1. Assorted blends of acrylic adhesive caulk fortified with silicone.

2. Make a brioche in this Silicone non-stick Master Baker from Prestige, price ￡4.69.

3. Straight silicone caulk does not accept paint, so the normal process with silicone is to caulk when you have completed painting.

4. You must also buy three large tubes of silicone and a well-oiled silicone gun.

5. Hide it by smearing silicone sealer all over and adding gravel in a pebble-dash way.

6. Silicone grease is insoluble in water and can be autoclaved.

7. I was fed up with the yucky mouldy silicone round the edge and reckoned a proper job should be done on it.

8. Katherine Dowson's giant silicone drip work links the exhibition in its site within the 50-foot stairwell.

9. Step 2 Using a silicone gun, apply an even bead of silicone along edges A-B of the base.

10. The flysheet is silicone protected on both sides, something that not many manufacturers do.

11. Moreover, the proteins remain below the silicone partition, leaving the clear aqueous phase on the top.

12. Seals to original vehicle specification are compatible with silicone fluid.

13. Polymers - there are various types, such as silicone polymers which cling to the hair with effective conditioning benefits.

14. Jonsil Silicone Alkyd finish is a masonry paint ideal for inner city and coastal environments.

15. The unique Master Baker non-stick silicone coating ensures a perfect turn-out.

16. There is concern over the safety of silicone breast implants.

17. Some bags use a silicone treated down to enable them to resist damp.

18. I stuck it on with silicone sealant glue and it is unaffected by salt spray or moderate heat.

19. According to the publicity men at Playtex she did it without the aid of pumping iron or silicone injections.

20. Most of the solar panels we came across in our survey used monocrystalline silicone cells.

21. Then the secondary bevel was carefully cut with a fine silicone coated felt wheel.

22. However, to date, the best method I have tried is to spray the lengths of yarn with silicone spray.

23. So what do you think and who do we ask to find out if these rubber seals are compatible with silicone fluid?

24. It may then float, and needs to be attached to a rock with silicone sealant.

25. The expansion will more than double the plant's manufacturing capabilities, making it one of the world's largest silicone plants.

26. Then make it waterproof by sealing all the internal corners with a bead of silicone sealer, spread with a wet thumb.

27. In places where a seam was not going to show from the street, he used a longer-lasting clear silicone caulk.

27. try its best to gather and make good sentences.

28. On top of that they poured a thin layer of silicone oil.

29. This is a factory, more than 100 years old, which produces silicone for steel production and computer chips.

30. The next days when the researchers flipped the beaker, the silicone oil began to form fat mounds.

31. For elaborate structures stick rocks together with silicone sealant, but let it cure completely before putting it into your tank water.

32. It contains honey, almond oil, protein, silicone and organic herbs.

33. The old sides can be removed by slicing through the silicone sealer with a razor or scalpel.

34. Silicone lubricant enhances recovery of nucleic acids after phenol-chloroform extraction Phenol-chloroform extraction is a major step in the purification of nucleic acids.

35. Fiber glass braid, coated with silicone resin.

36. Aloe powder, VE, glycerine, silicone oil and collagen.

37. Ceramics: kaoline, silicone trioxide, clay and so on.

38. The silicone conveniently comprises a polysiloxane.

39. For cots, smoothing, preferably made of silicone rubber rollers.

40. Silicone does not dry rot like latex rubber.

41. In the last three months, doctors have inserted silicone bags filled with saline solution to stretch the skin so it will be able to cover her legs once they are cut apart.

42. It's created by spraying carbon nanotubes - tiny tubes of carbon atoms where the walls are a single layer of carbon - onto silicone.

43. The fractures of silicone rubber are observed and microscopic mechanism of failure is studied with SEM.

44. The applications of silicone in epoxy encapsulating materials and potting compound were introduced in this review.

45. This paper deals with the efflorescent damage in Baodingshan grotto, the remedial measures of using silicone, and performance of silicone are discussed.

46. Cast bronze body, plastic check assemblies, silicone discs and stainless steel springs.

47. This paper presents the development of a new type of fire-resisting cable with ceramic polymer composite silicone rubber as insulation.

