1. John came out with an unexpected shaft of wit/wisdom.

2. He was wounded by a shaft.

3. A fire broke out in the main lift shaft.

4. A piston links to a drive shaft by means of a connecting rod.

5. The depth of the shaft is 520 yards.

6. This is the shaft of a steam engine.

6. Wish you will love and make progress everyday!

7. The equipment was taken down the shaft in pieces.

8. A shaft of moonlight fell on the lake.

9. A brilliant shaft of sunlight burst through the doorway.

10. A shaft of light came through the open door.

11. The lathe turns off a shaft in just one minute.

12. A residue can build up on the hair shaft, leaving the hair limp and dull looking.

13. We were given the shaft, and lost a lot of money.

14. Position your hands correctly on the shaft of the club.

15. Once the ventilator shaft became blocked, the warehouse quickly filled with fumes.

16. In course of sinking the well - shaft they came upon a deposit of a very rare mineral.

17. A crew was sent down the shaft to close it off and bail out all the water.

18. But the shaft of light didn't waver.

19. The shaft spins at 950 revolutions per minute.

20. A shaft of light came in through a hole in the corrugated iron roof.

21. He was found dead at the bottom of a lift shaft.

22. They lowered him down to the bottom of the deep shaft.

23. After years of loyal service, his boss gave him the shaft by firing him just before he would have qualified for a pension.

24. In tin mining today, workers excavate tunnels horizontally from a vertical shaft.

25. For the last 18 months miners have cut a face to develop a new shaft 400 metres down.

26. The workers go down to the tunnels through a vertical shaft sunk from the top of the cliff.

27. A worker was decapitated when a lift plummeted down the shaft on top of him.

28. She slowly opened her eyes, only to be dazzled by a strong shaft of sunlight.

29. One reads books in order to gain the privilege of living more than one life. People who don't read are trapped in a mine shaft, even if they think the sun is shining. Garrison Keillor 

30. Looking up, he found he was standing under a short vertical shaft, at the top of which was another trapdoor.

1. John came out with an unexpected shaft of wit/wisdom.

2. He was wounded by a shaft.

3. A fire broke out in the main lift shaft.

4. A piston links to a drive shaft by means of a connecting rod.

5. He was found dead at the bottom of a lift shaft.

6. This is the shaft of a steam engine.

6. Wish you will love and make progress everyday!

7. Once the ventilator shaft became blocked, the warehouse quickly filled with fumes.

8. In course of sinking the well - shaft they came upon a deposit of a very rare mineral.

31. A shaft of brilliant sunlight shone through the dusty attic window.

32. Ride the train to the ventilation shaft.

33. Copper shaft cable will be optical fibre cables.

34. A counter on the moor shaft locates the rider.

35. The driving plate matches to the transmitting shaft.

36. To bore ( a shaft ) with a trepan./shaft.html

37. Find the shaft and hood of the clitoris.

38. Application: For screw shaft, grinding of polishing industries.

39. The friction disk is splined to the clutch shaft.

40. Steering intermediate shaft to dash panel seal.

41. Strong load capacity of shaft , service life long.

42. The main shaft may be deformed.

43. Install pitman shaft and side cover in the housing.

44. Howerer, under heavy load the shaft may deflect excessively.

45. Commonly used shaft steelwork styles are compared in this paper before the right scheme applying rail steelworks is adopted.

46. A rolling bearing is positioned on the driven shaft and in an internal hole of the driven wheel.

47. Based on plastoelasticity mechanics and surrounding rock-supporting principle, the stability of shaft was analyzed, and calculation formula of stress, displacement and support thickness were derived.

48. Two of the pillars are situated on the covered inner courtyard of the firehouse, while the third is located beside an external support point and consists of a panoramic lift shaft.

49. A shaft on the piston forms the armature of a coil.

50. The working principle of a bootstrap air cycle refrigeration components is described in detail, such as compressor, turbine, shaft and internal heat exchanger.

51. With greater axial and radial load rating capacity, good replaceability of components. The shaft can be adjusted through external hexogan then to adjust the axial part dimension.

