(1) Tell the foundry to cast another piston.

(2) Vitesse Semiconductor Corp is the foundry.

(3) The bell foundry is not open to the public.

(4) But the quickest way to the foundry is through the machine shop, especially in this weather.

(5) Round five of the Foundry Bouldering Competition was again poorly attended.

(6) I got it second-hand from a foundry in Sunderland that closed down last year.

(7) The foundry was allowed to go to pot in the seventies and Pringle's started purchasing from outside suppliers.

(8) The molder, a foundry worker[sentencedict .com], made the mold that made the casting.

(9) Owners of a Tempe foundry never worried about thieves stealing the pricey sculptures in their art garden.

(10) The foundry supplied some 42 spans of varying sizes which enabled the natives to travel from Benares to Calcutta by through train.

(11) Livings was their architect for the iron foundry at Stockton, which John now had ideas of enlarging.

(12) The foundry sector has been chosen to provide contrasts with more growth orientated sectors, such as, chemicals and consumer electronics.

(13) Features clearly cast in Harvey's foundry include the iron balustrade over the porch and the balusters of the main staircase.

(14) From the foundry patterns for the pedestal down tO the fine machining, Taylor had presumably done it all.

(15) Foundry worker David Parr sank the booze at 10 bars in three hours while delivering darts fixtures.

(16) It has three bells cast by a London foundry in 1865.

(17) Familiar with cost analysis of machining foundry etc. technology.

(18) He studied metallurgy as a mature student, having spent ten years working in a foundry.

(19) The site is rising from the ashes of a former foundry following Mrs Thatcher's famous Wilderness Walk there in 1987.

(20) While rooted in the metalworking trades and intimate with foundry practice, the patternmaker functioned more like a carpenter.

(21) Ilium is a particularly good city for optometrists because the General Forge and Foundry Company is there.

(22) A third, operating the crane, which commands the entire foundry floor, hoists the ladle.

(23) Around 1876 Constance demolished the majority of the old foundry buildings, and built the present Camp Mill.

(24) For 75 years or so to 1918, saddler William Watson occupied the foundry before moving to Skinnergate.

(25) This year might see a difference, especially now the Foundry climbing wall is open.

(26) Harry had trained himself for business by working first in a foundry, later in machine shops in the Midwest.

(27) His whimsical creations incorporate the antique wood letters and foundry type from a Montana newspaper he published in the 1960s.

(28) The pieces are cast in bronze, aluminum or iron at a foundry in Alabama.

(29) Most important of all, the process does not involve the high temperatures of a conventional foundry.

(30) Along the length of the railway line were timber yards, rope works, maltings and an iron foundry.

(1) He studied metallurgy as a mature student, having spent ten years working in a foundry.

(31) Botou known as China's reputation as a foundry town.

(32) This is an iron foundry.

(33) Cannon Foundry allows the construction of advanced siege artillery.

(34) Township enterprises mainly in foundry industry.

(35) He's turned off from the foundry.

(36) The foundry has successfully awarded the ISO 9001:2000 Quality Management System Certificate.

(37) Second, in the face of meager profit era,[] Taiwan's IC foundry how about sets more profits.

(38) Authors point out that there are three main aspects impelling foundry development to go forward.

(39) If Britomart wants the foundry in the family, she should find a foundling to marry Barbara.

(40) The company, owning expert stuff in manufacturing and selling sand preparation equipments for foundry, is well known as specialization in the complete sets of resin sand and clay sand equipments.

(41) The moulds for the foundry are made in the tool-room area.

(42) China aid Burma with a built mini foundry shop of which both foundry technology and equipment selection have been described in details.

(43) The strong technical force, first - class services, China's foundry industry is willing to contribute to the development.

(44) It is easy to adhibit sand on the surface of the casting in the foundry using green sand mold.

(45) The quality of castings includes quality of the casting products, quality of foundry process and quality of casting design.

(46) Solve the problem of internal shrinkage of magnesium iron foundry.

(47) Development the the foundry industry's most advanced vacuum die - casting, extrusion die - casting equipment be on the market.

(48) Designed to convey granular products, like silica sand used in the foundry industry.

(49) The interface of the composites made of waste foundry sand as fillers and waste mulching films as matrix was studied.

(50) Vibratory compactability of dry sand in full mold foundry has been researched by experiments on effective factors such as vibratory direction, dimensions, frequency, acceleration and dry sand sorts.

(51) Graphite Crucibles We require Graphite Crucible for the foundry. Kindly quote most competitive rates with MOQ as soon as possible.

(52) The result got from the iron smelting test in cupola furnace shows that the coke briquettes can be used as foundry coke.

(53) In the short term, the foundry plans to use the Gamma II to create all its smaller castings, such as decorative door knockers, souvenir dories and Bluenose II replicas, by this summer.

(54) On the base of experience in design, a process for foundry shop steel structures three dimensional CAD is provided and steps are given to build the modules in the CAD system.

(55) In order to improve the properties of the screen plate, we scientifically designed the chemical composition of a new abrasion-resistant cast iron, studied its foundry and heat treatment parameters.

