1. The chemical reaction solidifies the resin.

2. The resin from which the oil is extracted comes from a small, tough tree.

3. Some trees afford resin.

4. At this stage a resin is used with a high level of adhesion.

5. The material has been treated with resin to make it waterproof.

6. Resin is a dark, sticky substance.

7. The resin content also makes them particularly glossy.

8. Doherty and McMahon denied conspiracy to supply cannabis resin.

9. July 3: Cannabis resin with a street value of ￡2,000 discovered in a car stopped in Bessbrook.

10. Polyester: Polyester fibres, usually coated with synthetic resin to bond them together in a flat sheet.

11. Her head was back and her chin raised, resin plugging the eye sockets.

12. Inside they discovered 178 kilos of cannabis resin with a street value of half a million pounds.

13. Pine resin, collected by tapping, dried to lumps that made brilliant firelighters.

14. In the parcel were 100 blocks of cannabis resin, each individually wrapped.

15. Then she coats both the resin and the rest of the surface with a sealant.

16. July 4: 300 kilos of cannabis resin and herbal cannabis worth up to ￡3m seized from a Northern Ireland-registered lorry in Dover.

17. The resin hardens when the laser comes into contact with it, gradually producing a perfect three dimensional model.

18. Then tissues were dehydrated with alcohol and embedded in epoxy resin.

19. Iii this procedure, plasma is mixed with a strongly acidic cation exchange resin of the sodium form.

20. Chipboard and other pressed wood products are made with a resin containing formaldehyde, an irritant and suspected carcinogen.

21. The composite is constructed from a graphite cloth which is soaked in a special resin.

22. His car was found to contain 19.93 kilos of cannabis resin, with a street value of ￡65,000.

23. Less commonly used, primarily because stone was so readily available, was a rubber-like ball made from a native plant resin.

24. Estimation of porosity in rocks is aided by impregnation with stained resin.

25. The cross-rails are then rotated soas to tip the samples into the resin pots.

26. He worked on a Diners Club card, removing the ink on the raised letters with a Q-tip doused in polyester resin.

26. try its best to collect and create good sentences.

27. Powercote is an oil-based coating, based on a special synthetic resin called Pliolite.

28. In the second case, frothing may be produced as both the sample and the resin outgas together.

29. Has a rich combination of flavours recalling marmalade and sultanas - and a touch of resin too.

30. Light, high tensile strength fibres confer stiffness and strength to a polymer resin that binds them into a rigid three-dimensional form.

1. Some trees afford resin.

31. It was even possible to scent resin oozing from the hot wood of a dock, the air of warmth and freedom.

32. Once, soon after the divorce, she had gone out with a resin salesman from New York.

33. For chemical filtration, which usually means packing with an absorptive medium such as activated carbon or some sort of resin.

34. Police raiding the riverboat party had found cocaine, ecstacy tablets, amphetamines and cannabis resin.

35. Marbletex smooth contains a tough flexible resin to provide weather resistance.

36. Also avoid tinned foods, because the phenolic resin that is used to line the tin can contaminate the food.

37. After washing the resin with ammonia free water, sodium chloride is used to elute the ammonium ion from the resin.

38. It is understood to have started when tarpaulin sheeting blew on to heaters drying a new resin coating on repair work.

39. This displaces the calcium and magnesium ions from the resin and restores it to the sodium form.

40. Its tough, flexible resin content also provides an exceptionally attractive finish.

41. A commercial filtering medium now on the market combines activated carbon and an ion exchange resin.

42. Good pine shavings are best as they contain resin, which also acts as an insect repellent.

43. Papermakers use a variety of synthetic resin, starch and organic gelatin sizes in the manufacture of watercolour papers.

44. Glossary Fillings Bonded polyester: polyester fibre, coated with resin and bonded flat.

45. Any insect touching it becomes inextricably stuck and very often buried within it as more resin flows around it.

46. Conifers protect their trunks from mechanical damage and insect attack with a special gummy substance, resin.

47. The resin removes the calcium bicarbonate, leaving behind all the essential trace elements.

48. Made from glass fibre rovings and polyester resin, it is normal for the rod to be white.

49. He thought he could smell dope; grass or resin fumes.

50. The new wheel is made from orientated fibres of carbon, glass and Kevlar, embedded in epoxy resin.

51. We can also show the transition in cross-linked polymers such as epoxy resin.

52. Polyketone resin is high molecular polymer.

53. The resin, an unsaturated polyester (UP), was chosen as a bonding agent partly because of its low cost.

54. The catalytic activity of the succinimide resin for hydrolysis of esters was studied.

55. In this paper, the conditions for synthesis of Allyl propionate catalyzed with strongly acidic cationic exchange resin were discussed.

