1. Electroplating, magnesium alloy, and other anodic treatment agents.

2. Other anodic films conduct electrons.

3. The anodic oxidation of lead sulphate is well known.

4. The growing proceeding and phase composition of the anodic film on Tin-Antimony alloys in neutral solution at 1.

5. There are an anodic peak and a cathodic peak in the cyclic voltammogram of polythionine. Their peak currents increase with increasing temperature.

6. Higher the temperature, greater the anodic peak current of CV, and PANI film is more electroactive and has a higher electrochemistry ability of repositing energy on corresponding potential.

7. Well-ordered large-pore anodic aluminum oxide membranes were one-step prepared in water-deficient electrolytes using ethanol as main solvent.

8. The preparation of porous anodic alumina film is studied with sulfuric acid as electrolyte and the morphology of the film is characterized by field-emission scanning electron microscope(FE-SEM).

9. By means of non-linear regression method calculated the anodic kinetics parameters. The mechanism of anode reaction and its rate-determining step were discussed.

10. Soft lithography and anodic process were combined to prepare the pattern porous alumina successfully.

11. Furthermore, the emulsion technology used in anodic cyanation is discussed in detail.

12. The anodic polarization current increases rapidly and the anodic process is out of control because of plenty dis-adsorption of corrosion inhibitors when anodic polarization voltage exceeds-0.45V.

13. Magnesium tank saver - provides anodic protection against corrosion of the tank due to electrolysis.

14. This article discussed anodic oxidation mechanism of aluminium plate by means of electrode potential, Nernst equation, overpotential and so on.

15. Some technical problems concerning the analysis of barrier anodic films on aluminium by AES were discussed.

16. This paper introduces an improved porcelainous anodic oxidation and analyzes the effect of different process parameters on quality of oxide films.

17. The addition of SO2 promoted the anodic process of corrosion of X70 steel, increasing of the acidity and temperature of the solution promoted the cathodic process mostly.

18. The choice of anodic materials depends on high efficiency, reliability and electrocatalysis for the electrochemical destruction of organic compounds.

19. The influence of temperature on the anodic process of seawater electrolysis are discussed.

20. Anodic voltage - drop of prebaked anode aluminum electrolysis cell was around seized of 10 % of cell voltage.

21. Trace metal ions in the solution are thereby reduced and plated on to the anodic electrode.

22. The potentiostat is one of the principal instruments used to control an anodic dissolution process accurately in electrochemical experiments.

23. Results showed that both types of imidazoline derivative inhibitors were mix-type inhibitors which mainly inhibited anodic processes.

24. The results showed that the coating grew by the following steps : the stage of anodic deposition, micro-arc oxidation and local arc light.

25. It comes to the conclusion that the corrosion fatigue fracture of LC4 aluminum alloy is the results of combined action of anodic dissolution, hydrogen embitterment (HE) and mechanical damage.

26. Diethylene Triamine Penta Methylene Phosphonic Acid (DTPMP) is applied to hydration resistance treatment of anodic oxide films, which treating method is same as that of ATMP.

27. The results indicate that sodium benzoate, ammonium benzoate, cinnamic acid inhibited anodic process significantly.sentencedict .com

28. The fracture modes were ductile dimpled tearing fracture for the aluminum brass at the corrosion potential while intergranular for the aluminum bronze at various anodic potentials.

29. Addition of heavy metal thallium, bismuth, silver, mercury and lead will greatly widen potential zone of activation dissolution of gold and significantly improve the anodic current density.

30. Sn naowire arrays were AC electrodeposited into the pores of anodic aluminum oxide template.

31. Electrochemical experiments approve that the corrosion rust layer in atmosphere prevents the electrochemical anodic process evidently.

32. The cathodic and anodic process of mild steel was studied in the simulating solution within pits.

33. Copper and zinc in blood in 36 normal people could be determined simutaneously by anodic stripping of oscillopolarography with a carbon paste electrode.

34. Presenting the technological condition and application range for lower voltage hard anodic oxidation.

35. The influence of halide ions on anodic process of iron in alkaline solutions has been studied by electrochemical techniques.

36. In this paper, benzidine, C-tolidine and benzidine hydrochloride are determined by anodic differential pulse voltammetry on a glassy-carbon electrode.

37. The equivalent circuit models corresponding to these anodic alumina membranes were established.

38. The results showed that the anodic overpotential decreased with increasing of Bi content in the alloy.

39. Encouraging results have also been obtained with the anodic plasma - oxidation technique for nonrecessed oxides.

40. Silicon, semiconductor material , can form different configurations at anodic bias etching system in the HF electrolyte.

41. Anodic phosphor bronze is commercially produced by upward casting process with the technology introduced.

42. Indirect determination of allici by anodic stripping voltammetry ( ASV ) in garlic sample was described.

43. The metal with a lower potential in the galvanic cell will be anodic and will corrode.

44. A preparation method of anodic aluminum oxide film with thick barrier layer is provided[], which belongs to the field of material technology.

45. In addition, an insulation layer is formed for covering the electronic emission sources and the anodic treatment layer.

46. To reduce the production costs and simultaneously obtain high production quality, a flexible microassembly system for automated anodic bonding of MEMS sensors is developed.

47. Encouraging results have also been obtained anodic plasma - oxidation technique for non recessed oxides.

48. Indirect electrooxidation of toluene to benzaldehyde simultaneously in the cathodic and anodic compartment of a cell has been studied.

