1. Sintering usually leads to a reduction in mass with pores becoming more spherical or being eliminated.

2. The rate at which solid state sintering occurs is approximately inversely proportional to the particle size involved.

3. In the production process of puddling, sinter is multiphase.

4. Fluorite can improve low temperature breakdown property of sinter.

5. Tiejingfen, Mission ball sinter, processing, distribution steel.

6. Hydrothermal reaction and sinter condition was discussed.

7. To provide a ferrite sinter for an antenna suitable for use in a high frequency band and a broad band and to provide a magnetic material antenna.

8. The practices of improving sinter quality conducted by enunciated in this paper.

9. The character of sinter metal porous materials was studied, the metal filter element market of china and some new developments of sinter metal technology was introduced.

10. Sinter basicity is an important parameter for sintering and ironmaking production.

11. Stemming is not advisable because it can sinter and complicate later charging.

11. try its best to gather and make good sentences.

12. The techniques of sinter charging to BF by size grading, and BF return fines screening were the first time employed in our country by ANGANG.

13. However, AlN is hard to sinter, which constrains its application.

14. Sinter type fastigiate-handle drills:Use for drilling hard and brickle material, such as glass, ceramics etc.

15. Attempt to sinter ultrafine Pure WC by spark plasma sintering was made.

16. Based on the analysed results of columned sinter filling model, the calculational methods of minimum size and recommended size of columned sweat-sinter have been given.

17. The variation rule of the vertical sintering speed with proceeding of sinter was investigated by studying the air speed.

18. The sintering practice with proportioning of Brazil high grade concentrates in Shougang sintering plant for the purpose to increase sinter grade and decrease BF slag ratio was presented in this paper.

19. This article introduces the development of sinter refining minerals in Anyang in recent years(), and technical measurement of improving sinter quality has been adopted.

20. The first program solved in low SiO 2 sinter is sintering strength.

21. Calcium silicate slag is the residue from sinter of fly ash with lime stone after alumina extracted by solution of sodium carbonate.

22. Introduced the research and results of low temperature sinter horniness crockery.

23. The grains then soften at their points of con-tact and fuse together, a process called sintering.

24. It is shown that the high temperature cooling zone plays an important role in formation of calcium ferrite and high-basicity sinter.

25. Studied the copper powder in different pressure semi-finished product to finally affect the sinter property and density and its mechanism.

26. Material is cementsandcoal dust high pressure molding need not sinter. The product with good strength colourful.

27. This paper introduces the development and the optimum direction of technique on raw materials mixing of sinter and burden distribution in BF at LISC, with the large-scale of sintering machine and BF .

28. Veining defects have been effectively prevented and eliminated by improvement on gating system, especially by special additive to core sand and sinter coating on surface of sand core.

29. Filter medium adopts kinds of materials, such as inorganic fiber, cellulose fiber, resin-impregnated paper, stainless steel sinter fiber web, stainless steel wire mesh.

30. Introduces a single - Chip micrcomputer automatic control system of molybdenum bar vertical sinter.

31. The domestic ores are fine magnetite concentrate, the imported ores mainly are hematite sinter fines.

32. It is shown that boronic iron concentrate is quite a good boronic additives to the sinter.

33. Using knowledge base that was based on database technology and illation with forward inference, an expert system was designed for controlling sinter chemistry.

34. The laboratory test result shows that, under the conditions of Tangshang Steel Plate Co. , Ltd. , the proportioning rate of sea sand in sinter mix must be restricted below 20%.

35. Higher sinter temperature is in favor of the electrical conductivity go against Seebeck coefficient top - type materials.

36. Tiejingfen, sinter ball production sales, steel, metal Dianliao, mines machinery accessories sales.

37. Sinter type straight-handle drills:Use for drilling hard and brickle material, such as glass, ceramics, jewellery etc.

38. The laboratory test of Hainan iron ore as bedding material was conducted in the sinter pot.

39. However, as a covalent chemical compound with the wurtzite crystal structure, A1N is not easy to sinter.

40. Sinter straight - handle drills: Use for drilling hard and brickle material, such as glass, ceramics, jewellery etc.

41. It is often used as the mold , metal plating. utensil, as well sa the mold to sinter diamond tools and aiguilles.

41. is a online sentence dictionary, on which you can find excellent sentences for a large number of words.

42. In an industrial sinter chain, the drive type of the spider and pallet cars is gear and pin rack transmission.

43. For sinter with 25% and 50% MAC fines the iron oxides mainly consisted of hematite and magnetite, the bonding phase were mainly dicalcium silicate, glassiness , and a few amount of calcium ferrite.

44. In the different stage, the Mo-Cu sinter flan behaved different densified mechanism.

45. The influence of organic strengthener addition was studied on the granulation of sinter mixture at Pangang.

46. Test study of low SiO 2 sinter is introduced under material condition in Anyang.

47. A pin rack driven device for sinter circulate cooler was presented in this paper.

48. As to high basicity sinter, the influence of the reduction disappearance of calcium ferrite and hematite on sinter strength is twice higher than the phase transition of calcium orthosilicate.

49. This lime hydrated material could be used in sinter production.

50. Sinter type fastigiate - handle drills: Use for drilling and brickle material such as glass, ceramics etc.

51. From all aspects of view, the air permeability of the material bed was better and the carbon distribution became reasonable and sinter ore was even during sintering.

52. The sinter can be directly used in smelting iron bearing chromium.

53. We increase the grade of sinter and decrease the energy consuming of sinter by the technologies of low temperature agglomerating, spherule agglomerating and intelligence heaping, etc.

54. By controlling FeO and quicklime content, and improving the permeability and oxidation atmosphere of the sinter bed, the sinters with calcium ferrite as main binding phase can be produced.

55. In addition, solids are apt to settle and sinter and stick on the flat bottom surface.

56. The study result shows that proportioning of burnt lime in sinter mix is a effective measure for sinter production increasing, and the sinter quality and metallurgical properties were less affected.

57. Formation mechanism of the low strength area for sinter with fixed basicity is described.

58. The moisture control for sinter mixture is always a difficulty in iron and steel industry.

59. Low power rate on the surface of heating tube. Medium does not scale, congeal, sinter or carbonize on the surface, and so is ideal heating element for viscous, and heat sensitive liquid medium.

60. During the capital repair of the No. 1 sintering machine, stocking sinter was used as BF burden of 41% at Meishan Steel.

61. The background of the tryout of the sinter synergistic agent is introduced.

62. In addition, the enterprise offers Sinter, Gases, Catalysts and Catalysts.

63. The grade of sinter is not reduced because of H 3BO 3 addition , The addition process is simple.

64. The mechanism of decreasing sinter degradation index by spraying halide at its surface is introduced.

65. In Germany, he was called Sankt Nikolaus and in Holland, Sinter Klaas.

66. With this technique to replace the feed roller deflector, the sinter output can increase about 5%, and the fuel consumption can decrease obviously.

67. The influence of organic strengthener addition was studied on the granulation of sinter feed mixture at Pangang.

68. The paper introduce the moulding and sinter technology of a new kind of tyrannous cathode.