(1) The car's gears aren't meshing properly.

(2) Meshing the research and marketing operations will be Mr. Furlaud's job.

(3) While practical issues of meshing motherhood with modern life loom large, the greatest challenges are still psychological.

(4) Meshing Celtic folk with punk, the Pogues' music is sweet, strong and exciting.

(5) Meshing analysis of face gear has two parts.

(6) Worn gear wheel and deep meshing of gears.

(7) Meshing spur gears must have the same diametral pitch.

(8) On radiosity meshing Parameters, enabled Global Subdivision Settings.

(9) Meshing gears must have the same pressure angles.

(10) Based on the pitch meshing theory of the worm drive, a new structure of the cylinder worm drive-the double pitch point and double side-placed worm gear drive is proposed in this paper.

(11) With the steering gear meshing steering rack level arrangement, the both sides with change the steering knuckle tie rod through a ball place to be connected.

(12) The real-time meshing stiffness of arced planet gear and the meshing stiffness of involute planet gear have mainly been analyzed.

(13) However, the chordal action and the meshing impact effect of roller chain drive damage the synchronization and uniformity of transmission.

(14) By combining the meshing principle with the actual working condition between the sprocket wheel and the pallet cars, the basic tooth profile curve was obtained.

(15) The processing of gear hob used the meshing straight teeth and helical cylindrical gears of cutting tools.

(16) Analysis shows that the distribution of meshing points is a function of the axial circular pitch, the axial space of two meshing points on a tooth and the effective width of the gear.

(17) While apply the technique of meshing clearance to the back push type sabot and front push type sabot, we have provided a transient dynamic analysis of this method using ANSYS.

(18) Gears using two gear teeth meshing with each other to transmit power and motion of the mechanical transmission, with the main, driven wheel gear direct, transmit motion and power of the device.

(19) Based on the meshing and geometry relationship between the profiles.

(20) It'should be said GALLUS machine meshing gear teeth, there was a small staves of opportunities.

(21) In addition, the meshing of two convex teeth make the relative radius of curvature of the contacting point shorter.

(22) Based on meshing theory, a formula is derived for calculating index error of worm-type cam follower(i. e. Tindex plate)under influence of actual worm-type cam profile and dimensions.

(23) There is something wrong with this machine, the wheels aren't meshing properly with each other.

(24) This paper introduces some methods of how to adjust bearing preload, meshing prints and gear backlash of the Main Reducer in driving axle assembling.

(25) If helix angle is equal to or slightly smaller than the angle which makes two meshing boundary lines coincide with each other, preferable meshing performance is obtained.

(26) To enhance the bearing capacity of NGW gear drive, the optimal design has carried on the outside meshing gear drive dislodgement parameter.

(27) From the point of view of the contact line and the meshing limit line, the contact performance of double enveloping TI (Torioidal Involute) worm gearing is analysed.

(28) Diverter: By the wheel, the wheel steering axle, changes meshing to pay ( diverter ) to be composed.

(29) The movable teeth transmission can turns a gear wheel into multi - teeth meshing transmission which radial sports.

(30) Then the formulae for calculating machine tool adjustment parameters on hobbing are derived by the study of spatial meshing principle among hobbing cutter, imaginary generating rack and gear.

(1) There is something wrong with this machine, the wheels aren't meshing properly with each other.

(31) Analyze interface condition of the two contact surfaces, secondary contact phenomenon, existence of meshing boundary line and undercut boundary line.

(32) In order to reduce the probability of failure, the influence of a gearwheel with staggering tooth on the meshing stiffness of gear with double circular arc was investigated.

(33) First of all, the excitations of gearing including stiffness excitation, error excitation and meshing shock excitation are simulated by finite element method and error equivalent method.

(34) The ways to reduce the fatigue wear-off due to meshing teeth faces under different working conditions are found out via the mathematical model describing the physical process of tooth face wear-off.

(35) When the meshing efficiency of closed epicyclic gear trains is computed, the method of drive-ratio is used often.

