1 The farmer taught her how to shear sheep.

2 The family is a constant shear flows, flow of mind wandering forever; love is like a hill endless sand, precipitation is the long-term accumulation of care; family like the night sky the Beidou, guided the lost lamb is the direction to go home.

3 In the Hebrides they shear their sheep later than anywhere else.

4 Clumsy on land Manx shear waters may be, but they are elegant fliers and first-class navigators.

5 Do not top or shear the plant; instead, remove whole branches that are dead or rubbing against others.

6 We shall see later that in simple shear a rigid body rotation is involved as well as a displacement.

7 We also had to shear and dip them every year and friends would come to help.

8 A perfect gas can sustain no shear forces so that the above bulk modulus is the only relevant one.

9 The shear properties of polymers, however, are primarily determined by the wriggling,[] bending and twisting of the chains.

10 Mow alfalfa and bundle it in bales, shear sheep, bust broncos.

11 Similarly, in the rubbery state the shear modulus of all polymers depends primarily upon the density of cross-links.

12 All shear stresses must vanish.

13 Without loss of generality, shear deformations will be neglected.

14 All kinds of cold metal, salt, shear die manufacturing.

15 A fluid cannot withstand a shear.

16 The process does not affect the shear stresses.

17 The conditions of interruptable shear wall height are proposed.

18 The mechanism of induced anisotropy, dilatancy, shear softening and cyclic mobility was discussed from the viewpoint of micro-mechanism.

19 The double shear specimen was designed for the study of the creep behavior of nickel base single crystal superalloys at high temperature.

20 The shear strenth is equal to the cohesion of substance.

21 This means it avoids rotational forces on its brain, which tend to shear neuronal connections and cause concussion.

22 The planking and the underlying ribs thus formed a rectangular trellis with no diagonal bracing or shear members.

23 If this is high the layers deform quasi-uniformly though with high shear stresses at the interfaces.

24 One can readily see how a correlation of this kind can arise in a mean shear flow.

25 Conventional shellac records were very brittle; only a few ounces of shear stress would crack them in half.

26 Negative Richardson number corresponds to a destabilizing density gradient; both shear and buoyancy give rise to turbulence generation.

27 Aerospace; rivet design values, static load, for flush head rivet joints, single shear, dimpled, rivet material 2.4360, metric series.

28 The connection of the beam of additive floor and original shear wall, and the principle of structural column and web frame type choices are introduced.

29 The deformational metamorphic evolution of the three types of the ductile shear zones reflects the main reworking during the uplift processes of the deep crustal high grade metamorphic complex.

30 In the present paper we studied the bulk modulus, shear modulus and second-order elastic constants as a function of temperature .

1 The farmer taught her how to shear sheep.

2 In the Hebrides they shear their sheep later than anywhere else.

31 The main quantitative factors and rainfall-class prediction method under stable shear situation are given.

32 These methods are: diagonal braces, shear walls, and joint rigidity ( frames ).

33 The shear strain can be determined in the following way.

34 The shear probe is a basic and essential tool for measurements of ocean turbulence and it is generally mounted with a piezoelectric crystal as a sensor.

35 According to experimental results, an empirical relationship is suggested for predicting the ultimate shear strength of fiber reinforced concrete beams without web reinforcement.

36 The Reliant PowerSlit line of Slitter Rewinders offers the full range of slitting solutions from shear cutting, razor, score, hot knife, and ultrasonic.

37 The resuspension rate of the two kinds sediment shows different relationship for the excess shear stress. Thus, the paper adopts the different formulas to solve them.

38 From the results of these analyses and by the method of superposition[/shear.html], the approximate formulas for calculating shear strength of steel-reinforced concrete short columns are established.

39 Furthermore, the image of contour picture of maximum shear stress change on orthographically rupture mode of Bohai earthquake in 1966 is closer with the macroscopic isoseismal picture.

40 The computing error of turbulent flow shear rate is less than that of energy dissipation.

41 Based on the pseudo-static test of four slit hollow shear wall models of reinforced concrete with different steel bar, the failure mechanism and deformation feature are discussed.

42 In this paper, author develops two kinds of shear connector, pin shear connector and block according to the characteristic of steel - concretes composite open-web plate frame structure, .

43 The effects of different sheeting sections and purlin distances on the shear behavior of shin diaphragm were studied by analyzing the failure modes and shear capacities of the panel.

