1 An intelligent telephone design based on MCU was introduced.

2 Experienced in Digital circuit design and MCU circuitry.

3 This is an 8-bit MCU/MPU disassembler software.

4 ST Microelectronics's Turbo μ PSD 3300 series MCU products.

5 Audio output from sound file for MCU.

6 MCU and light touch control.

7 As to controlling system, the four-channel signals from MCU are output to DC amplifier to be amplified and then loaded to PZT platform.

8 The detail about the communication controller that uses MCU and RTL8019AS Ethernet controller chip is given.

9 With the technology of MCU intelligence testing,[] the problem of how to measuring the size and location of postal matters is solved effectively. The system as sample has been applied in ates...

10 Fully digital line switching and MCU controlled service reset timing.

11 But between PC and MCU data transmission speed too slow, lack of real-time, lack of dynamic tracking advantages.

12 The system uses DSP, MCU (Microcontrol Unit) and CPLD (Complex Programable Logic Device) as the core of the system hardware and uses digital video technology.

13 This procedure for the MSP430 MCU and real-time clock interface HT1381 procedures, the use of C language.

14 The external memory bus may be isolated from MCU and the bus is released to the DMA controller.

15 In order to realize and MCU communication and data processing. And through dynamically link will coordinate data to measuring software. We set up a virtual instrument development platform.

16 The MCU and wireless remote control technology have been applied in the outlet, which has the ability of sending command signal and receiving device status signal in wireless way.

17 Main circuit topology apply AC - DC - AC , a combination of control areas used the integrated chips and MCU.

18 This manostat can serve as a TTL circuit or MCU circuitry of power sources.

19 Chapter three discusses the control system whose core is MCU 89C51 and data processing control flow.

20 This paper introduces a method how to do a guard against theft and alarm system of cable, using 485 communication circuit and AVR-ATMEGA8 MCU.

21 Grade and above, especially in embedded Gigabit Network System, Because of the speed and power consumption issues, It is not suitable to use embedded software to achieve in the MCU or DSP.

22 This method can be applied as a base function module in the MCU system of a real time display curve graph.

23 Digital pilot balloon theodolite system design and realization based on C8051F023 MCU.

24 An intelligent flow totalizer based on 89 C 58 MCU is introduced.

25 Through digital-to - analog conversion of high speed DAC amplifier outputs fast impulse signals under MCU s control.

26 An air pressure altitude measurement system which took advantage of the relationship between air pressure and altitude above sea-level was studied and realized by MCU.

27 When it finish signal detect, it will output to MCU to detect or OP AMP voltage comparator to deal with signal strength.

28 This article introduced the hardware and software realization of intelligent battery charger based on MCU.

29 This design construct an sinusoidal signal generator based on DDS(Direct Digital Frequency Synthesis), completed by MCU AT89S52 and necessary analog circuit.

30 The hardware platform of low-power consumption is designed with the low-power consumption MCU (Microprogrammed Control Unit) as the hardware core.

31 HT1626 is a peripheral device specially designed for I/O type MCU used to expand the display capability. The max.

32 software processes of MCU - based - alone operation wind generation system.

33 Based on demand of electric power system for simulated relay protection test, SCM MCU(MSP430) is used to produce sinusoidal signal so as to control the output of simulative variables.

34 As the core of the control system, Infineon XC886 Micro Controller Unit(MCU) has rich peripheral unit to use in the control system.

35 The Microprogrammed Control Unit (MCU) is mainly used to the ordering and obeys of microinstruction.

36 There were two microprogrammed control unit ( MCU ) including primary and subsidiary in control system.

37 The WISHBONE IP core consists of MCU interface controller, data transfer controller and transfer state machine.

38 A spectral data acquisition system is designed based on NMOS linear image sensor and micro controller unit (MCU) technology.

38 is a online sentence dictionary, on which you can find nice sentences for a large number of words.

39 The intelligent tool turret controller uses the characteristic of the MCU, setting up a bridge between lathe tool turret and CNC(numerical control system).

40 The project of developing the core comes from a national key program in science and technologies, Study on MCU High Level Language Description and embeded system technology.

41 MCU integrates the function of traditional power management chip and the monitoring function, thus simplifying the design and saving the cost.

42 And also the transmission circuit, the high-frequency amplification electric circuit, and the band-pass circuit were controlled entirely digitized by the MCU.

