1. I smelled the light oil on it.

2. Try smearing the spanner jaws with light oil, then dipping them in fine sand.

3. The dark fell early on the town of Abdera. As the merchants lit oil lamps, their familiar booths turned magical.

4. As the merchants lit oil lamps, their familiar booths turned magical.

5. Mrs McGill fries bread for breakfast, takes Chas to bed, cooks supper, lights oil lamp and nurses Nana.

6. The vapor lock of light oil swing arm , which is a technical issue to be solved, has been puzzling the people related to oil.

7. Mechanisms to enhance FCC light oil yield and to lower the coke yield(i. e. strengthening FCC process) by adding polymeric active additives in the feedstock were introduced.

8. The naphthenic light oil as a novel dispersing medium was applied to the investigation of propiconazole 25% EC.

9. Generally, a series of experiments is essential in light oil air injection study and project design.

10. The heavy oil is distributed at handing wall, light oil and gas reservoir at the footwall.

11. A testing method to determine light oil content in lubricating oil by closed flash point determinator is introduced.

12. Paint calendering is glazing technology in coloured light oil and thermal pressure of two units.

13. In deep formation light oil. condensed gas and natural gas are often berried, forming special oil and gas reservoirs of high economic value.

14. The hardness of highlights oil and different light oil have different best curing temperature.

15. Extract residues (coal), light oil alk. , acid ext. , Friedel-Crafts reaction products with isobutylene; Extract residues(coal), light oil alk. , acid ext.

16. The MZCC process, which is intended to improve light oil yield and long operation cycle of commercial units, has great theoretical and practical significance.

17. Light oil and the residued cyclohexylamine were recovered through the vapour distillation.

18. Light oil pump house is mainly used to convey some volatile and inflammable oil products.

19. Whether the light oil was mixed in lubricating oil and the proportion of light oil in lubricating oil were judged by the closed flash point temperature of lubricating oil.

20. Use the example of coordinating light oil pump house and fire system transformation to discuss the design problem of oil house transformation with modern safety conception.

21. As increasing of heavy oil component in raw oil and rising of light oil yield, this result in stricter requirement for lift pipe reactor of oil refining unit.

22. The paper analyzes the reasons of vapor lock of light oil swing arm for rall tanker from oil property, oil temperature, technological flows and the wall temperature of swing arm.

23. The paper analyses the reasons of oil vapor produced in the light oil pump house. Some measures that should be taken to reduce oil vapor are introduced.

24. Heavy crude oil of Tahe is a inferior and heavy oil. It is processed with the shallow splitting unit and cannot get qualified with light oil, but can get qualified with heavy fuel oil.

25. Reasonable fan cooling system to guarantee that the drying effect of water-borne light oil.

25. Wish you can benefit from our online sentence dictionary and make progress day by day!

26. The test run result showed that LHA-28 possessed good hydrothermal stability, high bottoms crackability, good coke selectivity and high light oil yield.

27. This use of the materials containing Covalent form by initiating energy form of light oil mask.

28. It is processed with the shallow splitting unit and cannot get qualified with light oil, but can get qualified with heavy fuel oil.

29. Performance evaluation of metal passivator in FCCU was carried out in the small fixed bed with two evaluation indice. The evaluation index is the light oil yield and H2/CH4in cracked gas.

30. Under the normal environment conditions, there was no fuel vapor lock in the engine using No. 2 light oil based fuel.

31. It proves that the light oil - based fuel has good antiknock property and good quality.

32. Commonly used light oil for epoxy resin, alkyd resin, acrylates.

33. water-borne light oil and UV - curing varnish or with the help of an ALCOLOR fountain.

34. UV light oil is generally used by conglutinate , conversion, photoinitiators, polymerization inhibitors and other additives.

35. A testing method to determine light oil content in lubricating oil by closed flash point tester is introduced.

36. Now air injection into light oil for EOR has received more attention.

37. The heavy oil is distributed at the handing wall, light oil and gas reservoir at the footwall.

38. Heavy oil emulsion visbreaking can alternate the process of blending light oil in heavy oil and electrical heating of super- heavy oil, but has not been broadly popularized yet.