1. Calibration of the measuring system was done before the insertion of the probe into the rectum.

2. The authors developed a measuring system incorporating thermal probes.

3. Magnetic heading measuring system is a system which uses earth's magnetic field to heading.

4. In ordinary laser tracking and measuring system, the target coordinates are determined by measuring the variation of distance and the turning angle.

5. A moisture measuring system, including the sensor, can be applied in measuring moisture in pressboard of transformer coils during the drying process.

6. The space rendezvous lidar measuring system can be used to measure spatial dynamic object information of distance, speed and orientation.

7. A set of - precision dynamic pressure measuring system and man-machine interaction data processing soft are set up.

8. The measuring system also has a position and control precision with stepping motor.

9. Measuring system is made up of angular position pick up and electronic digital display.

10. A high temperature open resonator measuring system for low loss radome materials is introduced.

11. The above-mentioned measuring system owns the characteristics of the big diagraph scope, high accuracy, portable and low limit to the environment. It is very suitable for the mechanical workshop.

12. A minimum measurable height is inevitable for each measuring system. When the oil level in tank is lower than this minimum, a measuring error larger than predetermined value may be caused.

13. Spectral analysis on the signals in the measuring system is given, and the signal to noise rate is calculated, then the theoretical accuracy$...

14. The total error budget of the measuring system is presented.

15. Measuring system with the means to move a probing system and capability to determine spatial coordinates on a work-piece surface.

16. In this paper, an oil film thickness VXI measuring system of the thrust bearing test has been applied to set up a new kind of optical fiber reflective sensor mod el.

17. Regarded as the traditional 2-D coordinate measuring system, omnipotence tool microscope has the most extensive application in the geometry measurement.

18. In this paper a non contact measuring system for free form surfaces is proposed based on coordinate measuring machine, PH10 probe head and laser triangulation probe.

19. This dissertation introduces in detail the design framework, working principle and performance parameter of the new-type measuring system.

20. A new video judging technology has been used mainly to the real - time measuring system of vessel.

21. Because the invasive measuring technique has many disadvantages, A noninvasive measuring system of isovolumetric bladder pressure by controlled inflation of a penile cuff has been designed.

22. This research and design based on three-color multi-function color CCD measuring system is not only good to make up for this flaw, but also to complete the monochrome CCD measuring system functions.

22. Wish you will love and make progress everyday!

23. In this paper, depending on available theory and literature, it studied a kind of measuring system of facial skin condition based on statistical feature analysis of image texture.

24. A mixing frequency excitation current source is designed according to the analysis of requirements of the bioelectric impedance measuring system.

25. Site test proves that this design meets the demand of phase angle measuring system for real-time data processing.

26. In order to measure and study the electricity generating performance of the piezoelectric ceramics (PEC), a measuring system for the electricity generating capacity of the PEC was developed.

27. The voltage coefficient of a standard air capacitor was measured by the designed measuring system. The results and uncertainties under different voltages are given.

28. From the Reliability and stability design of computer controlment system, design Reliability for the measuring system.

29. It is urgent to develop a more effective thread measuring system suitable for stable production.

30. Against the arduousness and dangerous of the measure work to the road sign, a digital picture measuring system is designed on the basis of CCD camera, distance sensor, gyroscope, etc.

31. The effective pore volume is obtained by correcting the compressive strain of the apparent effective pore volume under the measuring system.

32. The math model about synchronism controlling between line scanning rate of CCD and object moving speed in the TDI CCD intersection measuring system is established.

33. Implement PFMEA, control plan, measuring system evaluation in production to make the continue improvement.

34. Spectral analysis on the signals in the measuring system is given, and the signal to noise rate is calculated, then the theoretical accuracy of phase difference is derived.

35. The expansion of SCORPIO-2104 software system and the establishment of a new realtime measuring system are described. A practical example in experimental reactor physics is also given.

36. A blast - loading measuring system with stable performance was established based on the principle of dynamic caustics.

37. In this paper, An automatic measuring system for pyroelectric coefficient has been set up.

38. An automatic measuring system for the relative spectral response of IR detectors by using Fourier Transform Infrared (FTIR)Spectrometer bas been developed.

39. The structure and composition of the intelligent hydraulic disk brake, and the function and the testing process of wear measuring and temperature measuring system were introduced.

40. A tool presetting measuring system based on computer vision measurement is introduced, and the measurement principle and system construction are analyzed.

41. Describes the design method, purpose and basic principle of the optical cruor measuring system.

42. In this paper, at first viscoelastic behaviours of volume deformationare expounded. The discontiguous measuring system on real time volume deformation are obtained.

