1 Aluminum alloy shell, elegant, durable, heat eliminable.

2 Product: Nylon, aluminum Alloy Etc Tow line.

3 Material has Adiantum , zinc alloy, aluminum alloy...

4 Specialized in producing high-grade aluminum alloy swing gate, hanging sliding door, sliding doors, folding doors, horizontal door hardware series plastic parts.

5 According counter pressure casting technique and structure of aluminum alloy wheels, designing of molding system and optimized mold has been discussed.

6 Mainly engaged in zinc, aluminum alloy die-casting, hot and cold chamber die-casting, non-stick coating paint, high temperature melting straight paint, industrial paint, paint consumption.

7 Application: General wire processing, aluminum alloy wire, wire, light of globular copper etc.

8 The residual strength tests of unstiffened aluminum alloy LY12CZ panels with multiple site damages(MSD) were carried out.

9 Because of its specific protective performance, high strength aluminum alloy has been widely used as structural material for light armored vehicle.

10 Therefore high performance aluminum alloy strip can be only made by reasonable designed ultrasound casting equipment.

11 The ageing precipitation and strengthening behavior of 7B04 aluminum alloy were investigated by DSC, TEM, HREM, SAED and tensile testing techniques.

12 The double-phase composite material of the aluminum alloy and the neodymium iron boron type rare earth permanent magnet material is prepared by using a powder metallurgy method.

13 Ltd who is specialized in the aluminum alloy gravity casting.

14 With full aluminum alloy and plastic shell, the external appearance is noble, graceful and lastingly rustless.

15 Body structure1. The whole machine adopts aluminum alloy casting, with precision CNC machining, high speed machine can withstand strong, durable use.

16 In the first place, it is pointed out defects of national standard metal molding tension test specimen for casting aluminum alloy in this paper.

17 A simple chemical etching method was developed for fabricating the super - hydrophobic surface on polycrystalline aluminum alloy.

18 Chain Link Fence the use of national high-quality low carbon galvanized steel wire, PVC bag steel wire, stainless steel wire, aluminum alloy wire crochet made.

19 The effects of positive and negative voltage on phase constitution of ceramic coating on aluminum alloy prepared by micro-arc oxidation were studied by XRD analysis.

20 The recycling aluminum industry shall phase out coal fired reverberatory and other reverberatories under 4 tons and crucible furnaces are prohibited to smelt recycling aluminum alloy.

21 Influences of main parameters such as composition of electrolyte and electrical parameters in preparing black ceramic coating by microplasma oxidation on ADC12 aluminum alloy were studied.

22 Low cost: Although the market price is higher than the aluminum steel, but lower than the proportion of aluminum alloy steel, and the processing costs below the parapets of steel products.

23 Based on the phase field model, the three-dimensioned numerical simulation of the dendritic growth of aluminum alloy was studied by coupling with heat noise.

24 It comes to the conclusion that the corrosion fatigue fracture of LC4 aluminum alloy is the results of combined action of anodic dissolution, hydrogen embitterment (HE) and mechanical damage.

25 Among all optional materials, LC 4 super - hard aluminum alloy has the highest performance to price ratio.

26 The engineering crack initiation life and the total fatigue life of notched specimen, made of LY12-CZ aluminum alloy and with program block load history, are predicted and experimentally investigated.

27 Knurling machine is the key equipment to increase shearing force of the combined profiles of thermal barrier strips and aluminum alloy.

28 It can be used to clean inner walls of gas-fired aluminum alloy reverberating furnace, holding furnace and crucible furnace.

29 An exemplary ion source for creating a stream of ions has an aluminum alloy arc chamber body that at least partially bounds an ionization region of the arc chamber.

30 The technology of the bright Sn-Pb alloy electroplating on aluminum and aluminum alloy with the pretreatment method of zinc-nickel immersion plating and nickel pre-electroplating was studied.

31 A method of predicting the residual creep life of aluminum alloy 2A12 by using indentation test method with flat cylindrical indenters was proposed.