(56) The authors have studied the regularity of bed coke combustion and melting process in cupola by using foundry coke developed recently in China, gas coke, and furnace coke respectively.

(57) The paper sets the foundry shop of mass production for automobile and that of in batches and small scale production for machine tool as example. Reasonable scale for foundry pro...

(58) The effects of foundry variables and refiners on dendrite structures, micro segregation, inclusion and microporosity of cast superalloy K4169 have been studied.

(59) Thus, the mineral crystalline morphology of natural silica sand is an important parameter for use in foundry.

(60) Cannon Foundry: Cannons are made here from pig iron and wood.

(61) The research has an important practical effect in producing foundry sand and formulating standard of sand.

(62) He was taken on by a factory as a child labourer in the foundry shop.

(63) All processes operated in the foundry workshop can be quantified.

(64) The raw material undergo chemical treatment and dilution for the modified tall oil pitch binding material to be obtained. and its dilute solution is used as a core binder for foundry use.

(65) Have the ability of metal foundry mould designing and ameliorating , quality improvement . 6.

(66) Copper approach gradually enriched the emergence of lost wax casting, resin sand casting, foundry casting.

(66) Wish you can benefit from our online sentence dictionary and make progress every day!

(67) Throughout the latter half of the twentieth century, one of the most popular typefaces in the western world was Helvetica. It was developed by the Haas Foundry of Switzerland in the 1950s.

(68) Its special properties bring lithium montmorillonite a broad applied prospects, it can be used in the field of foundry coating and new electric material.

(69) Flexfet? ULP will benefit AFRL and other Department of Defense (DoD) agencies by providing foundry access to advanced ULP CMOS technology.

(70) The system may raise the temperature of the melted iron. It has been successfully installed in a foundry shop.

(71) Computer solidification simulation software as a high technology is a powerful tool for helping foundry engineers in improving process design of casting, casting quality, and casting yield.

(72) Foundry capacity of bronze has been introduced with discussion about control keys in melting technology and emphasis on analysis of prevention measures against common foundry defects.

(73) We have many new series production programmes ready to come on-stream and several new foundry installations are under discussion.

(74) Mold a large cast iron foundry of choice for the production, use and a large number.

(75) Fang Yuan Tie Yi is a professional enterprise in foundry 、 vendition 、 design 、 installation.

(76) At last we discussed how to combine the rapid tooling and precision foundry to produce batch of samples, we can apply these samples in the fuze system and ball cartridge experimentation.

(77) Chemical Supplies, Scrap, Foundry, Metallurgy, Metal, Scrap, Chemicals and Other Related Products.

(78) Automotive Components Projects Under Planning : Foundry 1. Investment Castings 2. Sand Castings.

(79) Benzylic ether phenolic resin is one of the main components of foundry polyurethane binder; its structure and preparation condition determine the performances of polyurethane binder.

(80) With the development of modernizing foundry shop, the requirements of high standard for molten iron have been raised.

(81) Reasons of forming first cracks were foundry lacuna, impurity gathering , lard exiting.

(82) Bachelor Degree, Have Foundry - relevant experiences, logic, Positive and Good team - work sense.

(83) Resol phenolic resin is one of important resin adhesives in foundry industry.

(84) The quality assurance system of foundry manufacturing process has been analyzed from the viewpoint of Total Quality Control (TQC) in the paper.

(85) This paper has analyzed the causes of foundry defects and proposed the ways to prevent foundry defects so as to improve the quality of castings.

(86) The paper sets the foundry shop of mass production for automobile and that of in batches and small scale production for machine tool as example. Reasonable scale for found...

(87) This paper described the foundry technology of horizontal pouring and solidifying to produce large hollow ductile iron crankshaft cast in sand coated iron mould.

(88) Working knowledge of brass foundry, machining, polishing, chrome plating, assembly, and experiences in ware are preferred.

(89) Zhangjiagang Dingfeng Foundry Material Co. , Ltd. was established in 1988, which is professional in producing furan resin, sulfoacid firming agent for casting and other supporting materials.

(90) Can also be used for large - scale foundry core sand mixing system and the self - hardening sand.

(91) Based on the theory of industrial psychology, the psychology features of the foundry worker and me influence of color environment on the psychology of the foundry worker are analysed.

(92) The foundry method design of a nodular iron reductor housing with ferrite matrix was de-scribed.

(93) Township enterprises have iron, foundry, cement, chemicals, paint and other plants.

(94) Industries, mainly the fire industry, foundry industry, and pure water production.

(95) With hardener K-6 is a laminating resin system designed mainly for use with glass-fibre for reinforcing foundry patterns foundry patterns, jigs and moulds.

(96) It has been found out that the defect was caused by adopting the foundry method with a cold riser which actually acted as a cold metal bleeder.

(97) In renovation of the foundry shop, the original used sand suction system was dismantled,[sentencedict .com] which caused lower quality of the molding sand.

(98) Inertia Vibrating Knock-out Machine is mainly used for casting off foundry sand from proplasm after mechanized molding and pouring in the foundry.

(99) Therefore it is observed that the quality of refractory fillings is a key factor to affect foundry coating quality.

