1. Procedure of manually combing large size unit's Feed water Pump is complex and easy to cause much change of drum level.

2. The feed water pump of boiler is one of important equipment of boiler unit. The invalidation of it will bring large economic loss.

3. These characteristic curves offer the bases of the feed water pump performance estimation and the whole unit economical analysis.

4. Recommendation for the configuration of feed water pump in air cooling units is given based on the design condition of the project and comparison between steam pump and electric pump economically.

5. Process in feed water pump is an auxiliary cycle of pure energy exchange between turbine energy and the energy level where feed water pump located.

6. The boiler feed water pump turbine (BFPT) is one of the main products of Hangzhou Steam Turbine Co.

7. The quantitative calculation and analysis of the thermal economy for the steam feed water pump system were performed using the theory of equivalent heat drop.

8. Based on the analyses of warming pump function and its working pattern, a modification to the warming device of feed water pump was proposed for water saving.

9. The qualitative analysis to 1000MW air cooling unit is also carried out for owners reference in determining the configuration mode of feed water pump.

10. Vibration signal and its characteristic information in the course of running of feed water pump are significant for the state monitoring of the feed water pump system.

11. This paper presents the vibration analysis and treatment of No. 2 bearing of the steam turbine for Unit 3 turbine driven feed water pump A in Zhanjiang Power Plant.

12. Several economical startup ways for 300MW units, such as, using the booster pumps and steam feed water pump to feed boiler water and igniting furnace by using small flow oil guns, were introduced.

12. try its best to collect and create good sentences.

13. This artical introduce the construct, principle and other main functions of the boiler feed water pump turbine control system.

14. This paper briefly introduces the sealing principle of the screw sealing feed water pump, and deals with its frequent trip problem arising from inadequate pressure difference of seal water.

15. A qualitative fault diagnosis method based on bond graph for feed water pump was proposed.

16. The auxiliary coolers will include the turbine lube oil coolers, the generator air coolers, the boiler feed water pump bearing cooler, and the bed ash cooling screws.

17. The First Making up is an important part of the heavy repair of stage feed water pump while decreasing wobble value of rotor is the aim of it.

18. The boiler MFT (master fuel trip) protection was actuated during start up of feed water pump A of Unit 1 and 2 in Huaneng Shantou Power Plant.