(1) Flysheet fabric: ripstop nylon with silicon elastomer coating which waterproofs both sides of the fabric and makes it more tear resistant.

(2) When water diffuses into an elastomer the water droplets form impurity sites.

(3) The modifications of the thermoplastic elastomer SBS is studied.

(4) The workpiece was considered as elastomer, and was deformation when clamped both by bench clamp and fixture was simulated with ANSYS.

(5) Sealed with the Burgmann MG 1 elastomer bellows mechanical seal.

(6) Polyolefin thermoplastic elastomer (TPO-101) based on ethylene and octene copolymer with polyolefin resin formed by the reactive blending of thermoplastic elastomer.

(7) Electrostrictive composites of thermoplastic elastomer polyurethane (PU) and the ferroelectric lead zirconate titanate (PZT) with various volume fractions were prepared by hot roller miller.

(8) It was found that the sprayed polyurea elastomer could be used to efficiently prevent the steel gate from corrosion, and the technology could have enormous long-term economic benefit.

(9) The thermoplastic polyurethane elastomer with resistance to yellowing for shoe making was synthesized by using one-step method. The effect of assistant was studied.

(10) Made of SEBS and SBS basically, Thermoplastic elastomer or TPE/TPR, is a polymer alloy with general plastic processing performance and rubber property.

(11) A high performance polyurethane elastomer reinforced multipleof polyester fabric provides a strong, yet flexible section v - belts.

(12) The deformation and contact frictional force of elastomer pressure shear break are studied in proportion loading.

(13) Refers to the elastomer Blends with the thermoplastic resin - based sealant material.

(14) In this paper, thermoplastics polyurethane elastomer ( TPU ) modified and toughened polyoxymethylene ( POM ) are investigated with Brabender extrusion melt blending.

(15) Wear - resistance spray polyurea elastomer SPUA-102 was prepared from MDI, liquified MDI, polyether polyol, polyether polyamine and polyamine chain-extender.

(16) Angular stiffness and elastomer shear strain on maximum swinging angle are important indexes in flexible joint design of solid rocket motor.

(17) In this paper[ ], we adopt prepolymer method to synthesize casting PU elastomer.

(18) This paper introduced the injection mold design of the Polyurethane elastomer.

(19) This paper analyses the mechanism of adhesive friction and lag effect of elastomer of stern-tube bearing.

(20) CNBRP and PVC were mechanically blended and prepared as a thermoplastic elastomer.

(21) The properties of hydrogenated styrene-butylenes-styrene (SEBS) are described, and the progress in the research on the property and morphology of the SEBS elastomer modified by blending is reviewed.

(22) So sandwich structure had the same elasticity with cellular silicone elastomer.

(23) A traditional xanthic disulfide (XD) modified CR was improved greatly and a new trend combining CR with speciality elastomer emerged .

(24) The product is LSR O seal, which has better airtightness than elastomer and the other characters of high temperature resistant, anti-aging, anticorrosive, non-toxic and environmental protection.

(25) The Influence of the loss factor, thickness and flake filler on the sound isolation performance of polyurethane elastomer is studied.

(26) A soft, black, versatile thermoplastic vulcanizate in the thermoplastic elastomer family.

(27) Glycerol polyether 3010, tolylene diisocyanate, 1,4-butanediol and catalysts are used as raw materials to preparecasting polyurethane elastomer in one step.

(28) Interchain interactions. The polymer chains can be free to slide past one another (thermo-plastic) or they can be connected to each other with crosslinks (thermoset or elastomer).

(29) Recently, a kind of block polyether acidamide resin with the trade name of PEBAX has made the greatest contribution to the general improvement of thermal- plastic elastomer family.

(30) Through the experiment, the differences of the processability and the physical properties of the elastomer based on three different diamine chain-extender were compared.

(31) The research method can also be applied to the jumping flection problem of other elastomer.

(32) With metallocene elastomer as toughening resin, Polypropylene is modified in blending toughening and produced into blown film by water-cooled downward extrusion method.

(33) Spray of Polyurea Elastomer (SPUA) is a newly developed and healthy technology of water proofing without resolvent and pollution.

(34) A raw rubber for millable polyether polyurethane elastomer was prepared.

(35) PP/ethylene-propylene-diene terpolymer (EPDM) thermoplastic elastomer was prepared by the dynamic photocrosslinking method.

(36) The dampening device is usually a hydraulic shock absorber, although, it could be an elastomer damper.

(37) General elastomer life of 10 years. As with elastic buffer, damping effect, so there is a strong vibration in situations to use more.

(38) Baumann 21000 Elastomer Lined Butterfly Valve angle seating disk design minimizes liner shearing especially on non-lubricated dry gas service.

(39) The thermoplastic polyester-ether elastomer(TPEE) was synthesized with dimethyl terephthalate(DMT), 1,4-butylene-glycol(BG), polytetrahydrofuran(PTMG) as raw materials.

(40) The paper laid special stress on introducing professional application vehicle and their internal equipment to spray polyurea elastomer when application in remote place.

