1. He brought his sandwiches in a poly bag.

2. The poly now teaches black magic?

3. But travel agent Lunn Poly substantially increased profitability following major expansion in recent years.

4. The poly gave 15 and 16-year-olds hands-on experience of biochemistry equipment that is too expensive for schools to provide.

5. Professor's research honoured at poly A Guisborough professor's research work has been honoured with a new post at Teesside Polytechnic.

6. The course developed by Newcastle poly which should become Northumbria University next month is a one-stop route to becoming a trainee solicitor.

7. Of course, the staff at the Poly could only be flattered to take part in a state visit.

8. Cotton mix, poly mix, functional item for jacketing .

9. Sound product knowledge lighting, metal, glass, poly ceramic ware.

10. Rubber boot must made of genuine poly urethane.

11. As with many aspects of poly mixology—both in production and consumption--there is no one preferred cocktail recipe.

12. Using both pure poly emitter and heavily doped base, a CMOS-compatible silicon bipolar transistor is implemented, which has low base resistance and is suitable for low temperature operation.

13. On a solgelcoated poly(dimethylsiloxane) (PDMS) capillary column and a conventional PDMS capillary column the probes undecane and fluoranthene were injected and the column efficiency was measured.

14. Poly relatively high real estate liabilities, cash flow is not too idealistic.

15. Nitrated poly L - tyrosine induced higher titre antibodies as compared to the native form.

16. Green dragon to poly Dragon Inn as hill Valley channel, tortuous quiet, the scenery section hidden but beautiful spot.

17. I considered applying to university, but I eventually decided to go to the local poly.

18. The 3' untranslated trailer sequence is 937 nucleotides long and no poly A tail is present indicating internal priming during cDNA synthesis.

18. try its best to collect and build good sentences.

19. The distance was subsequently adopted as the marathon standard and the Poly Marathon was born.

20. The sooner he could phone the mad scientist, and take them to the poly, the better.

21. The informant showed gun crates marked with the names of Norinco and Poly Technologies to an undercover agent.

22. To ensure low leakage current and low dielectric absorption, the feed back capacitor should be made of a suitable dielectric material such as poly styrene, polypropylene, or Teflon.

23. This article shows particular description of Fabricating Soluble Carbon Nanotubes with Ferrocene or Pyrene Containing Poly(1-alkyl)alkynes.

24. OBJECTIVE To review previous research conducted to controlinitial burst in poly ( lactic - co - glycolic acid ) ( PLGA ) microparticle systems.

25. METHODS The metabolic changes of midazolam as the probe drug was studied in vivo, then the inhibition or induction effects of oligo- and poly - saccharide with different structure were estimated.

26. Scanning electron microscope(SEM) images of TGP-H-060 carbon paper and TGP-H-060 carbon paper treated with poly tetra fluoroethylene(PTFE) were gathered.

27. Low - grade hematite, acid, acid and sodium silicate were used to prepare poly - silicic - ferric chloride sulfate ( PSFCS ).

28. A function found on the data of porosity depth or density depth from a given layer in one well or poly wells could be more reliable so that it can figure out a satisfying decompaction thickness.

29. Acid - leaching reactor is the key instrument for preparing poly aluminium chloride ( PAC ) from kaoline.

30. Heat shock protein ( HSP ) is a family of poly - peptdic - proteins with many members.

31. The radiation effect on poly (methyl methacrylate) with different tacticities was studied. It was proposed that chain scission process was in a kinetic equilibrium between scission and recombination.

32. Poly (o-phenylenediamine) is an important type of aromatic amine polymers, which possess new multiple functionalities owing to the amine and secondary amino groups in the polymer chain.

33. Acrylic resin ( ACR ), as an impact modifier for R - PVC, was synthesized by latex interpenetrating poly - mer network technique.

34. The dropwise condensation (DWC) of water vapour has been achieved on the ultra thin poly(HFP) film coated on copper tube surfaces which has been prepared by the technique of plasma polymerization.

35. The solubility, dielectric constant, and dissipation factor of the polymer were improved alter acetyl substitution of poly(p-xylylene).

