1. Worker at carbon black plant.

2. Carbon black is the most usual black pigment.

3. The ozone oxidation of carbon black surfaces was studied.

4. In order to obtain self-dispersal nano carbon black pigment.

5. Photo by Worker at carbon black plant John Vachon.

6. Carbon black, graphite, alcohol, paraffin, rubber binding admixture, etc.

7. The relationship between electrical conduction and carbon black content was determined.

8. A more conductive carbon black part typically has a more mottled, duller surface.

9. The coacervate particle of carbon black consists of lied graphite layers.

10. Carbon black: A fine, intensely black pigment obtained by burning natural gas or oil with restricted air supply.

11. It appeared that combustion of carbon black occurred simultaneously with these devolatilization products since, upon extinction of this flame, no further residue was detected.

12. The oxidation further enhances the physical properties of carbon black filled nitrile butadiene rubber ( NBR ) .

13. The latest advances in the dispersion of carbon black in aqua - system are reviewed.

14. Introduced the particles broken and reason caused while carbon black pneumatic conveying in rubber factory.

15. As a kind of the conventional absorber, Carbon Black (CB) has been extensively used due to Its high electric loss.

16. Carbon black is an opacifier which prevents radiant energy transmission to the interior of the propellant.

17. The dyeing properties of carbon black water dispersoid and the compatibility between nano carbon black and disperse dye on polyester fiber were discussed.

18. It has a nominal durometer hardness of 55D and contains fine particle size carbon black.

19. The effect of testing conditions on test results of acid oxygenous groups on carbon black has been studied detailedly.

20. Corundum refractory material is an excellent lining material for carbon black reactors and can be used for a long time in the reducing atmosphere.

21. DSC and TPO were employed to study the stability of the support and the catalytic performances of several metal oxides catalysts in abating the carbon black particle microsome(PM).

22. The conductive behavior of asphalt mixture can be improved by adding carbon black, graphite and fiber.

23. The heat aging resistance in creased first then decreased with the increase of amount of carbon black N550.

24. The method realizes the preparation of the aqueous nanometer carbon black color paste by means of a sand grinding oxidation one-step method.

25. The gasification furnace could completely use deoiling asphalt as feedstock after adding carbon black flashing and filtering system in the fertilizer unit.

26. Our company mainly deals in chemical products like titanium, lithopone, carbon black, and sodium hydrate. We also supply oxalic acid, acetic acid, iron oxide, copper oxide, zinc oxide, and so on.

27. The resulting combustion gas mixture, in which the reaction is occurring, then passes into a reaction zone where completion of the carbon black forming reaction occurs.

28. This paper described the effects of bead mill size and dispersant chemistry on particle size reduction for difficult to disperse carbon black pigment.

29. The unsaturated vinyl group could be introduced into polymer by the reaction of isocyanate with hydroxyl group and the UV-curable carbon black dispersant could be obtained.

30. The results showed that the mechanical properties of vulcanizate filled with N660/N330 and N660/N990 were medium between two carbon black filled individual.

31. Through study the effect of carbon black filler content on conductivity, oil furnace carbon black with good economy and technology was selected.

32. It has a nominal durometer hardness of 53D and contains fine particle size carbon black.

33. A series of antistatic PVC - U composites used carbon black or graphite as conductive fillers, were prepared.

34. The advances in conductive polymer composites filled with carbon black are reviewed.

35. The paper briefly introduced new preparation technology of the wider application of white carbon black which is made by the material of water glass and ammonium hydrogen carbonate .

36. Conductive carbon black and out to offsctdruckereien with the binders to ink.

37. The physical and chemical properties of the carbon black are detected, and its microstructure is analysed by High Revolution Electromicroscopy (HREM) and X-ray Diffraction.

38. Dyestuff, pesticide, silicic acid, glycerin, white, carbon black, sodium chloride, calcium carbonate, assistant, etc.

39. Carbon black is special kind of carbonaceous material on microstructure, particle configuration and surface behavior.

40. Positive temperature coefficient ( PTC ) effect of carbon black ( CB ) filled nylon 12 ( PA 12 ) composites was studied.

41. Conductive PE bag is made from LDPE, anti-cavitation agent and super conductive carbon black after blow molded by special machineries.