(41) The graft copolymer was a kind of thermoplastic elastomer with good mechanical properties when mass fraction of polystyrene macromer was about 40%.

(42) Chlorinated Polyethylene ( CPE ) has many good properties as a novel elastomer.

(43) A new family of metallocene-based polyolefine (MPO) is evaluated. Many properties of MPO, including clarity, flexibility, low temperature ductility and thermoplastic elastomer behavior are emphasized.

(44) A high performace thermoplastic elastomer with high modulus, suited for air bag door applications.

(45) With the ball socket of a mini car as the study instance, it is presented to substitute polyester elastomer for polyformaldehyde in production of ball sockets.

(46) A novel polyoxyalkylene amine with high reaction activity used in sprayed polyurea elastomer was synthesized by the reaction of amino- crotonic acid ester.

(46)

(47) Taking advantage of tensor, succinct writing and artistic form, it discusses generalized Hook's Law from the anisotropic linear elastomer to the isotropic linear elastomer.

(48) Normal servicing can be accomplished by installation of elastomer repair kits.

(49) Products and Prossing Application: Fluorine and silicone coating, Fluoroplastic, Fluorine elastomer, Anticorrosive equipment, etc.

(50) A new elastomer of 3-D accelerometer for vibration measurement is presented. Three vertical double-parallel-girder beams are used, and component of acceleration is sensed by each parallel beam.

(51) Flame retardant spray polyurea elastomer SPUA 301 was prepared from MDI, MDI 50, liquified MDI, polyether polyol, polyether polyamine and polyamine chain extender.

(52) The spectrum indicates that a polyethylene - like species has migrated to the surface of the elastomer.

(53) This paper introduces mechanical property, medium resistance, low temperature toughness, age resistance, adhesive tension and construction of sprayed polyurea elastomer.

(54) A low modulus high performance thermoplastic elastomer with food compliance specificity.

(55) The critical technology of applying spongy elastomer back-coating to decorative fabric is demonstrated here with a description of the excellent performance of the finished goods.

(56) Development history, manufacture, application and advance of fluorocarbon elastomer coatings were sketched.

(57) A low modulus high performance thermoplastic elastomer with compliance specificity.

(58) A thermoplastic polyurethane elastomer(TPUE) which has good miscibility with NG is synthesized and used in thermoplastic composite solid propellant propellant(TCSP).

(59) Test results indicate the force ductility test is a simple and effective means showing low temperature tension performances of elastomer modified asphalt coating.

(60) The EPDM/PA thermoplastic elastomer with PA 35 phr had good mechanical properties, resistance to solvent and thermal ageing properties.

(61) This new kind of acetoacetic ester-terminated polyether can be used for the synthesis of polyether- imine elastomer which has good mechanical property.

(62) Development history and popularization situation of technology of spraying polyurea elastomer are focused.

(63) A new type of thermal plastic elastomer of TPU/SEBS-g-MAH/SEBS is introduced in this paper and it has excellent hand feeling , together with high polarity of bulk.

(64) As one kind of high molecular weight suffocate hydroxybenzene antioxidant, antioxidant 1010 is widely used in plastic, rubber, synthetic fiber, elastomer, petroleum products and fodder fields.

(65) The organic combined technology of sprayed polyurea elastomer and spayed polyurethane foam is suitable for site spray of waterproof and thermal insulation roof.

(66) CarboxilatedBuna is a general purpose oil resistant elastomer known as carboxylic - acrylonitrile - butadiene.

(67) Thermoplastic elastomer TPR TPE /, also called artificial rubber or synthetic rubber.

(68) Spray polyurea elastomer is a significant technology improvement in the coatings and finishing industry, it brings great driving force to the corrosion protection industry.

(69) The preparation prepolymer for soft PU elastomer and its application were investigated.

(70) Acrylic rubber ( ACM ) is a kind of special synthesizing elastomer with saturated main - bond structure.

(71) The blow-up property of a nonlinear damped hyperbolic equation, which describes the motion of the neo-Hookean elastomer rod, is proven.

(72) Objective : To study the microphase structure of silicone elastomer reinforced cross - linked polystyrene.

(73) The progress and application of stabilising single - functional rubber, dynamical multi - functional memory smart elastomer were researched.

(74) AIM:To explore the effects of thermal aging factors on the color stability of the SY 1 silicone elastomer so as to select the best pigments for its clinical application.

(75) The base of braiding machine bobbin carriers is molded of an elastomer,[/elastomer.html] polyurethane.

(76) Waterproof and moisture permeable membrane to TPU - based polymer elastomer material, its good flexibility, high strength.

(77) The type of cyanate ester resin (CE) and its modification by thermosetting, thermoplastics, rubber elastomer and unsaturated compound with double bond are reviewed.

(78) A high performance thermoplastic polyester elastomer with food compliance specificity.

(79) Yes Yes the pressure and the apparent elastic tension. General elastomer life of 10 years. As with elastic buffer, damping effect, so there is a strong vibration in situations to use more.

(80) EPDM is a terpolymer elastomer made from ethylene - propylene diene monomer.