36. Diaphragm under different liquids were used NBR, chloroprene rubber, fluorine rubber, PTFE, poly ethylene 46.

37. Poly(vinylidene chloride)(PVDC) film has been widely used in meat food packaging.

38. Methods . The implants for partial disc replacements were made of poly ( vinyl alcohol ) hydrogel and rod - shaped.

39. Poly - glycolic acid was provided by Albany Company, USA.

40. Membrane utilized for endotoxin removal namely chitosan affinity membrane was prepared by using Poly(vinylidene fluoride) (PVDF) hollow fiber membrane as support.

41. The ability of amphiphilic block copolymers that consist of polyethylenimine (PEI) and poly(L-lactide) (PLLA) to modulate the delivery of plasmid DNA was evaluated.

42. I got 16 in O level exam. I will study Accountancy in Nan Yang Poly. Mr. Xu, Thank u for teach me Maths and English.

43. A high-molecular-weight poly (phenyl sulfide) (HMWPPS) resin was prepared from sulfur and p-dichlorobenzene in polar organic solvent, with 6-amino-caproic acid and its sodium caproate as catalyst.

44. Physical properties: a single scattering holes, including gum sediments, tylosis rich, catheter and ray pits between small, axial parenchyma as paratracheal type, main poly of, ribbon is also common.

45. Objective To study the effect of anti-mutation of Chinese medicinal herb Poly gala tenui folia willd on T lymphocyte proliferation in spleen.

46. The coating film contained a biocompatible semipermeable material, cellulose acetate, and a water soluble pore-forming agent, poly(ethylene glycol).

47. Objective:To investigate the perioperative nursing intervention of the nasal poly endoscopic surgery for chronic sinusitis or rhinopolypus.

48. In this paper the chemical reaction of poly (vinyl pyridine) was studied and the polyelectrolytes CAPVP containing zwitterion structure units were synthesized.

49. Due to current economic conditions and overcapacity for LDPE in the North American marketplace, Dow Chemical is to close its Poly 2 LDPE plant in Freeport [Sentencedict], Texas.

50. A series of amino acid ester substituted and mixed-substituted polyphosphazenes have been prepared by nucleophilic substitution of poly(dichlorophosphazene) with various amino acid esters .

51. The synthesis of benzyl chloroformate was studied And its applications in poly peptide synthesis was introduced.

52. Poly(L lactide)(PLLA) has been synthesized by ring opening polymerization of L lactide(L LA) initiated with stannous octoate and ultrasound radiation.

53. Two new derivatives of 4 - dicyanomethylene - 2 , 6 - dimethyl - 4 H - pyran and the corresponding poly ( amic acid ) were synthesized and characterized.

54. Based on the latest literatures, the synthetic methods and the molecular chain structure of poly(o-phenylenediamine) were systematically reviewed and compared in details in this paper.

55. Using HV single poly single metal(SPSM) CMOS DMOS(CD) technology developed by us, we experiment on a 1000V 3-phase power MOS gate driver circuit with C level shift structure successfully.

56. The obtained characteristic ratio of mean-square radius of gyration and its temperature coefficients for the long Poly(dimethylsilylene)chains with side groups approach the asymptotic value of 2.

57. The product made by putting the poly silicic acid which is polymerized with soluble glass into poly iron has better flocculation effect and is cheaper in price.

58. The dynamic rheological behavior and non-isothermal cold crystallization of poly(ethylene terephthalate)(PET)were studied to reflect the disentanglement effect of the pulsatile extrusion flow field.

59. Poly (Ethylene Glycol) Supported (Diacetoxy) Iodobenzene in the Synthesis of 1,3,4-Oxadiazoline Derivatives.

60. The small poly, the physical and mental relaxation is his joy and comfort, in addition to a friendship, not including other into account, interest earned, comfortable and satisfied leaving.

61. In this thesis we filtrated the germ creating Poly - l - lysine from 20 soil kinds of mountain.

62. In my home, we put cat food we bought into some reclosable poly bags, then put them into a rice cracker box to preserve.

63. Poly(glycerol-sebacate)(PGS) was prepared from glycerol and sebacic acid by melt poly-(condensation, ) and the prepolymer(p-PGS) was blended with poly(L-lactide)(PLLA) for modification.

