1. You'll need a strong abrasive for cleaning this sink.

2. An abrasive material is unsuitable for cleaning baths.

3. Rub down with fine abrasive paper.

4. She was a tough girl with rather an abrasive manner.

5. His abrasive manner has won him an unenviable notoriety.

6. Use an abrasive pad for stubborn stains.

7. He has an abrasive way of treating people.

8. Smooth down with a fine abrasive paper.

9. If you criticize Pablo, he becomes very abrasive.

10. She has a rather abrasive manner.

11. Sand the surface with abrasive paper until no flakes of paint stand proud of the surface.

12. Pamela was unrepentant about her strong language and abrasive remarks.

13. His direct, often abrasive approach will doubtless ruffle a few feathers.

14. His abrasive wit and caustic comments were an interviewer's nightmare.

15. Throughout his career he was known for his abrasive manner.

16. Harris was abrasive and arrogant.

17. He's such an abrasive spirit, isn't he?

18. Dust is abrasive and may contain metallic particles.

19. The drawing style is rough and abrasive, the heavy blacks underlining the sinister plotting of Silver and his renegades.

20. Mr Serra's abrasive personality and taste for political intrigue have made him many enemies.

21. He became less abrasive, more polite, as he fine-tuned himself in the same way he fine-tuned the company.

22. Do not use abrasive kitchen cleaners or fluids and never apply the cleaner directly to the surface.

23. He is quite ready to use his abrasive manner in an effort to get a better life for the orphans.

24. The abrasive new general brushed aside Stirling's request and proceeded to give him a lecture.

25. At the same time, though less abrasive, the book is only intermittently less sophisticated than those that preceded it.http:///abrasive.html

26. Later Harris clashed with the abrasive Fearnley Whittingstall as to whether the actor's hair had been dyed or not.

27. Rub the table down with a fine abrasive paper before painting it.

28. You can do this by hand with abrasive paper and a sanding block.

29. Women sometimes damage their skin by going overboard with abrasive cleansers.

30. The drill might be made of wood or bronze, using sand or emery, imported from Naxos, as an abrasive.

1. You'll need a strong abrasive for cleaning this sink.

2. An abrasive material is unsuitable for cleaning baths.

3. Rub down with fine abrasive paper.

4. She was a tough girl with rather an abrasive manner.

5. He has an abrasive way of treating people.

6. If you criticize Pablo, he becomes very abrasive.

31. However, they sometimes flex with use and can be damaged by abrasive cleaners.

32. Use two coats, rubbing down with fin abrasive paper between.

33. Mr Prescott's capacity for saying what he thinks and his somewhat abrasive manner are evidently not qualities that are easily packaged.

34. Next to diamond dust, it was the hardest abrasive known to man.

35. He also lacked experience leading a large group, and he was sometimes abrasive and patronizing.

36. She was a tough girl with an abrasive manner, and seemed very knowledgeable about the seamy side of life.

37. It was a greatly respected and slightly feared publication, dealing in hard fact, abrasive as Maggie herself was abrasive.

38. When hardened, smooth down with abrasive paper, then seal with plaster primer.

39. The company have just completed market research on a new type of organic toothpaste called Abrasive.

40. Once hardened, the repair can be shaped flush with a plane and chisel, before a final finish with abrasive paper.

41. Sununu's abrasive and often arrogant personal style won him few friends during his three-year tenure at the White House.

42. This resembles a cylinder lawnmower, and drives a drum to which sheets of abrasive paper are fitted.

43. If leather is involved, rough the area to be stuck with coarse abrasive paper.

44. Servants bow and scrape. Khaki shorts replaced by abrasive long trousers for the evening.

45. He was a generous man with strong abrasive streaks and keen hatreds.

46. If your body skin looks dull, removing dead skin with an abrasive glove can make a big difference.

47. He is still haranguing rallies in the usual rabble-rousing, tub-thumping, arrogant and abrasive way.

48. More than anything, it is an effective way of providing a shield against abrasive dirt.

49. Anson's abrasive personality has landed her in trouble many time in the past.

50. Conspicuously absent was Mr Ruslan Khasbulatov, the abrasive and ambitious Speaker, whose manoeuvring led to the latest crisis.