48. Industrial high performance foams, fine celled polyurethane foams, cellular silicone foams, liquid silicone rubber, high frequency circuit materials, flexible circuit materials.

49. Objective:To introduce experience about modified radical mastectomy combined with breast reconstruction by silicone breast prosthesis for breast cancer.

50. Silicone rubber is a macromolecule polymer, and can suffer a large deformation.

51. Silicone rubbers are used for both high - and low - temperature appilcations, since their properties change little with temperature.

52. High performance-cost silicone fluid antifoam agent and the operation procedure of spray-on technology for adding antifoam mixture were introduced.

53. Baolong tree 100 years to do a first - class silicone rubber.

54. Finally,[] the results of ANSYS simulation show that the silicone rubber membrane has a good linear response.

55. The Paper Summarizes the technology development and ontlook of one component room temperature Vulcanized silicone rubber.

56. Objective : To observe the improving methods of retrograde insertion of silicone pipe in the nasolacrimal duct.

57. A solvent resistant adhesive obtained by the crosslinking of a hydroxyl or urea or hydrocarbon terminated unsaturated polyurethane or polyurethane-urea polymer with a peroxide or a silicone hydride.

57. try its best to gather and make good sentences.

58. Conclusion Asiaticoside can significantly control the formation of fibrous capsule around the silicone implant in rats.

59. As innovative automotive materials, silicone - coated textiles and their applications are described.

60. A needle - plane electrode system was used to study the hydrophobicity of silicone rubber current ( DC ) corona.

61. The methyl phenyl silicone resin for heat resistant coatings was prepared by converse hydrolysis-polycondensation of chlorosilane.

62. Starting in the 1940s pinup era, there were liquid silicone oil injections for breast enlargement (bad idea: leakage, inflammation, granulomas) followed, in 1962, by silicone-filled implants.

63. All nipples are made of food grade liquid silicone, which is heat-resistant, non-toxic, non-sticky, odorless, Nitrosamine free and complies with the FDA.

64. Under the motorization , this silicone made brain seems like thinking----in that funny and unnecessary variation.

65. But some can be found at your local hardware store, though in inedible products like low tox antifreeze, silicone caulk, soap, sunscreen, and play sand.

66. The use of silicone polymer material substitution of oil polymer material, is to explore a low-carbon, one important way of circular economy.

67. The commonly - used materials of IOLs include polymethylmethacrylate ( PMMA ) , silicone, hydrogel and acrylate.

68. The silicone molecules in the coatings can be adhered with the hydroxy group on the surface of substrate to form a network hydrophobic silicone film with excellent water proofness and durability.

69. Blowing agent AK was used to preparing silicone rubber sponge.

70. Are products are: water polo foot O ring gasket seals sucker Washers silicone chip nail head gasket sets of plastic earplugs dust jacket sets of rings, such as sealing ring.

71. Low burst pressure of silicone tubing without reinforcement compared to the other thermoplastic tubing is another limitation.

72. Injection of silicone or silicone-like material into the breast for augmentation mammoplasty can induce local or systemic adverse reactions.

73. Posterior capsular was ripped, and silicone oil was removed via pupil and sclerocorneal tunnel during the surgery.

74. It includes electrolyte membrane, silicone rubber seal ring, multihole anode plate, and free lay mode formed granules of catalyst layer between said electrolyte membrane and multihole plate.

75. The silicone rubber reinforcing filler made by us can replace partly fumed silica.

76. Objective The aim of this paper is to introduce the clinical and laboratory procedures of fabricating silicone gingival epithesis and evaluate the long-term effects of the epithesis.

77. The effect of various recipe factors on radiation resistance of phenylene silicone rubber was investigated.

78. So sandwich structure had the same elasticity with cellular silicone elastomer.

79. The vulcanization mechanism , composition , application of addition type liquid silicone rubber are reviewed.

80. Foam silicone rubber is a typical porous material whose constitutive behaviors are attributed to the hyperelastic properties.

