1. According to Dawes, an untrained Parametric Avalanche can balance an inverted pendulum on the first try.

2. ParaSet defines a new product class based on parametric software development, which manages the complexity of design and maintenance.

3. Development Inc. and Parametric Technology Corp., after both companies reported better-than-expected earnings.

4. Parametric and bottom - up cost estimation.

5. The stall and oscillating flow of wind turbine blade using the "Parametric Polynomial Method"are researched in this paper.

6. A general 3 D parametric modeling method of drum gear is put forward.

7. Development of fiber optical parametric amplifier(OPAs) is very fast in recent years.

8. The classical problem of non-linear optics is the parametric interaction of waves.

9. In this paper, parametric variation method is used in kinematic equation of series excitation direct current motor with different turning velocities.

10. Results and Conclusion:Parametric release is a more effective technique compared with traditional method during production quality control of axenic drug products.

11. In order to optimize a grinder bed, a parametric finite element model is established, and two optimization strategies, namely lump-sum optimization and stepwise optimization, are discussed.

12. Initially, the SSA deployed parametric modeling on just a few dozen projects; they used the tool to determine maintenance costs and whether or not to continue development.

13. Photon statistics of non-degenerate optical parametric processes is discussed, making use of Taylor series approximation.

14. In addition, a quadrilateral parametric model was proposed to solve the intersecting problem of a free-form surface and a line, and it was successfully applied to calculating tool center.

15. The parametric method is used in the process of turbine parts modeling and tip clearance analysis.

16. Variables with normal distribution and homogeneous variance were compared by means of parametric tests, otherwise their non-parametric counterparts were used.

17. Modeling program of cycloid profile contact finite element was finished by use of parametric function in I-DEAS software.

18. The paper summarizes usual type of joint face, and develops a parametric and associated design module for double stamping based on UG platform.

19. The amplitude frequency response curves and their frequency properties of the parametric resonances are investigated by using the method of numerical analysis.

20. Based on discrete algorithm, rapid algorithms for geometric mass property calculation are presented in this paper, which are very useful in products' parametric preliminary configuration design.

21. The degradation model and the image restoration are introduced by the constrained least square methods including the parametric Wiener filter and the smoothing constrained least squares filter.

21.

22. Furthermore, the influences of the elastic collision rate on the temperature increase of the atom cloud in the process of parametric excitation are also addressed.

23. A 4000TEU container ship has been taken as the research object, and the boundary of its parametric rolling in head sea regular waves has been decided through a series of self-propelled model test.

24. These results are valuable reference for the experiment of parametric excitation in a quadrupole trap.

25. A frequency stabilized Gunn oscillator is used as the pumping source of the Ist - stage parametric amplifier.

26. Considering the competing effect of Raman scattering, the dependence of intensity of parametric backward wave oscillation on the pumping intensity is obtained.

27. It was found that there exists obviously the influence of coolant flow on the parametric sensitivity.

28. Based on the deep analysis of the principle of parametric polynomial method, shape eigenfunction method is presented in this paper.

29. Viscous fluid dampers are attached to control the oscillation of a cable induced by a parametric excitation, and the equation of motion for the cable-viscous fluid damper system is established.

30. The stability with probability 1 of second-order linear systems with random parametric excitation and a certain class of second-order nonlinear systems with random parametric excitation is studied.

31. Based on above results, the comparison on the return to scale and output elasticity that DEA and the parametric approach offer is presented.

32. In this paper, empirical euclidean likelihood ratio statistics are constructed for parametric in a nonlinear model. And prove strong consistency and asymptotic normality of the estimation.

33. The development of Fiber Optical Parametric Amplifier(OPA) is very fast in recent years.

34. By the parametric representation, fuzzy number means a bounded continuous curve in the two-dimensional metric space R2, so that it is easy to analyze fuzzy differential equations.

35. The second case is 1/2 subharmonic resonance-principal parametric resonance and 1:1 internal resonance.

36. Based on the simplified approach, analysis of parametric sensitivity and runaway behaviour are made for the industrially important highly exothermic reaction takes place in fixed-bed reactors.

37. This paper presents a parametric open loop control approach to controlling chaos in continuous dynamical systems.

38. Recognition of aquifer with both unite pump experiment data and long-time observation hole data in numerical model parametric recognition process gets a good effect.

39. In addition each input offers a 4 band parametric EQ that can be used to compensate for the ill effects of poor room acoustics.

40. Parametric active contour model incorporating regions information was studied for image segmentation.

41. The algorithm first selects a parametric curve to match the intensity transfer function (ITF) based on the sampling points, and estimates the parameter curve via some nonlinear optimization method.