51. Khaki shorts replaced by abrasive long trousers for the evening.

52. Fahmy was transparent and subtle, convivial and abrasive.

53. The factory under: abrasive, grinding fluid, brightener, PU lining.

54. Comes with one 14" abrasive cutting wheel."

55. The abrasive article is useful for abrading a workpiece.

56. The abrasive grain is impregnated in nylon.

57. The abrasive belt grinding is an efficient grinding technology.

58. How would you handle an abrasive captain or coworker?

59. How would you handle an abrasive Captain or coworker?

60. Cup wheel is investigated in this paper which includes cutting model of abrasive particle,(http:///abrasive.html) computer model of face grinding and optimization of technological parameters etc.

61. Is burning to leave the abrasive amplifying to spread can lead on person many super of the glowworm be nearby surrounding.

62. Abrasive hardness refers to the wear debris in the external force, and from the abrasive surface, ease of falling, which reflects the strength of bonded abrasive dominated.

63. In this report, the surface morphology of marble in face grinding with single abrasive grain has been observed by SEM.

64. The authors analysed the feasibility of adopting the suspension casting process to improve on the fracture toughness, the cold-short resistance, the fatigue resistance and the abrasive resistance.

65. A kind of new typed robotic abrasive belt grinder was designed.

66. The test results of abrasive grain constitution showed that the standard sands and can assure high testing accuracy is capable to unify the testing result.

67. Theresult proved, abrasive water jet metal-cutting don't exit heat effect.

68. Abrasive ratio, thermal stability, impact toughness and cohesive strength are main performance figures of PDC.

69. The reason for abrasive wear resistance enhancement of bionics smooth surface made by Laser Carving Technology is grain super-refining strengthening, hardening, effect of dowel pin and bionics.

70. Abrasive wear of cermet coatings of chromium carbide formed by SHS technology is controlled by both a micro cutting procedure and a micro tearing one.

71. It is caused by highly abrasive material grinding against the core.

72. The worn surface morphologies of the composite[], abrasive dust and transferred membrane were investigated by means of scanning electron microscope and optical microscope.

73. The basic pattern of abrasive grain erosion is studied on four kinds of macromolecular materials, and relative regression equations are worked out.

74. The synthetic technology and conditions of phenolic resin as adhesive of abrasive belt were discussed.

75. The adhesion , micro - hardness and abrasive resistance of the film were tested.

76. The stress and grinding mechanism of a single magnetic abrasive grain in the magnetic abrasive finishing are analyzed. The required properties and preparation technologies of MAGS are discussed.

77. Abrasive wear may be defined as damage to a surface by a harder material.

78. The root causes of motorcycle cylinder block wearing are temperature variation and presence of hard abrasive dust.

79. The result is aluscious, mobile soundscape, capable of ambient purr or abrasive noisebursts.

80. The three abrasive rollers are distributed at the roller path of the millstone uniformly, and are fixedly to the loading rack.

81. Proper hardness, abrasive ability, high efficiency of polishing, well precision.

82. The composition comprises a particulate abrasive material in combination with lysine, an optional oxidizing agent, and an aqueous carrier therefor.

83. Is simply, oneself stuck up, once the left hand touch the pocket in Qin Dynasty and now after grasp a pack of pearly abrasive worn with the plastics sack in hand, shine let him look.

84. A coated abrasive product is disclosed, which includes a substrate and an abrasive layer overlying the substrate.

85. Traditional wetting agent often leads to defects in vitrified abrasive wheel.

85. try its best to gather and create good sentences.

86. Dual cleaning action using a chemical and abrasive action formula.

87. It is obvious that the properties of coated abrasive are better than those of non-coated abrasive, and coated abrasive tools made from coated abrasive have high abrasive performance and long life.

88. A trademark used for an abrasive of silicon carbide crystals.

89. The second principal normal stresses can lead to grinding crack which generates forward beneath the abrasive grain in the plane of grain motion.

90. Abrasive flow machining ( AFM ) does not belong to the conventional processing craft.

91. This paper analyzed the new type abrasive material characteristics, the manufacturing technology and their applications.

92. The impeller, wear plate and agitator are made of abrasive resistant 28% chrome iron (600 Brinell, 57 Rockwell C).

93. Abrasion paper Good grade of manila or other strong paper, coated with glue and an abrasive material, such as sand, emery or carborundum. Also called Emerypaper, Sandpaper.