43 The system adopts MCU as the control core, provides with the peripheral interface chip used widely nowadays and leads in the ISP technique. So it can carry out the system upgrade very conveniently.

44 The design of intelligent infrared beam smoke detector based on PIC MCU id presented.

45 The system adopts 80C31 MCU as the main controller, hybrid Rare-Earth permanent magnet stepper motor as the execution component, bio-passage rotary transformer as antenna position sensor.

46 The paper describes how to design PROFIBUS-DP intelligent slave station with MCU and SPC3, and discusses the main method in hardware and software design.

47 MCU transmits data to the high - performance digital signal processor ADSP 21161 in two adjacent sampling intervals.

48 The GPS(Global Position System) synchronizing clock is composed of GPS receiver, MCU and peripheral circuits.

49 Preferably experienced in the sales of Flash Memory IC, ARM, MCU etc.

50 The sys tem , which is controlled by MCU , has the multi data display function.

51 Advanced MCU control technology has light touch interface including start control, temperature control and airflow control to achieve safety and reliable operation.

52 Principle of high voltage power supply based on PWM chip TL494 is introduced in this paper. The adjustment of the voltage is performed by digital potentiometer controlled by MCU.

53 Introduce a remote data acquisition system composed of 16bits MCU and the general commercial computer. It can collect multichannel dynamic data continuously, processing and display the data real-time.

54 According to the functional requirement of marine generator protection, A marine generator protector based on MCU is introduced.

55 Application of the high-capability MCU in the intelligent interface is introduced in this paper.

56 It has been found that the major limitations of typical 8-bit MCU are the ALU structure based on accumulator , the clock system design and the CISC architecture adopted in MCS-51 design.

57 The hardware design adopts ultra-low power consumption MSP430 MCU as well as asynchronous MAC based on superframe structure.

58 A real-time data processing system is implemented by adopting8-bit MCU with some peripherals.

59 Note: P1.0 port by the MCU output audio signal, the P1.0 port access transistor to drive the speakers, the best form with two Darlington transistor structure.

60 The core of Slave Interface hardware design regarded PHILIPS P89C668 MCU chip and SPC3 chip interface circuit as, and additional auxiliary interface circuit is formed.

61 On software, we take full advantage of the low power modes of the MCU to finish the task in ISR (interrupt service routine), so, the power of system rest with the ISR executive time.

62 Adoption of MODEM as an embedded system for transmission of data MODEM, MODEM and MCU through serial connections, the real-time transmission of data.

63 The STHR01 is a MCU based temperature and relative humidity sensor module, comprising a SPI interface (master mode) for direct temperature and humidity read out.

64 This system uses the MCU W77E58 as its core, and uses the magnetostriction liquidometer which has high precision.

65 The hardware parts of the sensor adopt the system with dual MCU and dual bus, and each dual MCU system exports the results by its respective communication bus.

66 DMA controller was used to transfer network data frame directly between the TRI and exterior SRAM without the interposition of embedded MCU. It can reduce the burden of MCU.

67 While using MCU as detecting system, input channels of measured signal should always be demanded in the system, and the necessary input information is collected by computer.

68 When the color television is in the stand-by mode,[] the power supply circuit and MCU circuit will still on the power consuming circumstances.

69 Replacing Multifunction enhanced MCU, such as, add to ISP ( in system program ), PWM Generator etc.

70 The MCU replaces the operational amplifier circuit so as to strengthen the system of common-mode rejection, improve the problems of weak signal transmission.

71 Without modifying the architecture of the external memory bus, the MCS51 MCU always occupies the bus.

72 Is there interrupt priority in MCU ? Can it be nested ?

73 One of the units will be configured as a monitor control unit (MCU) of the transmission system monitor and and management information for the continuous monitoring of this VSAT station.

74 In this paper we designed an intelligent hydrology telemetric terminal based on LPC2294 MCU.

75 MCU analog decoder 2272, using interrupt method to determine precise synchronization code.

76 A human-machine interactive system was designed based on ARM MCU and CPLD, in which MCU was used for sampling, key pressing and data transmission, CPLD was used for managing LEDs and nixie tube.

77 Using the MCU control the FPGA driven module advance speed control accuracy.

78 A tiny scalable script interpreter targets at the MCU based measurement device is proposed.

79 With MCU AT89C52, superimposition chip of MB90092 and pseudorandom characters superimposed(), the action such as taking down the camera may be sensed by the system.

