1. Phenol, reaction products with isobutylene, styrene and 2,4,4-trimethylpentene.

2. These butylraidicals bring about a rapid polymerization of styrene.

3. The styrene monomer, as the continuous phase, constituted the framework of PS/DVB porous polymer after the polymerization.

4. Styrene - maleic anhydride copolymer (SMA) is one kind of special thermoplastic material with superior heat - resistance, and is capable to blend with many kinds of resins.

5. Modified polyethylene resin (SPE) is PE resin and styrene - butadiene copolymer by high-temperature reactor mixing to make of resin particles.

6. The polymerization of styrene in O/W, W/O, and BC microemulsions was investigated by using the water - soluble potassium persulfate and oil-soluble azo - bis - isobutyronitrile(AIBN) as initiators.

7. Crude product by simple distillation, styrene recovery was 89.41% of total styrene monomer purity of 99.9%, and catalyst recycling, the effect is better.

8. Briefing production technology of Styrene - Butadiene Rubber advancement, it analyzes domestic market demand of Styrene - Butadiene Rubber .

9. Take butadiene, styrene, and methyl methacrylate as main materials, assist with one or more of itaconic acid, maleic acid, fumarate, and not saturated carboxylates to modify.

10. The styrene acrylate emulsion is prepared through the emulsion polymerization.

10. Wish you can benefit from our online sentence dictionary and make progress every day!

11. First, the nature of dehydrogenation of ethylbenzene to styrene was studied in an experilmen - tal adiabatic reactor.

12. Polymerization of any unconverted styrene and diolefins is accelerated at the dew point condition.

13. The epoxidation of styrene - isoprene block copolymer ( SIS ) in different organic solvents was studied.

14. The method for determination of acrylic nitrile and styrene monomer in polymer polyatomic alcohol by gas chromatography was introduced.

15. Polystyrene: Styrene offers excellent clarity and stiffness at an economical cost.

16. The cyanate Resin is modificated by styrene and divinyl benzene , which are called active diluent.

17. Unsaturated polyester(UP) crosslinked by styrene has poor toughness. In this paper, diallyl phthalate (DAP) was used as co-crosslinking agent with styrene for toughening UP.

18. To ensure low leakage current and low dielectric absorption, the feed back capacitor should be made of a suitable dielectric material such as poly styrene, polypropylene, or Teflon.

19. The synthesis of isobutyraldehyde 1,2-propanediol acetal from isobutyraldehyde and 1,2-propanediol catalyzed by the strongly acidic cation exchange resin of styrene system was studied.

20. EA309 is the dehydrogenating tail gas cooler in unit 300 of styrene workshop in chemical works No. 1. which inlet section is circular section vessel.

21. High performance quadripolymer latex for waterborne anti-corrosive paint is synthesized by use of butyl acrylate, styrene, acrylonitrile and acrylate acid.

22. The influence of different MMT to polymer torque was compared, MMT modified by styrene monomer has the largest effect to polymer torque.

23. A polymer VSMA, which could be used as diesel pour point depressants, was copolymerized with vinyl acetate, styrene, maleates and acylamide as material.

24. A kind of crosslinking modified organic glass was prepared by mold copolymerization of methyl methacrylate, styrene, methacrylic acid with divinylbenzene as crosslinking agent.

25. PMS cau be used for making synthetic rubber lastend of styrene.

26. Physical and chemical behavior of YH - 05 , Dow - 675, SD - 656 carboxylated styrene - butadiene latex in paper coating are discussed.

27. A kind of crosslinked transparent material was prepared by mold copolymerization of methyl methacrylate, Styrene methacrylic acid and divinylbenzene as crosslinking agent.

28. Formed in 1966, the company specializes solely in manufacturing caskets and urns made out of high-impact styrene plastic.

29. In this invention we provide a high-molecular polymer modifier called SPS which is a mixture of dipolymer, tripolymer and multipolymer of styrene molecules.

30. Evergreen Scale Models is the world's largest producer of styrene plastic shapes, strips, and sheet materials in metric and inch sizes.

31. This paper has reviewed the present situation of the application of metallocene catalysts in homopolymerization and copolymerization of styrene.

32. Heat of the main construction material sealant mainly isobutene polymer, EPDM rubber and thermoplastic styrene block copolymer.

33. Processability, foams structure and dynamic property of LDPE foams are changed due to ESI addition, and shows different changing tendency along with different styrene monomer content in ESI copolymer.

34. The copolymerization process of oil-soluble monomer (styrene) and water-soluble functional monomers (methacrylic acid and acrylic acid) has been studied.

35. The influence of several factors on the preparation of the macromer was studied. In addition, the curing behavior of the macromer with styrene was al...

36. This paper relates a lab research job of preparation of PSNAMA terpolymer by terpolymerization of styrene cationic nitrogen compound with acrylamide and acrylic acid.