49. Recent and new techniques used in anodic oxidation methyl of benzene rings are also extensively discussed.

50. The anodic oxidation and electrolytic colouring of 6063 aluminum alloy containing rare earths in solutions of sulfuric acid and stannous sulfate are studied.

51. Microarc oxidation is a new developed anodic oxidation technique in recent years in China.

52. Anodic aluminum oxide ( AAO ) was fabricated on aluminum in acid electrolytes at constant voltage.

53. The sketch map of change on microstructure of anodic oxidation film during the reaming process and the process parameters for obtaining the multi-coloring by blocking layer adjusting were presented.

54. The importance of surface cleaning before replating, reverse electro-etching(anodic treatment) as well as low-voltage and small-current plating, and some problems needing attention were emphasized.

55. Anodic oxide membranes with nano-nano hierarchical structures are fabricated on the surface of pure alumina by two-step anodization.

56. TA2 pure titanium implant material could possess abundant color by anodic oxidation in sodium glucoheptonate electrolyte, which would enhance its decoration and functionality.

57. CO2 in carbonic acid promotes the cathodic process and inhibits the anodic process of UNS G10190 steel.

57. is a sentence dictionary, on which you can find nice sentences for a large number of words.

58. Apply the pulse power electrolysis to eliminate aluminum anodic passive films in the process of electrocoagulation .

59. The anodic overvoltage of neodymium electrolysis was determined by slow scanning oscillogram.

60. Continuous extraction of Essential oil and Gingerols from ging er by anodic stripping voltammetry and a new method for quantitative determination of Gingerol extracted were studied in this paper.

61. Also the process of hydrogen evolution during cathodic half cycle played a dual role (i. e. promotion and impediment) in anodic pitting during AC etching of aluminum.

62. Anodic bonding applied in the joining of solid electrolyte borosilicate glass and silicon is achieved with bonding machine in the assistance of static electric field.

63. A novel technique - anodic vacuum arc coating for thin film deposition is reviewed in this paper.

64. The coloring process can be formed a complete set with anodic electrophoretic coating technology aluminium.

65. The corrosion inhibitor BHD-Z mainly inhibits the anodic process and belongs to the class of anodic-type inhibitors.

66. It was found that Ce may improve the anodic corrosion properties of the alloy, but La and misch metal may make its properties worse.

67. The invention relates to a friction welded anodic aluminum guide-bar unit and a friction welder thereof.

68. Each tank shall be furnished with an internal anode for anodic protection.

69. Firstly, the electrochemical behavior of anodic aluminium film formed on neutral solution is investigated.

70. Pipeline adopted constant cell voltage anodic protection technique, cathodes are set in pipeline upright, potential distributed uniformly.

71. This paper reported an anodic differential pulse voltammetric determination of estrogens.

72. The lamp cup is made from Germany-original anodic alumian of high purity, featuring long life and durability.

73. An anodic dissolution at potential of -550mV(vs. SCE) is applied to investigate the grooving corrosion sensitivity of J55 steel oil well casing in electric resistance welding(ERW) zone.

74. The portion of CO in the gases increases with temperature, but decreases with anodic current density.

75. It suppresses the electrochemical cathodic and anodic process of steel, decreases passive region current density of anodic process, and so acts as a mixing type inhibitor in concrete.

76. It also shows that the performances of anodic aluminum oxide films, (in twin liquor setup ferrous potassium cyanide and copper sulphate) are good.

77. Highly ordered porous anodic alumina template was prepared by twice anodic oxidation in acidulous electrolyte, and its morphology was observed by metallographic microscopy.

78. Lead and mercury were deposited in-situ with chronoamperometry and stripped using square wave anodic stripping voltammetry.

79. Porous alumina membranes with two - dimensional ordered arrangement have been prepared by the anodic oxidation.

80. The anodic process of copper in concentrated NaOH solutions was studied by potential slow scan and galvanostatic methods, and angle dependent X-ray photoelectron spectroscopy analysis.

81. In conclusion, surficial morphology and specific area of CF weren't influenced by anodic current density.

82. Bourgeon, location distribution and growth of porosity anodic oxide film affected by the formed air bubble were brought forward.

83. The creep rate was increased while the yield strength was reduced by anodic dissolution.

84. To improve the anti - corrosion performance of electro coating inorganic inhibitors are applied in an anodic electrophoretic - coating.

85. Finally, a model of anodic oxidation of PAN HM carbon fiber were proposed.

86. The patterned anodic aluminum oxide ( AAO ) template was fabricated by UV photolithography.

87. The physical model for anodic bonding is constructed base on valence bond theory, and the essence relationship between bond result and circuit character is obtained.

87. is a sentence dictionary, on which you can find nice sentences for a large number of words.

88. In acidic electrolyte , the porous anodic aluminium oxide ( AAO ) template was obtained using anodic oxidation.

89. The surface microstructure of anodic tantalum core was analyzed by scanning electron microscope(SEM), and then analyzed the failure mechanism of wet tantalum capacitor.

90. Figure 2 Anodic polarization curves of chrome steel samples in simulative mineral slurry.

91. The effect of the experimental parameters on the interfacial bonding strength was investigated, as well as the influences of the anodic oxidation state on the titanium substrate surface appearance.

92. Anionic electrodeposit coating line for aluminum shell of solar water heater is introduced. Anodic oxidation, anodizing electrolytic coloring and anionic electrodeposit coating process are focused.

93. Adopt 304 stainless steel and alloy which is deal ed with anodic oxidation.

94. The different degradation pathways of o-chlorophenol were revealed in the anodic oxidation and the cathodic reduction through chromatographic analysis.