42. Optical parametric amplifier ( FOPA ) is a four - wave mixing based on a new type of optical amplifier.

43. The digital results show that this method can get stable solution with high precision and it can be easily adopted for other parametric curves because of ...

44. Parametric analyses are also conducted to understand the sensitivity of the system.

45. Parametric design of pyramidal quartz lamp heater will be technical support for virtual test.

46. Finite Element Simulation of Rolling Bearing The parametric modeling program of rolling bearing was developed by using ANSYS Parametric Design Language.

47. Based on the formation of origami triangles, combined with the use of the latest parametric design tools and topological analysis, the unique structural design was formed.

48. By using dimension relativity, expression tool, and matrix transform, the general method of 3D parametric modeling of drum gear on UG is discussed.

49. For estimating the software error intensity of parametric models, weighted least-square (WLS) estimate is suggested for the first time.

50. The wake flow of stator vanes and the unsteady flow in the passage of rotor blades were solved by using oscillating fluid mechanics theory and parametric polynomial method.

51. Based on the application study of ANSYS in the optimization design of RC structure T beam,( ) the building method of 3D parametric entity model to RC structure T beam is given.

52. Principal Component Analysis ( PCA ) and non - parametric tests were performed to assess relationships.

53. The parametric excitation from platform heave motion and the fluid quadratic damping are considered in the mathematical model.

54. This is enough to perform non - parametric statistical tests.

55. Parametric descriptions of a plane, so we haven't really done that because you would need two parameters to parameterize a plane just because it's a two dimensional object.

56. This paper applied a non-Gaussian moment equation closure method to compute random responses of a two-degree-of-system with strongly nonlinear coupling under parametric excitation.

57. The parametric FE model of three-box type body is created.

58. Preliminary exploration and research to the operation principle, structure and implementation method of parametric loudspeaker system are described in the article.

59. Combining with the calculating method of hide based on depth method measure, the technology of modifying 2D assembly drawing based on parametric part drawing is presented.

60. Conclusion is the parametric models do some simplicity and supposition the hydrological phenomenon.

61. Chapter 4 uses barycentric subdivision method on arbitrary discrete parametric curves net.

62. Process of parametric modeling of bevel gear with standard evolute tooth on PC based CAD system is presented.

63. Furthermore a parametric design method based on feather bas been put forward.

64. The non-linear dynamic system subject to the parametric excitation has received wide attention in connection with interest in application in many fields.

65. At the second correction step, a parametric method based on piecewise polynomial phase model is exploited to eliminate the residual contamination.

66. Furthermore, it performed the parametric analysis in terms of feedback gains and delayed time using the root locus method, thus obtaining the system′s flutter stability boundary.

67. Thus, the 3 D parametric design of filament winding equipment around a research direction.

68. This method utilizes genetic algorithm to solve the problem of parametric optimization a nonlinear control system.

69. The main contents of the thesis are as follows:(1) Based on vector representation of parametric equations, a novel fast interpolation method of cubic B spline curve is presented.

70. Result and conclusion: For quality control of axenic medicine production, the method of parametric release is more effective than traditional method.

71. When a inverse function of monotone function can not show the explicit formula, the distribution density curve of continuous randon variable can be gained with a parametric equation.

72. The two-mode squeezed number states as the common eigenstates of the parametric amplifier Hamiltonian and the generalized two-mode squeeze operator are found.

73. This paper studied the robustness problem of discrete-time system with parametric perturbations and whose state and control vectors are all constrained.

74. Study and design to the parametric loudspeaker system include the contents of two respects: software and hardware.

75. A very promising optical amplifier, fiber optical parametric amplifier (OPA), is introduced and dissertated in this paper.

76. Work coordinate system is constructed by mixing matrix representation and parametric representation.

77. This paper gives the idea of designing the parametric amplifier from electro-magnetic field structure.

78. It introduced imitating surfaces with bicubic parametric curves, feed length, cutter location and vector of location.

79. In Chapter six we consider the dual problem, develop several computational procedures based on duality, and discuss sensitivity and parametric analysis.

80. Fiber-optic parametric amplifier (FOPA) is a new kind of nonlinear all-optical amplifier based on four-wave mixing.

81. Numerical example showed that the parametric equation is rational to describe the shape of mooring line.

82. This paper describes the method that the irregular curve is fitted with accumulated chord length parametric cubic spline. The fitted curve is smooth and continuous.

83. The regulating rule for parametric variable PID which is successfully applied to the computer excitative regulator is studied and analyzed by means of computer emulation.

84. This paper studied the effects of uniform magnetic field on the parametric instability of jet with pulsating basic velocity.