81. Ingredients: Rose extract, whitening factor, rrimethylglycine, glycerol, propylene glycol, silicone.

82. With MQ resin as reinforce filling materials, dimethicone as dilution agent, the transparency liquid silicone that used in spinning trademark was prepared by fumed silica.

83. A cup of silicone cost $800, and the cosmetologist would inject half a cup to two cups in a single session, Ms. Rodriguez said.

84. It was then reacted with low hydrogen containing silicone oil via hydrosilylation to produce epoxy-containing polyether silicone.

85. Applications of silicone adhesive for adhering quartz ceramic and low expansion alloy, and measures for reducing internal stress to obtain high strength and high temperature performance are discussed.

86. Install glass rings and use any glass bonding crazy glue or silicone alone the red area I marked.

87. FA 9866 is a silicone polymer with high concentration. It can provide very silky feel.

87. try its best to collect and build good sentences.

88. Objective To report a new simplified silicone oil removal surgery for aphakic eyes.

89. Furthermore, rapid manufacturing technology of silicone rubber mould also gains extensive attentions.

90. Objective To observe the therapeutic effect and safety of heavy silicone oil used as internal tampenade to treat com- plicated retinal detachment.

91. Menstrual cups are made from either latex or hypoallergenic silicone which means that the wearer can be safe from unwanted irritation and allergies.

92. Then, use the aquarium silicone to seal under the flange around all 4 screw holes and around the pipe hole and screw it down with 4 short wood screws.

93. A study was made on the application of dimethyl silicone oil, propanetriol and 1,2 propanediol to decrease the modulus of MVQ vulcanizate.

94. Objective:To explore the clinical effect and significance of silicone coated metallic esophageal stent to treat postoperative anastomotic fistula due to gastroesophagostomy.

95. Inertness and ease of manufacture provides advantages to silicone tubing.

96. NIH scientists were asked by Congress to study the safety of silicone breast implants.

97. The silicone rubber foam has excellent properties about cushion and energy absorbering.

98. Synthesis process of the discussion MQ silicone resin performance of the main factors such as reaction ratio, reaction time, reaction temperature, vinyl add content, add water and so on.

99. Changes of IR group vibrational frequency in the blends of diethyl silicone and sebacate were studied in this paper.

100. Objective To investigate the difference of tissue specificity in peripheral nerve regeneration through y-shaped silicone tube following resection of the sciatic nerve in rats of different ages.

101. It is indicated that the silicone adhesive is easy to smear in adhering quartz ceramic and low expansion alloy.

102. Organic silicone resin with low surface energy, good water resistance, fine weatherability and excellent air permeability has been widely used in polyurethane modification.

103. Various kinds of mixes and products, based on fluororubber ( - 40℃ -- 200℃ ), silicone rubber ( - 70℃ -- 300℃ ) and fluoro - silicone rubber.

104. Silicone treated synthetic fibre balls; retain their fluffiness and resilience wash after wash.

105. The insulating sleeve with the elasticity adopts a silicone tube, a rubber sleeve or a plastic sleeve.

106. Objective To evaluate the clinical significance of probing of lacrimal passage combined with neotype silicone nasolacrimal intubation in treating lacrimal passage diseases.

107. The effects on the adhesive properties of HTV silicone rubber to metals made use of tetraethenyl silicane and tetraally silicane have been studied.

108. Install glass rings (Angel Eyes) and use any glass bonding crazy glue or silicone alone the red area I marked. Install rings from behind.

109. Methods:Subcutaneous mastectomy and post pectoralis augmentation mammoplasty with silicone gel filled breast prosthesis were used in 6 cases, 7 breasts, they had different kinds of breast disease.

110. The advances of components, treatment and comprehensive utilization of high boiling silane resulting from the synthesis of organo- silicone were introduced.

111. By comparing several materials, an epoxy silicone resin cured at room temperature is selected as the matrix of the coating.

112. The thin connective tissue capsule around a silicone breast implant is shown here.

113. The effect of resin coloring, silicone ruber long service life, and by adding substantial filler.

114. Triple Action Miracle Yeux Ingredient: Octadecyl alcohol, glycerine, silicone oil, VE and etc.

115. Laparoscopic silicone rubber tube attachment of cap of medical instruments, laparoscopic in the high-temperature sterilization process, still can maintain good performance.