56. Furan resin bonded sand is poor in collapsibility when it is used for non-ferrous metal casting,[http:///resin.html] especially for thin section castings and heavy walled cores.

57. An aqueous polyurethane emulsion adhesive was prepared from epoxy resin, toluene diisocyanate (TDI) and dimethylol propionic acid (DMPA). The product structure was characterized by infrared spectrum.

58. Isopropenyl acetate was synthesized from ketene and acetone by direct esterification using strong acidic cation-exchange resin to substitute H2SO4 as catalyst.

59. The proper resin is figured out by comparing the heat resistance of different organosilane resins.

60. ABS acrylonitrile-butadiene-styrene, for a light-yellow granular or bead-like resin opaque, non-toxic, tasteless , low water absorption.

61. The methyl phenyl silicone resin for heat resistant coatings was prepared by converse hydrolysis-polycondensation of chlorosilane.

62. From rejected ion exchange membrane the perfluorinated acid resin is abstracted as solid super acidic catalyst.

63. A quick curing liquid adhesive was prepared from rubber and phenolic resin as the main component.

64. The tanks are treated with a substance called epoxy resin.

65. The experiments prove that after being modified treatment, the addition of cold-hardening resin is cut down, so that the cost of cold-hardening resin sand can be decreased.

66. The gold of that land is good ; aromatic resin and onyx are also there.

67. A review about the synthesis, curing characteristics, heat resistance and applications of O-cresol novolac epoxy resin is Presented in this paper.

68. Carbon membrane was prepared from pheolformaldehyde resin and its gas permeation property was studied.

69. The acetylacetone spectrophotometric method was applied to determine formaldehyde content in epoxy phenolic resin coating on the internal wall of food can.

70. The resin - heavy broth transforms would - be standard pub fare into a debutante's delight of a dinner.

71. Methods The baicalin, extracted by microwave, purified with acid, ultrafilter and macroporous resin respectively, and the purity of baicalin were quantitatively determined with HPLC.

72. The second method:Diferrocenebutyl disulfide was synthesized from 4-chlorobutylferrocene using sulfurated borohydride exchange resin(SBER).

73. Syntheses of cinnamic esters catalyzed by solid acids such as sulphate and ion - exchanged resin were surveyed.

74. Research on thermostability and intensity of anion exchange resin based on polystyrene is analysised.

75. The primary and secondary windings are insulated by epoxy resin. It has a good ability of insulation and moisture proof.

76. With MQ resin as reinforce filling materials, dimethicone as dilution agent, the transparency liquid silicone that used in spinning trademark was prepared by fumed silica.

77. A water - soluble acrylic resin applicable to - oriented silicon steel sheet was prepared acid and its ester.

78. Mineral filled, toughened, lubricated polybutylene terephthalate resin for injection moldingsurface aesthetics.

79. The process comprises first oligomerizing isobutylene to diisobutylene using a sulfonic acid type ion exchange resin.

80. The modified phenolic resin was synthesized by using catalpa oil provided by Hubei Province, China, and the reaction mechanism and the structure of resin were analysized.

81. Low viscosity reactive casting resin. Recommended with amine and polyaminoamide curing agents for low voltage electrical and electronic applications.

82. Because of complex components, the effects of C 9 cuts to petroleum resin are unclear.

83. The epoxy resin and was characterized by FT-IR and NMR for their chemical structure.

84. The invention provides application of cardanol in epoxy resin curing. In the process of using, the weight ratio of the cardanol to the epoxy resin is 1-60:100.

85. The high pure water system is mainly used for photoelectricity industry and electronic, such as optics resin piece, glasses, precise revertex products ultrasonic cleaning water.

86. The influence of epoxy resin and surface - active agent on the performance is discussed.

87. As a substitute of cadmium red and chrome red, is a match environment red pigment. Used in thermoplastic resin, thermosetting resin, alkyd resin, rubber, other polymer and cement, coating.

88. The present invention provides one kind of 4-aminophenoxyl-o-phthalonitrile monomer and the double end group o-phthalonitrile-benzo oxazine resin therewith.

89. Extract Leach resin can effectively adsorb gold in the presence of acidic medium and can easily desorb gold with thiourea. Such kind resin can be regenerated for reuse.

