1. I wish I could stop biting my nails.

2. After half an hour, the fish stopped biting and we moved on.

3. Stop biting your nails!

4. Now she stopped, biting her lip.

5. Taryn, stop biting your fingernails!

6. Stop biting your fingernails.

7. No.3 bus stop bit further on.

8. Serial debug terminal settings: 115200 baud rate, one stop bit, no parity bit.

9. Character type 8 digit data, no verification, 1 stop bit.

10. Specifies bit mask indicating the stop bit and parity settings that can be selected.

11. After these bits a stop bit is sent that terminates the 8 bit data block.

12. After the stop bit is received, the device will acknowledge the received byte by bringing the Data line low and generating one last clock pulse.

13. Communication frames begin with a start bit and end with a stop bit.

14. The default parameters for the console port are 9600 baud, 8 data bits, no parity, 1 stop bit, and no flow control.sentencedict .com

15. The technique used by most electromechanical serial? devices such as teletypewriters, with this technique, each character consists of three parts: a start bit, the data bits and a stop bit.

16. It is used to set baud rate, parity check, number of data bits, stop bit.

17. The break signal state occurs when a transmission is suspended and the line is placed in a break state (all low, no stop bit) until released.

18. An RBSP is either empty or has the form of a string of data bits containing syntax elements followed by an RBSP stop bit and followed by zero or more subsequent bits equal to 0.

19. For all devices, the settings are 115200, 8 bits, no parity, 1 stop bit, and no hardware or software flow control.

20. This machine which is the nice machine for your testing department has the function with optional double-edged pressure, adjustable speed, adjustable route and settable number of stop bit.

21. The baud rate for the interface is 31.25 Kbaud with 1 start bit, 8 data bits, and 1 stop bit, giving a period of 320 microseconds per serialized byte.

22. As used in the work of parity bit and stop bit more fixed.

23. Configure the terminal or PC terminal emulation software for 9600 baud, 8 data bits, no parity, 1 stop bit, and no flow control.