116. The research background of the liquid conductive encapsulated silicone rubber was summarized.

117. Objective To investigate treatment effects of implanting epidural tube and silicone tube in anastomoses of lacrimal canalicular laceration.

118. The effects of the vinyl content of ethylene silicone rubber, polyvinylsilicone oil, hydrogenous silicone oil(), chloroplatinic acid on the mechanical properties were reviewed.

119. Conclusion To adopt implanting epidural tube and silicone tube by stage in anastomosis of lacrimal canalicular laceration can reduce complication of lacrimal point tear, and it make operation easy.

120. Objective To summary the clinical results of the artificial iris diaphragm(AID) implantation for silicone oil support eye.

121. Methods: Retinoscopy was performed on 17 eyes of 17 patients with silicone oil injection in which the retina is in place. Pre-and postoperative refractive states were compared.

122. This, however, is contained within an inflatable shell made of a soft, transparent silicone - based material.

123. Our company supplies raw materials such as silicone, surfactants, plastic additives and PUD series.

124. The thermodegradation of GS-401 ablative silicone resin was studied with TG, DTA and IR.

125. In the past three months, doctors have inserted silicone bags filled with saline solution to stretch the skin so it will cover her legs once they are cut apart.

126. AIM: To discuss the effect of orbit - orb connection using silicone tube in treating angle paralytic strabismus.

127. Methods In this retrospective study, The operation indication, result and complication fo 11 consecutive cases of artificial iris diaphragm implantation for silicone oil support eye were studied.

128. The effect of CeO _ 2 on the thermal stability of methylvinyl silicone rubber was researched.

129. Method A: Cultured epidermal cell sheets were fixed on the silicone oil gauze. Method B: Direct cryopreservation of the culture chamber containing epidermal cell sheets.

130. Pink transparent silicone dildo with true-to-life testicles and throbbing veins. Extremely flexible and slippery for all anal and vaginal sex games. length:16cm, diameter: 4 cm.

131. Conclusion Silicone oil in anterior chamber, emulsified silicone oil, peripheral anterior synechia of iris, intraocular lens and aphacia were the main causes of silicone oil glaucoma.

132. The elements which affected the ablative properties of silicone rubber heat shields were discussed.

133. Revolutionary duotone silicone design made using state of the art silicone fusing technology.

134. Breast augmentations ("breast implant"): augmentation of the breasts by means of fat grafting, saline, or silicone gel prosthetics, which was initially performed to women with micromastia.

135. Dr. Saltz attributes renewed popularity of breast augmentation to the 2006 Food and Drug Administration decision to lift the ban on cosmetic use of silicone breast implants.

136. The room temperature vulcanizing(RTV) silicone rubber coating on the surface of insulator may increase the flashover voltage of contaminated insulator.

137. The polymer is structurally characterized in that the polymer is a hyper-branched structure containing silicone atoms and aryne group.

138. A new type of hydrophobe for latex paints has been developed using silicone and paraffin.

139. In order to reduce the occurrence of subdermal liquid accumulating and sound-skull syndrom, we developed a novel silicone rubber artificial skull of inducing tissue growth.

140. Faults: no acid especially not resistant to mineral acid, not ultraviolet radiation resistant, no self-extinguishing RTV silicone compound, not near fire.

141. Additional Liquid Siliconc rubber is a special Rind of silicone rubber, whichpossess unique properties.

142. The silicone-acrylate emulsion and architectural coating were prepared with acrylate and silicone intermediate which was synthesized by vinyl group silicone monomer and cyclo-form silicone monomer.

143. High efficiency uncured compounds, sheet, strip, tube, special shape for Viton, Silicone, EPDM, HNBR, HBR, NR...etc.

144. The molecular structure of the silicone resin pre-and post-blending modification by poly (butyl methacrylate)(PBMA) was characterized by Fourier transform infra-red spectrometry.