44 An anti-plane punch-through shear test and an anti-plane compression-shear box test are applied to the study of fracture mechanism of brittle rock under the anti-plane shear(mode III)loading.

45 Again we call the faster wave the longitudinal and the slower wave the shear shock wave.

46 According to the variational principle for wave propagation, the elastic wave equation and the compressional and shear wave equations in a vertically inhomogeneous medium are developed.

47 The influences of the toughener and coupling agent on the morphology, thermal properties and shear strength of the adhesive were analyzed.

48 The method to plot a shear diagram and bending moment diagram in mechanics of materials has been deeply studied in this paper.

49 As a key equipment in bar mill, the normal operation of the cold shear will influence the steel rolling directly.

50 The ratio of the magnitude of an applied shear stress to the velocity gradient that it produces; that is, a measure of a noncrystalline material's resistance to permanent deformation.

51 And values of cohesion under stepped loading are larger than those under stepped loading with shear zone, but the two methods have little influence on values of friction angle.

52 Because classical nucleation theory supposes that bubble formation is occurred under static state, it doesn't reflect the effects of dynamic factors on bubble nucleation, such as shear and elongation.

53 There are two type of adiabatic shear bands theand the transformed bands.

54 In recent years a number of basic and clinical studies have provided evidence that low or turbulent wall shear stress promotes an atherogenic endothelial gene profile.

55 Shear force diagrams are drawn in the manner indicated, with negative shears below the baseline.

56 When the Jiangkou reservoir is analyzed, its different breadth cases and a zone of fracture going through its bottom are considered, and the maximal shear stress in the reservoir bottom rock is shown.

57 It is found that the irreversible shear strain and irreversible volumetric strain are dependent on stress history and stress path. And significant loading rate effect is observed in the tests.

58 They are controlled by shear fracture belt of epimetamorphic rock series of Precambrian Period.

59 Narrator: For three days, Kratos climbed the shear walls of the mountain.

60 A portable torsional vane shear device has been developed to meet the needs of research work in marine geology, river exploration, geotechnics, oil drilling and soil mechanics.

61 The present study shows the mechanical properties of homogenate suspension from the leaves and petioles of Mimosa pudica by stress-shear hysteresis loops during shear stress.

62 The purpose of this paper is to find the distribution laws of the shear force between vertical shaft and surface soil, and to lay a foundation for mechanical model of shaft in soil.

63 The direct shear test on rigid presser was carried out to examine the load - deformation curve.

64 The model makes it possible to calculate the macroscopic behaviors of the two-fluid flow, such as effective pressure, effective viscosity and shear viscosity of particle phase.

65 In this paper, based on the study of compressive performance and shear strength of Yellow River silt bearing cellular bricking structures, the study of flexural behavior is also carried on.

66 In that it is flat with little or no shear lips.

67 The shape, thickness, stretch direction and bend type of the texture on both sides of the shear belt were observably different.

68 Increasing the arch thrust augments the shear stress on the surface of the shearing resistance part, which counteracts the influence of the crushed rock.

68 is a sentence dictionary, on which you can find excellent sentences for a large number of words.

69 In this paper, the stability and control of a hingeless helicopter in wind shear were investigated.

70 The Qinling Group of Lower Proterozoic is an advantageous environment for metallogenesis and the ductile shear zone is a major structure to control rocks and ores.

71 Two formulae can be used to calculate the shear capacity of steel reinforced concrete beams.

72 The propagation process of the Alfven wave in a shear velocity field is calculated, and the dissipation of Alfven waves in the magnetosphere is given.

73 In fluids, forces of tension and shear can often be ignored.

74 The die set shear that is different from general flying shear is introduced.

75 For gas bearing sandstones , Lame constant will reduce and shear modulus increase.

76 It has been demonstrated that certain parts of the human spine, more specifically the dorsally inclined lower thoracic and high lumbar parts, are subject to dorsally directed shear loads.

77 Angular stiffness and elastomer shear strain on maximum swinging angle are important indexes in flexible joint design of solid rocket motor.

78 Design idea and structure of a new slant shear machine is introduced. The calculable formulas of main parameters are got.

79 Circular hole castellated steel-concrete composite beams are members which are made up of the circular hole castellated beams and the concrete slabs working together by shear connectors.

80 The wall energy saving standard can be reached or exceeded by adopting check block type self-cladding technique for exterior insulation of cast-in-situ reinforced concrete shear wall.

