(1) The rice dampened and molded during the summer rains.

(2) Molded plastic is almost indestructible, but scuffs easily.

(3) Each variety is molded into distinctive shapes.

(4) Sculpted or molded objects are best seen in the round.

(5) That kind of plastic can be molded into any shape.

(6) Provisions of the Constitution are developed and molded by judicial decisions.

(7) By mid-century(), Californians Charles and Ray Eames had molded their plastic chaise for a 1948 museum competition.

(8) The style of the newscast is often molded by the writing.

(9) The students came up with the stories, molded the characters and then shot the short films.

(10) He had molded a statue.

(11) Die out the molded plastic before you paint it.

(12) Wax is molded into candles.

(13) His cold character was molded by hardship.

(14) He molded his style upon Macaulay.

(15) Molded and fabricated products of ebonite and soft rubber as well as hand-made rubber products are shown along with vulcanization technology, testing and inspections, measurements and standards.

(16) See Air Circuit Breaker, Main Breaker, Molded Case Circuit Breaker and Power Circuit Breaker.

(17) Silicon rectifier. Case molded plastic. Maximum recurrent peak reverse voltage 200 V. Maximum average forward rectified current 1.0 A.

(18) Silicon rectifier. Case molded plastic. Maximum recurrent peak reverse voltage 100 V. Maximum average forward rectified current 1.0 A.

(19) The molded cement base surface, or by the construction elevation cannot use wear-resistant occasions, liquid curing agent is a new choice of ground protection.

(20) Silicon rectifier. Case molded plastic. Maximum recurrent peak reverse voltage 1000 V. Maximum average forward rectified current 1.0 A.

(21) Silicon rectifier. Case molded plastic. Maximum recurrent peak reverse voltage 1600 V. Maximum average forward rectified current 1.0 A.

(22) While ABS is molded, melted polymer can not be filled in the micro-gear cavity under any parameters group from the orthogonal list.

(23) The compounded material is then injection molded into vaginal rings.

(24) A fan at my window blew over a block of ice molded in a bowl in my freezer.

(25) Half the people in the car were wearing sneakers with splashy designs on them and molded soles that looked like gravy boats.

(26) The balustrade leading from lobby to the floor above was of ornate molded wrought iron capped with a teak rail.

(27) The curd is immersed in hot water or whey and worked, stretched, and molded while plastic.

(28) Mold parting direction is an important factor to verify the moldability of a molded part and its determination is the first step to achieve automatic design of injection mold or casting die.

(29) It is because everyday character traits, like all human behavior, have hard-wired and genetic components that cannot be molded entirely by the best environment, let alone the best psychotherapists.

(30) In the preferred embodiment, the air outlet 16 is comprised of a louvered vent 16a integrally molded into at least one side surface 12c, 12d of the housing 12.

(31) The company"s products include solid wood interior door series of composite suite doors, craft suite door, molded door sets;"

(32) Causes the main factors influencing the fluffing paper quality and molded in two ways.

(33) The design for the objective lens Block molded plastic mould design, design issues from the actual production.

(34) It mainly includes rubber Ferrite magnet and plastic injection molded magnet.

(35) This specification adapts the General Purpose American Pipe Thread Specification, ASME B1.20.1, to taper pipe threads for use on plastic pipe and fittings with machined or molded threads.

(36) The Buddhas were only roughly carved in the rock, which was then covered in a mud plaster mixed with straw and horsehair molded to depict the folds of their robes and then painted in bright colors.

(37) Binder removal is one of most time - consuming and significant process of injection molded zirconia ceramics.

(38) All of Twain's books are molded from the clay of his past.

(39) The opening time of movable contact has remarkable effect on the limiting current performance of low voltage molded case circuit breakers.

(40) The rear door scuff plate is attached with molded - in snap retainers.

(41) The design of the of the mold and finished molded rubber part, as well as the process, ensures that the metal insert will not rotate or slip when the rubber head is turned.

(42) These come with a bunch of tips, and you can also pay $100 more to get custom-fitted tips that are molded (by a local audiologist) to your exact ear shape.

(43) Molded strain relief boot from the cable entry to the end of plug.

(44) Cornice: a horizontal molded projection that crowns or completes a building or wall.

(45) Wall tile, square, molded, black and gray, raised line decoration, geometric design including flowers, acanthus leaves, and diamonds, part of a larger design.

(46) Molded snagless strain relief boot from the cable entry to the end of plug.

(47) His naturally even - molded face was set in fine, classic lines.

(48) Dough is kneaded and then molded into little cute animals by this folk artisan.

(49) The FM series includes small, resin - molded electric double - layer capacitors suitable for automatic assembly.

(50) COF is a high performance, multichip packaging technology in which dies are encased in a molded plastic substrate and interconnects are made via a thin-film structure formed over the components.

(51) PC lighting shield is a once - molded product by hot processing of metal.

(52) We misperceive colors and shapes because our visual sense has been molded by evolutionary history.

(53) The device consists of a single-shot molded plastic package that includes a samarium cobalt pellet, a pole piece , and a Hall effect IC that has been optimized to the magnetic circuit.

(54) The gingerbread man was made of molded plastic that had been made with DCA.

(55) A such beautiful pitiable but respectable woman who thanks Alexandre Fils Dumas having molded aux Camellia.

(56) The clay figures from Chin Dynasty were molded precisely with conscientiousness and carefulness.

(57) Molded - in liner fully supported by valve body at flange seals.

(58) Rubber toe bumper and molded TPU heel counter provide added protection.

(59) In recent years, MOH, based on the problems detected in the studies, issued about ten warnings about castor bean , molded sugar cane, puffer fish, raw aquatic products, poisonous mushroom and so on.

(60) We have a lot to foreign and domestic battery manufacturers and battery manufacturers of molded case provides battery status indicator products.

