1. The flange around the wheels on railway trains helps to keep them on the rails.

2. Although I have seen flanges in several places, nowhere are they more spectacular than on the Juan de Fuca Ridge.

3. When you work a flange, you park the sub right in front of it.

4. Hot water pools beneath these flanges, creating unique hazards for a pilot ascending the structure.

5. Its flange uses the bolt joint.

6. Rugged die cast aluminum flange and cover.

7. Professional flange designed to remove dirt floor and walls.

8. Remove cover and clean flange and reseal.

9. Press the flange and replace the side sealing ring.

10. It is composed of casing flange, casing cross joint, wellhead valves, tubing hanger, tubing head cross joint and accessories.

11. Lug body available with ISO flange dimensions and metric bolt hole threads.

12. Please give clear indication of flange, material and operating pressure if you need other standard.

13. In the production, may be used combined flange for easy demoulding and mould rotating mechanism for raising glass fabric spreading quality and reducing labour intensity.

14. Angle Flange Standard. Flat Flange: Specify hole pat-tern. If no drawing provided, flange will be blank.

14. is a sentence dictionary, on which you can find nice sentences for a large number of words.

15. When the flange width is large, the ultimate capacity of the members increases firstly and then decreases with the increase of positive and negative eccentricity.

16. These should fit into the well of the recessed window and have a flange which overlaps the edge of the well.

17. The bus had two sets of wheels, one with conventional tyres and another set of iron wheels with flanges.

18. Made from flexible synthetic compound that won't support bacterial growth, its self-sealing flanges grip the insides of almost any cistern.

19. Most replacement doors are fastened to the framing by nailing through a flange at the top and sides with 2-inch roofing nails.

20. The thing - it must have been five metres across - rippled its flanges invitingly and eased right to where we stood.

21. A tire tool or flat stock can be used to pry one part of the bead up over the rim flange (start near the valve stem).

22. Lode parameters are used to analyze the stress and the strain of the flange in calendering.

23. The contraction of the buccinator limits not so much the height as the width of the buccal flange.

24. Through the analysis forging defect structure, the main reason causing fold defects of the die flange yoke was the metal refluence by the wrong size of forging deformation.

25. After adjusting and installing with the spring balance bring 20 - 40N (as illustrated in figure 3) to bear on bolt hole in the small gear hub, the flange should be able to turn.

26. Relay. Coil voltage 6 VDC. Contact arrangement 2C . Terminal PCB. Enclosure top flange. Option neon lamp.

27. To reduce the cost and lead time of developing a trimming die, a method to obtain the trimming line in flange process is proposed on the basis of blank grid deformation.

28. The gear reducer is aligned based on 4 mark lines on sides of bottom flange and bedplate marks.

29. A tire tool or flat stock can be used to pry one part of the bead up over the rim flange.

30. It is also found that there is a close relationship between the stress in external tendon and the maximum compressive strain of the concrete flange slab.

31. The solving plans have been put forward by analysing quick connector and flange connector.

32. It is found that the cause of the fracture is the stress concentration at the hinge axle flange area.

33. A variety of connection types of flange; Rabbet:, output shaft and oil port.

34. Allow the sleeve flange to return to its original position.

35. Regulating valve and pipe thread connections have connections , flange connections and welded connections distinction.

36. If you can't unscrew the drain flange from the T-connector, use a reciprocating saw with a metal-cutting blade and cut the drain assembly away just above the T-connector.

37. Placing and riveting the flange, the Breitling symbol and the eight hour - markers requires tremendous manual dexterity.

38. An O - ring located in nacelle flange is applied between the grease channels in nacelle and bearing.

39. Then multiple factor analysis of OSC, including the thickness of outer shell, flange plate and web plate of T-shaped members, with or without ribbed stiffeners, is carried out.

40. An exact elastic solution for the general case of a circular flange joint under tension loading is derived.

41. GK serial helical bevel geared motor has high efficiency and long service life gear. It has feet panels arrangement, flange arrangement and shaft arrangement.

42. There are two leakages on the place near the flange of general service pipe. One is over the boiler and another one is over the door of engine room.

43. The analysis result indicates that in the original design of the exchanger, tubesheet and shell are safe. The tubesheet flange is not safe, however.

44. I plant annual production JIS standard, ANSI standards, DIN standards, UNI standard flange, in accordance with the drawings, various non-standard processing requirements flange.

44. try its best to collect and build good sentences.

45. A raising platform of machine tool for processing the flange of ship rudder blade is optimized by the integration of topology optimization and CAD/CAE system.

46. The invention relates to a pump pipeline, which consists of a flange, a pipe plug, a metal pipe and fluoroplastic.

47. For decades, American national standards institute (ANSI flange design has been for the oil and gas industry is provided one of the sealing technology, and effectiveness.