52. And the horsepower of surface motor is ascertained through anticipating the operating power of motor shaft according to the power of lifting liquid and rotational speed of PCP.

53. However, SOTX Ti series racquets really have a lump of Titanium in the built-in T-joint that applies Three-stage method for combing racquets' frame and shaft, updated from Two-stage method.

54. The Hammer scale, which combines cortical continuity, the loss of a visible fracture line, and callus size, was found to correlate poorly with tibial shaft fracture stability.

55. Head shaft is one of the main load- carrying parts in chain conveyor. Finite element analysis and optimal design of the head shaft are conducted and its optimum dimensions are obtained.

56. The rotating shaft is also provided with an operating rod.

57. When the pump shaft and the packing heat generated by the friction depends on water-sealed tube to live on the water to seal circle to fill cool!

58. Usage: suitable for precise lathing of rotor outer circle and commutator that with big shaft diameter and V block can not be used.

59. The failure mechanism of lead bronze shaft sleeves with many pits on their internal surface is analyzed by optical metallograph and EPMA.

60. An axis external circle simulates a reference shaft line to realize the principle of the measurement of the plane to the symmetrical characteristic of the reference axis.

61. Axial motion and misalignment (radial and angular offset) between the encoder shaft and the drive shaft are compensated by the coupling.

62. According to Oil Daily reports that the new low-friction characteristics of wavy liquid seal is formed on the surface of the shaft or by a sinusoidal waveform constitute special Lamiaceae.

63. In production of Spot welding machine of P131 transmission Shaft pressed assembly, there is a high requirement for the angle between two parts pressed in one tube.

64. Gear A , at the end of the drive shaft, and gear B, on the countershaft, are in constant mesh.

65. We require marine scrap like used propeller shaft, tail shaft, spare shaft, marine used equipments, used anchor chain, used shafting, used marine engine, used marine spares.

66. The general procedures for constructing subway are as follows: first excavate the shaft, then horizontal pass[/shaft.html], finally ingate.

67. Sparated Bearing block for main transmission shaft Easy for maintenance and fix.

68. The shaft is connected with the cutting board movably, the two ends of the shaft are bent to insert in the holes arranged on the cutting board.

69. Lube lines are extended through shaft guards for easy accessibility.

70. Torque sensor can be used successfully in measuring friction torque between main shaft and motor in the non-load mechanical seal test.

71. The adjusting wheel is fixed on the rotating shaft, and the outer circumference of the adjusting wheel is provided with teeth of a first sequence.

72. The divided-flow two-level turbine engine with two pumps is composed of a turbine, a turbine shaft, a two-level booster pump wheel, a guide pulley and the expansion chamber shell.

73. With the proposed full-order observer, the flux linkage of motor can be accurately observed and high performance achieved without shaft encoder.

74. Swing shaft test bench is used to test alignment, calibration and accuracy of system under simulating swing condition in laboratory.

75. This accounts for the modern forms limb (limber has excrescent b, regardless of whether it means "shaft," "holes in timber," or "pliable"; none of them is related to limb) and crumb.

76. The nonmetal material insulating part is an inner insulating sleeve of the main shaft, which is sleeved at the lower part of the rotor driving shaft.

77. Simple cycle gas turbines are typically used for shaft horsepower applications without recovery of exhaust heat.

78. The inner race is keyed to the shaft. The outer race has h7 tolerance and should be fitted in housing with a k7 tolerance. Additional side notches provide for positive torque transmission.

79. Special radial play or shaft face clearance requirement could be made as specified in orders.

80. The section curve equation of main stirring shaft is obtained by deducting the screw profile curve formation process of the stirring kneader.

81. The invented generator comprises rotor on shaft fixed in body case as a rotatable bearing, and stator (8).

82. The design method mentioned has been beneficial in practice and provided a new basis for designing the same type of shaft coupling.

83. The setting optimization principle of compressible tie-in is brought forward; and it has important guidance meaning to design compressible shaft wall reasonably.