32 The utility model belongs to the field of wire stretchers, in particular to an in-line type aluminum alloy wire stretcher drum.

33 This text introduces the technologic point of plasma arc welding for high temperature alloy, aluminium and aluminum alloy, titanium and titanium alloy, argentum , platinum, etc.

34 The stress corrosion cracking (SCC) behaviour of 7075 aluminum alloy was studied using slow strain rate test (SSRT) technique.

35 This ship is an aluminum alloy welded catamaran passenger vessel, using symmetrical semi-hull, single deck,(http:///aluminum alloy.html) upper lower cabins and propeller driven.

36 Tensile strength of sample special vehicle ZL205A aluminum alloy wheels made by counter pressure casting is with no heat crack, loosen or other defects.

37 The casting powder reduces hot crack trend of magnesium aluminum alloy castings.

38 Adopt complete aluminum alloy structure, the hard positive pole of surface is oxidized and processed precisely; the surface has EMI/ RF anti-abrasion layer.

39 The priority of using melted pole pul se heliarc welding technique to weld the thick aluminum alloy fuel tank is introduced.

40 Melting bubble method perpetrating foam aluminum alloy is one of the most the industrialization scale production in the future because its production craft relatively simple, the cost is low.

41 Effects of quenching agent on grain boundary precipitates and precipitate free zone (PFZ) in 7055 aluminum alloy have been investigated by transmission electron microscope (TEM).

42 A low pressure casting equipment has been developed, which is specially designed for the production of large-size thin-walled high-quality aluminum alloy parts with resin sand molds.

43 The present invention relates to a kind of composite material containing foamed aluminum alloy and used in work bench of machine tool.

44 Now under development is the method of alumite after jointing aluminum alloy and resin.

45 Material: high quality low carbon steel wire, stainless steel wire, aluminum alloy wire, PVC wire.

46 An aluminum alloy casting can be heated to the solutionizing temperature.

47 Extruded aluminum alloy cylinder body or cast steel, The surface is treated by anticathode oxidation which greatly improves the rigidity and anti-corrosion.

48 Drawing process of aluminum alloy wire has large plastic deformation, which mathematical model is complicated including geometric nonlinearity, boundary nonlinearity, material nonlinearity and so on.

49 Effect of pre-deformation and quenching agent on intergranular corrosion resistance of high strength aluminum alloy was investigated in this paper.

50 MAG Wire Mesh Fence Material high - quality high - carbon steel wire, galvanized wire, steel wire, aluminum alloy wire.

51 The steam box is manufactured with stainless steel or aluminum alloy materials, and the diameter size of the steam box is matched with the caliber of the kettle.

52 The anodic oxidation and electrolytic colouring of 6063 aluminum alloy containing rare earths in solutions of sulfuric acid and stannous sulfate are studied.

53 Systematically analysed aluminum alloy wheel product structure and characteristic of mold design, and the advantage and feasibility of aluminum alloy wheel low pressure die casting technology.

54 Numerical simulation technology has been carried out to analyze the filling process of an aluminum alloy wheel produced by low pressure die casting.

55 The die construction , running principle and features, technological process flow, technique parameters and product performance of aluminum alloy integral naves by gravity die casting are described.

56 The surface and inner qualities of aluminum alloy ingot by electromagnetic casting (EMC) have been investigated and compared with those of the direct casting (DC) one.

57 The aluminum alloy bridge is aesthetics, high-grade, and mainly for main power routing in sewing workshop, to make distribution box supply power and control effectively for each group.

58 The dial shall be made of copper aluminum alloy, inalterable black numerals and graduation on white background. The manufacture of same will be to applicable standards.

59 The intrinsic self regulation effect of aluminum alloy wire in the region of short arc in MIG welding is investigated with self made equipment.

60 The molybdate and manganate conversion coatings for aluminum and LY12 aluminum alloy were investigated using weight loss and electrochemical methods.