145. A cup of silicone cost $800, and the cosmetologist would inject half a cup to two cups in a single session, Ms.

146. The quality of silicone sealant adhesion to anodized aluminum varies widely.

147. BACKGROUND: At present, gas and silicone oil are not ideal as a long-term vitreous tamponade (/silicone.html), perfluorodecalin needs to be elucidated.

148. Bamboo knit fabric contoured silicone knee pad provides comfortable support and protection in the studio.

149. If a silicone breast implant ruptures, you may not notice right away — or ever.

150. This particular silicone case comes in an attractive color or design.

151. After finished with silicone resin, the anti felt shrinkage and warp and wept shrinkage of 100% wool worsted fabric could be kept in "machine washable"standards with other feature index excellent.

152. A silicone - acrylic grafted copolymer emulsion has been prepared by seeding emulsion polymerization.

153. In this paper, research on curing system of vulcanized silicone rubber aging tear strength after impact.

154. There are a lot of studies on modification of epoxy with silicone domestic and abroad, but few studies on modification of novolac with silicone are searched.

155. The results show that the aromatic additives, especially diphenylacetylene, can improve radiation resistance of silicone rubbers.

156. RP based mould making process with plaster casting technique firstly uses rapid prototype as master mold, then get gypsum mould through silicone rubber mould, lastly become the.

157. Silicone alkyd coating are based on either the reaction product of a silicone intermediate and an alkyd resin, or a cold blend of silicone resin and compatible alkyd resin.

158. To prevent hypotony, it has been suggested that if the patient has been performed retina dissection or excision in large area the silicone oil could not be removed until the complication has occurred.

159. Modified silicone with long chain acylate is synthesized by hydrosilation of PHMS and lauryl acrylate using chloroplatinic acid as the catalyst.

160. Conclusion:Vitrectomy with silicone oil tamponade and laser photocoagulation is effective for anatomy and function restoration of detached retina in high myopia.

161. White heat-curable silicone resin composition, optoelectric part case, and molding method.

162. Silicone coated fiberglass sleeving treated at a high temperature is the sleeving braided with non-alkali fiberglass and coated with a special kind of silicone resin.

163. The influence of titanium isopropoxide on the anti-contamination agent curing speed in benzinum solvent , and the influence of methyl hydrogen silicone fluid and titanium isopropoxide content...

164. The solvent-free cationic organic silicone polymer emulsions were prepared and used as handle agents for leather top finishing in the paper.

165. Objective To report a nee simplified silicone oil removal surgery for aphakic eyes.

166. High impact and low wear Polyoxymethylene (POM) blend was prepared by melt blending of POM with copolyamide (COPA), silicone grease, oil carrier and surfactant.

167. The ethyl groups replace oxygen in the silicate ion chains, creating a solid but crumbly silicone polymer.

168. Silicone material has been widely used in power system to prevent pollution flashover of outdoor insulation.

169. This test summarise incidence rate, risk factors, nosogenesis and clinical therapy of silicone oil glaucoma.

170. Built into the silicone are realistically placed and sized "blood vessels" that are connected to an artificial blood source that supplies the tissue with realistic bleeding.

171. The influence of silicone and VAc content on the water proof performance was investigated.

172. The effect of the composition on the property of addition-type silicone rubbers is especially described. The recent research progress in the silicone rubber encapsulated electronic parts is reviewed.

173. A second piece of silicone sealsthe PZT in, creating a pliable, biocompatible material that's fourtimes as efficient as previous flexible piezoelectrics.

174. The silicone front wheel driveshaft CV joint boot will sweat during operation, causing a light film of grease to show on the outside of the front wheel driveshaft CV joint boot.

175. The heater mica sheet is a high-temp insulating material made of quality mica materials and high-performance organic silicone resin after melting and laminating process.

176. In this article the authors explored a new grease of silicone fluid under atmospheric pressure, which is compounded by stearic acid, methylic silicone fluid, some other additives, etc.

177. When it comes to playing tough, its rugged, shock-absorbing silicone and hard face shield delivers ultimate protection.