43. A new kind of generator rotor temperature measuring system is designed based on optical absorption behavior of GaAs semiconductor.

44. This paper presents a measuring system of the concentration of penicillin with DSP based on the theory of ISFET.

45. The design method of on-line shell temperature measuring system is introduced in this paper. It is emphasized to measure shell temperature with thermal couple and ADAM module here.

46. HPR-1 solid magnetic heading measuring system is just researched and developed out in such background.

47. But the tendency is restrained by traditional level measuring technologies in aircraft fuel quantity measuring system.

48. Traditionally , the surface contour instrument or three - coordinate measuring machine is used in - D surface measuring system.

49. Whether the three-ring reducer is qualified is measured automatically by measuring system, which can trigger sound and light alarm system for unqualified product and record it.

50. The quasi-static input-output linear regression equation of the measuring system is established, and the testing results of input-output curve linearity and sluggishness are given.

51. The performance test summary record of the RF-SQUID measuring system is briefed in the end.

52. The author describes in detail the application cf computer colour matching and measuring system to continuous pad dyeing process.http://

53. The researching intention of this paper is to establish a high precise and real time harmonics measuring system.

54. Use an advanced laser measuring system to inspect position accuracy, pith, and backlash compensation of machine body.

55. From the perspective of statistical mechanism and application, the subjective measurement is the mainstream method in corruption measuring system.

56. The aircraft used high-rate optical measuring system, equipped with a rotary encoder of the eyepiece micrometer will further enhance the process of measuring the degree of automation.

57. Spectral analysis on the signals in the measuring system is given, and the signal to noise rate is calculated, then the theoretical ...

58. It has a description of the principle of measuring temperature using acoustics pyrometry, as well as the basic structure of the temperature measuring system.

59. In view of the operational characteristics of ground-source heat pump systems with vertical ground heat exchangers, develops an underground temperature measuring system.

60. Impulse voltage measuring system is very important in high voltage test.

61. The serial communication system can realize real-time data communication among self-collimation theodolite, electronic gradienter, center computer and computer of measuring system.

62. The On line measurement of aspheric workpiece surface is made by using a precise calibrated, low force, air bearing LVDT and the measuring system composed of corresponding software and hardware.

63. The principle and structure of the diameter measuring system. to which the optical imaging method is applied and the assembled CCDs are used as photoelectric detector, are presented in the paper.

64. Consequently, the thermally generated particles cause many droplets to form into the cloud, which is then detected by the measuring system of the Cloud Chamber.

65. This article discusses the principles of multistation laser tracking and measuring system, and gives a mathematical model to calculate the coordinates of moving targets.

66. In this paper, a three-dimensional measuring system for surface asperities is described, in which a microcomputer is interfaced to a stylus profilometer.

67. Digital signal processors (DSP)used for the realization of measurand reconstruction is a part of the measuring system.

68. This paper analyzes the absolute zero point problem of theodolite angle measuring system and advances using HL device to solve the problem.

69. A method for detecting the protrusion height of diamond abrasive grain on diamond wheel was proposed based on the digital image identification technology, and the measuring system was established.

70. The implementation of this photoelectric trajectory measuring system and the hardware design of its computer control system are mainly discussed, including algorithm and programming steps.

71. This measuring system is composed of worktable, clamping and adjusting structure, optical system, digital camera, image card and computer. Picture 1 is system structure diagram.

72. An automatic measuring system designed for evaluating the print quality of uncoated ink - jet paper is presented.

73. If outgassing or pollution is expected, we also recommend a regular maintenance of the measuring system.

74. With microcomputer, a automatic measuring system of blast volume for the bursting gas pool in sewage treatment was built.

75. The infrared laser plume measuring system is established to evaluate the performance of solid propellant.

76. The three-layer structure database system based on the CORBA data module to enhance the measuring system exchange adaptability, safety and expansibility.

77. An induction heating temperature measuring system is put forward in this paper, which consists of an infrared radiation pyrometer and an industrial personal computer(IPC).

78. This paper presents a new computerized data measuring system, in which a reliable mathematical model is used for measuring the linearity of lathe slideways.

79. Along with the advancement of missilery, the requirement for the precision of positional measuring system is in incessant development.

80. It analyzes particularly LVDT transducer technology used in the measuring system of caliper gauge and further demonstrates effect of the gauge.

81. In case of outgassing or pollution caused by the specimen we recommend regular maintenance of the measuring system.

82. IR measuring system was developed aiming at the demand of low characteristic signal propellants. The system was used for measuring several formula propellant plumes.

83. The measuring system consists of a pulse amplifier, a rectifier, an integrator,[http:///measuring system.html] and a pulse counter.