84. Design principle and construction technology of big calibre bedrock bench mark of shaft style are presented.

85. Elephants in zoos and circuses are typically moved with a tool called an ankus, a nasty-looking wooden shaft with a metal hook protruding from the top. It's banned at the sanctuary.

86. The hairspring produces the force to produce recovering force on the rotating shaft to ensure it coming back the initial point.

87. The shaft of the turbine is coupled to the rotor of the generator.

88. The utility model discloses a hinge for an insulating cover of a steel ladle, which comprises a fixed slot, a rotating slot, a rotating shaft, a pin key, a pin slot, and a supporting arm.

89. We want to buy Camshafts , Rockerarm, Rocker Shaft, General Casting Automotive Parts, Components and Spares.

90. The motor housing encloses the armature and pole pieces, holds the bearings that support the armature shaft, and provides the terminals for connecting the motor to the rest of the staring system.

91. During the process of shaft excavation, especially in threading coal formation which have outburst tendency, coal (rock) and gas outburst bring much difficulty to coal mine.

92. The main shaft of mining entry - driving machine broken at earlier time after for a certain time.

93. Objective : To explore the advance in the treatment of humerus shaft fracture.

94. A fender is arranged on the top of the apical shaft of the jack.

95. The propeller shaft frequency is one of the important target recognition features for passive sonar.

96. Shaft to ventilation and excavation, repair qanat soil when used.

96. try its best to gather and build good sentences.

97. Moreover, the wheel support is fitted with a flange with an upper articulation point connected to the cervical arm and a lower articulation point that is connected to aforementioned shaft.

98. Although I know this, we are happy to get the shaft , just for the little so called "practical", the result can be thinking out.

99. GK serial helical bevel geared motor has high efficiency and long service life gear. It has feet panels arrangement, flange arrangement and shaft arrangement.

100. His plans involve building an air shaft through the roof of the control center equipped with a solar powered fan to draw air deeper into the complex.

101. An insect appendage consists typically of a limb base and a shaft.

102. This article presents the calculating formula of the caster angle of cardan shaft and discusses principles for designing rational cardan shaft in the skew rolling mill.

103. Shaft Column: Flanged, heavy wrought steel pipe encases the pump shaft.

104. A plurality of oil passages are formed in a shaft body of a rocker shaft, which partially constitutes a valve drive system of an internal combustion engine.

105. The importance for the mine to strengthen the maintenance of the air return way and the points needing attention in designing and allocating the ventilation shaft are pointed out.

106. Rotary engine: Internal-combustion engine in which the combustion chambers and cylinders rotate with the driven shaft around a fixed control shaft to which pistons are attached.

107. This thesis introduces the method of optimal design for the circular arc transition radius of the shaft collar of a circular shaft with ANSYS, which has an important use value in engineering practice.

108. The glans begins at the tip of the shaft and continues under the surface to where the other end connects to the suspensory ligament at the pubic mound.

109. And the Fuzzy-follower is applied in shaft bottom coal conveyor of a medium-sized coal mine and gives good results. Thus, it solves the problem of power balance of double-motor driving system.

110. The eccentric shaft vibration exciter and partial block help to adjust amplitude.

111. The loads including: the earth pressure changed by the depth, the lyophobic additional force changed by the time, and the weight of the shaft sidewall.

112. The characters of the electric drive of crank shaft press were studied from the viewpoint of the press working behavior. Factors related to the selection of eletric motor were also studied.

113. This machinery is a new type horizontal smash mechanism. It is equipped with kit rounds at the fore shaft, so it won't be blocked on the operation process.

114. Cam shaft and tappet body are important parts of engine, their status will influence directly whether or not the engine could make normal operation.

115. Results Femoral shaft edges were obtained from both frontal and lateral X ray images successfully, and then datum line was se...

116. In the coal shaft the working - men pushed the coal cars sullenly.

117. The problem i s resolved after space layout of the propelling shaft readjusted.

118. The WG series, (double guided wedge parallel grippers), achieves synchronous motion with a double acting piston attached via the piston shaft to a double sided wedge.

