1 He is an early riser.

2 He was an early riser and he would be at the breakfast table at seven.

3 A red squirrel was another early riser.

4 Dole aides began to dismantle the camera riser.

5 Give a man a reputation as an early riser and he can sleep 'til noon. Mark Twain 

6 Do you consider yourself an early riser or is that just the effect you have on men?

7 Joan had been an early riser ever since she was a child.

8 Adjust the riser tensioners as required.

9 Our manager is an early riser.

10 Get the riser handling tools ready.

11 Sulfur content of gasoline reduces gradually along the riser.

12 Pick up the marine riser.

13 Under different pressures the flashing in riser of natural circulation system and its effect on flow stability were studied by the method of visual observation in synchronism with data recording.

14 In the riser,[] severe particle clustering existed and the particles in clusters showed evident backmixing.

15 Attach the riser tensioners, choke and kill lines to the slip.

16 Aurelio Escovar, a dentist andvery early riser, opened his office at six.

17 Moreover, new structures of the riser reactor ends can also suppress the coke deposit on the FCC unit so that the on-stream period of the unit can be prolonged.

18 With increasing riser height, the average solid holdup at various axial locations of the riser decreases and becomes more uniformly distributed along the riser height.

19 With the riser height increases, the mass fraction of heavy oil reduces, while the weight of gasoline, LPG, gas and coke has been increasing.

20 It was worse in his case, because he was a reasonably early riser.

21 A much larger crowd of cameras and reporters stood on a riser in the back.

22 The solidification and feeding process of steel casting - riser system is simulated with numerical dimensional temperature field.

23 So I think it might be helpful to become an early riser for a few months first before attempting polyphasic sleep.

24 Reaction rules of FCC light naphtha upgrading and FCC naphtha recycle and reflux upgrading have been investigated with FCC catalyst in the bench scale riser FCC unit.

25 Generally, from the bottom to the top of the riser, the axial profiles of the averaged solids holdups become more uniform with the increased riser height.

26 The nonlinear differential equations of motion for a parachutepayload system are developed, which model the parachute suspension lines and the riser as inelastic elements.

27 In order to research its natural circulation, the downcomer part and the riser part is distinguished, where there are no mass and energy transferred between them.

28 Rear Admiral Mary Landry today directed BP to launch a new procedure whereby the riser pipe will be cut and a containment structure fitted over the leak.

29 The axial lateral mixing behaviors of solid particles in a riser with blunt internals were studied.

30 The original casting processes were optimized by enlarging the riser, changing its position and adding the chill block.

1 He is an early riser.

31 A telescoping joint at the surface in floating offshore operations that permits vessel heave (vertical motion) while maintaining a riser pipe to the seafloor.

32 Note: Riser Pipe & Sleeve Pipe are the same length.

33 Move the BOP to the moonpool door and attach the marine riser.

34 The velocity transient signals of particles in riser a laser Doppler velometer.

35 The exothermic riser head which uses the LYH-3 dextrin as binder is superior to enhance and make the best of the thermal efficiency for the casting shrinks.

36 Efforts will now focus on severing the damaged riser pipes that lay crumpled on the ocean floor, then installing a containment device that could capture the leaking oil and syphon it to the surface.

37 The shrinkage reason of roller neck connecting with riser was analyzed.

38 The differential equation for the vibration of the riser system is derived by means of functional calculus of variation.

39 I figured I must have been born without the early riser gene.

40 By comparison of five kinds of riser, the paper recomends the casting process design of side-blind riser which can assure the casting quality and reduce the casting cost.

41 According to conventional sequence solidification principles, de-signing riser size of heavy castings by proportionally magnifying the heat center circle is wrong.

42 The technology is equipped with a catalyst mixer at the bottom of the riser, which can produce an ideal circular flow of catalyst before the catalyst contacts with the feed oil.

43 The water flow velocity in the suction pipe, which is crucial for evaluating the performance on pumping fish, can be measured by the pumped water flow rate of the riser in an air lift pump system.

44 The flux in the riser reactor is close to plug flow, which greatly demotes the back mixing.

44 is a online sentence dictionary, on which you can find excellent sentences for a large number of words.

45 During the process of Weizhou12-1B Oilfield we ll drilling, downhole instance is complexity, and drilling time is longer, so drilling riser pipe has to have a good depth stability.

46 The results show that the radial distribution of particle velocities always becomes less uniform along the riser height and finally reaches a parabolic profile in the upper section.

47 Macro-segregation of a steel ingot in a rectangular mold with a riser was simulated and the calculation result was compared with that of an experiment.

48 Utilizing peculiarities of platform cluster well groups the cross operation technique of riser pipe, surface and oil formation is executed to improve drilling efficiencies.

49 It shows that the modal shape and mode frequency are highly coupled with the VIV response of a marine riser with low mass ratio.

50 Check point should be set on water drainage riser each level. It should be set at lowest level and highest level which has sanitary fittings.

51 The drift flux model was used to study gas hold-up in riser.

52 Remote-controlled machines smash the sulfide deposits, which are then hoovered up through a riser pipe to a vessel on the surface.

53 Engineers will now lower a containment cap to the seabed and attempt to fit it over what's left of the riser pipe.

54 A rectangular clear box features as a product riser for show window display purpose. A number of elements put together can form different height and shape for various display needs.