84. This paper describes the method of making a measuring system for repeatability precision in six-dimensional space with displacement sensors, the arrangement and errors of the system.

85. A method that measuring angular displacement error, identifying parameters of error model and compensating error automatically was put forward based on inductosyn angular measuring system.

86. The concentration distribution of pulverized coal in blowpipe of blast furnace was measured in an isothermal two-phase model by means of a computer measuring system based on infrared transmission.

87. The reason and type, the establishing measuring system, simple judgment of type and position about Resin insulation dry-type transformer partial discharge are introduced in this paper.

88. A measuring system for magnetic remanence coefficient of the HV current transformers is explained.

89. A new type of solar panel substrate planeness measuring system is introduced in this paper, and the calibration method has been studied thoroughly.

90. In order to realize time synchronization between measuring system and periphery in the angular distortion measuring system, the time - code generator is developed.

91. The measuring system with microcomputer for inlet and outlet flow field of the Francis turbine runner is described. The pitot probe with 5 holes was used as sensing element.

92. According to the actual application of operating experiment in the thrust bearing test board, the designed oil film thickness VXI measuring system shows better performance.

93. The measuring system consists of a CNC coordinate measuring machine , PH9/PH10 probe head and LB? 12 non-contact laser probe.

94. A non-contact and automatically measuring system for railway wheels geometric parameters is developed in order to change draggle status quo and hold rail wheels states in time and correctly.

95. Afterward, researches have been done into the precision of the whole measuring system from the joint variable and constant parameter of the robot and the influence of the temperature.

96. A new measuring principle which can increase the accuracy of the angular indexing measuring system is presented.

97. The make up and basic principles of a flame temperature measuring system using colored array CCD (charge coupled device) are described along with an analysis of its major error sources.

98. The article touches upon the principle of displacement measuring system consisting of diode laser focusing lens, reflecting main scale grating, quarternary index scale grating photosensor.

99. A new integrated measuring system for curved surface roughness waviness and form error is introduced.

100. The test results show that the methods introduced above are effective and correct, and have been applied in the radar receiver integrated measuring system.

101. With the measuring system equipped with a microchip solid laser and a unique refractive index matching cladding mode filter, the transmission loss of a double clad fiber laser was measured.

102. Measuring system for antenna pattern was developed based on analysis of measurement principle.

103. The design of measuring system of dynamic contact resistance is achieved, including: hardware design and software design.

104. A reflecting hologram diffraction grating was fixed to the stage to form a closed loop displacement measuring system.

105. A light source driving circuit with soft starting function and constant brightness control is designed and used photoelectric receiver can fulfill the demands of the measuring system.

106. The measuring system with CCD has an advantage on the geometricalsense meterage , such as high precision, high efficiency , automatization, noncontact, etc.

107. This article introduces the working principle and the key technology of video extensometer measuring system, and analyses the development trend of the video extensometer.

108. A light-pen single camera 3D coordinate vision measuring system is proposed in this paper. It mainly consists of a light pen, a CCD camera and a laptop computer.

109. If only dielectric loss angle of grain was measured, the measuring system can get grain moisture content by seeking table and calculating.

110. To solve the problem of inline measuring hobs with bigger modulus in practice production, an inline measuring system for the circular pitch error of hobs is introduced.

111. This paper presented a measuring system test skins color and reflecting spectra with optic fiber probe.

112. A method for velocity variation with variable frequency(VVVF) of an induction motor was developed in an industrial process control computer measuring system of automobile pump.

113. A hardware platform of binocular stereo measuring system with simple structure was built with low cost, which consists of CCD cameras, lens, a frame grabber card,[/measuring system.html] a computer and a tripod.

114. When colour matching and measuring system is directly connected with production machines, the sampling period can be shortened from previous 2-3 days to only some hours.

115. Based on photoelectric detecting principles, an advanced smoke concentration automatic measuring system with computer and photoactive sensor has been developed.

116. This paper presents the input voltage shape reconstructed by FFT method from the distorted output shape and unit step response of impulse high voltage measuring system.

117. The novel infrared spectra measuring system using AOTF(Acousto-Optic Tunable Filter) as dispersive element is presented.

118. The basic principle of this method is discussed and a measuring system is established to simulate the practical measuring condition.

119. This paper introduced a new type of ultrasonics dental descaler measuring system based on ARM embedded technology.

120. This paper introduces a design of Automobile Ignition Coil Measuring System.

121.

122.

123.

124.

125.

126.

127.

128.

129.

130.

131.

132.

133.

134.

135.

136.

137.

137. try its best to gather and make good sentences.

138.

139.

140.

141.