64. Effects of polyvinylamine prepared by basic hydrolysis of poly(N-vinylformamide) on paper strength, drainage and retention of reed pulp and wheat straw pulp were investigated.

65. A series of ultrafiltration membrane were made from chloromethylated poly(phthalazinone ether sulfone ketone)(CMPPESK)with N-methyl-2-pyrrolidone as solvent.

66. A low molecular weight poly(DL lactide) containing carbon carbon bonds was synthesized from DL lactide, glycerin and fumaric acid.

67. This paper studies the average molecular weight of branched chain of poly ( acrylic acid) by viscosity method. The structure of graft copolymer is also measured by IR method.

68. Poly(p-dioxanone) has high degree of crystallinity which limited it to copolymerize with other monomers to be used as controlled drug release materials.

69. The degradation of poly (DL-Lactic acid) and polyethyleneglycol block copolymer (PELA) was monitored in vitro and vivo.

70. Poly ps in superior and middle meatus may cause bone absorption and decalcification .

71. Graphite and even its liner counterpart , poly ( p - phenylene ) are too insoluble.

72. But the poly resistance has got lower temperature coefficient and lower Sheet Resistance than well resistance So we choose the resistance type depending upon the requirements.

73. This TEMPO carrying poly ether is prepared by the copolymerization of olefine oxide initiated by TEMPO sodium salt or sodium phenolate ad epoxy TEMPO.

74. The influence of the PEPA/melamine cyanurate(MC) intumescent flame retardant system on the physical properties of poly (butylene terephthalate) (PBT) resin were studied.

75. The poly ( p phenylene borane ) and poly ( m phenylene borane ) are synthesized by the modified organometallic route.

76. The formulations for nitrile rubber sealing material modified with pasted poly vinyl chloride resin by grafting process at high temperature were designed.

77. A series of poly alkylene succinate was synthesized by ester exchange reactions and the solid electrolytes were made from the polyesters and lithium perchlorate.

78. The modified method of water vapor induced membrane formation was introduced to prepare high hydrophobic poly(vinylidene fluoride)(PVDF) porous membrane in this paper.

79. Results Al i phatic polyester , polyanhydride,[] polyurethane and poly were the most extensively studied synthetic biodegradable polymers as bone substitutes and the scaffolds.

80. Last month, Sequoia Capital and Matrix Partners, teaming up with a local firm, agreed to invest $15 million in Poly Bona, a Chinese movie maker and distributor often described as China's Miramax.

81. The methods of determination of crotonaldehyde in various samples of the PVA(poly vinyl alcohol) producing line by gas chromatography and flame ionization detector are discussed in this paper.

82. Taking 2,4,6-triaminopyrinide as triamine monomer, polyimide foams with cross-linked structures were prepared by foaming poly(ester-amine salt) precursor powders.

83. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials. Part 1 : designation system and basis for specifications.

84. Graphite and even its linear counterpart, poly ( p - phenylene ) are too insoluble, infusible, and brittle.

85. The United States and the group I like poly Divertimento, for me, and many water birds playing surface in the pond is either palatable pleasure.

86. Bionic acicular nano hydroxyapatite(n HA) was used to make composites with medical grade polyamide (Poly hexamethylene adipamide) by solution blend.

87. The encapsulation efficiency and drug loading of triptolide-loaded poly (D, L-lactic acid) nanoparticles were analyzed by RP-HPLC and ultracentrifuge method in this study.

88. Objective: The method of the normal - phase HPLC determination of neamine in Poly - Pred coupling with precolumn derivatization was developed.

89. The crosslinked poly alcohol bead was as medical adsorbent because it has plenty of hydroxyl group.

90. Poly(L-lactide)(PLLA) and poly( vinyl alcohol)(PVA) have been widely used as biomedical materials because of their good biocompatibility.

91. Enhanced coagulation means together used the flocculants of FeCl _ 3 , Poly - chloride ( PAC ) and Poly - acrylamide ( FAM ).

92. Poly - lactide is one of the generally acknowledged biodegradable macromolecular materials.

93. The hybrid solid electrolyte a maximum value when the segments of Poly ( ethylene glycol ) were 800.

94. Poly(vinylidene fluoride)(PVDF) is the fluoroplastics which has the best properties of piezoelectric material in practical applications.