90. It produces 1 acryl - lic acid resin, modified resin, and polyurethane modified alkyd resin etc.

91. This paper summarizes the application and the development of ion exchange resin.

92. A research is madethe production process of the high NV reactive acrylic resin by solution polymerization.

93. It puts forwards the way to substitute the rubbing resistance material from resin with the fiber cut out of highly strength cast vibrantly .

94. It both dilution, toughness, soft replacement by multi - functional epoxy resin.

95. The scrim layer may be a glass fiber or carbon fiber scrim, or veil, that has absorbed resin from the sheets of prepreg during a molding process.

96. Acetylsalicylic acid was synthesized from salicylic acid and acetic anhydride catalyzed by strong - acid cation exchange resin.

97. The self - stratifying behavior between epoxy resin and acrylic resin is investigated in different blend solvents.

98. The applications of antioxidants in alkyd resin, TDI prepolymer and TDI primer have been described.

99. It were investigated that the effects of some factors such as deblocking time, temperature, polyols and catalysts on the resin curing and its adhesive properties.

100. The pre - irradiation and co - irradiation induced cross - linking of cotton and silk with 2D resin and BTCA was studied. The electron accelerator was adopted as irradiation source.

101. Resin viscosity and surface tension are important factors influencing resin flowage.

102. They differ, however, because electroplating deposits metallic ions whereas electrocoating deposits organic resin molecules.

103. Finishing bath by the above - mentioned synthetic resin, catalyst and softening agents.

104. The precure process makes the resin cure to a certain extent, decreases resin flowability, improves resin processability significantly, and enhances the composite laminates quality.

105. PTFE gasket is manufactured by molding method with PTFE granular resin.

106. The residual mixture in the extraction process to produce fatty acid and resin from crude tall Oil which is a by-product of paper-making industry, is called tall oil pitch.

107. A composite material, e. g. a metal impregnated with lubricant or a casting impregnated with thermosetting resin,() can be obtained using the inventive vacuum high pressure filling equipment.

108. This special polyolefin liquid packaging resin may replace LDPE heavyduty packaging bags and can be used for the package of all kinds of materials.

109. In vacuum epoxy resin dosing machine, measuring - valve is a very important parts.

110. Using diethanolamine as aminating agent and glacial acetic acid as neutralizing agent, aminated epoxy acrylic cationic resin was prepared.

111. The adsorption of acid , acid, propanoic acid , semantic acid on basic polysiloxane resin was studied.

112. In this paper, the synthetic method of high-ortho resol resin and influence of other chemicals ingredients on the adhesive was discussed.

113. The catalytic hydroxyethylation of liquid ammonia by cation exchange resin was studied and the reaction mechanism was discussed. According to the experimental data, the kinetic equation was deduced.

114. In this paper, the recent research advances of laccase in papermaking industry are reviewed in detail, such as bleaching, treating waster water, removing resin, enhancing wet strength etc.

115. The cure-inhibition effect of the atmospheric oxygen usually causes the surface stick of the cold-cured unsaturated polyester resin.

116. The natural properties and characteristics of shellac resin and its application in fabricating optical are descibed.

117. But, the way of making the best of disuse of woodiness is machining to wood-plastic composite (WPC) mixing with resin or plastic.

118. The tests also indicate the high dispersivity of metallic composition and long life of catalyst, thus suggest the presence of the weak interaction between metal and D3520(adsorption resin).

119. The protective coating on aluminium foils packaging for medicine was formulated with thermosetting acrylic resin, pyroxylin.

120. Silicone alkyd coating are based on either the reaction product of a silicone intermediate and an alkyd resin, or a cold blend of silicone resin and compatible alkyd resin.

121. Effects on initiator, reaction temperature, reaction time, monomer content tackifying resin on adhesive properties are investigated.

122. Enriching and refining the extract of Ginkgo biloba leaves with absorption resin are effective methods.

123. A compound resin binder was made with modified epoxy, and small amount of oil-free alkyd resin and etherified melamine.

124. Gluing classes: basic plywood is bonded with a phenol resin adhesive resistant to weather, boiling water and meets the requirements.

125. The property of P510 resin for adsorption gold from gold-bearing chloride solution and desorption gold has been studied.

126. At present , Di - Methylol Di - Hydroxy Ethylene Urea ( DMDHEU, 2 D resin for short ) is durable press finishing agent.

127. Cardanolaldehyde condensation resin(CF) is susceptible to corrosion by alkali because of its slight acidity of phenolic hydroxyls.

128. The films remain properties of both cardanol-formaldehyde resin and epoxy resin , which are acid-resisting , alkali-resisting and organic solvent-tolerant, and also have good service time.

