction of its surface.

123. Study found that there is interface fluorescence effect, interface fluorescence quenching, resonance scattering quenching and hypochromic effect first in the world.

124. The results show that X80 pipeline steel obtains sorbite after quenching and tempering, gets pearlite by normalizing.

125. The cap shaped induction coil and water sprayer used in rail end hardening are introduced and suitable quenching process parameters specified in the paper.

126. There are nevertheless some advantages in using a quenching circuit even with a self - quenching counter.

127. The poly(tetrafluoroethylene) particles untreated with quenching showed poor abrasion performance with 22% wear rate after 10 weeks, despite better scale-preventing and scale-removing performance.

128. A better quenching effect is obtained when the temperature increases; and the quenching result is also influenced by the mixing time of fluorescence quenching agent and the pulp.

129. The tensile strength, elongation and hardness of T10 steel subjected to magnetic field quenching and to high temperature tempering were separately increased by 28%, by 8.

130. The back-space decreasing is benefit to improve the arc voltage, pressure of arc chamber and change the arc motion in arc quenching chamber.

131. Using the maximum principle, we give the location of the quenching points for the solution for a degenerate parabolic equation, and we also show the estimate of the quenching time.

132. Photobleaching of oxygen sensitive membrane is the key factor to influence the photo stabilization of the fluorescence quenching based oxygen sensors.

133. Mainly for spare parts heat treatments and so on metal parts quenching, cyaniding , annealing and tempering uses, especially is suitable for the fastener, the standard letter heat treatment.

134. The quench sensitivity of 7055 aluminum alloy was studied with time-temperature-hardness curve evaluated via interrupted quenching and transmission electron microscopy.

135. Several methods for refining grains including annealing, adding grain refiner and quenching were discussed.

136. Quenching crack deep and long, straight fracture , fracture surface without oxide color.

137. By making use of quenching and thermal-analysis technology, experiments showed that solidification process of CV-graphite cast iron during eutectic reaction can be divided into two stages.sentence dictionary

138. The study shows that increased burning temperature with quick quenching is and important way to increase the clinker quality.

139. In 1978, the complete machine tool research institute of Beijing guide surface contact quenching process and equipment, quenching condition of quality inspection.

140. The technological conditions of preparing polishes from bastnasite such as pretreating with hydrochloride acid, roasting and quenching were studied.

141.

142.

143.

144.

145.

146.

147.

148.

149.

150.

151.

152.

153.

154.

155.

156.

157.

158.

159.

160.

161.

162.

163.

164.

165.

166.

167.

168.

169.

170.

171.

172.

172. is a online sentence dictionary, on which you can find good sentences for a large number of words.

173.

174.

175.

176.

177.

178.

179.