61 Material is stainless steel and high intensity aviation grade aluminum alloy through anodization, firm and durable, long service life.

62 The window all changed into the aluminum alloy, uglily is unable to withstand.

63 A porcelain like film with protective and ornamental function can be obtained by anodizing aluminum alloy in potassium titanyl oxalate acidic solution.

64 The results showed that the method with intuition and data reliability is a better way to investigate quantitatively the modification law for aluminum alloy.

65 Aluminum alloy wheel hub modelling simple powerful, the tire screw has decorates the cap nut.

66 An experimental study on cutting force, cut- in impact force and cutting-tool wear are conducted in the interrupted cutting of aluminum alloy with PCD tools.

67 Figure 2 is an actual plot of data taken from a family of molds of the same design used to produce a one-piece, gravity PM cast aluminum alloy passenger car wheel.

68 According to feature of 6A02 aluminum alloy and quality requirement of the shapes, spray quenching and forced air quenching on the shapes flowing bed of extruder were conducted.

69 Aluminum alloy is used to cast the shell for its beauty and durableness . Tricolor energy-saving lamps and transparent lampshades are used for enjoyable appearance and good practicality.

70 The results show that the aluminum alloy sandwich deck under lateral pedrail deck load and wheel load would fail in the form of compression buckling.

71 T-joint is an important constructional form in the structure of automobile body made of aluminum alloy.

72 The aluminum alloy casting can be rapidly cooled from the solutionizing temperature directly to the aging temperature, eliminating the room temperature hold of a conventional process.

73 The indoors SMD full color product: Uses the high polymer tofireproofingPC the revertex face shield and the aluminum alloy face shield(), has the good heat dispersion.

74 Deep penetration laser welding was performed at aluminum alloy LF 3 Y 2 under hot and press condition.

75 Filter medium adopts kinds of materials, such as inorganic fiber, cellulose fiber, resin-impregnated paper, Filter vessel is die-cast in aluminum alloy.

76 Surface oxidation treated aluminum alloy makes the machine sanitary, sturdy and durable.

77 The aluminum alloy bridge deck designed in chapter four was used for the footbridge, and the stiffness, natural frequency and stability factor is calculated also.

78 Feeding effect can be improved with qualified casting using side riser gating system for plate or heavy concave aluminum alloy casting.

79 The local corrosion area on the hard aluminum alloy of aircraft skin surface was rapidly renovated in- situ by anodising with brush electroplating equipment firstly and then spray painting.

80 The results of the corrosion experiment of two periods for half a year and one year show the protection of alclad on LC4 aluminum alloy was different because of different water.

81 Do spot welding experiments to aluminum alloy plate in the same condition of simulation, prepare low magnification metallographic photos of joint , and measure nugget diameter and penetration rate.

82 In seawater and fresh water, aluminum alloy was not corroded as the all protection of alclad.

83 The casting technique for a huge aluminum alloy casting is studied by hydrodynamics simulation using Lucite mould.

84 The self-lubricate coating on the surface of aluminum alloy was prepared by synergistic technology, which was based on the study of the analysis of the import mechanical work piece.

85 Gypsum board ceilings and looks obscure compared Liu sharp color beautiful couple more settle on the aluminum alloy ceiling.

86 The reasons of porosities production and process instability in CO2 laser welding shipbuilding T-section aluminum alloy are also discussed.

87 In the neutral insulated system, it is equipped with earth fault detector. The guide rail of drawer units adopted special aluminum alloy, safety and reliability.

88 With the fabricated preforms , the pressure casting process of porous aluminum alloy was studied.

89 It is shown that the mechanical properties of annealed sample of 2224 aluminum alloy are improved by the combination of solid solution and aging treatment after ECAP, the size of grain is refined.

90 The chemical milling process for 2219 aluminum alloy tube was investigated using orthogonal test and the optimum formula and technology were established.