178. Various silicone varnishes can also be baked or air-dried onto glass or ceramic surfaces, but even after this treatment, handling can easily spoil the insulators.

179. Vitrectomy should be considered for complicated retinal detachment. There is an advantage favoring silicone oil tamponade in achieving retinal reattachment.

180. Two-component polyurethane silicone rubber polysulfide rubber chloroprene rubber and epoxy resin sealant of this type are generally completed at room temperature vulcanization.

181. Methods:32 cases of canalicular laceration were treated by canaliculoplasty. All cases were performed with silicone tube double-passage annular canalicular intubation.

182. Watch as main imported raw material production, environmental aspect silicone with South Korea, without clasp formula of the anion of Tourmaline powder (ge), powder and configuration.

183. A silicone oil bubbler provides a positive gas pressure head inside the growth tube at all times.

184. Silicone has the longest lifespan of any of the Room Temperature Vulcanized rubbers or elastomers.

185. Most women have no signs or symptoms when a silicone breast implant ruptures.

186. The room temperature vulcanized (RTV) silicone rubber coating on the surface of insulator can incrcase the flashover voltage of insulators due to the migration of hydrophobicity of RTV coating.

187. Objective To observe the effect of three - incision oil remover after vitrectomy combined with silicone oil tamponade.

188. Products and Prossing Application: Fluorine and silicone coating, Fluoroplastic, Fluorine elastomer, Anticorrosive equipment, etc.

189. The first part mainly describes the level of epoxy-filling material, fluoropolymer, silicone, polyimide, Nomex and etc. , the properties of new products and the production in China.

190. Yana Yakovleva is the financial director of a Moscow company that manufactures silicone.

191. To match technology, we added a burst of color to our silicone Vroom case, keeping you on the move, getting things done, in bold and sporty style.

192. Silicone acrylic resins can be either the reaction product of a silicone intermediate with acrylic monomers, or a cold blend of silicone resin and acrylic polymers.

193. Obejective To explore the surgical methods of augmentation melonoplasty using silicone prosthesis of small intraoral vertical incision and reduce the postoperative complications.

194. We are looking for a supplier of the silicone - coated wire we use for jacket harnesses.

195. Methods Three incision vitrectomy with intraocular foreign bodies extraction and retinal reattachment, endophotocoagulation, C3F8 intraocular injection and silicone oil tamponade , et al.

196. Made by Nike . Suitable for all ages. Shatter resistant neoprene gasket . Single silicone strap.

197. Spray the ground-joint area with a food grade silicone spray or apply bees wax to enhance seating.

198. Concentrate hydrosilicone oil, tetramethyl dihydro disiloxane, hexamethyldisiloxane and D4 were used to synthesize the cross linker of low-hydro silicone oil required in experiments.

199. Barry Trimmer flicks a small switch and the wires contract, causing the silicone to bunch up; the skin crawls, so to speak.

200. Objective To evaluate the color stability of SY-1 silicone elastomers immersed in coloring agent.

201. Solid silicone rubber is still the major clinical applied materials in rhinoplasty.

202. Figure 1 - 2 shows the organization of blood vessels in a rat kidney injected with silicone rubber.

203. Methods Seven eyes of 7 patients with ocular penetrating injury complicated with endophthalmitis underwent vitrectomy combined with silicone oil injection.

204. The modified one package room temperature vulcanizing silicone rubbers without removal of alcohol released during the crosslinking process were reviewed with 37 references.

205. Heat- shrinkable silicone rubber tube is design and development to insulation protection electronic part .

206. A polymer containing special element as a tackifier is synthesized, and the tackifier can be used to improve the self-fusing properties of silicone rubber.

207. If a silicone breast implant ruptures, the leaking silicone gel may cause inflammation of the fibrous capsule and the formation of additional scar tissue.

207. try its best to gather and build good sentences.

208. The results showed as follows: low temperature or packing with polyethylene film bag with silicone rubber window pouch could decrease respiration rate of chinquapin fruit.

209. Made of high quality food grade silicone materials with FDA & SGS certificate.

210. Silicone resin its functionality in addition to the shrink proof hole, and leveling, anti - floating, antiblowing paint.