48. Tighten leaf spring press until bushing flange bottoms solidly against leaf spring eye.

49. Then, use the aquarium silicone to seal under the flange around all 4 screw holes and around the pipe hole and screw it down with 4 short wood screws.

50. Flange width has changed by strengthening the compression flange and strengthening the tensile flange.

51. The research of flow consists analyzing the velocity distributing rules of blade surface inside Kaplan turbine flange clearance and leakage flow of flange clearance under different conditions.

52. Reverse Cycle Type: pump body mounted directly on the motor flange for easy vaporization of liquid.

53. The crack was found in the oil-pipe flange of oilcan working for only three months.

54. By insulating flange at the junction between the new and old pipe, the long line galvanic cell is "broken up"- the anode (new pipe) is electrically separated from the cathode (old pipe).

55. Also as in large office gate switch sides, are equipped with flange is easy to replace them switch.

56. The ultimate bending capacity of CFRST joints can be considered as branch tube flange effective width failure mode.

57. The paper describes the common structure and some existing problems of flange joint on mill's cylinder, and the influence on manufacture organization.

58. Tightening down on special tool will push wheel stud out of the hub and bearing assembly flangRemove lug nut from stud and remove wheel stud from flange.

59. The volume flow amount is also calculated. The dimension variation law for rolling flange ring and the volume distribution law for its rolling blank are derived from the axial volume flow.

60. Molded - in liner fully supported by valve body at flange seals.

61. The flexible mount and integral hub shaft reduces cost, simplifies installation and reduces the overall depth by eliminating the traditional flange adapter and flexible coupling.

62. The shell of this serial fan is produced with the flange turn-up technology, and the blades are designed with special twisted curves to make the fan low in noise and high in air volume.

63. Three structures have exhibited cracking at the ends of flange gusset plates.

64. Relay. Coil voltage 48VAC. Contact arrangement SPDT... Mounting socket. Cover top flange.

65. The article also introduces the optimized roughcast of flange and the cruces in die designing. It states the main structure parameters and the working traits of the die.

66. Within the family, small diameter pipes, also low pressure, see flange connection.

67. In the design of float head heat exchangers, it is difficult to determine the thickness of the float head flange according to the equations in GB150-1998.

68. Accroding to the flanging die for cylindrical part, die using sliding punch to flange is designed.

69. For decades, the American National Standards Institute ANSI flange design for the oil and gas industry provides a seal applied technology, and effective.

70. So, in order to harmonize the elongation coefficient of web and flange and to avoid the rolling defects, The reduction ratio of flange should be larger than that of web.

71. Force the seal onto door flangContinue rearward until it is seated on flange.

72. The device mainly consists of connection flange, brake disc, braking caliper, bracing frame, force-multiplier pump, hydropneumatic pipeline and proportional control valve.

73. The corrugate pipe is divided into two parts, which are pressed by corrugate flange for sealing at the wave crest.

74. As a less using cylinder flanging die[ ], it is designed using a sliding punch to flange.

75. An open-ended magnetic core with alternating current coils was laid on the flange surface to come a closed magnetic circuit .

76. Entity model and FEM model of H beam straightening flange are established.

77. GW-type pipe-type non-clogging sewage pump flange on the same level of import and export lines, to pipe the form of installation, with pump installed base, very convenient to use.

78. A pillar to rocker joint assembly comprising a tubular pillar having a pinched flange near a lower end of the pillar is joined to a rocker assembly including a side sill and rocker reinforcement.

79. BP500 Series Hydrostatic Level Transmitter input directly into the liquid part of the sensor, Some fixed transmitter available flange or stent, convenient installation.

80. Install new lower barrel, place new snap ring and new flange on the new lower barrel, fixed by bolt nut.

81. Feed is blocked at the first bearing and the connecting flange of the screw conveyor.

82. Please consider the rounded edges as in the Door Flange drawing attached.

83. Structural forms: cylindrical, single - side box - type flange, W - type filter, chip, bag, shutter - style , frame type and so on.

84. The utility model relates to a screw head structure, which comprises a screw head, a flute, an inserting recess and a flange.

85. Notes:The sizes of serial valve connecting flange and butt-welding terminal can be designed according to customer's requirement.

86. A circular model with an inward fixed flange was used for the support points, with a general shear force introduced to realize the constraint conditions at the hinges.

87. Nominal length exceed 4m, shall add with flange or links of auris figure for reinforcement.

88. The top of the rectangle steel pipe column is inserted into an I-type steel. The flange of the I-type steel is fixedly connected to the flange of the rectangle steel pipe column.

89. Where misalignment between the inner and outer rings exceeds 1 minute of arc, the action of the load on the flange changes considerably.