91 Hot ductility testing was used to evaluate the liquation cracking susceptibility of aluminum alloy 2219. The fracture surface of hot ductility samples was examined using SEM.

92 Surface oxidation treated aluminum alloy makes the machine sturdy and durable.

93 Based on the technology of rotating impeller de gassing in aluminum alloy melt, the effect of pulse gas current on the gas bubble size by studied with the water modeling method.

94 The dynamic resistance profiles of low carbon steel, zinc coated steel, stainless steel, aluminum alloy and nickel-base alloy have been studied.

95 The cell model consists of two phases: the aluminum alloy matrix and the intermetallic cluster.

95

96 J1125 type horizontal cold chamber die casting machine was used to produce the aluminum alloy housing of motorcycle based on its complicated shape, thin-wall and small profile dimension.

97 Our company is making efforts to design, development and application of moulding line, core-making machine, aluminum alloy pouring machine, as well as casting pattern and core box.

98 Effects of quenching agent on the polarization curves and intergranular corrosion resistance of high-strength aluminum alloy were investigated in this paper.

99 During the aluminum alloy forming process, die cavity surface design is very important.

100 Multi-spoke aluminum alloy wheel design bring out the unique qualities of the vehicle, tires with decorative screw cap .

101 The application of aluminum alloy resistance spot welding (RSW) in the automotive and aviation fields is impeded by the wear and life of electrode.

102 High-quality optical lens, aluminum alloy shell plating, small size, rapid give off heat, low power, long life, easy installation, bigger adjustment range of projection angle.

103 In this paper , the residual stress in the DCB specimen of LC 4 aluminum alloy was studied.

104 Q37 series hook type airless shot blast cleaning machine is mainly used for surface cleaning and strengthening of steel structural parts, castings, aluminum alloy parts and other spare parts.

105 HOUSING A rugged, low-resonance frame of diecast aluminum alloy capably supports the heavy magnetic structure and the moving parts.

106 Friction and wear behaviors were studied between the untreated base material and the friction stir welds of LF2 aluminum alloy on MM-200 abrasion tester.

107 Based on it, the effects on ultimate loads of aluminum alloy I-beam by the initial geometric imperfections and eccentric loading were investigated.

108 A method of predicting the residual creep life of aluminum alloy 2A12 by using indentation test method with flat cylindrical indenters was proposed. There were four steps included in the method.

109 The phase and microhardness distributions in ceramic coating formed by microplasma oxidation on LY12 aluminum alloy were investigated using X - ray diffractometer and microhardness tester.

110 Effects of SSS die casting processing parameters on properties of ADC12 aluminum alloy castings were examined by a standard tensile testing specimen with different ingate configurations.

111 The effects of the main processes on texture and earing of 3104 aluminum alloy sheet are investigated with the help of electron microscopy, X ray diffractometry and deep drawing.

112 An explanation is also given to the mechanism of CREM process on restraining macro-segregation of solute elements in 7075 aluminum alloy ingot by DC cast.

113 The on-line testing of hydrogen content in the molten aluminum alloy is very important for producing aluminum alloy castings of high quality.

114 According to the experimential results, the micro mechanism of Laser Shock Processing (LSP) increasing the fatigue property of aluminum alloy are researched preliminarily.

115 Is a company specializing in the production of various series of aluminum and aluminum alloy products Carabiner enterprises.

116 The quench sensitivity of 7055 aluminum alloy was studied with time-temperature-hardness curve evaluated via interrupted quenching and transmission electron microscopy.

117 Double-headed cutting CNC sawing machine: the main material for aluminum alloy curtain wall.

118 The effect of a kind of efficient grain refiner on the macrostructure of aluminum alloy was investigated.

119 The effect of rolling reduction and temperature on the microstructure and mechanical properties of 7050 aluminum alloy was investigated.

120 Q37 series hook type airless shot blast cleaning machine is mainly used for surface cleaning and strengthening of steel structural parts, casting, aluminum alloy parts and other spare parts.

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145