129. The urea-formaldehyde resin was made from industrial 36% formalin and 46% N carbamide in the laboratory. The urea-formaldehyde resin was used to imbed the insect specimens.

130. Amidoxime resin is the best uranium absorption material in the sea water due to its special structure of functional group and excellent absorption property.

131. Combined with the examples about scheme selection of recycle cooling water system in C5 petroleum resin plant, a practicably simple and reasonably economical method is introduced for reference.

132. Chinese fir; modified UF resin; micron wood flake; lightweight artificial board.

133. Carbon membrane supporter ( CMS ) is prepared from phenol - formaldehyde resin ( PFR ) cured by hexamethylenetetramine ( HMTA ).

134. The metallography samples fabricated by the vacuum impregnation of resin are introduced.

135. The flow production lines of the curing agent part and the resin part are identical, and the difference lies in that the requirement of the curing agent on the heat is not essential.

136. Performance and application of protective film of vinylidene fluoride resin are introduced. Basic recipe and method for forming of protective film of vinylidene fluoride resin are described.

137. The relic protection material B 72 was developed by modifying acrylic resin with benzotriazole UV absorber.

138. This paper reports engineering experimental methods applied in brown alumina - black silicon carbide resin - bonded cutting wheel.

139. Addition of resin can promote the formation of free radicals and speed up the thermal cracking reaction.

140. The results indicated that the intensity ratio of beta-ray I/T0 was consistent with the resin content value.

141. Conclusion The ribbon reinforced resin splint was satisfactory in splinting the mobile mandibular anterior teeth.

142. The results show that structure of polyurethane resin has important effect on resistance to yellowing of the transfer film leather.

143. A new type of non asbestos frictional material is developed, which is made of phenolic resin, glass fiber, alumina, silicon oxide, barium sulfate(), copper powder and graphite.

144. The optimum conditions of lac soft resin determination by Soxhlet extraction were obtained.

145. Photoimage etching ink made up by alkali developable novolak epoxy acrylic resin had b.

146. The chemical principle of extracting gold with ion exchange resin is discussed, the latest progress and prospects of the research on ion exchange resin are pointed out, and the tec...

146. try its best to collect and create good sentences.

147. Pigment, dispersant , dispersed resin and dispersing agent are needed in the pigment dispersed system.

148. The prepare method of high modulus resin matrix was introduced, of which epoxy resin TDE-85 was used as matrix, A 50 and MPD were used as curing agents.

149. An alkali soluble photosensitive resin has been synthesized by two-stage process starting from the raw materials of acrylic acid, maleic anhydride and epoxidized soybean oil.

150. The flame retardant resin performance, smoke less, but also of thixotropy, applies to the mechanical strength of a flame retardant requirements of the FRP.

151. Shell molding of phenol formaldehyde resin coated sand has been widely used in foundry and with prospective future.

152. A system of epoxy resin , anhydride and accelerator was selected which efficiently promoting the curing speed and decreasing curing temperature.

153. It is postulated that associated gold ions are adsorbed on the levextrel resin examined from the infrared spectra and ultraviolet spectra.

154. In the technology of dosing deflecting coil, special material as solid reagent of resin is one kind of intensional caustic reagent.

155. The content of the hydrolyzable chlorine ino -cresol -novolac epoxy resin (ECN) is an important factor which influences the quality of the resin.

156. Cypermethrin microcapsules with urea - formaldehyde resin wall were prepared by in - situ polymerization process in aqueous medium.

157. The various influencing factors and main synthesis processes of dicyclopentadiene modified unsaturated polyester resin are investigated.

158. In 1977 I traded my goldsmith's forge for wood shavings ,[http:///resin.html] madder root and the smell of hot resin.

159. CONCLUSION Macroporous resin D-101 fits in purification of water-soluble oleuropein.

160. The authors believe that water accumulated on the surface of adhesion bridge neck from the sand-resin surface and atmosphere is a very factor to hot cracking tendency of resin coated sand.

161. Rosin modified alkyd resin prepared by soybean oil stock fatty acid - rosin - glycerin - pentaerythritol , which means fatty acid method.

162. The invention relates to polyphenyl methylsiloxane modified epoxy resin and a manufacturing method of an electronic packaging material thereof.

163. A new epoxy resin plant alongside the planned glass epoxy laminate factory will be set up in Jiangyin, Jiangsu province.

164. After hydrazinolysis, hydrazide resin (3 ) reacted further with substituted benzoyl chloride obtaining hydrazide resin (4).

165. Tiaogan gold oil by phenol - formaldehyde resin, drying oils, oil, etc.