1) A composite isothermal curve covering the required extensive time scale can then be constructed from data collected at different temperatures.

2) Isothermal forging is an advanced processing technology.

3) The non - isothermal degradation was found to be first order reaction.

4) Calculation showed that the isothermal combustion temperature of pulverized coal furnace and the fluidized bed temperature decreased when the steam load produced by the bark increased.

5) Isothermal normalization can improve or eliminate the banded structure and duplex grain structure in forging blanks.

6) Due to the character of isothermal microcalorimetry, we can obtain complete thermogenic curves of cell metabolism and thermokinetic equation during metabolic process.

7) Kinetic Gas Theory - Ideal Gas Law - Isothermal Atmosphere - Phase Diagrams - Phase Transitions.

8) Rolling circle amplification (RCA) is an isothermal nucleic acid amplification method which is simple, rapid,[http:///isothermal.html] highly sensitive and specific.

9) Simulation results for a non - isothermal CSTR process demonstrate the effectiveness and efficiency of the proposed method.

10) Non - isothermal kinetics of fatty acid crystallization from emulsion is studied in a batch crystallizer.

11) The isothermal quenching process of the ductile iron camshaft was analyzed.

12) Non - isothermal thermal decomposition kinetics of mancozeb was studied by thermogravimetry.

13) The structure of cyclic annealing and isothermal annealing has a little difference, but carbides average size of cyclic annealing is greater than that of isothermal annealing.

14) The isothermal annealing process to eliminate the banded structure and to control the hardness of forgings was introduced.

15) Using the method of isothermal forging spheroidal graphite iron pipe of good quality can be produced.

16) The non - isothermal and isothermal crystallization kinetics of PA 1212 were studied by DSC.

17) The data were fitted to Murnagahan isothermal equation of state ( EOS ) to get the bulk modulus.

18) The model 311 gas chromatograph is a self-contained unit with an isothermal oven, heated injector and detectors.

19) In this example the end result is five layers, two containing salt fingers and three with isothermal concentration-driven convection.

20) The phase transformation and weight loss rate of ludwigite in oxidizing roasting were studied by DTA-TG, isothermal TG and XRD.

21) STUDENT: Just a quick question on some of the constraints, like isothermal, isobaric, isovolumetric expansion.

22) An experimental study on metastable equilibria at 288K in the quinary system was done by isothermal evaporation method, also.

23) Especially is suitable for the thin stalloy workpiece and class of pinchcock isothermal quenching.

24) This paper presents a mathematical model of calculating gas isothermal compressibility factor.

25) In addition, a new isobaric EOS of four parameters is obtained by using the second isothermal bulk modulus and we may test, compare and analysis it by comparing with the experimental data.

26) The hot deformation behavior of a self - developed zinc based alloy was investigated by isothermal compression test.

27) The fatigue lives of in-phase thermo - mechanical fatigue (TMF) and isothermal fatigue (IF) were carried out in cast hot work die steel in stress control in this paper.

28) An experimental research has been taken on heat efficiency, startup behavior, isothermal characteristics of a vacuum phase change heating system using a new kind of compound working medium.

29) Wear resistance of 65Mn ( 65SiMnR)steel ploughshare may be improved obviously by means of isothermal quenching.

30) The paper introduced the situation of producing solid bearing cages and studied the isothermal temperature extrusion technology and die design.

31) The stress variation with temperature and isothermal relaxation in copper films deposited onto silicon wafers are studied by fixed point laser reflection method.

32) A process taking place at constant temperature is said to be isothermal.

33) In this paper, the internal energy and heat of the polytropic process, the adiabatic process and the isothermal processes of the varying mass system are discussed.

34) The spheroidizing behaviors of carbides formed from deformation at high temperature in medium chromium cast semi steel had been studied during isothermal spheroidizing process.

35) Within less than 1 millisecond the steep- fronted shock wave has traveled some distance ahead of the isothermal region.

36) For compressor, the optimal compressing process is the isothermal process.

37) By mathematical deduction, an inductive method for treating kinetic data of high heat intensity pyrolysis of oik under non- isothermal conditions was presented.

38) Due to the character of isothermal calorimeter, we can obtain complete thermogenic curves of cement hydration during hydration process.Sentence dictionary

39) JK703 Serial energy efficient double row push rod isothermal nodulizing annealing furnace .

40) Isothermal spheroidizing process for H13 hot-working die steel was studied in th is paper.

41) The isothermal crystallizing rate of polychlorOprene(CR)was determined by differential scanning calorimetry (DSC) at constant speed of temperature rising.

42) Compensation—For the rapid calibration of large numbers of thermocouples, the reference junctions can be made at an isothermal multiterminal strip.

43) It reveals that much of nano-sized carbides of interface precipitation and supersaturated precipitation generating in the ferrite matrix when the isothermal temperature is low.

44) Anisotropy of isothermal remanent magnetism is a recently developed technique for rock fabric study.

45) The thermal decomposition kinetics of carbinol - formaldehyde polymers has been studied by non - isothermal thermogravimetry.