94. Clean damaged areas by abrasive blasting or power tool cleaning, feather edges to sound and intact areas.

95. The chief of staff issued a series of orders in an arBitrary and aBrasive fashion.

96. It can be used for last chamfering in the continuous machine and. replace the abrasive wheel.

97. Crack forming is one of the main reject phenomenon for vitrified abrasive wheel.

98. The new - type of ultrafine corundum abrasive materials, prepared by sol - gel technique, have excellent grinding performance.

99. The influence of carbon in martensitic matrix (by use different austenizing temperature) on two body abrasive and impact-abrasive wear resistance of ductile iron is studied.

100. The main wearing mechanisms of the tin bronze are fatigue splitting, adhesive transference and abrasive wearing.

101. Hardness than corundum, abrasive easily broken, sharp edges and corners, good cutting, grinding heat and small.

102. The skin of the shark is very tough, sandpapery and abrasive, it could cut.

103. Abrasive flow machining (AFM) is a nontraditional finishing process that is used to deburr , polish, radius and remove recast layer by flowing a semisolid abrasive media across the workpiece surface.

104. White aluminium oxide abrasive is electrically fused in an arc furnace processed alumina as raw material.

105. Round supply of nylon abrasive polishing abrasives, including grinding wheels, wings to fly round, grinding discs, grinding wheels special relief, such as scouring pad.

106. Once sucked into an airplane’s turbines, the abrasive material can easily cause engine failure, but an aircraft’s weather radar can’t spot the ash.

107. Abrasive entities may be included in the coating for nonskid purposes.

108. The micro-scale abrasive wear behaviors of TAMZ alloy were studied using a TE66 micro-scale abrasion tester.

109. Therefore, filtering of abrasive matter required pre-treatment stages such as pre-filtration, centrifuging, or sedimentation in order to protect the membrane.

110. Crankshaft, piston, plunger piston, guider, guide rail, rotary drum, slide block, and various abrasive wear surface.

111. LTD is located in Wuzhong Development District of Suzhou City, It is a specialized coated abrasive industrial company that collects designing, developing, producing and selling into integration.

112. It will have erosive and abrasive effects on the pipe line.

113. Cleansing method: To wipe up or extract with cloth, abrasive paper or cleanser.

114. Using FN-309 adhesive etc. as joint adhesive and, the water-resistant abrasive cloth, R/R or G/G abrasive cloth as the substrate belts the process of abrasive cloth lap jointing was studied.

115. Sawblade for cutting exotic and abrasive woods, chipboard, MDF panels up to 50 mm with a good finish. Use on table saws.

115. is a online sentence dictionary, on which you can find excellent sentences for a large number of words.

116. The slides are first cleaned ultrasonically several times in alternate baths of trichlorethylene and acetone, and are then scrubbed with a mildly abrasive detergent.

117. The artical introduces the simple method and tool for chip breaker of lathe tool lapped by cast iron abrasive wheel in lathe or milling machine.

118. Do not use detergents that contain lanolin or other oils, gasoline (petrol), chlorinated degreasing fluids (such as trichloroethylene ), organic solvents or abrasive cleaning agents.

119. The effect of varying mates on abrasive wear character of martensitic wear-resistant steel by MLD-10 type impact abrasion tester was investigated.

120. A temperature control system of technology testing furnace for vitrified abrasive tools was designed paper.

121. Most of the abrasive is bonded abrasive is made with artificial abrasive, but also useful for the direct processing of natural ore and rock into a natural abrasive.

122. This company produces own brand "Oriental deer" sand strip coil REBON series consolidation, abrasive.

123. Our purpose is No Best but Better. Supplying the special profile products of coated abrasive and form a complete set polishing to customers.

124. We want to buy Sanding Wheels, Abrasive Wheels, Flap Wheels, Convolute Wheels, Polyurethane Wheels, Buffing Wheels, Polishing Wheels, Finishing Wheels.

125. With the support of more than a century's continually innovative technology, Coated abrasive products have formed a wide range of products for different industries.

126. With the increase of grinding speed or the abrasive grain size of the grinding belt, the grinding rate increases.

127. Exhibit: Sand belt, sand paper and abrasive product, diamond sand wheel, Pitch cutting, Black lead cloth, etc.

128. Abrasive for blast cleaning shall be clean and dry and free of contaminants.

129. As a sort of grains, the polycrystal diamond has more cutting edges and so it has higher abrasive efficiency.

130. Our main products are Blastman robots and Blastman manipulators for abrasive blasting, which can also be incorporated in the supply of entire abrasive blasting and surface treatment lines.

