1. Just the ingots, two feet high.

2. After various experiments, an ingot was cast in August 1913, containing around 13 percent chromium with a little manganese.

3. The silicon ingots are highly perfect single crystals and on the atomic scale the cutting has to proceed through breaking bonds.

4. The only castings found were ingots, so this seems to have been a metal refinery.

5. Around his neck he wore a gold ingot engraved with his birthday, a present from his sister.

6. They eat dumplings shaped like silver ingots, long rice noodles for long life, and boiled peanuts for conceiving sons.

7. His master granted him a small ingot of silver.

8. Iron Ingot need 8 dark iron ore smelting.

9. Planate unit price per m. t. for aluminum ingot.

10. The company owns self steel ingot,[/ingot.html] steels storehouse.

11. Finish operation a year many does steel ingot have bad in the leg go out?

12. Didst then the smith put an ingot upon his anvil, and lift his hammer, and didst then the Builder breathe upon the ingot, that it became gold.

13. The quantity of magnesium ingot is improved though fitting the system of remelting and refining.

14. Thus, it is necessary achieve an ingot mold to cast slabs to overcome the foregoing drawbacks.

15. Charge of a gold ingot to have 2 hours of purgatory is also a good time!

16. Or is this the time to bring home a few ingots[sentencedict.com], dig up the cellar and bury them under the floor?

17. It has three distinct stages of processing - bauxite mining, alumina refining and ingot smelting.

18. Research began on lead objects from the Roman era, lead ingots, and so on.

19. Based on the corresponding relationships simple method for analysis of ingot mold Life was proposed. In addition, the influence of ingot mold geometry on the ingot mold life was studied.

20. Temperature has little effect on convective heat transfer coefficient between ingot and combustion gas in regenerative soaking pit.

21. By means of the working conditions and load characteristics of Batch-type Aluminum Ingot Cooling Conveyor, figured out the major parameters and choose the suitable components for the system.

22. Moreover, the thermal conductivity of the same material as the ingot mold has been precisely measured in apparatus which is based on a method of direct electrical heating in the sample. The ...

23. The quality of pig obtained reaches the standards of clean steel scrap and ingot iron.

24. The procedure of thermit welding for repair of the ingot die is presented in the paper.

25. I saw one of the conventional steelworks: huge blast furnace, converter, ingot, mile of railway track.

26. The domestic logistics business mainly includes dairy block train, aluminum ingot block train, Liuqi block train and double-deck block train of Dahongmen logistics base and LCL business.

27. It is absolutely viable to prepare 6063-alloys by electrolyzing low titanium content aluminum ingot. The method of adding titanium by electrolyte is a new way with low cost and high quality.

28. Our company has several German production lines such as aluminum ingot melting line, mould making line, etc.

29. The utility model relates to a single crystal fused aluminum oxide ingot mould. The utility model is characterized in that the cavity of the aluminum oxide ingot mould is in a cone shape.

30. A new method was studied for the determination of Nickel in Lead ingot in nitre acid after the main part were separated by Lead Sulphate.

31. The octahedron steel ingot and V - anvil forging bar can effectively prevent cracks in crystal boundary.

32. Increasing the utilization ratio of the ingot is an important way to reduce the forging cost.

33. The rack of aluminum ingot stacker plays an important part in the process of Stacker.

34. The reason of 7475 alloy flat ingot crackle and loose combination are analysed.

35. She just stood there with an ingot in her hand -- it felt hard, cold and heavy.

36. The article elaborated our country aluminous ingot to produce the account of can rapid expansion.

37. The casting process of an aluminum ingot mold, with simple structure and high quality requirements, was introduced; it is a casting export to the United States.

38. Thus a high quality ingot with good surface finis. is. produced.

39. The quality and service performance of large cold roll produced by electroslag remelting(ESR) ingot can be obviously improved.

40. A new method to simulate directly and predict the formation process of shrinkage cavity,[http://] its final shape and position for steel castings and ingot was proposed using computer.

41. The technological parameters determine the metal pool profile and the grain size and orientation in the electroslag remelting process, and thus affect the the quality of the final ingot.

