1. Statistical process control is a technology that uses statistics to monitor the steps in a process, often a manufacturing process.

2. Process control has reams of output data that need organizing and interpreting.

3. Process control nets will need to respond to changes in the process.

4. The use of statistical process control by world class manufacturing companies shows how non-financial information can be used to improve performance.

5. In industry and science, process control and equipment monitoring can be far more reliable and effective using a micro.

6. Two 16-year-old process control trainees have been sponsored for a two-year college-based training course in Edinburgh.

7. They understood statistical process control, total quality customer service, reengineering, and the economics and finance of film manufacturing.

8. The flowchart, main equipment and process control is review.

9. Collect and analyze statistical process control data.

10. Record the process control data of every sterilization lot.

11. Every process from a process control block (PCB) said.

12. New electronic throttle device, achieve null process control.

13. With the development of Process Control Technology, the real-time control system is widely utilized in various fields of automation controlling.

14. In a steam power plant, after enhancement of process control and administration, medium-loss at boiler unit is obviously reduced; scar-removing ratio is reduced from 6.

15. Industrial process control software and hardware growth should not be underestimated .

16. Through the experiment of application COMI converter steel-making process control dust, results showed that: increasing the proportion of CO2 injection, converter dust continued to lower core loss.

17. Process control of bonderizing was discussed from bonderizing principle in this paper.

18. This procedure does not allow for adaptability, essential for applications such as process control, which must change as conditions fluctuate.

19. The curriculum expands to include hydraulics, basic pneumatics, electronics, and statistical process control.

20. Future steps could include moving from process monitoring to process control.

21. This approach also provides a direct illustration of one major application of microprocessors in process control.

22. An important element of this is to have all key variables in the manufacture of these raw materials under process control.

23. The two companies reckon this combination will appeal to developers of process control systems using real-time monitoring.

24. Recent studies of intermittent turbulence within chaotic systems are being applied to process control with considerable success.

25. Every batch produced is closely monitored by quality and process control departments.

26. The reheating furnace process computer system goals are mainly dynamic production process control, process operation records tracking, and production process optimization with metallurgy model.

26. try its best to gather and create good sentences.

27. Second, optical broadband monitoring is combined with additional quartz crystal sensors to realize a hybrid process control for improving layer thickness accuracy.

28. The main functions, hardware component, network configuration and software design idea of process control level, basic automation level and field execution level for this control system are described.

29. A digital pulse generator for a silicon controlled rectifier and digital PID algorithm for some industrial process control are realized by the microcontroller.

30. The cold continuous rolling mill's simulation research has important significance for both optimizing process control model and improving processing characteristics.

31. Chengdu 8010 is the distributed microcomputer process control system based on single board computer.

32. So these years configuration software is widely applied to industrial automation and industrial process control projects.

33. Statistical process control(SPC) technique is used to improve quality and reliability of microelectronic products, and monitor production conditions of wire bonding process.

34. Concepts from industrial process control are applied to the field of systems development in this paper.

35. The abnormal quality model has been set up on the base of the process control computer system so as to increase the quality control and the management over the slab continous casting.

36. In process control system for DC arc furnace steelmaking, modelling is a key part.

37. Design and realization of RH refining process control model system are introduced.

38. Honeywell also offers solutions for industrial and cyber security, advanced process control and optimization, process design simulation and operator training simulation.

39. ME is the original mechanical Factory and Ministry of Chemical Industry of the fixed-point process control instrumentation manufacturer.

40. A new technology in process control field of OPC technology, Object Linking and Embedding (OLE) for process control is introduced in this article.

41. Programmable computer control system and process control at the same time.

42. A liquid level process control system is designed for the purpose of control algorithm research in this paper, including liquid level tank device, communication hardware and control software.

43. As an optimization means , advanced process control should be popularized in other units of petroleum refinery.

44. Product and process control: SPC control, pre shipment sample audit and manufacturing process audit.

45. The process control conditions were optimized for PP particle size distribution equality.

46. A new method of gas chromatographic analyses in the production of chloroacetic acid for process control using diazomethane as esterification agent is studied.

47. The uses of barium sulphate precipitated, the specification of the original material, the principle of production, process control point, product quantity are introduced.

48. In the Quality Control System of auto industry, the process control chart has been regarded as an important control instrument.