(100) The above mentioned have been analysed and utilizable opinions been recommended as a consulting reference to considering the foundry technological and experimental project.

(101) The paper presents the study on the bath analysis of crankcase with direct-reading spectrum analysis method in the foundry workshop.

(102) The results show that the process is a clean process of mold and core sand foundry and does not pollute environment.

(103) Now, by day, Parker worked in an iron foundry in the Ohio port of Ripley.

(104) Hollywood has a laissez-passer to China's first foundry of filmmaking.

(105) Main raw material steel is scrap steel and spongy iron instead of using much foundry iron.

(106) Figure 1 provides a summary of the key reasons why permanent mold foundry operations should know (and be able to measure) their tooling life.

(107) TSMC's Unified Design for Manufacturing (UDFM) architecture opened the door to this possibility by providing EDA flows with access to TSMC DFM foundry data.

(108) Methods Scanning electron microscope and X-ray analysis were used to study the distribution of all kinds of elements in sand-cast, sculpt and clear-sand of one foundry work and quarry work.

(109) The paper analyzes the reason for the vibrating of heavy foundry for aluminum ingot, and puts forward some improving measures.

(110) A substantial part of the cost structure for a permanent mold process foundry is tooling cost.

(111) We must reduce such discrepancy, strengthen check of graphite form and chemical composition and casting foundry defeats , so as to promote casting complex property and using...

(112) The paper is about how to obtain the densified structure of heavy-wall nodular iron castings under the condition of gravity foundry and to introduce the authors research in this area in detail.

(113) HOT TYPE : Foundry type and linecaster slugs as opposed to cold type.

(114) The research towards stories about foundry sacrifice shows that, they originated from the blood sacrifice etiquette in ancient demiurges and is part of demiurgic sacrifice act.

(115) In this paper, different morphological structures which vary with the contents of furfuryl alcohol in a new zero-nitrogen no-bake furan resin foundry sand binder are systematically studied by TEM.

(116) Manufacturing 25 suits of hydraulic system of Hubcap Foundry Machine for Zhejiang Wangfeng Automobile Factory.

(117) This is the engine bedplate casting ex foundry and the bearing housing blocks.

(118) Swinging mixer is a new type foundry sand mixing equipment invented by the author, which had got the patent of china.

(119) The shrinkage cavity, depression, shrinkage porosity, scab and swell defects often took place with the heavy plate castings produced by adopting traditional foundry method.

(120) Great Wall Computer Corporation is China's largest supplier of OEM production, production foundry display, power.

(121) By this technology it can achieve rapid foundry of glass mould's roughcast.

(122) The experiment results showed that anthracite coal blended with lean coal and coke powder could produce excellent second class foundry coke.

(123) The paper sets the foundry shop of mass production for automobile and that of in batches and small scale production for machine tool as example. Reasonable sca...

(124) Shell molding of phenol formaldehyde resin coated sand has been widely used in foundry and with prospective future.

(125) The CAX technology has been applied to predict casting defects and optimize foundry techniques in the foundry shop.

(126) Novarese would go on to become one of Italy's premier typeface designers, but in 1952, the release of this all-caps titling face revolved around Butti and the foundry where he worked, Nebiolo.

(127) China. Botou City of Hebei Province full production machinery Casting Co. , Ltd. is non - ferrous metal casting, Grey Iron Foundry - based enterprises.

(128) A sand moisture automatic control system for foundry is introduced.

(129) Our printing - house often wanted sorts,[] and there was no letter - foundry in America.

(130) Changchun Cast Steel Co. , Ltd (Changchun Foundry Factory) is a company specialized in the production of heat-resistant alloy steel castings. It has two advanced "V" mould casting production lines.

(131) Foundry Industry: According to customers drawings, cast ductile iron , cast iron , cast iron machine parts sales.

(132) Main uses: flux for metallurgy, ceramic, glasswork, abrasive substance, foundry, refractory, smelting etc.

(133) For foundry sand from a famous domestic area, the curve of thermal expansivity with the temperature was described.

(134) Three dimensional CAD is the future for designing foundry shop.

(135) Our foundry department can produce 5000 tons of grey iron and spherulitic iron per year which provide solid foundation for rapier loom parts.

(136) The foundry crane is themember of bridge crane family and specifically used in the metallurgical plant.

(137) It has become the rapid capitalist Great Leap Forward into modernization, with the old slogan "iron foundry into every village" re-emerging as "a skyscraper into every street.

(138) An approach of identifying vermicular graphite is introduced in foundry manufacturing using model identifying in fuzzy math.

(139) Space Micro received application-specific integrated circuit (ASIC) devices in March from their silicon foundry and are under test and evaluation.

(140) It appeared to him that the old people were dead, and that he had been taken to the iron foundry to be melted down.

(141) The foundry method scheme, gating system design, melting and treatment of the molten iron was described.

(142) In the future, Cloud Foundry will give developers a consistent experience over both public (off-premise) and private (on-premise) clouds, empowering organizations to make the most appropriate choices.

(143) A green sand on-line test and control system has been developed for foundry sand preparation plants.