119. I know that telephone signal must have been shielded in the elevator shaft, so what did you do then?

120. The balance shaft has a first end for connection to the drive sprocket and a center bore.

121. The failure of a gear shaft was analyzed by SEM analysis, macrograph, metallographical examination, mechanical test, chemical analysis and etc.

122. The purpose of this paper is to find the distribution laws of the shear force between vertical shaft and surface soil, and to lay a foundation for mechanical model of shaft in soil.

123. The sound of truth will rend the air a shaft of lightening.

124. The actuator drives the shaft coupling and valve cartridge to adjust the material flow.

125. While holding the release button depressed , pull the knob and shaft out of the headlamp switch.

126. This shaft coupling is specified for application in rolling machine to transmit heavy impact torque. It consists of two half couplings and rubber elastic components.

126.

127. Inspection machining dimension of propeller shaft ( intermediate shaft or counter shaft ).

128. The blade in the intermediate shaft adopts box plate type structure, to improve production efficiency; the blade adopts Q345 wear-resistant material, to extend the service life.

129. Schmidt parallel shaft coupling is a kind of coupling with unique structure and good transmission performance.

130. CFY submerged pumps mainly consist of pump casting, pump cover, impeller, shaft, flexible coupling, pipe flanges, column pipe, outlet pipe, bearing frame, floor, motor frame and other parts.

131. Bearings are located between the first end of the torsion bar and the center bore of the balance shaft, to center the torsion bar within the balance shaft.

132. Start of volume production of the world's smallest drawn cup needle roller bearing (2 mm shaft diameter) for a motor application in electronics manufacturing.

133. When a tactical air strike struck the building beside it, experimental failures were propelled into the ventilation shaft; apparently killing everyone inside.

134. According to the clinical experience, the femur neck and inferolateral shaft of femur of the lesser trochanter are all the catagmatic range.

135. Full rated output is available at the output shaft of the unit.

136. Yokes on both ends of the middle shaft lie on the same phase.

137. In the generator-motor system for hoisting in mine shaft exists a self-sustained oscillation caused by nonlinearity of excitation saturation of generator.

138. The starter drive gear is mounted on the armature shaft.

139. The double-bucket hoist system used in the main shaft at Fank ou Mine is a thyristor DC driving system made by Symons Company. The location control loop used is a digital control technology.

140. The output signal of an optical encoder mounted on the shaft of a motor is an example of a digital pulse train signal, as shown in Figure 10.5.

141. Make sure that the top roller bearing, the lubrication of the shaft seating.

142. C. Shaft coupling on the transmission shaft should be connected with rubber shaft coupling on gear reducer.

143. Trials of a new smelting reduction process for ferrochromium manufacture in shaft furnace with carbon bearing chrome-ore pellet was carried out by the authors.

144. The invention discloses a caliper brake for a bicycle. The caliper brake comprises a left brake fork, a right brake fork, a penetrating shaft and a return spring.

145. I rotary kiln production plant structure strong, stable operation, high-quality products from the kiln, and offers advanced efficient shaft preheater, five cyclone preheater.

146. The invention discloses a kind of vibration mirror type laser scanning system, which includes a laser, a focusing model, an X shaft scanning head and a Y shaft scanning head.

147. Because the transformation of electric net load is very complex, the impulse response on the generator shaft system is stochastic, paroxysmal and multi formed.

148. The flexible mount and integral hub shaft reduces cost, simplifies installation and reduces the overall depth by eliminating the traditional flange adapter and flexible coupling.

149. AIR CYCLE MACHINE, A compressor and turbine on a common shaft for cooling the air in an air conditioning system.

150. It is inferred that low strength and bad ductility which is induced by abnormal heat treatment are the cause of brittle fracture happening for the gear shaft.

151. The model can simulate operation conditions of the tunnel and solve key technical problems of ventilation shaft.

152. A gray brick tunnel, dimly lighted, led to the elevator shaft.

153. Most jet engines have an electric starter motor, and this motor could spin the turbine's shaft under water, Hawkes suggests.