49. Because of the realtime requirement, the multiprocess concurrent running concept is normally utilized inthe application software design for the process control level's computer.

50. Plasma Physics of CAS, Doctor , Major in: Computer application and process control.

51. Designed the communication interface between the analytical system and process control computer with digital I/O card, realized the real-time acquisition of strip steel given information.

52. We will consistently observe standard work processes, and guarantee topnotch translation quality through rigorous process control.

53. Then describe the communication module, data processing and process control module and different algorithm in details.

54. The paper discussed a chemical engineering process control device which has been used in training and research.

55. R-DOUBLE BAR : The average of the R-Bars, used in statistical process control.

56. The application, influence factors and process control of four kinds of heat treatment methods including tempering, carburizing, nitriding and induction quenching are analyzed.

56. is a sentence dictionary, on which you can find excellent sentences for a large number of words.

57. So, in the design of the control system of process control to comprehensive consideration of the requirements, cost factors, choose the proper control motors.

58. The gas nitriding process control systems are designed to provide a fully automatic operation.

59. The Kernel Executive which is the essential part of a distributed operating system for DRIPS, a real-time process control system, is discussed in this paper.

60. This paper put forward a new parameter detection and undervoltage control system in underbalance drilling on the basis of wireless communication and process control theory.

61. The application of soft sensor and advanced process control technology in aromatics disproportionation unit is introduced.

62. Objective:To develop a laboratory information system(LIS)that satisfies the management and process control of microbiologic analysis.

63. The system operator has three main functions : transfer (inter-regional and international transit), process control and balance of the electric power system.

64. Roofing materials ultimately feed control system for automatic anti-sway control, to move materials, both stable and fast the process control requirements.

65. Considering the different of PTA grain size, using different process control emphasis and depressurize operation, the problem of high DEG content was solved.

66. OPC applies OLE (Object Linking and Embedding) technology into Industry Process Control Fields, and provides a kind of standard data access method.

67. Presents the principle of statistics process control, the judgement of state in statistical control for a process by means of control chart, and the analyses and improves process capability.

68. A compression approach of industrial flow diagram was proposed paper against the process control properties.

69. However, many business systems developed the process control module bundled with itself, in this way, the process control module is difficult to be reused in other business systems.

70. In this paper, how to improve quality of UHT milk product were mainly discussed from raw milk, process control and end-product distribution points of view.

71. In accordance with the existing problems in process control systems using modems for serial asynchronous data communication, effective handling measures are stated.

72. An electronic process control panel with I/O boards, an industrial computer and a color monitor.

73. This work demonstrates the efficient method of process control based on the batch raw sugar crystalliser model to improve the crystal rate and shorten the crystal time.

74. A locally make windows-based process control software was used to develop the user interface of the control system.

75. Each process is a process control block ( PCB ) said.

76. Based on the optimal closed-loop transfer function, a new design method of optimal controller is proposed; which can be widely used to a process control sys-tem and for instrumental calibration.

77. However, many problems remains in the project planning and scheduling and process control in Aerospace Model Engineering project management of China.

78. The protection and rapid recovery of application software system for process control in chemical production were introduced.

79. It uses heating forms such as steam, liquefied gas, natural gas and electromagnet, uses electromagnet protection standard, finishes process control integral control, and filling in domestic gap.

80. The computer simulation result shows that this algorithm is simple and useful, and can be available for computer process control system to improve the control character.

81. The start-stop control combined process control, regulation control and coordination control so as to realize complicated process control.

82. An integrated RH process control model and its industrial application are introduced.

83. The distributed control system ( DCS ) is a main channel for realizing modern industrial process control.

84. The paper discusses the resource management, interprocessor communication, process control, state monitor and error processing, which are important technical problems for RCDOS.

85. They consist of:An electronic process control panel with I/O boards, an industrial computer and a color monitor.

86. The factors and nature reasons of influencing the quality of alkylphenol were described and the control methods were discussed also, it is useful for the producing process control of the product.

86. is a sentence dictionary, on which you can find excellent sentences for a large number of words.

87. In addition, a software package with controller performance evaluation, parameters tuning and optimiazaion designed for a typical process control loop.

88. Proteus simulation diagram with the use of single - chip crystal display process control, crystal models for 1602.

89. In particular, we adopt the "crosstie" layout to get rid of the macro variation coming from process control and demonstrate that the device variation actually varies as the device distance increases.