42. Two is the weight of a carbon black products there is a certain weight particularly light may be made by charcoal which did not reach the adsorption effect.

43. In the carbon black literature, this reaction between the combustion gases and the hydrocarbon feedstock is generally referred to as pyrolysis.

44. The influences of carbon black and mineral filler on reinforcement behavior of CM 135 B were researched.

45. The carbon black dispersion for aqueous ink was prepared by sand mill.

46. Along with the development of rubber industry in recent years, more and more pneumatic conveying system is widely used in carbon black transmission process.

47. The property of PP/carbon black conductive composite and the effect of toughener POE on the property of the composite were studied.

48. The blend behaved better when adding carbon black and talc at the ratio of 15:15.

49. The enhanced low-temperature thermoplastic material comprises the ingredients by weight ratio: 43 to 95 portions of polycaprolactone and 5 to 57 portions of carbon black.

50. According to the technical requirement of oxygen system lubricating grease, hydrophobia white carbon black was selected as thickener and was compared with thickener F46 in application behaviors.

51. Carbon blacks are generally produced in a furnace-type reactor by reacting a hydrocarbon feedstock with hot combustion gases to produce combustion products containing particulate carbon black.

52. The process characteristics and main equipment of carbon black production with oil - furnace method are described.

53. The results showed the conductivity of HG 4 carbon black was the best, and that of ACET carbon black was poor.

54. In North America, white carbon black consumption is basically a car tire manufacturer in Europe controlled.

55. The results indicated that carbon black could promote the hydrogen transfer from tetralin to anthracene.

56. At present, Cabot China has successfully localized the production of rubber carbon black products, specialty carbon black products and fumed silica products in mass scale.

57. RFT plans to construct a commercial plant located at the Marl Chemical Park in Germany that will produce commercial quantities of fuel oil, gas, carbon black and other products.

58. High reinforcing white carbon black is prepared from phosphate fertilizer by - product fluosilicic acid.

59. Carbon black was blended into thermoplastic polyurethane, the electrical conductive fiber was obtained by melting spinning.

60. It has nominal durometer hardness of 54D, is pigmented black with fine particle size carbon black, and contains a general purpose stabilizer.

61. High reinforced white carbon black is prepared by using phosphate fertilizer's by-product fluosilicic acid as raw material and ammonia water as ammonia analytical agent.

62. Introductive takeaway: carbon black pneumoconiosis (black platinum pneumoconiosis) because of long-term and inspiratory high concentrations of carbon black dust caused a pneumoconiosis.

63. Two kinds of light-shield agents of ZnO and carbon black were used to improve the ageing-resistance of polyacetal(POM).

64. The results showed that nano carbon black dispersoid had high dye-uptake on polyester fiber modified by reagent EP in advance and good compatibility with disperse dye./carbon black.html

65. Research of the nano carbon black cement mortar electrical and electrothermal properties.

66. The formula consists of NR/BR blend, high temperature-stable insoluble sulfur and delayed action accelerator, new technology carbon black with low structure, Gum-easy T-78 and plasticizer.

67. An example of particle-reinforced composites is an automobile tire which has carbon black particles in a matrix of polyisobutylene elastomeric polymer.

68. The influence of carbon black on the slurry viscosity and gelation time was studied.

69. The results showed that nano carbon black dispersoid had high dye-uptake on polyester fiber modified by reagent EP in advance and ...

70. The application of mixed carbon black TST-103 in the inner ply compound of tire was investigated.

71. The application of synthetic wet-grinding mica powder replacing partial carbon black to NBR was investigated by chemical blending.

72. Since 2000, we have recycled carbon black off-gas instead of raw coal as fuel for coal tar process and power plant.

73. The effect of carbon black on burning properties of modified nitramine double base propellant was detailed in this paper.

74. High molecular weight alkali soluble polymer used as a binder and thickener for manufacturing carbon black inks.

75. The processibility of NR/ENR vulcanizate was improved with different size carbon black mixing.

76. Different size carbon black mixing can decrease the dynamic storage modulus (E') and broaden the damping range of NR/ENR damping material.

77. With rising energy prices, foreign companies began to actively use of carbon black with higher temperature air preheater .