(36) Gear manufacturing error will directly affect the meshing of gears, thereby affecting the smooth movement of.

(37) Within the range of machining, if the helix angle adopts a bigger value, it may improve the meshing performance and develop the advantages of double enveloping TI worm gearing.

(38) In this paper, a new method to measure meshing composite deflections of loaded cylindrical involute helical gear by using high precision clinometer is presented.

(39) According to the theory of gearing, equation of the meshing line can be deduced from the tooth profile of basic rack.

(40) A brick element re - meshing technique was presented for shape - metal rolling process.

(41) The character of special master gear wear for gear meshing and seperating technique is studied in this paper.

(42) PPTA (polyphenylene terephthalamide) pulp was prepared by semi-continuous direct polycondensation using a co-current rotating and meshing twin screw extruder as main reactor.

(43) Threshold rattling speed not only depends upon the frequency and amplitude of the errors of a gear pair, but also time-varying meshing stiffness and their combination frequency.

(44) Meshing parameters in harmonic gear drive are optimized in the paper.

(45) In addition, when roller gear when no meshing clearance between generates this kind of gear poles.

(46) There were some beautiful harmonies meshing behind the dreamy bass line.

(47) These formulae are suitable for any contacting point of tooth surface meshing.

(48) The line of contact is longer and the contact ratio is bigger, the meshing stationarity is good.

(49) According to Hertzian stress, the stiffness during the contact of a pair of gear teeth is derived, and the variation of stiffness is introduced into the rack-and-pinion meshing model.

(50) In the meshing of the German constitution with European law, proportionality provides a lubricant.

(51) Three meshing points the tooth surface were designed according to the contact pattern and transmission errors.

(52) It is an important but difficult job to compute the transmission ratio and the meshing efficiency of epicyclic gear trains.

(53) Toothed ball meshing, compact structure, rational design,[sentencedict .com] achieving the mechanical transmission precision requirements.

(54) This paper also presents an iterative method to find the initial gap between meshing local conjugate teeth.

(55) This paper makes a meshing analysis about the spiroid gearing. Using the method of equivalent worm gearing, the assembly condition of Archimedes spiroid gears has been obtained.

(56) Meshing to minish analysis error is a concerned problem in FEA.

(57) A new type of arc cycloidal internal meshing rotary pump was studied.

(58) A new method is proposed for analysing the meshing force exerted between the pin teeth and the cycloidal gear teeth in the course of the cycloidal pin gear epicyclic transmission.

(59) The modification of gear is a principal method for improving performance meshing.

(60) It is a general issue that the meshing force between the gears in the rolling mill herringbone gear stand is not sufficient.

(61) The common gear tooth profile curve launches after neighborhood higher order step taylor's series, can discover the tooth face meshing point neighborhood gap is 2 step infinitely greats.

(62) An investigation on the meshing characteristics of face gear drives is made in this paper.

(63) The meshing of her public and private lives placed near schizoid demands on Thatcher.

(64) The principle of transmission, basic structure, transmission ratio, meshing parameters and transmission efficiency of this kind of epicyclic transmission were discussed and analyzed in this paper.

(65) From all accounts, the match between Hermann and Pauline was a happy one, with her strong personality meshing "in complete harmony" with her husband's passivity.

(66) Meshing the angry nihilism of punk and heavy metal with the synthetic sheen of techno.

(67) The 3D grinding and meshing model of Y7125 gear grinder is established, this is based on feature and parameter.

(68) In this paper, the meshing theory of rack and pinion steering gear with variable ratio is studied systematically.

(69) So it is necessary to perform some processing on geometric model before meshing.

(70) Secondly, the meshing path of the contact point of SCMW is deduced based on the meshing function of space curve and the space coordinate transformation.

(71) Working depth: the distance that a tooth from a meshing gear extends into the tooth space.

(72) The meshing characteristic of the cycloidal type gear pump is analyzed theoretically and calculated; furthermore, it is compared with that of the involute.