131. The influences of abrasive grain size, belt speed, contact roller's hardness, grinding depth and grinding feeding speed on surface roughness were discussed.

132. The results revealed that the wear process of rock bit bearings and specimens in modelling tests is the effect of simultaneous actions of adhesive wear, fatique wear, oxidation, and abrasive wear.

133. The regular shape of diamond grains is selected as the example. Areas of diamond abrasive grains are equivalent to regular hexagon.

134. The corrosion forms include pitting corrosion, intergranular corrosion, abrasive corrosion - erosion, galvanic corrosion and crevice corrosion.

135. Natural or artificial abrasive powder or grain, on a base of textile material, of paper, of paperboard or of other materials, whether or not cut to shape or sewn or otherwise made up.

136. Advantages and disadvantages of various methods were analyzed, and technical indexes of superhard abrasive material after treatment were summarized.

137. The polyethylene surface shall be roughened by abrasive blast cleaning for a minimum length of 100mm from each cutback area.

138. The experiments show that it can be effectively deburr and polish by using the self-developed equipment and abrasive flow media which improves the injector efficiency of nozzle.

139. Some measures to accelerate vegetation restoration are proposed in accordance with the regulation on vegetation succession and characteristics of abrasive material.

140. Phenomenon of erosion delay in forming kerfs by abrasive waterjet will cause kerf incline in straight cutting or kerf taper in circular cutting process.

141. The impact force and pressure are described about the pre - mixed abrasive waterjet.

142. The grinding block made of carborundum abrasive, is very hard and sharp.

143. The unstable conduction nonlinearity of abrasive SiC brings the difficulty stress - grading of generator stator coil end.

144. Abrasive polishing tools: T-shaped carved mill, engraved mill, grinding wheel machine, Eucampia wheel machines, sanding machines, polishing machine, water mill.

145. Each functional module of typical abrasive water jet cutting system is analyzed.

146. This product is dry powder in the dry cleaning detergent softener can also can be used as abrasive material and emulsion stabilizer SC.

147. This paper takes use of the features of ultrasonic grinding which can make the macroscopic force, stress and calory in grinding lower,(http:///abrasive.html) and then utilizes relevant abrasive in the ultrasonic grinding.

148. Use spatula and abrasive papers to repair scratches which were inadvertently on the face.

149. Abrasive grain erosion is the basic wear form on the tapered liner in desilters and desanders.

150. Any rust spot should be removed with wire brush or by abrasive blasting.

151. Fahmy was at once transparent and subtle , convivial and abrasive, suave and prickly.

152. Black Aluminium Oxide AbrasiveBlack aluminium oxide abrasive ( lower aluminium oxide abrasive ) is a new type abrasive material for polishing various metal.

153. On the basis of self oscillating pulse water jet and pre mixed abrasive water jet, a new type abrasive jet, self oscillating abrasive water jet (SOAWJ), is put forward.

154. This abrasive tool is used to replace the traditional Magnesia Bonded Carborundum Abrasive Stone for the coarse and middle grinding of the surface of the ceramic tiles.

155. The effects of water pressure, off distance, transverse speed, abrasive flow rate, abrasive grade and the kind of abradant to the effectiveness of rust -removing are analyzed.

156. Our hand pads are cut from industrial quality non-woven nylon, impregnated throughout with abrasive grain and boned with heavy duty resins.

157. The main characteristics of abrasive wheels include five factors, namely abrasive material, grain size, hardness, structure and bond type.

158. All these will lay a foundation on full automation of freeform curved surfaces magnetic abrasive finishing.

159. The mating system of the present invention may be used to join a coated abrasive to itself, or to join multiple coated abrasives to each other.

160. GMZ suction-type pump in accordance with different media, with a variety of interchangeable parts material flow, applied to transport abrasive or corrosive, large granular or fine particle slurry.

161. This paper expatiates on the definition, types, and actual results of after-treatment of conventional abrasive materials.

162. Abrasive flowing , sandpaper production, marketing ; Wujinjiaodian, chemical products, electric tools , construction materials, plumbing, angle iron wholesale.