90. The professional terminology and model of batch process control standard ISA S88 was introduced. Explained in detail how the batch control system realized the batch execution.

91. China's legislation reform should be directed on a change from GDP-orientation to focus on sustainable development. The reform perception should change from end control to process control.

92. A normal process has a number of data structures associated with it in the kernel, including a stack and process control block (PCB).

93. The config file modules solves the problem of unclear process control structure and improves real time response, it makes process more clear, better supports controlling of navigation.

94. This thesis elaborating the system design of the distant process control system in details. This system can be divided into two modules, the distant control module and process control modules.

95. Design process flow diagram. Support PFMEA. Support process control plan. Take charge of operation instruction.

96. It introduces process control point of chrome corundum permeable brick and its application in smelting ferroalloys.

97. But, lots of equipment have only RS232 serial interface in traditional industrial process control area, such is data collector, executive component and controller.

98. The technology of LP plate is explained , and process control system is given.

99. Factors influencing the particle size of Glauber′s salt is analyzed and the optimum process control condition is proposed.

100. Presents the basic principle and function of the new generation of comprehensive electric protector, as well as the whole process control of HP electric motor switch-on with it.

101. Hungary has become a regional superpower in certain segments of software development, including the market of process control software and the production of game programs.

102. The lifecycle of the process control model has been illustrated with an application example of the converter process control model at Baosteel.

103. A process control method is adopted to analyze the control over nonconformity products in this paper.

104. Schedule generation model is regarded as one of the most important models for plate rolling process control computer systems.

105. Some reviews on system architecture, finishing roll controlalgorithms and process control softwares are presented.

106. Design 、 implement and manage process control systems, power reticulation systems and switching techniques.

107. Polymer process control is limited by a lack of observability and controllability of the state of the polymer melt.

108. This algorithm overcomes the main barrier of application of equal load function method to rolling schedule and can be applied to online process control system.

109. This paper introduces STD BUS process control system with 8031 single computer as its central processor.

110. After the coupled process control model was developed, a feedback decoupling controller was proposed to decouple the model.

111. Process control of recombinant Escherichia fed - batch culture should be optimized.

112. Process control block can contain the following information: process name, priority number, need to run time, CPU time is used, the process state and so on.

113. These results are important both for the choice of initial blank and forming process control.

114. Modern process control system is also changing from DCS to FCS.

115. The process, main equipment, process control and product analysis are presented.

116. ESPC model is introduced to prevent or self-heal performance exception. ESPC enhances the metrics program of Statistical Process Control(SPC).

116. is a sentence dictionary, on which you can find excellent sentences for a large number of words.

117. The influence of explosive factor on explosion process control in bagasse explosion pulping was studied.

118. In order to meet the requirement of some key projects of Baosteel s "Eleventh Five" Plan, the company has independently developed the L2 process control computer system for its 5 production lines.

119. For better detection to the thermal generating set equipment fault, using the multivariate statistical process control, a more precise equipment parameter model is obtained.

120. This paer puts forward a novel approach of designing fuzzy self-tuning regulator which is suitable for process control in boiler-turbine unit.

121. Clarify the analysis of after the event of mode of the choice mode of the project and the constituent structure mode that the project manages, item process control and project evaluates a model.

122. The research and application of process control model on LD converters in Baosteel are presented.

123. By using this method and the operation data collected by the process control computer, the heat transfer coefficients will be achieved in real time.

124. The distributed control system ( DCS ) has been widely used in modern industrial process control.

125. The author constructs frame model, process control model and information integrated model in iron and steel industry.

126. The characteristic of the node is very fit for building automation and industry process control because the fan-out and fan-in are very flexible.

127. The auto control of computer figuration realizes the process control of human - machine interface.

128. Process control block may contain the following information : process, and priority number, the need to run time, has taken the CPU time, the process of the state and so on.

129. It is made up of distributing network (INFI NET), process control unit(PCU), operator interface station (WSA), engineering work station (EWS) and computer interface unit (CIU).

130. Finally a small process control system, in which the core device was multi protocol converter and the controlled object was a small boiler, was constructed.

131. Temperature is a very popular parameter of pyrology in flow industry, so temperature control is an emphases of process control.

132. The number of processor scheduling priority scheduling algorithm, each process has a process control block (PCB) said.

