(1) Use the right size extruder for the lot size.

(2) This production line is mainly composed of mainframe extruder, screen changer, mould, sheet embosser, sticking device, conveyor, haul- off unit, winder or cutter.

(3) Production capacity: refers to the largest extruder extrusion amount per unit time.

(4) The design of the melting zone for extruder screw was optimized.

(5) This production line includes mainframe extruder, mould, haul- off unit, water tank , cutter and discharge shelf.

(6) ZCJ series twin - screw extruder is a highly efficient agglomerating and extruding equipment.

(7) The process of imported twin screw extruder as finishing equipment of adhesive chloroprene rubber ( CR 244 ) was introduced.

(8) A systematic study was performed on the extruder set via analyses of the factors such as feeding, screw speed, throttle valve, screen pack changer, die plate and pelletizer, aimed at saving energy.

(9) This production line includes mainframe extruder, screen changer, mould, vane, lambdoidal board haul - off units, and winder.

(10) The extruder used process features simple head structure, low price I less space and quality extrudate.

(11) Know extruder, injection molding, chiller, punching machine, lathe machinethermoforming packaging machine, etc.

(12) This production line includes mainframe extruder, screen changer, mould, three - layer distributor, embosser, conveyor, haul- off unit, and cutter or winder .

(13) Tread cooling line is an attachment equipment of extruder. It makes hot tread from preforming, cooling, cutting and drying. Then the semi-finished goods for next.

(14) Rubber insulation material foam production equipment including stoves, extruder, mixer and open chain machines.

(15) This production line includes mainframe extruder, screen changer, mould, three - layer distributor, casting machine, conveyor, haul- off unit, and winder, etc .

(16) For pellet mill, extruder , hammer mill, pulverizer, crumbler, rotary screener.

(17) This production line is mainly composed of mainframe extruder, screen changer, mould, vertical - type three - roller embosser, conveyor, haul- off unit, and winder or cutter.

(18) A method of bean extruder processing parameter optimization combining neural networks with genetic algorithm was presented.

(19) The principle, structure and performance are introduced and compared to those of calender and conventional extruder.

(20) Based above results, the post - processing program is employed to calculate the extrusion characteristics of tri - screw extruder.

(21) The extrusion quality of flaxseed meal was studied with Brabender DSE - 25 Twin - Screw Extruder.

(22) This shear equipment and the sheet die were successively linked to forepart of the single - screw extruder.

(23) Besides plasticizing capacity, the reaction function should be taken into account when a reaction extruder is being designed.

(24) The line is mainly used to produce flow pipe and drainpipe etc. The set is composed of extruder, die, cooling trough, tractor, the cutting machine, plank and electric control system etc.

(25) Then different wood plastic composites were prepared by single - screw extruder, two - roll mill and banbury mill.

(26) The result shows that when addition of EPDM is less than 30%, the dynamic sulfurization result is better by using double-screw extruder than by using double-roller blending rolls.

(27) Melt blending of HDPE and LLDPE, and peroxide initiated grafting copolymerization of vinyl trimethoxy silane(A171) onto HDPE/LLDPE blends were simultaneously studied in a twin screw extruder.

(28) In view of shortage of the existing manufacturing processes, this paper proposed a grinding craft on equal line speed for the extruder connecting block.

(29) The measurment of rheological properties by slit ( capillary ) die on extruder exhibits some obviousadvantages over other rheometers.

(30) Wuxi City, Zhou Machinery Co. , Ltd. major manufacturing XCL300 - 2500T variety of large and medium - sized copper and aluminum extrusion machine double-action extruder.

(31) The extrudate shape, dimension and output can be effectively controlled on single roller extruder with its variable screw and roller speeds and the flexible combination of preform die and final die.

(32) PPTA (polyphenylene terephthalamide) pulp was prepared by semi-continuous direct polycondensation using a co-current rotating and meshing twin screw extruder as main reactor.

(33) Cutting the extruder screw rod with this improved lathe tool makes the processing accuracy and production efficiency increased, thereby reducing the processing cost.

(34) The production line adopts high efficiency extruder, high-speed net changer and spiral blow molding handpiece.

(35) However, the original feed control system of the extruder is obvious aging, out-of date and time-consuming in feeding.

(36) SJSZ series conic twin - screw extruder is professional equipment for extruding kinds of PVC powder.

(37) The screw extruder pelletizer composed of twin screws. Two models are available according to the form of extrusion, which are front extrusion and side extrusion model.

(38) The related control scheme is discussed to solve such problem as nonlinear, lag and close coupling characters of extruder barrel temperature after research.