154. By using this fixture, the slimness shaft with any length can be machined.

155. In this way at the ends of the shaft 1 layers or lines of welding can be superimposed on each other to form barriers 4.

156. Main wearing part is alloy anti-friction material. The mixing shaft is heat engineering treated.

157. A manservant , Lotung, who was the brother of Lota, sat on the outside in Mr. Yao's cart, one leg crossed on the shaft and one left dangling.

158. This article introduces high resilience and wide ket turning tool with fine lathe tool made by own against processing fine long shaft, also process craft and pay attention to a number of question.

159. The paper reports the support technique of inclined shaft crossing surface soil with swelling and watering, in this case the stability of whole support system is key factor for successful control.

160. On a basis of investigations and studies, an improved design for the shaft sealing structure and the integral structure of Model 150 Slurry Pump is worked out in this article.

161. This is largely because the handle makes the gear axle with obliqur teeth drive gear shaft with obliqur to move, which makes drilling die plate with guide mechanism and drill sleeve to work elamply.

162. An in-situ test of large industrial water primps characteristics, which is a combination of thermodynamical method and motor shaft power measurement, is described in this paper.

163. To observe the clinical effect of dilatable bone nail on humerus shaft fracture.

164. A real-time data acquisition system based on PCI Bus was introduced. The system was designed for single-ring absolute optical shaft encoder.

165. From two aspects of theory and practice, this article more systematically expounded the peak sample transformer rotating shaft cotangent coding scheme and its engineering design principles.

166. Objective: To analyse the best method in the treatment of open fractures of tibia fibular shaft.

167. Dead - Burned Magnesite is produced with selected natural magnesite through purifying calcining in shaft kiln.

168. Elegant enclosure made by valuable log, together with gilding vertical shaft and beautiful curlicue shows magnificence.

169. These factors, which include slurrys preparation, circulation, depuration and so on, would influence drilling speed, bore quality, exertion of pile shaft resistance and base resistance.

170. At a Southern Indiana coal mine, an accident at an air shaft kills three people.

171. Windmill : Machine for harnessing the energy of the wind using sails mounted on a rotating shaft.

172. An experimental investigation of the shrouded centrifugal backswept impeller flow field has been conducted at off-design flow using Laser Doppler Velocimeter (LDV) and shaft encoder.

173. A universal class of 3D-graph in oil reservoir simulation software is introduced. Also, it puts forward a connection algorithm of cylinder based on intersected central shaft in the class.

174. The auxiliary shaft topsoil adopted ordinary construction and drainages in hygrometric well.

175. The armature shaft shall not be bent more than 0.003 in.

176. The warriors, armor-clad , holding long - shaft weapons are probably the main body of the formation and represent the principal force.

177. The piston is connected to the crank shaft by a connecting rod.

178. T 764 Encoder, 10 mm hollow through shaft, Quadrature output, Push pull output circuit.

179. Use high strength ceramic shaft, reliable and durable, low operating noise.

180. Specializing in manufacturing the straight gear, bevel gear, spiral gear , gear shaft, wheel and worm shaft.

181. In this paper the structure, operating principle, the design of hardware circuit and the feature software of the 24-bit photoelectric shaft encoder are expounded systematically.

182. Then punch a pinhole into the opposite side high enough so that the little shaft of light will miss your head.

183. The punching settlement is used as the initial parameter for calculating pile shaft compression settlement.

184. It originates from the wall of the cloaca directly in front of the vent on the belly side, and curls backwards so the shaft and head lies directly beneath the vent opening.

185. The tools introduced include drill, millstones, reamer, grinding head, grinding wheel, grinding shaft.

186. As the production capacity of XINGGANG shaft furnace has exceeded the designed capacity,[http:///shaft.html] so its original thermal balance was destroyed.

187. The appearance of mesosphere solidification and shaft direction solidification was infaust to obtain compact roll structures, that accelerated the roll to produce crack.