90. Tightsen anaerobic flange sealants are suitable for smaller gap applications and rigid metal-to- metal assemblies, such as transmission pans, flanges, and transmission case covers etc...

91. Temperature Sensors were introduced on the exterior face of the flange plate to measure the temperature of the radiated area so as to make necessary adjustments timely of current, volt, focus, etc.

92. Current quotation process for hydrogenation reactor has been analyzed and the main affecting factor is the weight of pipe flange and the internals of the reactor.

93. Cast Iron Pipe Flanges and Flanges Fittings, 125 lbs. Conforms to related flange drilling.

94. Some proposal also was presented to the equipments manufactory. Some improvements should be adopted in the design, such as using shielding ring and conducting flange.

95. If there is leakage at the flange face-seal only, further tightening of bolts will almost never stop any flange joint leak.

96. Forbid welding the flange after installing the valve. Both sides of the flange should be added the asbestos gasket.

97. The local stress in the box beam is caused by the wheel pressure of the trolley conveyed along the track onto the upper flange and the web of the beam.

98. Lateral elastic coupling device of the locomotive bogie is a main provision of decreasing wheel flange wear.

99. On the level a stalk for of adjustment, applying gradienter in the water pumping or pump the flange top of the exit in the water.

100. An adapter flange and clamp-style shaft coupling allows easy assembly with a servo motor.

101. Flange at bottom, position monitoring optional, reinforced swing mechanism without overload protection device, double acting, max.

102. By setting supplemental allowance at arc wall to increase the round corner radius of inner flange of the open hole, the casting crack was completely eliminated.

103. Flange widely used wellhead equipment, oil trees and other well control equipment for connecting with.

104. If the closure head of the vessel consists of the large-scale flange and the head cover with the two of them weld together directly, the stress calculation error obtained by GB150 will be even larger.

104.

105. The tension side of the beam flange which was separated from the beam and the box-column formed the model for analysis.

106. The flange joint is a common connection form of high-rising steel tower structure, and bolt looseness of flange is the damage with facilitated occurrence in the structure.

107. The inner diameter part of the flange at one port of one end of the inner cylinder is provided with a rabbet for splicing with a flange without a rabbet at a corresponding end of an adjacent elbow.

108. Retighten all flange bolts in a star pattern in order to extrude rubber sleeve flange material.

109. Kits include mounting plate and hardware for mounting to flange or servo mount encoders, making them interchangeable with 5PY DC tach generators.

110. These lugs, combined with the Watts Flange Adapters, provide a ridged rotation free installation.

111. On the basis of the numerical analysis, forming laws of the metal in the flange area were induced and derived, and the forming velocity equations of metal in the flange area were obtained.

112. Notes:1. The sizes of serial valve connecting flange and butt-welding terminal can be designed according to customer's requirement.

113. The invention discloses a lower flange improved corrugated steel web plate composite box girder and a construction method thereof, which belong to the technical field of bridge structures.

114. If a boiler room or a production site, full of - scale - shaped flange connection of pipes and equipment.

115. The findings of the study could give us some information for better understanding and rational design of bolted flange joint.

116. Under certain pre - tension from flange joint bolt, leakage of flange sealing had an obvious decrease, thus resolving sealing failure in cover flange of heat exchange.

117. In this paper, flange area of sheet metal was the research object, influence curves and data of each stamping parameters to the forming velocity were obtained through the simulations of deep drawing.

118. In order to prevent mishaps with the union nut, slide it (smallest bore first) over the pipe or nipple and flange hub (when flanging) before making the joint to the end connector.

119. Produce and sell six head bolt , bolt , pairs of head bolt , carriage bolt the six flange, make screw up, get into tail screw, the whole tooth silk pole mainly.

120. "Overhung" conduit box allows mounting to the rear accessory flange of larger motors without mechanical interference.

121. But since independently rotating wheels have no turning moment resulting from longitudinal creepage, independently rotating wheels lack guiding ability and can but basically depend on flange to guide.

122. A gland bush flange connected to the bearing cap flange is arranged at the bottom of the open tube shaft.

123. Furthermore a linear equation is derived for determining the neutral axis of wide flange T-beams with comparatively small percentage of reinforcement and small prestressing force.

124. This paper researches the plane stiffness of new composite structure for slab on the lower flange, which is compared with the traditional structure for the slab on the top flange.

125. In order for the flange joint to maintain a gasket seal.

126.

127.

128.

129.

130.

131.

132.

133.

134.

135.

136.

137.

138.

139.

140.

141.

142.

143.

144.

145.

146.

147.

148.

149.

150.

151.

152.

153.

154.

155.

156.

157.

158.

159.

160.

161.

162.

163.

164.

165.

166.

167.

168.

169.

170.

171.

172.

173.

174.

175.

176.