95. The synthesis of Poly(N-vinyl carbazole) with azo chromophore side groups was studied.

96. The poly –procedure was qualitatively studied by the way of light scattering, electron microscopic projection, gravity test and viscometry.

97. Sound product knowledge for lighting, metal, glass, poly and ceramic ware.

98. Using WAXD method, the crystalline behaviours of poly ( butadiene - co - isoprene ) ( Ln -- PBI ) at low temperature were studied.

99. By means a micro - twin - blender the blending of lignin with poly ( butylene terephthalate ) ( PBT ) was studied.

100. Though adjusting the content and distribution of thioether moiety, we synthesized a series of novel poly (ether ether ketone) containing thioether moiety.

101. Is there a process to preheat PCB before potting black poly?

102. The application of poly(o-phenylenediamine) in many areas such as biosensors, humidity sensors and heavy metal ion sensors were systematically reviewed based on the latest literatures.

103. In this paper, asymmetric microporous poly (vinylidene fluoride) (PVDF)membranes were prepared by phase-inversion process.

104. Preparation methods and degradation behavior for poly ( carboxylic acid silyl ester ) s were reviewed.

105. Dendritic poly ( sodium sulfonate ) ( PSS ) was synthesized from dendrimer with 8 acrylic ester double bonds and bisulfite.

106. Load low and high poly model into mapper program to calculate the normal texture.

107. Comparison Tests are made on life drinking water treatment by poly aluminium chloride aluminium sulfate.

108. Regular like spike wave and poly spike wave were found in mastication.

109. Graphite and even its linear counterpart, poly ( p - phenylene ) are too insoluble.

110. Understand and use the chemistry energetics and spectroscopy of poly atomic radicals.

111. Poly(2,6)- and poly(2,7)- anthryl ethene derivatives as electroluminescent materials and method for preparing same.

112. Poly to the surprise and sadness are Parting soak into the depths of the heart!

113. Colored polypropylene processing plant, Poly, blue - broken expected, particles, mathematics, user Canton.

114. Being able to fluidize includes the kinetics of the deposition of the gas, in our case silane, which is important for yield, because unconverted silane lowers your granular poly yield.

115. Poly(aryl ether)s and polyamides are known for their good thermal and mechanical properties, and widely used in aviation, spaceflight, electrical communication, adhesives.

116. Inveatigation of the chemical cyclization of poly ( amic acid ), obtained from HQDPA and m 3 MPDA, were perfomed.

117. In this paper, the nonlinear magnetization data method is firstly extended from the monophase current system to the poly phase current system, and it is of important significance.

118. The blended fiber spinning of PVP with polyethylene oxide (PEO), S-630 and poly (vinylidene fluoride)(PVDF) was also studied.

119. To establish a method for determination of Sn in poly ( L - lactic acid ) ( PLLA ) pharmaceutical necessities.

120. Figure three this named "the heroic 'link ' poly a hall" the picture photography on August 16, Jamaican contestant Boulter pushes to the front in the men's 100 meters finals.

121. The progress on the synthetic technology, properties, characteristic methods and application of Temperature- Sensitive microgel of poly (N-isopropylacrylamide) has been briefly reviewed.

122. The weight - average molecular weights ( Mw ) was measured by GPC . Poly ( aspartic acid ) was characterized by NMR.

123. This paper describes the study of poly - ferric sulfate coagulation - electrolytic floatation treatment of slaughter house wastewater.

124. The exact inception of the use of poly tubes in the United States is unknown.

125. The novel - flocculant poly - nucleate aluminum hydroxy silicate - sulphate ( PASS ) was prepared and polysilicic acid under non - high shear condition.

126. Sound product knowledge for furniture, sanitary ware, plumbing, metal, glass, poly and ceramic ware.

127. Macromonomer poly( N vinylformamide) and functional polymer microspheres are synthesized by radical polymerization, respectively.

128. New cyanate monomers and poly (cyanate ester) net are being developed for the sake of increasing the thermal and processing property of poly (cyanate ester) net as well as reducing its cost.