163. Is stack height controlled properly based on pinning and abrasive used?

164. For the lower hardness of the surface, use slurry abrasive with wax-coated particles can reduce the polishing time and improve the accuracy of the surface polishing.

165. The natural abrasive has special effect and superior performance than artificial abrasive in some field.

166. Sanding Wheels Abrasive Wheels , Flap Wheels, Convolute Wheels, Polyurethane Wheels, Buffing Wheels, Polishing Wheels, Finishing Wheels.

167. All areas which are not to be coated shall be protected from abrasive blast cleaning.

168. When abrasive grains impacted on the work piece surface, the top layer atomics are removed, plastic deformation appears at the same time.

169. What is the abrasive grain being used, aluminum oxide, silicon carbide, zirconium etc? - Especially for the last pass.

170. The development of the whitening agent, the thickener, the abrasive and the humectant are introduced in this paper, the corresponding questions which need to be improved are put forward too.

171. A method for detecting the protrusion height of diamond abrasive grain on diamond wheel was proposed based on the digital image identification technology, and the measuring system was established.

172. However, tool wear is high in USM, due to the abrasive cutting action.

173. That is, the bonding agent that holds the abrasive particles on the wheel must be stronger than the forces which tend to make the revolving wheel fly apart at high speeds.

174. The feature of abrasive belt grinding as well as the design and application of special-shaped coated abrasive tool made of belts are described.

175. Free abrasive wire saw technique is the main method for monocrystalline silicon slicing process.

175. Wish you can benefit from our online sentence dictionary and make progress every day!

176. Mr Samak, abrasive and uncouth, may prove an even more divisive prime minister than Mr Thaksin.

177. Passing by abrasive of whole hemisphere can be done the sealant, have concentrative wear and tear, sealed well.

178. Ceramic industry: abrasive materials, alumina, porcelain clay mud, mud and superfine glass powder, refractory material, quartz sand, PVC powder grain tree, citric acid, PE powder, washing powder, etc.

179. Usage:It can be used for making bonded and coated abrasive tools, free grinding and polishing.

180. Baking soda's finely gritty texture makes it an excellent, gentle abrasive cleaner.

181. If the undeformed chip thickness is reduced, the effect of the top part of the abrasive grain will increase.

182. Abrasive grain up only 30 % weight; its self - sharpening action is weaker, resulting in lower grinding efficiency.

183. Petroleum industry and chemical conveying for all types of abrasive and aggressive chemincals.

184. A unique cladding powder material to harden corrugating rollers surface was developed to tackle the severe dry friction abrasive wear.

185. The results showed that, the unsmoothed surface can change the ploughing to rolling when the surface are worn by abrasive.

186. The paper enumerates section calculation formula of sprocket hob grinding abrasive wheel and its calculation process.

187. The grinding efficiency of reseau abrasive cloth is improved because of SiC is arranged in a cusp on the reseau base cloth.

188. The magnetic abrasive grain is the key factor which impedes the development of magnetic abrasive finishing.

189. The high abrasive ability of the titanium carbide was caused by the cutting power of the particles, while that of artificial diamond resulted from a high hardness of the particles.

190. An abrasive article having an apertured coated abrasive member, filter media, and an attachment interface member is formed by an ultrasonic welding process.

191. It is revealed that with the changes of Ar flow rate and arc current the abrasive wear resistance and erosion resistance are changed with a contrary tendency.

192. This gentle peeling , containing natural Kaolin and wheat germ, easily peels and cleanse abrasive particles.

193. The characteristic of microchippings, chippings of abrasive grains, and the wear of them under different cutting depth were analysed.

194. But the abrasive Mr Campbell was a Labour insider before he was a spin doctor.

195. In the same time, abrasive wear is the major failure reason in mining machines.

196. Proper hardness, enduringly abrasive ability, high efficiency of polishing, well precision.

197. Is a sandblasting machine can use abrasive (metal and non-metallic abrasive abrasive) using compressed air force, spray the surface of the workpiece to a mechanical equipment.

198. The mating system comprises mating portions positioned at coated abrasive end portions.

199. In addition, the Pneumoconiosis during dust more quarrying, abrasive industries.

200. Abrasive grain makes up only 30% weight; its self-sharpening action is weaker, resulting in lower grinding efficiency.