80 The two-arm bridge measuring low resistance circuit of MCU control, multivibrator measuring electric capacity, auxiliary leveling bridge circuit, output display circuit are designed.

81 The working principles and characteristics of signal collection circuit, liquid-crystal display (LCD), programmable logic device and MCU controlling circuit of neutron monitor device are discussed.

82 An intelligent debug system is designed. The system mainly is composed of debugging platform with manipulator, oscillograph, driver circuit, test circuit, control circuit, display circuit and MCU.

83 In this paper, we introduce a simple circuit module for voltage measuring and displaying, which main consists of MCU AT89C51, and discuss its interface and application in detail.

84 Hardware part contains power supply module, MCU which choose LPC922 chip and RFID R/W module which choose MFRC522 chip, buzzer and led which indicate the different system status.

85 MCU W77E58 is used as a core component in the main control unit of system. It samples signals from the sensors, calculates, judges and executes the corresponding control action.

86 Emanometer is composed of normal atmosphere air mesh grid pulse ionization chamber, signal magnify and screen unit and MCU system.

87 The software portability of the embedded WEB server gateway based on 51 MCU is studied. In the end, embedded WEB server gateway development model are given.

88 The design of Air-condition temperature control system based on MCU of is introduced in this paper.

89 A tiny scalable script interpreter that targets at the MCU based measurement device is proposed.

90 CISC and RISC are the two main instruction systems for MCU design.

91 This paper presents a design and realization of FFSK (Fast Frequency Shift Keying) modem by using STC12C5410 MCU based on CMX469A. The modem is used in a point-to-point digital communication system.

92 Sub-system, composed by 8051 MCU and assistant circuit, can collect environmental data with multiplex channel and transmit it.

93 An anti-interference circuit of application specific integrated circuit is disclosed that includes: coulometer hardware logic circuit, MCU, and the control circuit of memory data interface.

94 In order to overcome these disadvantages, a non-contact AC regulated power supply, which uses automatic compensation and is designed based on MCU, is presented in this paper.

95 This paper introduces a kind of stepper motor driver with the key of MCU C 8051 F 020.

96 And this paper also introduces data acquisition unit and constant current control unit which makes MCU as the core.

97 By making good use of the intelligent measure and control function of the Microprogrammed Control Unit(MCU), the numerical-controlled and scanned direct current source is designed.

98 The function design of lighting control console is mostly based on MCU now. But there are a lot of defects in the advanced technique, information storage, expansibility,[http:///MCU.html] and real-time performance.

99 Low-power oriented design techniques include selecting low-power parts, low operation voltage, managing clock of MCU or making MCU turn into dormancy, managing power supply of circuit and so on.

100 MCU controlled stepper motor driver chips: A 3972, achieving 64 segments.

101 Advanced MCU control has full light touch interface including start control, temperature control and airflow control to achieve safety and reliable operation.

102 This system consists of DDS signal generator module, MCU control module, keyboard input module and nixie tube display module.

103 In view of universality, function generator with the core of high speed MCU uses the chips of DDS and FPGA. On the basis of generating routine sine wave, it can modulate signal frequency and range.

104 This procedure for the MSP 430 MCU and real - time clock interface HT 1381 procedures, use of C language.

105 Given a kind of Method of the fast PID control with changed scale coefficient for solving the problem of long calculated time with MCU in real-time control system.

106 To meet the microprocessor-based protection experimental teaching, design the microcomputer relay protective device. The hardware core is AT89C55WD MCU and the electric circuit function is completed.

107 In addition, the serial communication mode between the DSP and the MCU was adopted.

108 According to the MSP430F149 MCU function characteristic and the controlling sequence of LCD controller SED1335, the LCD interface of portable RFID reader was designed based on MSP430F149 MCU.

109 Based on Bulk - Only specification , MCU firmware is designed , which is used to control bulk data transfer.

110 I 2 C bus structure of multi - MCU is described , which comes from sampling speed debate.

111 The system consists of driving pulse generating circuit for CCD, instrumental amplifier with low noise, MCU controlling circuit and PC program for dealing with the data conveyed by MCU.

112 Based on these, we also carefully designed and optimized the MCU, lowered the power consumed of the power supply circuit in the stand-by mode further.

113 Hardware design insist of circuit module such as power supply, SCM and I/O device; software design insist of PC and MCU programming.

114 SPCE061A MCU is adopted as central control unit. Especially, we point out several problems which must be paid attention to in the program, and correct the error of experiment data in the end.