81 This method can be used to analyze shear wall structures with elastoplastic hinges or dampers as well as tall frame-type structures.

82 The intermediate-acid volcanic rock is the main metallogenic mother rock. the ductile-brittle shear zone is the important ore conducting structure for the formation of gold deposit.

83 The deformation mechanism of the ductile shear zones is the simple shearing of plain strain, and the quartz glide system is either of basal glide, or prismatic glide and rhombohedral glide.

84 The location of shear strain rate localization coincides in position with the location of volumetric strain rate, which is the actual failure zone of rock.

85 The shear stress in intervertebral disc mainly distributed in fibrous rings.

86 In the point-supporting glass structures, the glass planes are supposed to bear both the bending load such as wind load and the shear load such as gravity.

87 Evaluation of the life by means of the shear strength of sample which pass through heating oxygen aging test according to environmental test specification was.

88 When the bond between bolt and grout is intact the shear stress distribution of the bolt side is described by exponent curve.

89 Furthermore, the second-order effect and shear deformation of the structures were magnified due to semi-rigid connections, the ultimate load resistance of the structures was reduced simultaneity.

90 The effects of shear stress and oxygen supply on cell growth and taxane production were investigated in 250ml Erlenmeyer flasks.

91 For the research on shear deformation characteristics of the discontinuous plane, the hyperbolic function is adopted to describe the shear deformation curve, and the key factors are discussed.

92 This verifies the equivalence of pure shear and simple shear.

93 The tensile and shear properties of F-12 aramid fiber and carbon fiber intem1y hybrid NOL ring composites are presented in this paper.

94 Big deformability was more related with its microstructure, plasticity, and shear strength.

95 Analysis of surface stream and energy fields obviously showed that the squall line occurred behind the surface shear line, and before the convergence area of wind.

96 The shear wave velocities of pavement systems decrease with depth, and their dispersion curves can be obtained by the stiffness matrix approach or the finite element method, etc.

97 The Newtonian PDMS turned to pseudoplastic at low shear rate region and the activation flow energy of compounding system was smaller than pure PDMS because of addition of filler.

98 The Shear Dilatant Effect of Joints Refers to the Increase of Joints' Volume and Thickness Accompanying Shear Displacement as Caused by the Asperity of the Joint Surface.

98 Wish you can benefit from our online sentence dictionary and make progress every day!

99 Shear force is implicit in the development of bending moments.

100 When the shear line vapour band is weak, and the Plateau shear line will move southeastward.

101 Therefore, the effect of interfacial shear on critical wave velocity is clearly different under different Reynolds number.

102 Based on the first-order shear deformation plate theory, axisymmetric governing buckling equations are derived for a functionally graded material circular plate subjected to in-plane pressure.

103 The shear-lag coefficient arid deformation of T-shaped short-leg shear wall are solved based on variation principle, various parameters and loading forms which may impact the shear-lag are discussed.

104 At the same time, detailed experimental studies of turbulent shear flows were being made.

105 The double shear creep specimens and modeling turbine blades have been experimented for the validation of the model.

106 To analyze the inflammatory mechanism of pulsatile low shear stress-induced atherosclerosis (AS) of the common carotid artery in rabbits in vivo.

107 The shear strength of COG and COF bonded with ACF is studied by impact test.

108 The critical shear angle of quasi-static state was given under different loading speeds and frame lengths condition, and the influence of specimen size on this shear angle range is also discussed.

109 In the process of elongation at a fixed transmural pressure, the shear modulus was non-linear as function of the longitudinal stretch ratio and strain.

110 The more is principal stress deviator peak, the more possible is to emerge negative pore water pressure and to show more shear dilatation with high dry density.

111 On the basis of the consideration of many interface shear stress influential factors, a formula is established. By comparision, the formula matches well with test results.

112 Flying shear is one of key equipment on rolling mill.

113 Influences of initial cohesions and friction angles on shear band(SB)patterns and entire deformational characteristics were investigated.

114 Textbooks commonly denote shear stresses by the symbol and two subscripts.

115 First, the global response predictor (such as deflection, frequency and buckling load) was computed from the general finite element analysis procedure without using shear correction factor.

116 The pumps must be of the low shear Archimedes screw type.

117 By using the condition of displacement harmony, the shear stress is gained by solving a truncated set of simultaneous equation.

118 To increase the shear strength on lift joints of the high roller compacted concrete dam(RCCD), a kind of construction method is brought forward.