188. An assembly step matching the shaft shoulder of the mainshaft is positioned on the shaft sleeve and a fixed gap forms between the shaft sleeve step and the water-tight plate.

189. Self-aligning Ball Bearings are particularly suitable for applications where misalignment occurs from errors in mounting or from shaft deflection.

190. Affected by electromagnetism and structure, the rotor shaft of big length to diameter ratio high power density asynchronous motor shows low intensity and bad rigidity.

191. A small switching gear, a contrate gear shaft respectively fixedly connected with a big chain wheel and a big gear, a speed change gear set and a generator set are arranged in the casing.

192. Simplicity of design eliminates pump priming, troublesome shaft sealing problems and the inherent maintenance costs of mechanical seals.

193. Three- axle motor vehicle differential gear damage, such as, the rear axle differential damage to any one, can be the bridge and axle shaft removed, continue to operate.

194. The driving direction of the oil cylinder (5) is parallel to the connecting line of shaft centers of the air extruding roller (2) and the double-layer roll combining roller (1).

195. There was a family of cats on the rooftop there, making their home in the ventilation shaft.

196. In drill operation , excentric shaft connection has certain inclining prevention function.

197. A lawn aerator has a series of tine assemblies spaced along a driven shaft driven by a motor.

198. Cottonwood, maple, pinewood, birch , miscellaneous tree, trimmed log or heart wood of clamp - shaft remained.

199. BMD was measured at the posteroanterior lumbar spine 1-4, left femoral neck, femoral shaft, trochanter and total hip by dual-energy x-ray absorptiometry (DXA).

200. The analysis of fracture failure for electro-motor shaft was explored with the chemical analysis, macroanalysis, microanalysis and metallographical inspection method.

201. Pile shaft force and pile side resistance had something closed to do with pile top loading, characteristics of frozen soil around the pile and ground temperature around the pile.

202. Even the air shaft is a masterpiece, tiled in shades of azure, deep-tinted at the top and gradually lightening to spread sun evenly to all floors.

203. Breaker This breaker by the electrical machinery, the speed reducer, turns limits the shaft coupling brokenly, the breaker fixed plate, the breaker rotor plate, the main axle is composed.

204. The electric brake of AC shaft hoist is an important part on hoisting technics low frequencies power generation brake and power are widely used in the shaft hoist of AC asynchronous drive at present.

205. Commonly used shaft steelwork styles are compared inpaper the right scheme applying rail steelworks is adopted.

206. Electric dynamometer measurements using a variety of electrical power machinery output shaft torque, combined with speed to determine the power equipment.

207. In view of the property of slurry and the peculiarity of true soil, the mechanism of slurry dado with concrete curtain wall method in shaft excavation has been studied in this paper.

208. In changeful wind conditions and load fluctuation maximizes the stability of shaft output.

209. For this application, the bucket feed mechanism, RBC media, and Bio-Clarifier shaft are installed in concrete tankage conforming to the shape and dimensions of the Bio-Module steel tankage.

210. It is much more advantageous to adopt a taper straight-side triangular spline than an involute one, for example, in linking up big gear of wheel bub reductor with axle shaft in heavy duty trucks.

211. The mathematical model of wind turbine applied in the calculation takes account of characteristics of the blades, hub, gearbox, shaft and asynchronous generator.

212. In this paper, a method to determine and calculate terminal test load is pointed out for adjusting brake rope parachute gear for cage hoisting in auxiliary shaft.

213. An average output power of the converter shaft must reach the Max.

214. This paper give an advice that we can realize closed cycle control of feeding shaft by proportional valve and linear grid ruler instead of servo amplifier and servo motor.

215. The black thing on the shaft is a stick-on rubber foot with a hole poked through it, of the kind you put on the bottom of electronic project boxes and such.

216. The imported bearing with high precision[ ], to assure the precision of the main shaft.

217. Special thanks to professor Meng to my calculation of the casting ladle shaft and maximum torque, check calculation.