55 According to the results and combining with theoretical analysis, the casting process was improved by increasing the size of riser neck and chills and adding the number of the riser.

56 The results show that the gating and feeding system without riser is reliable through calculating the sizes of gating system by moduli calculation method.

57 The test results show that by controlling the T-junction and riser tube's resistance coefficients, the unbalanced riser flow distribution has been achieved.

58 I use smooth - on epoxy to glue the riser and the limbs.

59 Vibration and offset of riser system in marine drilling under the alternating action of wave force, if terrible, may cause failure of drilling tools and break-off of drilling.

60 It has been found out that the defect was caused by adopting the foundry method with a cold riser which actually acted as a cold metal bleeder.

61 FCC performance of CHV 1, LV 23 and an imported catalyst was tested using XTL 5 riser pipe pilot plant.

62 According to gas velocity, gas-solid fluidization has been classified into low-speed riser, cocurrent downer and pneumatic fluidization)in this paper.

63 Enter target riser height to be used in calculating the number of risers.

64 Random vibration and offset of riser system in marine drilling under the random wave force, if terrible, may cause failure of drilling tools and break off of drilling.

65 Using a stencil I then draw out the shape of the riser.

66 A formulation to analyse the large displacement problem of a marine riser with two unequal principal moments of inertia of the cross section in the 3-D space is presented.

67 According to continuity law of hydrodynamics, theory equation between riser gas holdup and downcomer gas holdup in TBCR is derived, and value of the important parameter a in the equation is discussed.

68 So being the proactive goal - achiever I was, I set out to become a habitual early riser.

69 In the operation progress of offshore exploratory well, the strength and stability of drilling riser can play an important role in offshore drilling and completion.

70 The frontal riser of the first pediment surface (P1) is the most recent fault scarp or diluvial platform; at the foot of pediment P1 outcrops the fault.

71 The heat input of gasification using coalite as solid heat carrier comes from combustion heat of the solid heat carrier in riser.

72 Riser Pipe: A four-foot-diameter steel pipe called a riser connects the ship to the borehole.

73 Drilling riser is an essential device for Marine drilling operation, so its safety and reliability must be guaranteed. Vortex-induced Vibration (VIV) is ...

74 Feeding effect can be improved with qualified casting using side riser gating system for plate or heavy concave aluminum alloy casting.

75 The intensification of combustion process is first discussed. Then, the structure,[http:///riser.html] test and application of low-pulsating riser pipe burner are described.

76 Strength and security of riser play an important role in offshore drilling and completion.

77 Considering large deformation and mud inside drilling riser, effects of top tension ratio(TTR) and vessel offset on internal force and deformation were studied.

78 The effect of the aeration to the pyrolysis chamber on the pressure distribution of the standpipe was more remarkable than on the riser.

79 The ideas for further development of the residuum catalytic cracking reaction technology according to the problems of commercial riser were discussed.

80 The basic theory and technical points of a new kind of lap gate(riser)adopted to produce iron castings of wheels are discussed and good economic results of this technology in product...

81 There is abnormal bottom shrinkage in Zn Al alloy castings and top riser has little effect on them.

82 Sand the riser area, apply the CA glue to every surface.

83 Synopsis: This paper introduces the position and characteristics of the blow hole shrinkage in the side riser of cast steel castings and probes into the formation mechanism and its prevention.

84 The ratio of downcomer to riser cross sectional area, the bottom clearance and the ratio of height to diameter of the reactor are proved to be important of the cell growth behavior.

85 Back in the yard, Michael sits on the top riser of the bleachers, directly above the bolt.

86 DW goes base line riser, yeah, that's a big time player make a big time shot.

87 The gas - solid heat transfer coefficient will decrease when height of riser increases.

88 Shares in ARM were up 3.1 percent at 399.7pence by 0817 GMT, the top riser in the FTSE 100 index (.FTSE), and setting aeight-year high for the second consecutive day.

89 An internal airlift loop reactor(ALR) is built , with air- water two - phase mode as the object of study, a manometric method is used to determine the gas holdup in the riser and downcomer.

90 After canceling the cold riser the shrinkage problem was successfully solved.

91 The basic theory and technical points of a new kind of lap gate(riser)adopted to produce iron castings of wheels are discussed and good economic results of this technology in production are also...

92 The top riser vent with big mesh size has excellent ventilation. It also effectively guard against flies.

93 The causes behind breakage of the catalyst are excessive sodium and vanadium content in the feed oil, excessively high regeneration temperature and excessively high steam velocity in riser pipe.

94 The particle velocity distribution in the FCC riser was determined. An anti back mixing structure with changing diameters and tangential direction secondary injection was proposed.

95 Based on the principle of volume contraction of freezing, the designing process of riser fitting to the cast steel inserted die with exothermic covering flux has been studied.

96 In accordance with proportional solidification principle and limited feeding method, a series of top riser size is recommended to heavy castings .

97 The chill block hanged sand and the riser were used to optimize the original casting process. Finally the shrinkage of the casting was eliminated.

98 The displacement of each mode is determined by a balance between the energy fed into the riser over lock-in regions and the energy dissipated by the fluid damping over the remainder.

99 Based on the design method of S. I. Karsay gating and risering and practical experience, Usering FOXBASE program software used to design riserless or small riser system was developed.