37. Polymeric surfactant CMC-A9, which has high molecular weight and excellent surface activity, was used together with SDS in ultrasonically irradiated emulsion polymerization of styrene.

38. The graft copolymerization of acrylic acid onto acrylonitrile butadiene styrene(ABS) terpolymer was initiated by benzoyl peroxide (BPO) in 1,2 dichloroethane solution.

39. Our core products are propylene oxide (PO), tertiary butyl alcohol (TBA), styrene monomer (SM), toluene diisocyanate (TDI) and aliphatic diisocyanates (ADI).

40. Styrene degassing tower is one of chief equipments of styrene monomer recover system of StyreneButadiene Rubber device.

41. The application of wet ground sericite to natural rubber and styrene - butadiene rubber was described.

42. The cyanate Resin is modificated by styrene and divinyl benzene,[Sentencedict] which are called active diluent. The modificated resin system has low viscosity and store stability.

43. Sheets sized with styrene copolymers showed better ink hold-out for cambogia and soot-ink, but less than ideal hold-out for indigo and carmine.

44. Cement mortar is modified with styrene - acrylic ester ( SAE ) copolymer emulsion.

45. Conversion rate and content of dipolymer of styrene in the liquid product increases with the increase of temperature under operating conditions respectively.

46. Polystyrene ( PS ) is a thermoplastic resin, made from polymerized styrene.

47. QC Group of Styrene Workshop, Chemical Plastic Factory, Wushun Petro-Chemical Corporation.

48. Styrene epoxidation was carried out using styrene as the row material, molecular oxygen as the oxidant, and modified vanadium phosphorus oxide as the catalyst.

49. Starting from preparation of hydrophilic coating, a study was devoted to the effect of the fine grains of styrene divinylbenzene resin on the performance of hydrophilic film.

50. The output of styrene monomer was 84.5% and its purity was above 99.9% through simple distillation.

51. Mathematical simulation has been performed by means of electronic computor for two types of ideal flow reactor systems used for the thermal bulk polymerization of styrene.

52. Latex particles were obtained by soapless emulsion copolymerization of styrene (St) and methyl methacrylate (MMA) in the presence of functional monomer acrylic acid (AA) .

53. METHOD AB 8 resin was treated with alcohol and propanone and the extract was detected for the content of the residues of benzene, methylbenzene, xylene and styrene.

54. The results showed that the main product was benzaldehyde and a little by-products were styrene oxide and phenylacetaldehyde.

55. There were not n-hexane, benzene, toluene and xylene, o-xylene, styrene and other organic solvent residue in the purification of apple polyphenol by the headspace gas chromatograph.

56. The PS water reducing agent, which is very effective for concrete, has been made from waste poly styrene(WPS) by sulfuric acid of fuming sulfuric acid sulfonation process.

57. The preparation and properties of the copolymers of Styrene acrylic acid and methyl methylacrylate are introduced.

58. Microporous styrene type weak basic anion exchange resin D370 is used to refine acrylamide solution in microbial method.

59. Output of styrene monomer was 82.3 % . Purity was 99.9 % , obtained by simple distillation.

60. Being a bivinyl crosslinker, 3 could be copolymerized with styrene giving gel-type resin with superior swelling characteristics.

61. The method of liquid phase rearrangement of styrene oxide to phenylacetaldehyde catalyzed by SAStype solid acids and molecular sieves was studied.

62. The addition of styrene monomer favors the formation of the grafted copolymer.

63. Arbutus resins were obtained by heterogeneous graft copolymerhation of polypropylene ( PP ) with acrylonitrile ( AN ) and styrene ( St ).

64. The research development in catalysts for Syndiotactic polymerization of styrene is re - viewed.

65. The polymerization kinetics of styrene catalyzed by Ziegler-Natta catalyst and the effects of prepolymerization conditions on morphology of prepolymer particles were systemically studied.

66. Catalytic dehydrogenation of ethylbenzene is an important method for production of styrene.

67. HSBR ) was prepared by hydrogenating styrene - butadiene rubber ( SBR ) latex with hydrazine hydrate - hydrogen peroxide - copper sulfate catalytic system.

68. CR/ polystyrene (PS) IPN blend was prepared by stepwise synthesis based on CR and styrene monomer and using divinyl benzene(DVB) as crosslinking agent of PS.

69. I perennial companies operating chemical raw materials: styrene, anhydride, phthalic anhydride, and so on.

70. PA6/PP alloy was prepared with styrene grafted with maleic anhydride copolymer (SMA) as compatilizer.

71. Determination of residual styrene monomer in polystyrene and acrylonitrile - butadiene - styrene resins by gas chromatography.

72. Water absorption, emulsifying property and crystalline property of the amphiphilic ( styrene - butadiene - ethylene oxide ) multiblock copolymers were studied.

73. The invention belongs to the field of inorganic materials technology, specifically as a solid acid catalyst - grafted poly styrene sulfonic acid preparation method of carbon nanotubes.