218. Gas external combustion type lime kiln belongs in a shaft kiln of gas combustion type.

219. The factory is the production of large machine screw , light bars, bars and switching products sentinel longer shaft production enterprises.

220. Tension control system adopted tension shaft sensor, realized the closed loop control.

221. Put in the drawbar to the spindle shaft center hole.

222. Cause of high vibrated value of turbo-expander gearbox high-speed shaft was analysed in this paper. solution and attention problems were put forward.

223. The transmission shaft and small exhaust amount positive motor tricycle has the advantages of compact structure, stable operation(), complete function and strong climbing ability.

224. A hot simulation equipment of COREX shaft and its experimental results are introduced.

225. The ventilation shaft is provided at the end inside the powerhouse to enable a cross ventilation through the underground powerhouse cavern system.

226. The die design critical points and advanced pressing process of board spring on shaft steamer dynamotor.

227. Horizontal double sided NC combined drilling machine is specially designed for the machining of main shaft journal hole and crank arm journal straight oil hole of crankshaft with six cylinders.

228. Different nacelle with deeper ross - section and intake over propeller shaft.

229. It was in the way the red light, breaking at the close from under a low somber sky, reached out in a long shaft and played over old wainscots, old tapestry, old gold , old color.

230. A fire rages out of control from a ventilation shaft at the Pike River Mine in Greymouth, New Zealand.

231. By removing a projecting body of the interior fa?ade, it was possible to place the new access core in the central space, which was an air shaft by the party wall on the right.

232. At present, in mostly regulation drive systems, the mostly method is to install a position sensor in the rotor shaft.

233. As the hair fiber ages and gets weathered by exposure to pollution and through washing so the cuticle layer loses its shiny appearance and the cuticle scales flake away from the hair shaft.

234. Small straight teeth casting ladle available high safety revolving shaft, a brake control vertical torque, doesn't exist kowtow phenomenon.

235. The vibration and noise level of speed reciprocated engine can be remarkably reduced with balanced shaft.

236. The drive system is comprised of at least one balance shaft and a torsion bar.

237. It has directive significance to the water hazard prevention of mine shaft.

238. The spring shaft of the spring is connected with an input shaft of a transmission, and an output shaft of the transmission is connected with a rotor shaft of the generator.

239. Police say the victims were in a basket used for transportation up and down the 600-foot air shaft.

240. All have a circular, motor-driven base whose slewing is unlimited by the length of the worm - gear shaft common on smaller cranes.

241. The metal bar inserted in collar came from a motor shaft which is 2 mm in diameter.

242. The clutch disc has a splined hub that fits over splines on the transmission input shaft.

243. The child was reportedly stuck between an elevator car and the elevator shaft at a residential dwelling.

244. Main shaft adopts center automatic lubrication system to free operator from the worry of negligent lubrication and basic part damage, can effectively ensure machine durability.

245. This engine applies the main shaft and countershaft whose module and intensity are increased. These improvement guarantee the reliability of the transmission and the output the torque.

246. He sighted one man whose crossbow was aimed, and drove off a humming shaft that took the man in the wrist and pierced through flesh and gristle up to his elbow.

246.

247. The research and the detailed process of design for the two-speed resolver shaft encoder is introduced in this paper.

248. The result shows that the system satisfies data acquisition of single-ring absolute optical shaft encoder.

249. The main products are sprocket for motorcycle ( vehicle ) and crank - shaft for general machinery.

250. A model could be used before insertion of artificial femoral shaft because of the defects of femoral neck and femoral calcar.

251. Plunger shaft adopts integral structure, making installation easier and more reliable.

252. The outer tine assemblies adjacent to the ends of the driven shaft are rotatably mounted to the driven shaft.

253. All transmission shaft is spline connection, with large transfer torque and reliable performance.

254. On this particular turbocharger turbine wheel I used the inner races of two ball bearings to prevent the shaft from moving axially.

255. Whether or not sinking platform rope can be used as guide rope in shaft sinking is an issue that is being argued and worth to be discussed.