211. There is a difference between a padded bra and silicone implants—the padded bra can be safely removed after it has served its purpose; the "porn boob" has rendered the bra meretricious, obsolete.

212. The proper proportion among of sulphited oil, chlorcosane, and silicone oil in weight is 25:6:2.

213. Objective To observe B-scan ultrasonographic features of eyes with silicone oil tamponade after retinal reattachment surgery.

214. The silicone quaternary was synthesized reaction of - H silicone, unsaturated - ether, chloroacetic acid, dimethylamine.

215. Methods Use cyclodialysis and insert of silicone band combined with vitreous aspiration and intracameral air injection in the treatment of refractory glaucoma, a total of 13 cases were summarized.

216. Prevention and management of complication of augmentation rhinoplasty with silicone . Lu kaihua, Liu Jianbo , Ai Yufeng.

217. High tear strength silicone rubber was prepared using two kinds of silicone rubbers with different vinyl content, hydrogen-containing silicone oil and a blending vulcanization system.

218. The production methods and technical features of monosilane, silicone oil, silicone water-proofing agent and silicone resin using the high boiling silane were described.

219. Room temperature vulcanizing (RTV) silicone rubber coatings can improve the insulation strength particularly under wet and pollution conditions.

220. Some 1500 litres of silicone later, the plastination of the giant cephalopods was completed in January.

221. Effects of foaming agent, vulcanizer and the match of the two on the compress stress relaxation of the silicone rubber foam were studied.

222. An epoxy modified silicone resin, which had the features of epoxy and silicone resins, was prepared by the polymerization of epoxy resin with compatible and reactive silicone oligomer.

223. Performance Oriented silicone water repellent agent was prepared with alkyl alkoxy silane as active ingredient. Detailed analysis of various factors affecting products was made.

224. The effect of sintering process and glass content on the coating properties was researched. A heat-resistant silicone resin is selected as a good coating of organic material by TGA and IR test.

225. AIM : To study the effects of silicone band suspension in the treatment of fixed esotropia.

226. Conclusion:Under the ozone aging condition, the SY-1 silicone elastomers stained with oil pigment and inorganic salt may have better color stability than that with gouache color.

227. The anti-crease finish of natural silk with silicone containing epoxy emulsion crosslinking agent EPSIB was discussed.

228. Conclusion biometry in silicone oil-filled eye is accurate and simple, and also has good results in clinical use, so it can be widely used.

229. The hydrophobicity recovery of HTV silicone rubber after different corona duration was investigated contact angle method.

230. Reversed - phase precipitation; gas chromatography; methanol; residual monomer; silicone acrylate resin.

231. Silicone rubber and plaster of Paris have been used successfully.

232. Amino silicone oil has been already applied in fabric finishing for its good absorbability and reactivity.

233. Conclusions This simplified silicone oil removal surgery for aphakic eyes is simple, safe, effective and deserves to broadcast.

234. Influnce of molecular structure of organopolysiloxane on properties of silicone acrylate emulsion was discussed.

235. All Ball Valve are assembled with non - silicone lubricant.

236. Objective: To observe the effect of the application of silicone tube double-passage annular canalicular intubation in the treatment of canalicular laceration.

237. HTV silicone rubbers filled with three types of fumed nano silica were also prepared for comparison with HTV silicone rubber reinforced by hydrophobic nano silica sol.

237. try its best to collect and build good sentences.

238. Silicone - acrylic resin is made of silicorie, acrylic acid and acrylate in different ways.

239. The process involves taking titanium dioxide and treating it with silica, silicone grease or silicic acid for a few minutes.

240. Wear-resisting, flame retardancy is good, have self-extinguishing RTV silicone compound, of glass, ceramics, metal good bonding.

241. Degassing : Degassing of liquid with high viscosity, such as epoxy and silicone.

242. All these factors relate to lentectomy, vitrectomy, anterior proliferative vitreoretinopathy, silicone oil, and gas for tamponade.