(73) MARC is chosen as the FEA software. And the key technologies, such as the definition of contact and friction, meshing problem, and convergence criterion have been discussed.

(74) The dual meshing silent chain mechanism is designed, which comprises the dual meshing silent chain and new kind of sprockets.

(75) A new rolling type of spherical enveloping worm gearing with point meshing is proposed.

(76) This paper discusses a new meshing scheme about armor-piercing core and sabot of long rod AP, which adopts the structure of variational tooth clearance.

(77) If the normal section in the center of the tooth line is taken as a tooth measuring and design section, when spline hob is designed in a plane meshing, the tooth profile error is minimum.

(78) Based on the conjugate surface theory and meshing principle, this dissertation establishes the transmission theory and analysis strategy of the crown gear coupling.

(79) Exact modeling of gear teeth is based on meshing theory.

(80) However, because of the chordal action and the meshing impact effect, conventional roller chain drive was not suitable for high-speed transmission.

(81) The results show that it is feasible to apply interval meshing technology to composite sabot of high power armor piercing projectiles.

(82) Specifies meshing parameters for automatic ( smart ) element sizing .

(83) This essay mainly explains that the involutes of grind gear on the bottom of the tooth space is not deep enough is caused by meshing interference.

(84) X to exercise dual-motor dual rack and pinion drive technology, eliminating the pros and cons to the meshing clearance.

(85) Fully automatic meshing, with optional fine - grained user control for specific components.

(86) The special meshing of convex and concave teeth profile makes the relative radius of curvature of the contacting point longer.

(87) It is difficult and complicated to analyze the power-flow of the complex epicyclic gear trains and compute their transmission ratio and meshing efficiency.

(88) Studying the relational problems of numerical simulation of welding process, such as the choice of welding heat models, meshing girding etc.

(89) The meshing force of the gearbox was computed by writing the sub-routing of contact force and the shifting process was realized through script control.

(90) Because when the frequency of close to the meshing of gears susceptible to the natural resonance frequency.

(91) The error correction model of tooth surface was established by machine tool adjustment parameters and meshing principle.

(92) The spring presses through the briquetting the rack depending in the gear, guarantees ceaseless meshing.

(93) The back bar itself was sourced from a historic 1920′s Hook's Drug Store, meshing beautifully with the Tap Room's ambiance.

(94) Logic statistical analysis predictive model is established, and through homogeneous meshing, the space quantitative evaluation on goe-hazards susceptivity is realized.

(95) Worm pairs of planar envelope hourglass have many advanced meshing properties and potential applications.

(96) The shim chosen by the measuring machine can achieve the pinion and ring gear's meshing spot request.

(97) The time-variable stiffness is acquired by 3D finite element contact procedure, while the exciting force caused by meshing shock is obtained by 3D dynamic contact finite element mixed formula.

(98) This paper introduces three models the "Bottle Gourd" model, the "Twin tower" model and the "meshing" model, aiming to enhance the effect of ideological and political education.

(99) During the transmission of the involute gear in mesh, the gear engagement stiffness, the load, the sliding velocity and the curvature are varying with the meshing line of the gear teeth.

(99) try its best to collect and build good sentences.

(100) And analyze the contact strength of the roller and sprocket wheel while in meshing process.

(101) So the meshing clearance technique is a feasible method for the sabot design with the materials of low density and low intensity.

(102) The governing equation of a gear system with time - varying meshing stiffness is established.

(103) Meshing method is one of the key factors of meshing direction feature.

(104) Designing of external gear shaper cutter with large tip relief angle can improve the meshing quality.

(105) A principle of self - position meshing track for conveyer chain has been proposed.

(106) Tooth face equation of producing gear is derived based on spatial meshing theory and coordinate relation.

(107) To improve tooth strength and make tooth grinding implement for face gear, a new generating method of face gear drive has been proposed, and the meshing characteristics are investigated.