85. A new-type of sound propagation system, parametric loudspeaker system,(http://) is introduced.

86. Based on dual relaxation method to extend a special convex separable programming algorithm, this tracking algorithm was constructed by parametric analysis.

87. It is given a evaluation formula for a class of infinite integrals by applying Parametric Variable integral transformation.

88. This paper investigates the subharmonic parametric resonance problems of a symmetric orthotropic laminated rectangular plate with simply supported edges by the use of the singularity theory.

89. This paper deals with the linear systems with parametric faults. A control strategy based on the linear quadratic form is proposed.

90. The grid parametric division order is programmed according to APDL. The grid division of CHANG Hong SF21366 television was achieved.

91. The feasibility and correctness of the parametric design for hydropneumatic recuperator are validated by an example.

92. The formulation on the electromagnetic force results that the equations of motion includes the quadratic and cubic nonlinearities and parametric excitation.

93. The realization of parametric loudspeaker system involves the knowledge of many disciplines, including non-linear acoustics, electronic engineering, computer science and etc.

94. Traditional methods of technical efficiency measurement include parametric method and the non-parametric DEA based on radial technology distance function mainly.

95. The clipping algorithm of 2D arbitrary domain is improved to form the parametric boundary loops of the closed surfaces.

96. In this paper , the parametric wave riders designed with variable wedge angle is being studied.

97. This article using the equivalent parametric method in the steady condition presents the integrated algorithm to the symbolic analysis of nonlinear circuit system.

98. In this paper, a new kind of rational parametric transformation is studied which has the same form of it's inverse transformation.

99. Applying the parametrical modeling capabilities of I-DEAS, an automatic 3D parametric modeling system of turbogenerator stator coil was developed.

100. Based on vector expression of parametric equation, a high speed interpolation algorithm for a third-order B-spline curve in CNC systems is proposed.

101. Some new investigations are also reviewed of the use of this technique in such fields of electroanalysis as electrochemical parametric estimation, selective el...

102. The simulation results demonstrate this method is valid in parametric optimization of a nonlinear control system.

103. The principal resonance and stability of second-order stochastic system to random parametric excitation were investigated.

104. This paper presents an approach to parametric fault diagnosis of power electronic circuits.

105. Parametric manikin based on this digital human model is created, which can meet the demands of different percentage.

106. By the solution of the model, a calculating formula of the local dihedral angel of intersecting line and a parametric equation of contacting line are given.

107. Parametric vibration of an axially moving, elastic, tensioned beam with pulsating speed was investigated in the vicinity of subharmonic and combination resonance.

108. In this pater, using parametric transform method direct derive soliton wave equation of loss optical fibers and elementary soliton solution.

109. Methods: Many non - parametric statistic indexes were calculated in order to show a row - column dependence.

110. Based on geometry and convex set methods, this paper gives systemically the definitions of global and local convexity for planar closed parametric curve, and proves the two definitions are equivalent.

111. This paper describes the method that the irregular curve is fitted with accumulated chord length parametric cubic spline.

112. It proves that the analytical equation is equivalent to the parametric equation under certain condition.

113. In the analysis, APDL language was applied to build a parametric model of one fourth tubesheet including channel,(Sentencedict) cylinder and 2433 tubes.

114. The result displays that the horizontal steady-state vibration is little affected by vertical Chulomb damping parametric excitations.

115. The authors have derived a parametric equation of the contour curve by the graphic method and through the analysis of its nature on the orthographic axonometric projection of a torus.

116. As soon as the parametric representation of the sculptured surface is known, the NC machining path on it is determined for the nonspherical cutters.

117. In the parametric amplification process, the pump light comes from the incident laser and the seed light from the generated supercontinuum by filamentation.

118. Firstly, the model of rigid basic pile is studied in this paper, and the nonlinear bifurcation characteristics of this kind of model with parametric excitation are explored in detail.

119. The all optical AND logical operation using the wavelength conversion in the fiber optical parametric amplifier (FOPA) is completed.

120. The gain bandwidth of optical parametric chirped pulse amplification pumped by divergent beams has been theoretically studied.

121.

122.

123.

124.

125.

126.

127.

128.

129.

130.

131.

132.

133.

134.

135.

136.

137.

138.

139.

140.

141.

142.

143.

144.

145.

146.

147.

148.

149.

150.

151.

152.

153.

154.

155.

156.

157.

158.

159.

160.

161.

162.

163.

164.

165.

166.

167.

168.

169.

170.

171.

172.

173.

174.

175.

176.

177.

178.

179.

180.

181.

182.

183.

184.

185.

186.

187.

188.

189.

190.

191.

192.

193.