42. Putting some TiO2 into aluminum electrolyzer can make aluminum ingot produced by electrolysis containing low content titanium.

43. To be developed supply mainly includes chemical raw material, commodity, aluminum ingot and paper pulp from HuNan to SiChuan, and subsidiary agricultural products.

44. Jiaozi is oblate, similar in design to a shoe - shaped gold or silver ingot in ancient times.

45. As a result, it is possible to get a better discharge flow in the feeding zone of the ingot mold where the discharge device of molten steel is placed, in addition to less turbulence.

46. Such ingot mold, however, is able to produce slabs with a thickness that still requires considerably large machinery for the production line.

47. This paper analyzes the process and characteristics of making clip, describes the making process rules of the aluminum ingot packing clip,blemish existed and the solutions.

48. The factors that affect the porosity in transversally cast ingot are related, porosity is very detrimental to the mechanical properties and surface quality of sheet.

49. Above results will be helpful to improve the aluminum ingot machine.

50. From quality of melting metal, casting condition and casting equipment, the influence factors of crack in aluminium and its alloy slab ingot were analyzed, some suggestion have been drawn out.

51. In order to improve the liquation of MC5 cold roll blank and the strip quality(), the high temperature diffusion annealing of the ingot.

52. The three dimensional flow of metals during rolling of ingot with liquid core has been studied in the article. Here the influence of liquid core ratio on rolling was studied in particular.

53. This paper expounds the causes of the rapid extension of the production capacity of aluminum ingot in China.

54. So press ingot does the outlet after where after all?

55. Macro-segregation of a steel ingot in a rectangular mold with a riser was simulated and the calculation result was compared with that of an experiment.

56. The positive segregation in the upper center and the negative segregation in the exterior region of the ingot are found at the same time.

57. The steel ingot mold made of vanadium titanium vermicular graphitic cast iron has the best comprehensive property.

58. Objective : To make the dowel nucleus fusion model with self - cured acrylic resin ingot.

59. The surface and inner qualities of aluminum alloy ingot by electromagnetic casting (EMC) have been investigated and compared with those of the direct casting (DC) one.

60. Thus, it is necessary to achieve an ingot mold to cast slabs to overcome the foregoing drawbacks.

61. Scope of business: Aluminum ingot, aluminium moulding materials, aluminum goods, non - ferrous reasl and mineral products.

62. The effect of hexachloroethane degasser pretreatment on porosity formation in ultrasonic ingot is investigated.

63. The equiaxed grains move with the fluid and accumulate at the bottom center of the ingot during solidification. The cone-shape negative segregation forms after solidification.

64. Effect of filling ratio and melting speed on the quality of ESR ingot of H13 hot-work die steel was studied.

65. Iron ingot smelting furnace only in the BRD of the Iron on.

66. This paper studies the influence of the change of flow direction of cooling water at the botton of ingot mold and the mold material on the crack and the inner surface roughness of the ingot mold.

67. Moreover, the thermal conductivity of the same material as the ingot mold has been precisely measured in apparatus which is based on a method of direct electrical heating in the sample. The result...

68. Keeping pouring quality would prevent the ingot steel from forging bursting.

68. Wish you can benefit from our online sentence dictionary and make progress every day!

69. Ingot, Aluminium and Foils, Scrap, Stainless Steels, Minerals Minerals and Refractories.

70. Because the surface of pipe is oxidised , it will not weld up during hot working, and so a considerable portion of the ingot would have to be scrapped.

71. Once the crucible cooled, it contained a glass ingot ready to be sent to another workshop for remelting.

72. The new preparation method of Al-Ti-C grain refiner was studied with aluminium ingot, potassium hexafluorotitanate, aluminium powder, hexachloroethane and carbon powder.

73. While the indium absorbed by a muriatic acid is manufactured into the finished product of a metal indium ingot after iron-removing and replacement processing.

74. A method for determination of Al, Ag , Bi , Cu , Cd , Co , Fe , Ni , Pb , Mg , Sn, Se, Zn in tellurium ingot by ICP AES were studied.

75. The utility model adds a water cooling system to uniformly cool an aluminum ingot of the crystallizing wheel to improve the quality of the aluminum ingot.