129. In addition, the poly tiles themselves increase the thickness of the isolation between active silicon regions when it must serve as a self-aligned blocking layer for an ion implantation step.

130. Compared with support cross - linked poly ( vinyl alcohol ) , the DEA - PVT possessed very little non - specific adsorption for proteins.

131. Study on the new natural food preservative - Poly - L - lysine ( - PL ) used widely in Japan were summarized.

132. Transparent hair shampoo was prepared using poly siloxane quaternary ammonium salt microemulsion as a conditioner.

133. Due to the hydrophobicity of poly(vinylidene fluoride) (PVDF), the application of PVDF membrane was limited.

134. The poly crystalline structure have also been observed by SEM cathodoluminescence image.

135. A new method of producing sand binder of mixing resid treated by chemical method with soluble poly -mer was discussed.

136. The changes of intrinsic viscosity and end carboxyl group content with temperature and time were studied for poly(trimethylene terephthalate)(PTT), PET and CDP.

137. The molecular structure of the silicone resin pre-and post-blending modification by poly (butyl methacrylate)(PBMA) was characterized by Fourier transform infra-red spectrometry.

138. The poly(urethane-imide) (PUI) which uses isophorone diisocyanate, dispersed red 19 (DR-19), and pyromellitic dianhydride is synthesized.

138. Wish you can benefit from our online sentence dictionary and make progress day by day!

139. Using Sodium. sulfur and p-dichlorobenzene poly (phenylene sulfide) were synthesized in solvent hexamethyl phosphoramide.

140. The paper introduced the production process and product quality of poly - aluminium chloride in china and its reaction mechanism.

141. Then we tested the photosensitivity of POF whose core material was copolymer of azo-benzene and poly (methyl methacrylate) (PMMA) in experiment.

142. The results showed that in this process of alkaline hydrolysis the demethylation of poly(methyl glutamate)was faster, but debenzylation of poly(benzyl glutamate) was hardly processed.

143. Study on special compound for automobile bumper was made by means of blending. Small bulk PP was modified with co-polypropylene, poly(octene-ethylene) (POE) and other additives.

144. Silazanes were divided into chain - silazane, cyclo - silazane and poly - silazane according to the material variety and synthesis method.

145. The manufacturing status, methods of production and application of poly aluminium chloride were introduced in brief.

146. The separation of proteins on an anion exchange resin (DEA -PVT) containing diethylamino groups supported by cross-linked poly(vinyl alcohol) was investigated under different conditions.

147. There is an interference effect between reaction and crystallization in solid state polycondensation(SSP) of poly(ethylene terephthalate )(PET).

148. Shell fabric for automobile and toy: tarpaulin, loop velvet, poly spun velour, and etc.

149. CONCLUSION: The construction of a tissue-engineered cartilage is possible with chondrogenesis induced BMSC seeding on rapid prototyping porous poly scaffolds in a non-joint environment.

150. Poly ( elhylene acrylic acid ) neodymium ( EAA - Nd ) with various Nd contents has been synthesized.

151. The magnetic nanoparticle, silica nanoparticle and poly - cation nanoparticle were introduced briefly.

152. Biodegradable poly ( L - aspartic acid ) hydrogels were synthesized by a two step cross - linking reaction.

153. The reinforcing and toughening mechanism of poly(lactic acid) composite filled by talcum powder or diatomite combined with toughener compound was investigated.

154. This first-year study is about the exploration and analysis on the electrochromic properties of poly(butyl viologen) (PBV) thin films.

155. The hydrophilic modification of polypropylene non-woven fabric (NWF) surface was conducted by coating PVA (poly vinyl alcohol) film on the NWF surface via dip-coating method.

156. The poly grafted starch copolymer was synthesized by the reaction of glycolide and starch in dimethyl sulfoxide with triethylamine as catalyst.

157. Poly ( ethylene glycol ) ( PEG ) is a hydrophilic polymer flexible long chain.

158. The hydrophilic-to-hydrophobic transition of poly(N-isopropyl acrylamide)(PNIPAM) microgel was studied using a Video based contact angle measuring device.

159. There were developed asbestos free high friction coefficient composition brake pads made of poly compound adhesive agent, hybrid fiber and special fillings.