256. He is like a moonbeam like a shaft of silver.

257. Shaft coupling : in the Block reducer and gear is used between security company axle vehicles.

258. Clean the contact area of the agitator shaft and sealing shaft.

259. Theoretical analysis is used to analyze shaft drilling lining's vertical stability problem in floating and dropping phases, its stable equilibrium is proved.

260. In developing countries, tibial shaft fractures are frequently stabilised using Surgical Implant Generation Network ( SIGN ) nails.

261. Objective To treat femur shaft fracture with U - shaped plate.

262. There are eccentric wheel, rubber software, main shaft and shaft - bearing in the vibrating chamber.

263. This text takes a main shaft of analyzing and designing the stock sale system of the enterprise, provides a design and technological procedure of the stock sale system.

264. A buffer is placed between the dynamic shaft and friction wheel, which may be a very good method to solve the problem.

265. EA mounted on the either end of rotor shaft can generate impulse excitation force or simple harmonic excitation force with different frequency.

266. The damage of the derrick was due to the careless handling of the ship's crew in lowering the derrick, causing the topper to override the ratchet wheel and foul onto the topping winch drum shaft.

267. On each landing, opposite the lift - shaft, the poster with the enormous face gazed from the wall.

268. A screw shaft tube boring process professional cutter is provided, which comprises a shank, a blade and a jbckscrew.

269. Turn the wiper module over and remove the nut that secures the wiper motor crank arm to the wiper motor output shaft .

270. The hollow sealed cylinder body matches with the driving shaft to carry a filter plate and the filter cake adsorbed by the filter plate.

271. Gear: Machine component consisting of a toothed wheel attached to a rotating shaft.

272. The fine grating photoelectric shaft encoder based on the Moire fringe signal has the advantages of high accuracy, high response frequency and easily realized miniaturization.

273. The prop shaft vibrated like mad and shook the exhaust mounting loose.

274. In addition, using the cylindrical tank, the purge gas mainly congregates around the rotational shaft, and swirl always occurs, which is disadvantage to the degassing of hydrogen.

275. This paper has concluded an equation of the balanced torque about the electrical shaft system with open variable resistor, and has analyzed the Characteristic of the balanced torque.

276. New air bearing-rotor system is applied to technological rebuild of the shaft system in air cycle refrigerator which uses the conventional rolling bearing-rotor structure.

277. The rolling device is adopted clipping device with air expansion core shaft.

278. A new type of conveyance receiver has been developed for the winding system of vertical shaft.

279. The first step is to close all vents and openings at the top of the hoistway to prevent water from entering the elevator shaft.

280. Main shaft adopts automatic returning lubrication system to free operator from the worry of negligent lubrication and basic part damage.

281. Objective : To investigate the effect of intramedullary interlocking nail on nonunion and refracture of femoral shaft.

282. Resolution: the replacement of wear of the cardan shaft fork link for the ball.

283. It is applied on motors, motorcars, transmission shaft,[ ] gear axle and so on.

284. The motor shaft penetrates the planar toothed cutter head and the rotating blades are flat, cross shaped or Y-shaped.

285. Based on researching the shaft bearing replacer, this paper built the models of electromagnetic field and vortex density in bearing race snap being induction heating.

286. A two-step forging approach was taken in the production of GH4169 turboshaft of an engine, which was an integration of a disk and a shaft.

287. The classification, naming and field description are introduced of the Tertiary and Quaternary rocks from monitoring shaft hole.

288. They made the lampstand of pure gold and hammered it out, base and shaft; its flowerlike cups, buds and blossoms were of one piece with it.

289. Limited weight and dimensions are possible by the monobloc industrial design type with the rotor directly assembled on the motor shaft.

290. In this plate photography of the elevator shaft scene, the safety harness suspending Ewan McGregor ( Obi -Wan Kenobi) is clearly visible. It would be digitally removed in the final frame.

291. The system includes main motor, main reduction gearbox, transmission shaft ect.

292. Blow - out proof shaft, retained with unique Guide Bar System.