119 The wall shear stress formed under the impact of blood flow is most prominent in the neck of aneurysms than other locations and is weak in the aneurismal wall.

120 Pore water pressure is increased earlier and then minished with shear strain increased for clayey-fine-sand, which shows pore pressure behavior of close-grained sand.

121 Direct tensile, acceleration, and shock wave tests belong to the tensile test group, whereas adhesive tape, direct shear, peel and scratch tests belong to the shear test group.

122 A stiffness method for determining the response of shear lag effect on box girder is presented.

123 The MAO layer exhibits good shear resistant for there is no obvious peeling during scratch test.

124 The rear cone decentration and compact leg tilt can both result in a phase shear and twist on the optical field, and lead to phase jump and tilt along the misalignment direction.

125 Using these formulas and a 1-D LDA, mean square value of 2-D turbulent velocity fluctuation and Reynolds shear stress have been measured for water flow in a square duct.

126 The results show that strength of NEPE solid propellant under multi-axis stress state is related to strain; octahedral shear stress nonlinearly increases with the average main stress.

127 The type of shear connectors selection test and full-scale model test for the anchorage zone segment of Jintang Bridge, which is under-construction, were the project background.

128 The volumetric strain induced by shear stress is shrinking at first, then dilating later under triaxial compression test conditions,[ ] of which the value is determined by density and stress state.

129 Shear Angle research is one of the basic problems in metal cutting theory.

130 Every spring they shear off the sheep's wool and sell it.

131 The sheathing - to - framing joints are the primary influencing factors of the light wood - framed shear walls.

132 The shear strength of CFST columns was correlated to the axial force ratio and the shear-span ratio.

133 Finally, the shear correction factor for each element was estimated and the global response corrector was calculated by the incorporating shear correction factor.

134 Reasonable design of shear connector need availably control of horizontal shearing force between steel webs.

135 Normally the shear velocity is about half of the compressional velocity.

136 The critical starting condition of silty clay has a non-linear relationship with shear strength and water content.

137 Within this dissertation, both thermodynamical and hydrodynamic effects of shear are considered, for the first time, in the modeling of the shear-induced phase behavior of binary polymer blend.

138 The optimal time which produces the best rheological properties of modified asphalt depends on the blend composition and on the shear rate used.

139 The transformation is due to the shear strain imposed on the specimen by ECAP.

140 The results show that the methods developed in this paper are reliable, which can reasonably simulate the seismic collapse process of reinforced concrete frame structures with shear type deformation.

141 Stability method that based on the FE (Finite Element) stress analysis of slip surface and the shear strength reduction method are two principal methods of FEM slope stability analysis.

142 All the firstling males that come of thy herd and of thy flock thou shalt sanctify unto the LORD thy God: thou shalt do no work with the firstling of thy bullock, nor shear the firstling of thy sheep.

143 The antiplane shear problems of collinear cracks at the interface of dissimilar anisotropic materials aredealt with.

144 On the above basis, an empirical model was developed for correlating the erosion rate with the oil temperature and shear stress.

145 White-light scanning technology was used to test the wrinkle characteristics of a square planar film reflect-array which is under pure shear force.

146 The direction of maximum tension moves asymptotically toward the direction of the shear.

147 The particle route method is produced for the shear force diagram drawing of multi-span beam based on the geometric principle of the force addition.

148 The distribution curve of workpiece temperature induced by the shear heat source is obtained.

149 Results from undrained triaxial shear tests show that this model can well describe the stress-strain characteristics of soft clay.

150 The delay was correlated to the development of shear lips crack surface.

151 The test results show that the reinforced porous brick wall similar tO normal reinforced brick wall on aseismic design, shear resistance of the bar cannot be used very much when using lap joint ...

152 Objective To investigate the changes of vascular structure and expression of adhesion molecules in endothelial cell at different time points under low shear stress.

153 Results showed that the shear strength increases metal bar embedded in fillet triangle.

154 The interfacial shear stress is a constant proportion of the bottom shear.

155 Be as foundation, the aeolian sands occurs shear destruction easy and it's bearing capacity low.

156 Infrequently, medial extension and comminution of coronal shear fractures may result in a separate trochlear fragment that is not accessible from the lateral approach.

157 In order to acquire good combination of new and old materials in reinforcement process some proper measures are adopted in construction to enhance the shear ability and impermeability.