160. Commercially available poly L-tyrosine was exposed to nitrating species and the damage was monitored by UV spectroscopy and alkaline gel electrophoresis.

161. Secondly, we present the concavoconvex poly gon's area algorithm based on vector product.

162. The polymers were characterized by IR, 1H NMR spectroscopy and DSC. The compatibilities of poly(2 ethyl 2 oxazoline) with some thermoplastic and copolymers are examined.

163. The structure characteristics, properties and application of poly( p - phenylene benzobisoxazole) (PBO) fiber were introduced.

164. Conclusion The method may be used to prepare soluble and high-temperature poly(arylene ether)s.

165. Poly ( anhydroaspartic acid ) was prepared by thermal condensation of L - aspartic acid, which can be hydrolyzed to poly ( aspartic acid ) .

166. Ratio of poly - sulfide rubber and activated viscosity index improver to epoxy was determine and discussed.

167. OBJECTIVE: To prepare the poly (DL-lactide) aclacinomycin nanoparticle in order to evaluate the nanoparticle delivery system and to develop the pharmaceutics of aclacinomycin nanoparticle.

168. The vegetarian meal I provided was very good in protein, fiver, iron, phosphate, vitamin A, vitamin C, thiamin, riboflavin, niacin[/poly.html], and poly and mono unsaturated fats. (the good fats).

169. We found this non-monotonic dependence on fluorinated poly(vinyl cinnamate) (PVCN-F) surface while non-fluorinated PVCN revealed a monotonic decrease of the pretilt angle with exposure.

170. Two pretreatment Methods: Were used, granular activated carbon ( GAC ) adsorption and poly aluminum chloride ( PAC ) coagulation.

171. Poly ( ether ether ketone ) ( PEEK ) is a kind of high performance engineering plastics.

172. Expression of apoptosis - related proteins ( Caspase - 3 , Caspase - 8 and poly ADP - ribose polymerase ( PARP )) was determined by immunohistochemistry.

173. Methods:Monoclonal and poly - clonal dual antibody sandwich method was used to assay the levels of serum interleukin - 2 (IL - 2 ) and soluble interleukin - 2 receptor (SIL - 2R) .

174. An antistatic poly(1,3-trimethylene terephthalate)(PTT) was synthesized from purified terephthalic acid(PTA), 1,3-propanediol(PDO) and antistatic agent via direct esterification.

175. Influences of filler content on processability, mechan i cal properties and cost of low - ratio foamed unplastized poly(vinyl chloride) (PV C) board were discussed.

176. The dewax rate is controlled by the diffusion of paraffin wax in poly propylene.

177. The poly( glycolic acid) grafted starch copolymer was synthesized by the reaction of glycolide (GE) and starch in dimethyl sulfoxide with triethylamine as catalyst.

178. Poly(vinyl alcohol)(PVA)-based polyanion was prepared by esterification of PVA with sulfuric acid.

179. Mixed bacteria could degrade poly ( vinyl alcohol ) ( PVA ) completely and produce extracellular PVA - degrading enzyme.

180. Effect of blending and solvents on the crystallizability of poly (vinylidene fluoride) phase inversion membranes were studied.

181. We cultured mouse osteoblast cells on the multilayer film with the outmost layer of poly(2-aminoethyl propylene phosphate), and studied the cell adhesion and proliferation on the surface.

182. The poly macromer was copolymerized with butyl acrylate in benzene to form the graft copolymer.

183. The poly(o phenylenediamine) molecularly imprinting nanometer layers have wide application foreground on the selective detection to the nerve agent sarin.

184. California Polytechnic State University ( Cal Poly ) was founded in 1901.

185. The block copolymers of poly( butylene succinate)(PBS) and poly (ethylene terephthalate)(PET) were synthesized by a melting process at different times.

186. A novel porous chitosan(PEI-CTS), which has higher concentration of amino group, was synthesized by polyaminating with poly(ethylene imine)on cross-linking chitosan.

187. Planar arrays of nano structured silver particle were self assembled on poly lysine modified glass surfaces.

188. The PVDF - HFP ( poly vinylidene fluoride - hexafluoropropylene ) porous membrane polymer battery was prepared by a phase inversion process.

