1. Scope: Sales thermosetting powder coating thermosetting powder coating.

2. This was mainly thermosetting plastic is too thick.

3. The reason is thermosetting plastic is too thick.

4. Apply to all parts of thermoplastic and thermosetting plastics.

5. Curing agent for thermosetting powder coatings.

6. Thermoplastic and thermosetting substances are called plastics.

7. A thermosetting resin composition comprising a polymer having a methylglycidyl group and an ultraviolet absorbent.

8. The curing process of thermosetting resin matrix composite materials involves complex mechanical, thermal and chemical reactions.

9. Polyester and acrylic acid is the most common thermosetting coating resin.

10. Epoxy asphalt concrete is a kind of special thermosetting material with outstanding road performances.

11. Epoxy resin as a typical representative of the thermosetting resin has been widely used because of its excellent properties.

12. Bakelite is a well - known thermosetting material and it has a wide variety of uses.

13. Microcapsule-type curing agent, method for producing the same, thermosetting resin composition, prepreg and fiber reinforced composite material.

14. Epoxy resin is a kind of thermosetting resin with excellent general performances, but its toughness is not enough.

15. The characteristic of thermosetting polyphenylene oxide resin copper clad laminates as wel as their application in the high frequency printed circuit board is introduced.

16. Thermosetting resin, obtained as reaction product from glycerol and phthalic acid.

17. Epoxy resin is a thermosetting resin with some good features including electrical properties, chemical stability, adhesive, processability and so on.

18. Molding process, equipment and die of thermosetting plastics for injection molding discussed in the paper.

19. Practice for Underground Installation of Flexible Reinforced Thermosetting Resin Pipe and Reinforced Plastic Mortar Pipe (08.

20. Alkyd resin: Thermosetting resin, obtained as reaction product from glycerol and phthalic acid.

21. For - laced nonwovens, the processes to improve the handling properties by after - finishing and thermosetting are introduced.

22. It is expected that this theory can be extended to other thermosetting resin systems cured by hardener.

23. Composite nitroamine propellant is composed of 70 % ~85 % nitroamine and 15 % ~30 % thermosetting binder.

24. The sand inclusion glass fiber reinforced plastic pipe takes thermosetting resin as base body(/thermosetting.html), take glass fibre and its products as reinforced material.

25. As a substitute of cadmium red and chrome red, is a match environment red pigment. Used in thermoplastic resin, thermosetting resin, alkyd resin, rubber, other polymer and cement, coating.

26. A composite material, e. g. a metal impregnated with lubricant or a casting impregnated with thermosetting resin, can be obtained using the inventive vacuum high pressure filling equipment.

27. The phenol resins and plastics were the original synthetic thermosetting materials.

28. Attention was paid on how to lower the production costs in the processing of thermosetting plastics, which covered the fiber orientation, removal of burr and sprue runner material loss.

29. The electric heating air bag is used to heat and solidify thermosetting resin of the lining material added in the pipeline.

30. The protective coating on aluminium foils packaging for medicine was formulated with thermosetting acrylic resin, pyroxylin.

31. The structure, operating principle and action of mechanism of automatic sprue cutting by ejector pin in thermosetting plastics injection mould was described.

32. Its branch chains having double bond can copolymerize with vinyl monomers (such as styrene or vinyl toluene) forming a thermosetting resin.

33. This article introduces the technological method of using glass fibre tubes to solve the splitting problem from the weld line after the forming of the thermosetting product "pedestal".

34. To address this issue, jet molding, offset molding and screw-type machine molding liquefy the thermosetting plastic just as it passes through the injection nozzle into the mold.

35. Press forming of plastic products can be classified into thermosetting material forming and thermoplastic material forming. For example, bakelite of electric appliance industry.

36. The specimens made from Bayer tooth, thermosetting plastic, copper base alloy, titanium and its alloy have relatively good wear resistance as well and are thus idea prosthetic materials.

37. Radiation instantly polymerize the vehicle to a dry, tough thermosetting resin.

38. The important raw materials usually used in such thermosetting resin are bakelite , and metallographic specimen inlaying machine will be used in the same process.

39. The constitution of electrical control system in thermosetting machine with all digital communication was introduced as well as its main controlling function.

40. A new kind of thermosetting epoxy modified acrylic varnish for metallic electroplated parts was developed.

41. Curing transfer products needed to a standard of thermosetting oven or Flash dryers.

42. Burr processor technology development ,(http:///thermosetting.html) product description sandblasting - Burr Processor : thermosetting plastics products for the treatment of Burr.

43. A thermosetting resin made by a condensation reaction of a melamine derivative, trimethylolmelamine, C3N3(NHCH2OH)3, with formaldehyde.

44. Luminous painting with crystal-glass effect is made by coating with thermosetting resin. and screen printing with photo- luminescent paste.

45. The scientific research institute has developed a new thermosetting material.

46. Cyanate ester resins (CE) have become a new and unique class of high-performance thermosetting resins for being used as advanced matrices in both electronic and aerospace industries.

47. The type of cyanate ester resin (CE) and its modification by thermosetting, thermoplastics, rubber elastomer and unsaturated compound with double bond are reviewed.

48. Thermosetting ink by dissolving in water and solvent - based.

49. Only the thermosetting resins provide a strong cohesive forces; this is due to molecular cross linkages.