46) So then, going from the initial to final states with a red path, ou start with an isobaric processand then you end with an isothermal process.

47) The influences of various isothermal hardening treatments on microstructure and properties of semi-steel made by quenching and isothermal hardening and forging, which contain 1.

48) With the isothermal holding time prolonged, the thick rod-like upper bainite associated and gradually developed into featherlike bainite.

49) A simplified model of isothermal austenite grain growth has been developed.

50) The non - isothermal phenomenon may bring about significant effect on the fluid flow and heat transfer.

51) For the sake of energy-saving and productivity rising, isothermal annealing by use of residual forging heat of the gears for the Santana car has been studied in this paper.

52) A new forge residual heat isothermal normalizing technique for alloy carburizing steel is put forward.

53) The isothermal and non isothermal crystallizing behaviors of PETG were studied.

54) Using the method of isothermal forging spheroidal graphite cast iron pipe of good quality can be produced.

55) Using electron microscope, the bainite morphology of spheroidal graphite cast iron after isothermal quenching was investigated.

56) The dendritic growth of alloy non-isothermal solidification become slower and the second dendritic are less developed than isothermal growth.

57) The DSC method is used to research isothermal crystallization kinetics of synthesized copolyester.

58) An effective algorithm based on false transient method to solve the non - isothermal diffusion model is developed.

59) The different trigger points of LDMOS's intrinsic npn transistor by isothermal and non-isothermal methods are compared and analyzed.

60) Three-dimensional isothermal material flows in the metering section of injection molder with different screw heads during injection molding are simulated through POLYFLOW software.

61) And you know, you could have a reversible engine with lots and lots of steps, but you could always break them down into some sequence of adiabatic and isothermal steps.

62) An experimental study on non - isothermal flow resistance for Coke - Residual Oil Slurry ( POS ) in tubes was made.

63) Isothermal forging process are the best deformation process, according to anti - torque arm specifications.

64) The intrinsic kinetics of KD306 type sulfur tolerant methanation catalyst was studied in an isothermal integrated reactor and the reaction model of power functions type was established.

65) The spheroidizing grow, in isothermal spheroidizing process, of carbides formed from deformation under high temperature in, hypoeutectic white cast iron is studied.

66) The relational expression of natural convective heat transfer of isothermal vertical strip was found.

67) The high - pressure metamorphic rocks underwent an isothermal decompressional retrograde process after the peak metamorphism.

68) A new ICE working cycle with a partial isothermal compression stroke is advanced.

68) is a online sentence dictionary, on which you can find excellent sentences for a large number of words.

69) Cordillera type has a close relationship with high-temperature metamorphism and accompanied the emplacement of granitoid, giving rise to isothermal decompression and then isobaric cooling pT-t paths.

70) The stability of the vitamine B_(12) injection was studied by accelerated stability test with the classical isothermal method.

71) This paper discusses the finite time availability of ideal gas system in constant volume process, constant pressure process, isothermal process and adiabatic process.

72) The concentration distribution of pulverized coal in blowpipe of blast furnace was measured in an isothermal two-phase model by means of a computer measuring system based on infrared transmission.

73) The article from practice, it introduced the study on isothermal extrusion using the deform.

74) Therefore, it is of great significance to research the superplastic properties of these alloys for using superplastic isothermal forging to manufacture complex aviatic forge pieces.

75) We also find that under isothermal boundary condition, due to heat can be distributed in time, the internal thermal resistance and heat distribution leading role on the module temperature rises.

76) The effect of forged isothermal hardening of high carbon low steel ball were studied.

77) For the facility of the calculation, the isothermal section of the 1873K was been made as numeralization.

78) Under the calefactive and isothermal conditions, the seepage flux increased nonlinearly as the pore pressure increased.

79) When the isothermal time is long enough, the carbide precipitated between the rod-like upper bainite, so the upper bainite presented normal featherlike micromorphology.

80) The microstructure and property of alloy carburizing steel forged parts after general normalizing and isothermal normalizing were studied.

81) The coking and deactivation of virgin naphtha aromatization catalyst are studied on isothermal reactor.

82) The study is focused on isothermal precision forming technology of rib - web forging parts.

83) It can replace traditional isothermal anneal as advance heat treatment of roughcast of bearing rings.

84) It has been found that the coercive force is very sensitive to the temperature of isothermal magnetic treatment.

85) Advantageous in high activity, good selectivity and long operation cycle, the C_2 hydrogenation isothermal reactor ER-424A/B has a unique hydrogenation effect.

86) The improvement of the conventional isothermal annealing was also explored in this article.

87) Similarly, it is composed of the two isothermal and two isobaric processes.

88) Increasing the semisolid isothermal heat treatment temperature can promote solute diffusion and quicken grain spheroidization speed.

89) Under isothermal condition, the results show that the pyrolysis of MSW nearly all is occurred on one time range, but it's initiative time and terminal time is not same.

90) Results show that isothermal and dynamic rheological behavior of resin fit in Arrhenius rheology model very well, and the model results and the experimental results are in good agreement.

91) The isothermal flow of power - law molten polymer fluids in coat - hanger die is studied.