243. Silicone modified polyacrylate pressure-sensitive adhesive was prepared by emulsion polymerization using 3-methyl propyl trimethoxy silane(MPTS) and acrylic ester monomer as raw materials.

244. A silicone - polyether copolymer was synthesized by the hydrosilylation of silicone oil containing hydrogen and unsaturated polyether.

245. Ingredients: olive extract, moisturizing factor, rrimethylglycine, glycerol, propylene glycol, silicone.

246. In the dispersion of microparticulate titanium oxide, the content of silicone oil relative to the total hydrophobic dispersion medium is preferably 10 to 100 percent weight.

247. By mixing a sort of organic silicone liquor, permeable agent and viscous agent at a certain proportion, a kind of permeable water-tight agent has been compounded for asphalt pavement.

248. Objective : To study the microphase structure of silicone elastomer reinforced cross - linked polystyrene.

249. AIM:To explore the effects of thermal aging factors on the color stability of the SY 1 silicone elastomer so as to select the best pigments for its clinical application.

250. Water drops can only accrete on the surface of silicone rubber at discrete form because of its hydrophobicity.

251. The silicone rubbers reinforced by MQ silicone resins had high transparency. The tensile strength of the silicone rubbers increased first and then decreased with increasing vinyl groups in MQ resin.

252. Finally, five addition type liquid silicone rubber get by five unvulcanized rubber vulcanizing containing hydrogen silicone oil respectively , they were vulcanized well.

253. It relates to technical progress of silicone bonding agent resistance to heat both at home and abroad.

254. Silicone polyesters resins are the reaction product of organo-siloxane intermediates and a suitable polyester resin intermediate (typically characterized by the absence of drying oils ).

255. All wetted rubber parts shall be manufactured from silicone or chloramine resistant EPDM rubber.

256. And the IR analysis shows that silicone resin possesses hydroxyl end group.

257. A novel type of silicone polymer,() organic polysilane interrupted by heteroatoms was introduced.

258. Ever since silicone turned out to be dangerous, collagen has become the hot item to I gave injected to smooth out wrinkles or to puff up thin lips or weak chins.

259. Solving the problem of low sulfofication extent in the preparation of silicone foam and enhancing the drawing performance of silicone foam.

260. The color changing of fabrics treated by most amino- silicone softener has close relation with amino value, emulsifier and process.

261. High-boiling silicone oil is methyl silicone that contains active methoxy, ethoxy groups , it easily cures film.

262. It was followed by Ultimo's plunge bra, which used the same silicone as breast implants.

263. Curing process is an essential step in the preparation of silicone resin coating, in which polycondensation of multi-silanol mainly occurred in a non-solvent system.

264. The chemical substance extraction test and cell relative growth rate test were car-ried out on the 4 kinds of medical heat vulcanizing silicone rubbers from China and foreign countries.

265. Silicone rubber tube glass fiber casing, is woven E-glass fiber tube, coated with high temperature silicone rubber is made.

266. The Shinetsu silicone products can be applied as vehicle, modified material of resin, water- repellency , adhesives, antifoaming agent and various paints additives, etc.

267. FA 9870 is a solvent based silicone polymer. It can provide slippery, slightly waxy feel(), improving the resistance to heat without damaging the bright or the transparency.

268. A silicone oil bubbler provides a gas pressure head inside the growth tube at all times.

269. Silicone rubber suction cup for the treatment of genital, skin, male genitalia only.

270. This paper discusses the softening effect and mechanism of amino- silicone in treating linen fabric.

271. The formulation, vulcanization and property of polyether rubber modified by silicone are described in this paper.

272. NBR rubber O-rings provide trouble-free operation at standard temperature ranges. For high and low temperature applications Viton or Silicone.

273. The varieties and morphologies of silicone resin products, as well as the synthesis and application of methyl silicone resin and methyl phenyl silicone resins are described in this paper.

274. Terminals: in explosive situations must complete sealing of the terminal box, the general situation can also be used heat shrink tubing and quick-drying silicone seal.

275. Room temperature vulcanized (RTV) silicone rubber can effectively prevent the secondary discharge on space high-voltage array.