133. The article elaborated on grating monochromator process control system design, development language environment and software functions.

134. The paper introduces a technique for the on-line estimation of oxygen uptake rate (OUR), using readily available sensors and a process control computer presented.

135. It was based on the OLE technology standard and designed for the information alteration of the process control software .

136. The functionality of the PLC has evolved over the years to include sequential relay control, motion control, process control, distributed control systems and networking.

137. The RH process control model includes static decarburization model, dynamic decarburization model, temperature model, alloy minimum cost model, and composition prediction model.

138. Distributed Control System ( DCS ) is widely used in modern industrial process control field.

139. In - process control data is recorded and maintained to quantify rMMS for critical processes.

140. Structure and configuration of process control computer system for converter in the Second Steelmaking Plant of Baosteel Branch are introduced.

141. This paper is mainly about the application of DDC(Direct Digital Control)process control in polymerizer forced condensation and the results.

142. Edge drop control is a key process control for silicon steel production.

143. Furthermore, the modeling technique based on the Logistics Systems Process Control model (LSPC-model) is suggested, and thus a new practical approach is given for the logistics systems planning.

144. Process control technology with systems designed for ore benefaction , compressor intakes and cement kilns are prone to corrosion.

145. Accurate prediction of slab heating time in-furnace in process control computer system of walking beam furnace for hot rolling is studied.

146. Application, process control and solution of stored - energy welder in microelectronic packaging field are introduced.

146. Wish you will love and make progress everyday!

147. Our goal at SinaOptical Corp. is to meet the comprehensive needs of our customers through market-oriented product engineering, manufacturing process control, and innovative products offering.

148. PID controllers have been widely applied in modern industrial process control.

149. The function assignment of automatic system, mathematic model for process control and intelligent control method used in process control system of RH equipment were reviewed and discussed.

150. All of the identify special characteristics shall identify process control documents including those process steps that affect special characteristics.

151. This paper demonstrates the efficient method of process control based on the batch raw sugar crystallization mechanism model to improve the crystal rate , shorten the crystal time and the wastage.

152. A fast conditional breakpoint is considered to be an essential process control capability of advanced high-performance parallel debuggers.

153. The management process control system (MPCS) presented in this paper applies the ideology of workflow to the lower management supporting layer.

154. The gas nitriding process control systems are designed to provide a fully automatic operation. The entire nitriding process is executed in an automatic, self-adjusting and operator independent manner.

155. The Manufacturing Department is responsible to formulate the critical (special) process control card, to control the process, and to analyze the process quality.

156. Process simulation and process control are two important tools to improve performances in the alumina plants.

157. Process control block may contain the following information : process, and priority number, the arrival time, the running time, CPU time used, the process of the state and so on.

158. We will discuss the techniques or integrating data management with process control in the application system of FujianBighway Toll Gate Network Management System in this paper.

159. A method for velocity variation with variable frequency(VVVF) of an induction motor was developed in an industrial process control computer measuring system of automobile pump.

160. This paper presents an integration granularity based integration idea for process control system.sentence dictionary

161. In the industrial process control, there are different time - delays for controlled objects.

162. The control logic relation of all the station equipments can be divided into two stages. The bottom is a direct process control stage and the top is a compute supervisory control stage.

163. As the system controls is a typical process control and most steps are controlled in time order, so PLC-based distributed control method is suitable.

164. Kocour Company offers a complete selection of Hull Cells, accessories and related equipment to enable the plater to effectively use this plating process control method.

165. The method presented in the paper could provide references for enterprises' environment cost control through cost analysis, total process control based on environment cost affirming and cost account.

166. Welding control device adopts microcomputer for process control, arc striking, welding, arc extinguishing control, auto arc voltage control and auto tracking of welding seams.

167. While most of them could be defined as sections of existing RUP artifacts, they are kept separate to support auditable process control.

168. It is a combined outcome of calculation control information management, communication and pictorial display technology. It is a modernized equipment for process control and information management.

169. This thesis on 165MN press installation project quality, schedule, risk control, thus pointing out the general process of installing a large press, and the installation of process control.

170. From fossil fuel power generation to nuclear power plants, HOKE offers a full line of fluid process control components.

171. This article lists the theory of cost management; emphasize the focus from cost projections to cost adjustment, the cost of process control, cost accounting, and cost assessment.

172. Return to normal process control methods as described in the Control Plan.