76. The shape of jiao zi is like gold ingot from ancient China.

77. This paper introduces the application of the flame temperature adjustable high velocity burner and the pulse type system of temperature adjustable in aluminum ingot heating furnace.

78. A staff member here told me there is a big gold ingot around here.

79. The texture formation in ingot after hot deformation appears to be associated with the presence of diffusion controlled dislocation glide along basal plane in crystals.

80. After the statistical analysis of the heating specification on the hot-short ingot, we found that the heating specification of hot ingot would probably cause the ingot hot short.

81. The paper analyzes the reason for the vibrating of heavy foundry for aluminum ingot, and puts forward some improving measures.

82. According to the functional requirements of the Batch-type Aluminum Ingot Cooling Conveyor, designed out the hydraulic system schematic diagram.

83. Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron and Wrought Iron.

84. Al melting is high energy consumption industry, energy cost is a fixed ratio in costs, Alumina, Aluminium ingot are the main energy-consumption products.

85. Advantages: it can destroy the ingot casting, steel grain refinement, and eliminating the defect in microstructure, thus making steel tissue close-grained, with improved mechanical properties.

86. A system for transferring molten metal from a vessel and into one or more of a ladle, ingot mold, launder, feed die cast machine or other structure is disclosed.

87. The invention discloses a technology for the directional solidification growth of polycrystalline silicon ingot, belonging to the preparation of semiconductor material silicon crystal.

88. Casting technology: an aluminum ingot is pressed via a pressure of62.3MN into a wheel hub under the thermal state.

89. A time table for transferring C 8412 steel ingot is successfully drawn up.

90. For grinding mill roll, casting, ingot steel, machineries, bearing and piston ring etc.

91. In most of the domestic aluminum ingot production enterprises aluminum ingot packing is done manually, which not only increases the costs, but also exists the physical safety hazards.

92. The gold ingot , silver ingot and notes are ancient currencies.

93. In bottom pouring, the molten steel is poured into a central trumpet, from where it flows through runners to the bottom of a number of ingot moulds.

94. Have celebrated the New Year, have given everybody a gold ingot!

95. The yield and utilization ratio of steel ingot has greatly increased by modern metallurgical techniques.

96. By comparison with manual arc welding, it is found that the thermit welding is a efficiency, energy saving and high quality process for repair welding of steel ingot die.

97. Iron ingot is formed through the black iron ore smelting, ore ratio of 8: 1.

98. Thus a high quality ingot with good surface finish is produced.

99. The service life of the boron surface alloying grey cast iron ingot mold is 43% longer than that of high Mn low si grey cast iron ingot mold.

100. The inclusions distribution in ingot was examined by means of microscopy.

101. To reduce hydrogen and solid non - metal inclusion in aluminum ingot, we designed a kind of on -line air- removing device with high efficiency and good cleaning effect.

102. This paper studies the relationship between the rheological and technological properties of the coating for ferroalloy ingot mold.

103. During the process of rolling ingot with a liquid core the effect of the liquid core ratio on different factors of metal deformation has been investigated by a simulation experiment.

104. This paper describes the shape of truncated pyramid bottom ingot and its effect on slab yield.

105. Macrosegregation of boron in vacuum melting pouring ingot of GH901 alloy is determined by 3 characteristics of boron in the GH901 alloy.

106. Five years later, genghis khan's dabie - sulu ingot pike towards JinGuo oppressors.

107. As it was melting away I hurried off to finish welding a large ingot mold from heavy angle iron .

108. Heating chamber is pivotal part of the polycrystalline silicon ingot production furnace.

109. An explanation is also given to the mechanism of CREM process on restraining macro-segregation of solute elements in 7075 aluminum alloy ingot by DC cast.

110. The limitation of the conventional design of the heavy duty ingot mold has been analyzed in this article.

111. Wool spinning industry also faces the problem pressing ingot like spinning industry.

112. The internal defects of steel ingot have bigger influence to internal quality of block.

113. The ingot mold made of vanadium titanium vermicular graphitic cast iron has the best comprehensive property.

114. The infrared thermometer is mounted on the mechanical scanning mechanism so as to bi-dimensionally scan the surface of the casting ingot.