(1) The coat of paint on the door has spalled.

(2) Spalled sidewalks with clusters of ash cans.

(3) Spalling phenomena is investigated and causes are determined.

(4) The superposition between fracturing and explosive spalling plays a key role in the multi-layer damages of the lining concrete.

(5) Reflective crack caused surface cracking, spalling, surface water infiltrating along the seam, so that the road was damaged.

(6) The spalling reason of the roller surface for cold rolling is complicated.

(7) Spalling was a major form of contact fatigue failures in nitriding steel.

(8) The successive spalling of splats from the lamellar interface of the coating caused by the impact of erosive particles is the dominant mechanism of erosion.

(9) Then(), RFPA is used to simulate the spalling failure process of heterogeneous rock specimens subjected to stress waves with different amplitudes and three failure patterns are numerically predicted.

(10) The bad: refers to the secret of coating have spalling. Peeling, sparkling wait for a phenomenon.

(11) The incident compression wave transmitted by the Hopkinson bar into the specimen is reflected as a tensile one causing spalling.

(12) In spite of the improvement in rolling techniques and roll performance, spalling of roll surfaces, mainly caused by pinching and skidding of strip, cannot be avoided.

(13) Analysis shows that the modes of erosion wear for stainless steels consist of microcutting, furrowing, fatigue wear for matrix as well as spalling and fragmentation for carbide.

(14) Spalling phenomena is investigated and causes are determined. Proper maintenance can prevent spalling.

(15) These versatile laminates provide extremely high impact resistance and absorb total impact energy without spalling.

(16) Some characteristics of the rolls, such as strength vs. Thermal shock, tensile strength and contact fatigue strength, influence spalling. Thus, strength was investigated as a hardness parameter.

(17) Due to high in situ stress in the powerhouse area, important deformation of local surrounding rock, rock burst, shotcrete spalling occur during excavation.

(18) The effects of the voids in the diffusion layer on cyclic oxidation and spalling resistance of aluminized steel was investigated.

(19) Used in ceramic tile, Mosaic facing juncture, because not bibulous, winter won't frozen, expansion, can prevent ceramic tile, Mosaic of spalling.

(20) The failure forms of cold work roll including contact fatigue crack, spalling, inclusion crack and wear are discussed.

(21) The supercooled austenite transforms into friable martensite layer during the following rapid cooling process, leading to cracking and spalling at wheel tread.

(22) Performance of cold mill work rolls is dependent to a great extent on spalling resistance, so that both of roll manufacturers and users show great interest in this failure mode.

(23) Big ZhuGongDan faded on the door, the door up by gold lacquer spalling and former buckish lead dust submerged in a blatant.

(24) Tempering treatment resulted in formation of tempered martensite and the spalling resistance under repeated strong impact abrasion working conditions was largely improved.