189. As the complexity steps and high cost of synthetic poly malic acid, producing poly malic acid fermentation is especially important.

190. A poly(4-aminopyridine) (POAP) modified electrode was prepared at GCE. The electrochemical behavior of dobutamine (DBTM) at this modified electrode was studied.

191. Results The poly ( congo red ) modified electrode shows excellent electrocatalysis characteristics for dopamine.

192. In the N - domain, the poly - secretion and RSRR sites recognized by proteinase except for A . pernyi.

193. Additionally, the pendant amino groups on the poly(thionine) chains enabled poly(thionine) modified electrode to immobilize phosphate group terminated DNA probe via covalent linkage .

194. The amphiphilic polymer was blended with the poly(vinylidene fluoride)(PVDF) and prepared membranes by phase inversion method.

195. The production and market status inland and abroad of poly aluminum chloride were reviewed.

196. Organic germanium poly acid derivative could prevent the decline of spleen weight.

197. Objective To simplify the detection method of sulfate in the water purifying agent poly aluminium chloride.

198. Light ageing properties of poly(vinyl chloride)(PVC) by the carboxylic ester rare earth salt and the organotin have been compared by artificial ageing test./poly.html

199. Poly ( L - lactide ) ( PLLA ) was synthesized by ring - opening polymerization of L - lactide using cyclic tin alkoxide compound as initiator.

200. The poly ( amic acid ) exhibited good solubility in common organic solvents.

201. Poly ( methyl methacrylate ) branched chain in MG molecule structure was destroyed when thermal and oxygenous aging.

202. This paper presents a widely available CO2 laser scriber to perform the direct-writing ablation of poly(methyl methacrylate)(PMMA)substrate for the development of microfluidic chips.

203. The number - average molecular weight of poly ethylene - glycol - adipate diols didn't affect the heat decompose temperatures of polyurethanes.

204. Poly ( ethylene glycol ) ( PEG ) is a hydrophilic polymer which has flexible long chain.

205. Results showed that expression of poly ploidy giantism resulting from chromosome duplication were evident not only among organs but also among tissues of the same organ.

206. Poly(phenylene vinylene ) (PPV), polyfluorene (PF) and their derivatives are the most popular electroluminescent polymers due to their semi-conductive and good fluorescent properties.

207. The technology of preparing cohesive poly ( tetrafluoroethylene ) ( PTFE ) board and regarding adhesion property were discussed.

208. Finally, the starting procedure, government role and policies for implementing poly generation strategy in China are proposed.

209. Blends of poly ( phthalazinone ether sulfone ketone ) ( PPESK ) and polytetrafluoroethylene ( PTFE ) were prepared via solution frictiontester.

210. Methods Amperometric glucose biosensors were prepared by electropolymerization of glucose oxidase and poly o-phenylenediamine on platinum electrode.

211. A curable composition includes a functionalized poly(arylene ether) resin, an acryloyl monomer, and a phosphorus flame retardant.

212. LTD. has specialized rubber belts service and poly thane belts series used in industry.

213. MOR zeolite was dispersed into poly(ethylene glycol)oligomer to form a stable gel. Its Electrochemical behavior was first detected by a cyclic voltammeter.

214. And on the basis of device on-resistance study, we optimized the main factors of power VDMOS cellular on-resistance, such as poly width and the impurity concentration of epitaxial layer.

215. Poly(o-toluidine) (POT) nanofibers can be fabricated by using HAuCl4 instead of the traditional used ammonium persulfate as the oxidant through one-step chemical route.

216. Poly (amino acids) have good biological compatibility and degradability, and includes responsable active groups such as the hydroxyl, the carboxyl group, the amino group etc.

217. Adding poly acrylic acid ( PAA ) in the preparation of ammonium diuranate ( ADU ) was investigated.

218. After that, those successive Qin kings kept a poly to aggress the east.

219. This paper reports the synthesis of a series of poly (silyl ester)s by diacetoxylsilane with several dicarboxylic acid.

220. The electrochemical behavior of dobutamine in poly(alizarin red) film modified electrodes(PAR/GCE) has been studied by cyclic voltammetry.