74. The optimum conditions for the technological process of recovering styrene monomer from foamed polystyrene were found.

75. The hydroperoxidation product (EPHP) was used to initiate olefine monomers, such as styrene, etc. for grafting copolymerization and examination of toughening effect of the grafted EP in the blend.

76. METHODS Headspace GC was used to determine the skellysolve B, benzene, methylbenzene, styrene in Peristrophe baphica extraction.

77. Total 107 components including isomers were identified by GC-MS in the liquid product. The main reaction products were dipolymer of styrene, isopropyl benzene and dipolymer ofp-methyl styrene.

78. Its branch chains having double bond can copolymerize with vinyl monomers (such as styrene or vinyl toluene) forming a thermosetting resin.

79. Oxidative methylation of toluol to styrene is a new process studied widely recently.

80. That means for high styrene compounds e. g. tread compounds, the oil which has high aromatic content have better compatibility with it.

81. The result showed that DBD can effectively remove one of the representative hydrocarbon odor species - styrene.

82. Polyketone (STCO) was prepared by the copolymerization of carbon monoxide and styrene catalyzed by a composite catalyst system- palladium acetate, 2(),2' bipyrodine associated with a strong acid.

83. This paper deals with the model of energy transmission—conversion for styrene production. The model is formulated on the basis of the concept of energy unit and systems engineering.

84. Study of the Charge-transfer Complex between Styrene and Diethyl 2, 3-dicyano-2, 3-di(p, m- Dimethoxylphenyl)succinate or Acrylonitrile.

85. Result The top 5 chemical allergic resources of these patients were 0.1% thiomersalate, 5% nickel sulfate, 7% aromatic compound, 1% formaldehyde(water solution), 1% styrene.

86. The Building coating was prepared with addition of a certain amount of organo-siloxane for copolymerization in the process of polymerization of styrene and acrylic emulsion.

87. The catalytic dehydrogenation of ethylbenzene to styrene in zeolite membrane reactors was studies.

88. Cement mortars are modified by mixing styrene - acrylic ester ( SAE ) copolymer emulsion which is used as modifier.

89. The heat exchange tube of TT 201 heat exchanger in styrene plant of Daqing Petro- chemical Works leaked from hydrogen corrosion, fouling corrosion and turbulent flow corrosion.

90. It is shown that the particle diameter increased with the content of phenyl ethyne or polymer, but methyl styrene has almost no effects on particle diameter.

91. The styrene modified alkyd resin is featured by quick drying, high hardness and resistance to water.

92. Triethyltin maleate and fumarate were synthesi 2 ed and copolymerized with styrene and methyl methacrylate.

93. The team found that the various smaller styrene units were present in the same relative quantities Katsuhiko Saido of Nihon University in Chiba, Japan in both the lab and in the water samples.

94. Adding to early strength agentia and increasing the content of styrene in SBRL can increase the strength of 13% and 26.7%.

95. Rheological property of the blent system of modified konjac glucomannan and styrene - acrylic emulsion is studied.

96. Copolymer beads of styrene and divinylbenzene were sulfonated by microwave heating.

97. The PS hikes can be chalked up to an improving price market for benzene feedstock, which is used to make styrene monomer .

98. The invention is disclosed to be useful with the production and storage of any vinyl aromatic monomer and is disclosed to be particularly useful with the production and storage of styrene monomer.

99. Low solid contends emulsion adhesive for coated paper with acrylates[ ], styrene and compound emulsifier isis cheap.

100. Diarylethane was synthesized continuously from a mixture of styrene and xylol with synthetic SiO_2-Al_2O_3 as catalyst.

101. The catalysts, cocatalysts and polymerization mechanism of syndiotactic polymerization of styrene will be discussed in this review.

102. As per ICIS, Styrene Monomer deals were heard at US$910-925/ton CFR China, with expectations that prices could gain further ground on the back of tight supply in China.

103. Mossbauer studies of the action of Molybdenum on iron Oxide catalysts for thedehydrogenation of Ethylbenzene to styrene have been carried out.

104. Using cyclohexene, benzene and styrene as probe molecules, hydrogenate reaction in situ of hydrocarbons adsorbed on noble metal catalysts (egg-shell distribution) were researched by in situ FT-IR.

105. The coating is composed of styrene - acrylate emulsion, acid modified water glass and stain - resistant agent.

106. A series of adhesives were prepared from chlorinated polypropylene, vinyl triethoxy silane and styrene by solution polymerization, using benezoperoxide as initiator and xylene as solvent.

107. The catalytic systems and polymerization mechanism of styrene syndiotactic polymerization were reviewed with 29 references.

108. The catalyst system is very stable at ambient temperature and its stability is enhanced by addition of small amount of styrene monomer during preparation.

109. This paper introduces in details the engineering design for circulated cooling water treatment of Yangzi BASF Styrene Plant, including process flow, calculation and equipment selection etc.