115 The system is composed of the conversion circuit of voltage effective value, data acquisition circuit under the control of MCU, LCD and alarm output circuit.

116 The whole demo system designs base on the MC 68 HC 908 GP 32 MCU In - Circuit Programming system.

117 Theperformance of LVI determines the security, reliability and stability of MCU directly.

118 We can analyze and process the data from MCU by connecting MATLAB with MCU serial interface.

119 This paper introduces the multi- clocks method in 8- bit complex instruction set MCU system- level architecture.

120 Information acquisition transformed the analog electronic signal into data signal, which was sent to MCU.

121 After analysis and discussion, the author puts forward a simple, cheap and wieldy communication scheme. MCU shares DSP"s bus and external memorizer to complete the exchange of data with DSP."

122 Thirdly, combining MCU clip AT89C51 with bus controller SJA1000, an intelligent control CAN node for the experimental platform is designed.

123 The equipment adopts a MCU master-slave structure and the circuit uses modular design method.

124 The article introduces the design of the cable automat - ic test system based on the C 8051 F MCU.

125 Signal acquisition part obtains voltage and current signals. The MCU uses these signals to control switches control section and balanced circuit.

126 The method of multi wind speed controlling and wind channel changing are presented and an anti-disturbance technique of the MCU control system is briefly introduced.

127 MCU firmware design focuses on the structure and the realization of firmware, HID class devices developing, report descriptors establishment and ADS7843 sampling program design.

128 A smart car system is introduced based on MC9S12DG128 MCU. This system uses ca sensor as its route recognition device, draws its route information through image recognition.

128 try its best to gather and make good sentences.

129 The relationship between system MCU (Microprocessor Control Unit) operating speed and interruption codes is analyzed, and the longest executive time allowable for an interrupt routine is calculated.

130 High speed electro valves, a Micro Controller Unit (MCU) and an air pressure sensor which conform a complete feedback loop, together with software arithmetic, make the drug liquid spout steady-going.

131 Multifunctional three-injecting-pump detecting system suitable for testing comprehensive parameters in tertiary process was designed using MCU.

132 This code for AT 89 S 51 MCU external interrupt C language program code.

133 The key design scheme and the method to carry out the pulse-jet cleaning controller based on MCU were presented in the paper. The main software flow charts were also introduced.

134 This system adopts 16 bits MCU as the core control device to achieve a bar magnet exactitude measure of small range displacement.

135 The PIC MCU series are applied widely nowadays and has strong function.

136 TLC1543 and MCU to connect through an external signal acquisition TLC1543 to come in, pay single-chip processing, and the LCD screen is displayed.

137 In this paper, it described a resolution of PWM timing device controlled by MCU, which can device DC motor of small power. Designing ideas(?)construction and works of circuit are expanded in detail.

138 The hardware circuit, which uses the PIC16F873A MCU as control unit, and the control system software for the reactive power compensation capacitance intelligent combination switch is introduced.

139 In this paper, we introduce a simple circuit module for voltage measuring and displaying, which mainly consists of MCU AT89C51, and discusses its interface and application in detail.

140 MCU control and high sensitive temperature detector integrated design. Instant heating at 350 oC within 10 seconds which satisfy lead-free soldering.

141 In detail the hardware design comprises of the MCU subsystem design and the interface of CMOS color image sensor, dual-port RAM and DSP.

142 Utilizing transparent memory address mapping technology and selecting suitable MCU, server computer can access VXI instrument memory directly and control VXI module.

143 The system consists of data acquisition circuit under the control of MCU, LCD and alarm output unit.

144 The paper introduces an auto location control system on the basis of MCU after analysing the various problems in the locating process of packing machine.

145 Corresponding adjustable light circuit and MCU outer interface circuit are designed, and relating software program is compiled, to actualize single lamp intellectualized control function street lamp.

146 MPU/MCU interface could control memory interface and the state of the new memory controller.

147 The whole software program of IC card reader gives prominence to transparent transmission of data, and simultaneously takes the characteristics of the MCU software into account.

148 Infrared receiver circuit receiving end with the MCU to connect P 1.2.

149 In this paper, the converting circuit from the GPIB interface to parallel printer interface based on MCU are introduced.

150 The system management software is programmed by application program of DSP and MCU language.

151 The MCU Board is one of basic components of User Terminal and the communication connection is built between Network and Remote Data Servers.