(39) Use reducer special for plastic extruder with alloy hard - toothed surface.

(40) In the control system of new design tri - extruder, adopted PROFIBUS - DP network.

(41) The simulation and analysis of the pressure distribution in head runner of double plex tread extruder were made with ANSYS FEA software.

(42) PP and PA6 were blended and extruded with a single screw extruder, PA6 could fibrillated in the matrix.

(43) In the thesis, the effect factors of the extrudate temperature have been researched during the processing of twin screw extruder.

(44) This production line includes mainframe extruder, screen changer, mould, water tank , haul- off unit, cutter.

(45) This paper introduced application of intelligent computer control system in single - screw extruder.

(46) According to the theory of motor control and the differences of the twin screw pulping machine and twin screw extruder, the theory of control system has been studied.

(47) The optimal design of convergent channel of extruder tubular head was discussed.

(48) In this paper, reactive extrusion was used to prepare flame retardant PA6 with in-situ formed melamine cyanurate(MCA) from reaction of melamine and cyanuric acid carried out in twin-screw extruder.

(49) Modular system, combination of single - shaft cutter and extruder. No pre - cutting equipment required.

(50) InternalMixer ; Curing Machine ; Building Machine; Daylight Press ; Sheet Extruder.

(51) The software ANSYS and MATLAB were employed to analyze and simulate the velocity, pressure, shear stress and viscosity distribution in fishtail sheet extruder die based on the three-dimensional FEM.

(52) Its overall objective is to enhance the quality and output of China's large aluminum extrusion production,[] and establish hydraulic double-action short trip extruder.

(53) The line use highly active screw extruder that we developed, and it has the characteristics of high speed extrusion and high plasticization .

(54) Moreover, a three-dimensional flow field of the retarded adhesive mortar in a single-screw extruder is obtained after supposition, simplification and carrying on the boundary treatment.

(55) In this paper, the reinforced thermoplastic starch(TPS)materials were obtained by extruding the mixture of TPS and copolyamide with a single scerw extruder.

(56) According to feature of 6A02 aluminum alloy and quality requirement of the shapes, spray quenching and forced air quenching on the shapes flowing bed of extruder were conducted.

(57) We are interested in buying extruder machine for PVC with all accesories. just like crasher mixer.

(58) A simplified mathematic model of the melting zone for extruder screw was established and solved by the complex method to minimize the specific energy consumption.

(59) From simple models of single screw extruder to complex model of twin-screw extruder, the application of numerical simulation on RTD was reviewed; the difficulty and advantage were explained.

(60) Dynamic - vulcanization PP composites were prepared with twin - screw extruder and dynamic - vulcanization technology.

(61) Effects of processing parameters on cottonseed meal de-gossypol results were studied using a twin-screw extruder.

(62) A quasi-3D FE model for a power-law fluid was used to describe the 3D transport process during the processing of defatted soy flour in the melt conveying section of a single-screw extruder.

(63) It was studied that ABS was grafted by MAH, using DTBP as initiator, and reacted in twin-screw extruder.

(64) Extruder: Parallel double screw extruder is characterized by high output and good plasticization. The vacuum exhaust improves products quality. It can process various sorts of plastic.

(65) This twin screw extruder has the feature of one-side circumgyrate, it's an ideal equipment for the small-scale factory who produce powder.

(66) The use conical twin - screw extruder, vacuum calibration machine, traction machine, cutting machine, stack machine.

(67) Production lines include extruder. vacuum inspirtation. shape mould. traction. rewinder and waste material rewinder. etc.

(68) Causes of ineffectiveness of plastics extruder screw due to cracking are analysed, briefly intro- duces renovation by welding.

(69) This article introduces simulation analysis methods of twin - screw extruder.

(70) No less than 60 percent of industrial waste can be used by the wallboard extruder.

(71) The auger of the extruder adopts abrasion - resistance metal powder spray - painting technology.

(72) Material feeder system: adopt force feeder, maximize extruder functional performance and stabilize motor load.

(73) This production is composed of conical twin-screw extruder, vacuum calibration table, haul—off unit, cutter and stacker.

(74) The network inputs include extruder temperature, die temperature , melt flow rate, air flow rate, die to-collector distance.

(75) The extruder is outfitted with automatic self-loader, a tunnel for moving unit and long-life net.

(76) This line includes mainframe extruder, screen changer, mould, water ring, lambdoidal board haul - off units, and winder.

(77) This brick machine is a new type all-steel hard shaping vacuum extruder of our company.