1. Diagnoses are based on evidence accumulated about failure modes, operator observations of symptoms and historical records.

2. Failure mode open, closed, as is?

3. Keywords: fractography, brittle material, failure mode, model rock.

4. The main device failure mode is secondary breakdown.

5. Process failure mode and effect analysis!

6. Corrosion is the primary failure mode of pressurized pipelines.

7. The main failure mode of the automobilecylinder is wear.

8. Generally, only the plastic failure mode is considered in system reliability analysis of structures.

9. Failure mode effect analysis (FMEA) can be used to rank these variables based on "probability, severity and detectability", with experimentation then being used to develop a control strategy.

10. The failure mode in the alloy is a mixedintergranular and transgranular fracture.

11. Shear failure is a basic failure mode of borehole rock.

12. Its failure mode is different from plane K-joint and the linkage branch pipe could restrict main pipe effectively and affect the distribution and development of stress in the main pipe.

13. A failure mode of pyriform hole and the concepts of slip and spring back were forward.

14. The punching failure may be the major failure mode of the slabs under the action of wheel load and it is hence proposed that the related successive studies should be made.

15. The final failure mode of the model is tension failure of perimeter columns and bottom of core wall on the tension side caused by overturning moment,[/failure mode.html] and the story shear failure mode was not found.

16. The major failure mode of the slope is the local rock block lossing stability, and after taking suitable strengthening countermeasures, the slope stability can be reached.

17. Three-parameter Weibull distribution is performed to simulate product failure mode and Weibull probability paper is used to define the shape, scale and location parameter for each production lot.

18. Vital to such decisions is a clear understanding of system functions, failure modes and the consequences of failure.

19. The concept, mechanism and judgment method of several main solid state relay failure mode are described.

20. The simplified formula of ultimate tension load is obtained in view of mix plastic-cone tension failure mode of the M10 plastic embedded part.

21. Based on the enumeration of the cut sets for the load point interruption, load transition character, maintenance of devices, active failure mode and overload of transmission line are all discussed.

22. Structure at work was affected by vibration and impact loads inescapability . So, dynamic damage and destroy is the primary failure mode of structure.

23. Adopting algorithm of random event' conditional probability and introducing condition association coefficient of failure mode can reflect failure dependence of structure.

24. It analysis the causes of common fault and takes corrective action and preventive action. to the end that is avoides form the process failure mode in this paper.

25. Based on the formulas of oblique section bearing capacity and normal section bearing capacity, the paper set rules to determine the failure mode of the wall and gave several main factors.

26. Hollow cathode is a key assemble of ion engine. So it is import ant to study its failure mode for improve the reliability of ion thruster.

27. The ultimate bending capacity of CFRST joints can be considered as branch tube flange effective width failure mode.

28. Namely, when the damping is small, the influence will be great. The results also show the buckling failure is the primary failure mode.

29. Weld access hole geometry and size have significant effect on ductility and failure mode of the connection.

30. Crack width load - displacement . ultimate load and failure mode were measured and observed.

31. The primary failure mode of commomly used circuit protective devices is short-circuit, and so is TVS (Transient Voltage Suppressor) .

32. In the present work, a rarely observed failure mode of dual-shell U-tube heat exchanger was studied, and the preliminary reason of the failure was discussed.

33. The failure mode includes positive grid corrosion, sulfation , runaway, negative strap corrosion and short circuit etc.

34. Succinct has proved the two - broken line modified failure mode is effective and feasible.

35. DFMEA process can't ensure all the failure mode was covered.

36. It is determined that main failure mode for failed products is bad contact through failure analysis on products, failed during life test.

37. Ye Tan: Wong Kwong Yu declared the failure of financial failure mode?

38. This paper proposes a vector algorithm based on the famous failure mode and effect analysis as an approach to reliability evaluation of a complex distribution system.

39. Claim statistical data indicated that truck clutch release bearing had high failure rate, the failure mode including abnormal noise, ablation, oil starvation and wear of bearing block shoulder, etc.

40. This failure mode would have been extremely difficult to detect with any other diagnostic technique.

41. Are process capability studies including Failure Mode Effects Analysis ( FMEA's ) conducted where applicable?

42. Causality diagram methodology is a probabilistic reasoning, which can be applied to fault analysis. However(), it lacks analysis on the importance of failure mode.

43. At least 3 years of product design experience such as Good Drawing Office practices, Tolerance Analysis, Design For Assembly, Failure Mode and Effect Analysis (FMEA).

44. The main failure mode of the automobile engine cylinder is wear.

45. Local buckling is the dominant failure mode for composite steel column.

46. Fastener common failure mode of failure of the assembly has elongated,[http:///failure mode.html] fatigue fracture and delayed fracture.

47. Developing and auditing Design Failure Mode and Effect Analysis ( DFMEA ).

48. Performance of cold mill work rolls is dependent to a great extent on spalling resistance, so that both of roll manufacturers and users show great interest in this failure mode.

49. The reliability index was applied on basis of the analysis on the failure mode. And according to the sampling theory of reliability a reliability test method was put forward.

50. The RPN value from the reliability analysis of the major failure mode provides an important basic reference for the future use and maintenance.

51. Apply the FMEA method to analyze failure mode effect of a fuel cell bus power train.