(61) The test results show that the proposed approach is effective and efficient in automatically generating the parting surface of the molded part.

(62) Hydro - stone consisted of a mixture of gravel , crushed stone , sand, and Portland cement molded under pressure.

(63) The blended powder of nylon 12 and wollastonite was molded by selective laser sintering ( SLS ).

(64) Construction in mild steel or stainless steel . Belting provided per customer requirements . Geared motor drive provided as necessary . Molded or bolt-on flights available.

(65) Conductive PE bag is made from LDPE,(http:///molded.html) anti-cavitation agent and super conductive carbon black after blow molded by special machineries.

(66) The invention provides an extrusion molding apparatus capable of improving strength of a molded article.

(67) It is compression molded as a whole, of the same plane with the surface plate, to avoid a large connection gap, so as to look nice and be easy to clean.

(68) EPDM is plasticated at 150 to 200 degrees centigrade, mixed with the assistant, calendered, extruded, vulcanized and molded to prepare the anti-explosion ball.

(69) Silicon rectifier. Case molded plastic. Maximum recurrent peak reverse voltage 1250 V. Maximum average forward rectified current 1.0 A.

(70) MOLDED - IN CONTAMINATION: Discolored particles in the material which cannot be removed.

(71) Shakespeare has molded summer Locker this greedily very successfully in "the Venetian merchant", sinister, the flagitious miser image.

(72) Waterproofed 100 % leather upper, with a light, durable polyurethane molded sole.

(73) SMC insulating plate is molded of electrical grade smc premix under definite pressure and temperature.

(74) BNC connector and breakout wires are molded directly to the cable for added pull strength.

(75) The third chapter divided four centralisms to unfold four kind of rich bright time characteristic character type which the hiring out for working writer writing molded.

(76) The culture of the Western world has been molded by the Bible.

(77) Polynomial, transcendental function, new quadratic curve, B-spline and NURBS have been used in expression of hull molded line, trapezoidal method, Simpson method have been used in static calculation.

(78) After a doctor makes the appropriate injections at the desired site, the microspheres are spread and molded with the fingertip to assure an even, subdermal distribution.

(79) There are different fibril morphologies on the different zones of injection - molded samples.

(80) Silicon rectifier. Case molded plastic. Maximum recurrent peak reverse voltage 400 V. Maximum average forward rectified current 1.0 A.

(81) Decades as a changeling had molded my appetites and energies, but she was all too human, growing heavier with each passing season.

(82) The paper mainly introduces the calculating equation for piston skirt molded lines, the drawing of piston, and the design for convexity mother plate molded lines.

(83) The alien is hand molded out of fondant and is completely edible.

(84) Molded Strain Relief is tightly bonded to the cable jacket to ensure a long cable life.

(85) In recent years compounding raw fiberglass directly into thermoplastic molded parts (LFT D) is growing rapidly in Europe and USA.

(86) This boot offers ultra . It features a molded rubber lugged outsole for traction and slip resistance.

(87) Unless of extremely high molecular weight (1000000), can usually be dissolved and , when heated, they soften or melt so that they can be extruded into fibers or molded into desired shapes.

(88) Bath soap box molded using a method: like soap dissolved in the melt by adding spices and coloring, into the frame manipulation of the cooling mode, when it cemented solid, then cut.

(89) The results show that vibration injection molding has a great influence on mechanical properties of semi crystalline material molded samples, but no influence on non crys.

(90) SMC DMC molded products : Widely used in electrical field such as bus bar clamp.

(91) The aluminum propeller which is molded in one body with airfoil design, its exhaust wind is much higher than steeliness propeller that is stroke out and molding.

(92) Molded in a way that optimizes aerodynamics at high speeds and visuals highat the speed track.

(93) The design for the lens Block molded plastic mould design,() design issues from the actual production.

(94) Universal bottled water adapter made of stainless steel with a molded urethane seal.

(95) The exclusive figure is molded from PVC and comes with a number of accessories, including a paddle ball, flyswatter and detachable spring lower torso.

(96) Paper mache : Wasted papers repulped , mixed with stiffening additives, and molded to serve numerous purposes.

(97) Prime Minister Vladimir Putin, a KGB veteran, has concertedly molded the SVR in the image of its Soviet-era predecessor, most of all in its relentless focus on spying on the West.

(98) I plant a large number of sales of wild fern stem, shoot dry hills, dry mustard, molded dried vegetable, long beans dry.

(99) For on-line installations, scanners can be mounted on a carriage as part of a linear-motion system, registering measurements across sheets, film ribbon, molded test samples, or finished parts.

(100) The torsion bar suspension is molded into the chassis sides.

(101) The molding material is molded by this extrusion molding apparatus to manufacture the molded article.

(102) Molded part 2 by elbow Festival, the camshaft or put pressure on double-toggle System.

(103) The base of braiding machine bobbin carriers is molded of an elastomer, polyurethane.

(104) Mark each cord set at the locations shown in Fig. 2. For samples employing molded cord guard assemblies, a cord clamp is usually not employed.

(105) A digital molded case circuit breaker ( MCCB ) automatic protection characteristic test platform was developed.

(106) Preforms are blow molded on conventional, unmodified blow molding machines, according to PTI.

(107) Silicon rectifier. Case molded plastic. Maximum recurrent peak reverse voltage 1300 V. Maximum average forward rectified current 1.0 A.

(108) The stylish Sunburst Tall boot offers comfort and durability and a molded rubber outsole with extra heel and forefoot cushioning.

(109) FLOW externally molded onto the body to indicate the fixed end containing a TFE seat.

(110) Through the masterpieces, solidly molded from copper sheet and lead sheath, we can connect with the artist, whose eyes are full of sympathy for life.