201. ExhibIt'sand belt sand paper abrasive product , diamond sand wheel , Pitch cutting, Black lead cloth, etc.

202. The unstable conduction nonlinearity of abrasive SiC brings the difficulty grading of generator stator coil end.

203. The voice was tart, high, businesslike, the tone flat, midwestern, abrasive.

204. Oil, grease and other contaminants shall be removed from the steel and adjacent polyethylene surfaces by solvent cleaning in accordance with SSPC SP1 prior to abrasive blast cleaning.

205. These offer usefully technologic parameter for widely spreading of technology of magnetic abrasive finishing.

206. The hardness and abrasive property of the surface, and the anti-shrink efficiency of the treated wood samples,(/abrasive.html) were all improved.

207. First , the intensifier of abrasive waterjet cutting machine is analyzed in this dissertation.

208. Replaceable, one piece urethane liner offers long wear life even under the most abrasive conditions.

209. Bainite has higher abrasive wear resistance than tempered martensite with equal or higher hardness in hard abrasion, but in reverse in soft abrasion.

210. Brown fused alumina is one of the major abrasive products. Comparison test of chemical analysis of brown fused alumina is a must check item in laboratory proficiency testing of abrasive trade.

211. The hydraulics and abrasive parameters of premixing jet has great effect on casing cutting efficiency.

212. Construction equipment in place: excavator, crane, welding machine, angle grinder, abrasive cut-off machine and any other equipment.

213. Explosion factors and abrasive water - jet cutting principle of the device are analyzed.

214. Faculty had complained about his abrasive style and imperious manner.

215. Remove rust, mill-scale and other loose material by abrasive blasting or power tool cleaning.

216. Abrasive hardness measurement method, more commonly used are hand-cone method, mechanical cone method, Rockwell hardness tester hardness measurement method and blasting assay.

217. The abrasive wear behavior and mechanism of an enamel coating were investigated with a rotary disk type abrasive wear machine.

218. The structure and the working principle and the characters of a new type of pressing block abrasive belt grinder is introduced here.

219. Main uses: flux for metallurgy, ceramic, glasswork, abrasive substance, foundry, refractory, smelting etc.

220. High thermal conductivity fire resistance , heat shock resistance, low expansion, inoxidizable , unattackable, anti - abrasive.

221. Adopting imported ABS plastics for shell, spaying imported abrasive resistance alcohol - proof paint, makes shell friction resistance.

222. The study on the abrasive belt grinding has provided valuable information for 2 M 5815 grinding machine.

223. Friction characteristics of PC and its alloys can be explained by adhesive friction theory, and wear of these materials are controlled by adhesive, abrasive and fatigue wear mechanisms.

224. Thin-film technology has firmly established itself as an effective method for reducing abrasive wear, surface pickup, galling, friction, and both chemical and thermal attack.

225. A special wide abrasive belt grinding facility is designed to be used in flat - part deburring belt.

226. I plant abrasive stone, all kinds of diamond resin polishing disc and the zero number, as well as various types of blade types and specifications.

227. The abrasive material used may be a synthetic grit a ground slag ground corundum iron or steel shot. It must not contain sand or any form of silica.

228. Black Aluminium Oxide AbrasiveBlack Aluminium Oxide Abrasive(lower Aluminium Oxide Abrasive)is a new type abrasive material for polishing various metal works.

229. For the two kinds of abrasive grain—ordinary abrasive and ultra hard material,(sentence dictionary) carborundum and diamond were chosen as samples for dispersing experiment.

230. In this paper , metal - bonded diamond wheels of different sized abrasive grain with different porosity were fabricated.

231. Do not use any type of abrasive pad , scouring powder or solvent as alcohol or benzine.

232. This paper discussed the formula of CBN(cubic boron nitride) resin abrasive tools which was prepared with modified phenolic resin with bismaleimide(BMI/AEF) as bonding agent.

233. He is an abrasive New Yorker in a country that tends to elect hail-fellow-well-met types like Ronald Reagan and Bill Clinton.

234. Abrasive Waterjet AWJ polishing process is a recently developed precision machining technology.

235. The main wear mechanisms of the coating are abrasive wear and delamination wear.

236. The phases can improve the bonding strength between coating and matrix. The abrasive grain resistance of the coatings is 11.26 times as great as copper, the adhesion resistance is 7.97 times.

237. PLC control system of a deburring equipment with abrasive material is introduced.