221. The new methods allow a wide range of poly analogs to be obtained in few steps, as the allylic precursors are readily available.

222. Starting from D, Llactic acid and glycolic acid, biodegradable drug delivery material poly(lactic acid-glycolic acid) (PLGA) was directly synthesized via melt polycondensation.

223. Poly Feng said high land prices per square meter in 37 daily rent money.

224. Using trimethylamine, epoxy chloropropane and poly (vinyl alcohol) as materials, the quaternary cationic poly (vinyl alcohol) was synthesized.

225. Poly alcohol has been protected against radiation by benzalation and benzoylation.

226. The poly(tetrafluoroethylene) particles untreated with quenching showed poor abrasion performance with 22% wear rate after 10 weeks, despite better scale-preventing and scale-removing performance.

227. Applications of poly (fluorinated ethylene-propylene) and tetrafluoroethylene-perfluoroalkyl vinyl ether copolymer in such the industries as electronic, chemistry, machine and foodstuff are described.

228. This detector line array is fabricated using 2 micron design rule and a double level poly silicon structure.

228. is a sentence dictionary, on which you can find excellent sentences for a large number of words.

229. Poly ( p - dioxanone ) ( PPDO ) and Poly ( ε - caprolactone ) ( PCL ) are both aliphatic polyester.

230. Poly ester synthetic (phenyl ether), polyester film, laminates sheet, printed wiring board, and multilayer printed wiring board.

231. The Poly(AM-MA) copolymer was synthesized through radical polymerization of acrylamide(AM) with maleic acid anhydride(MA).

232. Amphiphilic poly(vinyl pyridine)(PVP) with uniform polyoxyethylene(PEO) was synthesized by copolymerization of the PEO macromer with 2-vinyl pyridine in benzene, using AIBN as initiator.

233. Through absorption of bromine vapor, the electrical conductivity of poly(phenylacetylene) (PPA) was enhanced by 1012 times.

234. Acryloyloxystarch was prepared and used as the parent for free radical initiated graft copolymerization with the end functionalized hydroxyethyl methacrylate macromonomer of poly (D, L lactide).

235. Poly(aspartic acid) has the structure of the imide ring and can be grafted with the functional side chains of condensing DNA by ring-opening with alkaline reagents.

236. Other reactive templates can also be used for the preparation of glod nanoparticles supported on polymer, such as poly(o-toluidine) and poly(o-methoxyaniline) hollow microspheres, and PANI nanotubes.

237. Lactide is the midbody for the preparation of poly(lactic acid), the ratio of lactic acid to lactide is low and hamper the extensive application of PLA.

238. Poly(succinimide)(PSI) was synthesized by polycondensation of L-aspartic acid in a solvent. The effects of the catalyst, reaction time and solvent on the reaction were studied.

239. The preparation methods, mechanism of forming film, film properties and application fields of poly(p-xylylene) are reviewed.

240. The system investigated are the solutions of monosilicic acid and poly silicic acids with different polymerization degrees.

241. And a high molecular weight poly ( arylene ether nitrile sulfone ) has obtained.

242. It summarized the mechanisms of ultra-violet degradation and stabilization of poly (vinyl chloride) (PVC) as well as the latest characterization methods in study of photodegradation of PVC.

243. It is possible to fabricate ISFET entirely using CMOS process. The gate structure of the ISFET is a multilayer, which consists of insulator, poly and metal. So it is called multilayer-gate.

244. The invention discloses a method for producing poly sodium metaphosphate and a special equipment thereof, belonging to a technical filed of metaphosphate.

245. Different allels mey be acquired within the invented segment after the inversion poly morphism is established.

246. Poly ( acrylic acid acrylamide ) alkali metal salt complex is a new kind of solid polymer electrolytes.

247. Poly ( vinyl alcohol ) has been protected against radiation by benzalation and benzoylation.

248. UV and PL spectra showed that the adamantane modified polyfluorenes exhibited less chain aggregation in comparison with the homo-polymer poly(9,9-dihexylfluorene)(PF6).

249. Meanwhile, with the introduction of phenylene units into polymer backbone, a series of poly(heteroarylene methine) polymers were synthesized.