1. A water turbine drives the generator.

2. Hot water is converted to electricity by a turbine.

3. Then the steam passes into the turbine.

4. Damage to the turbine slowed the work down.

5. Algae has clogged the intake to the water turbine.

6. A tidal current turbine is similar in principle to a windmill.

7. The gas turbine also keeps the batteries topped up.

8. The constant whine of the turbine and the rush of wind were my only company.

9. After a piston engine, starting a turbine can seem strange.

10. Both turbine options were in close formation in the static at Farnborough and a superficial look would show little between them.

11. It revs like a turbine and sounds like a locomotive. it turns the skin on your arms to gooseflesh.

12. The turbine whined familiarly and the rotors blurred above the cabin.

13. A jet turbine engine may run for 40, 000 hours before being rebuilt.

14. The work consisted of throwing up embankments and installing water turbine pumps.

15. The seasonal performance might be improved to some extent by using a wind turbine as the energy source.

16. Earlier in my visit I had spotted some castings on his scrap heap which I was fairly sure belonged to a turbine.

17. Subcontractor, Woodward Governor, also provided an interesting display with the Netcon 500 gas turbine monitoring and control system.

18. Reacher had made certain fine, illegal adjustments of the turbine.

19. The electricity can then be regenerated by allowing the air to expand in a turbine.

20. Wind farms also take up huge tracts of land and can kill birds caught in turbine blades.

21. At operating speed there was no roaring, vibrating, or shaking, just a smooth whine from the turbine.

22. The toilets are lit with electricity from a wind turbine.

23. The batteries are charged on-board by a small gas turbine auxiliary propulsion unit.

24. One of its most significant features is the choice of a gas turbine rather than internal combustion engine.

25. A major project is under way to reintroduce the waterwheel and turbine in order to harness this great natural resource once again.

26. The organisation hopes to power the village via a wind turbine.

26. try its best to gather and create good sentences.

27. The liquid is turned into a vapour and the pressure of the expanding vapour turns a turbine to produce the electricity.

28. Cobalt is important in the jet engines of aeroplanes because it makes turbine blades resist high temperatures.

29. The next stage of our enterprise was to convert the little stable at the end of the cottage into a turbine house.

30. The facility also has a test bed for Ruston and Solar turbine engines.

1. A water turbine drives the generator.

2. Hot water is converted to electricity by a turbine.

3. The work consisted of throwing up embankments and installing water turbine pumps.

31. The turbine is sealed off behind a tasteful stained wood casing with leaded windows lit from behind.

32. The starter whined, the rotors moved slowly, then the turbine caught.

33. In earlier times this had an overshot wheel, later replaced with a turbine.

34. That was the genesis of an idea that returned to him years later when he invented a smooth disc turbine without buckets.

35. Surely a manufacturer could develop a wind generator which has a cage enclosing the turbine?

36. In a steam turbine, the steam pushes against blades.

37. A wind turbine furnished auxillary power to the station.

38. It is for telemetering the vibration frequency, dynamic stress and temperature of turbine blades under dynamic state.

39. Namely multi-permanent magnetism synchronization generation couples with wind turbine directly, and introduces solid-state relay (SSR) cut-in control undisturbed and invert to grid.

40. With the fast development of the construction in pithead power plant, the large air cooling steam turbine has been widely used in China.

41. The experiment has studied the heat transfer characteristic inside U shaped variable cross-section channels with different rib pitches, The channel is the middle part of a gas turbine blade.

42. The characteristics of turbulent flow in a high pressure turbine cascade were investigated experimentally.

43. The working principle of a bootstrap air cycle refrigeration components is described in detail, such as compressor, turbine, shaft and internal heat exchanger.

44. The paper introduces assembling and machining features and quality control in housing and covers of impulse turbine for Jililong power station.

45. The over- limit and visual cracks occurred in an aero -engine high pressure turbine blade tip were repaired using laser welding.

46. Because turbine based combined cycle has mature turbine technology, being contrasted with other types of combined cycle engines it has more attraction for hypersonic speed prolusion system.

47. The desire for further increases in cycle conditions and consequent increases in the cycle efficiency, led to the addition of steam reheat during turbine expansion.

48. Capstone Turbine Corporation of California is placing their micro turbine engines inside buses and cars.

49. As an important parameter of steam turbine governing system, the dead band property was generally taken from the static characteristic curve.

50. And then wind speed, wind generators and wind farm are modeled. Wind generator model includes wind turbine model, transferring structure model and asynchronous generator model.

51. Now, in addition to the rocket belt, there are experiments with a turbine belt.

52. The no machining directional solidification hollow turbine blades, hollow guide vans and complex structure parts used in aero engine and gas turbine made by vacuum precision investment casting.

53. The paper introduces the helium turbine which used in helium refrigerator of space environment simulator, including its design, setting-to-work test and its characteristics.

54. The turbine ring gate of Guangzhao Hydropower Station was first ring gate which was designed and manufactured by Harbin Electric Machinery Company Limited.

55. Disposal of salt scaling in a back-pressure steam turbine by supersaturated steam method is described with respects to the procedure and points for attention.

56. Isolated desuperheater for turbine extraction of large steam turbines is a new technique to improve the thermal economy of the heat cycle.

56. try its best to collect and build good sentences.

57. The study on flow field in front and at back of a Francis turbine runner is very important for the runner in its hydraulic design and characteristic improvement.

58. A huge amount of atomized mixture of water and fire-extinguishing agent was spurted to the fire area in high, utilizing speed the high-velocity wake airflow generated by the aviation turbine engine.

59. The economic feasibility of application of hydraulic turbine in a 1.

60. This paper deals with the inverse design problem of transonic turbine cascade in the hodograph plane by the finite area method.

61. Combined with methanol's indirect use in power system, methanol and dimethyl-ether steam reforming use gas turbine exhaust gas to constitute the chemically recuperative gas turbine cycle.

62. This paper presents a method for creep life calculation of steam turbine parts.

63. A hydraulic turbine is the device which turns kinetic energy of water into circumrotation power energy, and makes dynamotor working, then transfer energy to other place.

64. This paper introduces a magnet - absorbing wall - climbing robot for efficiently maintaining turbine blades on site. The robot uses creep feed grinding to machine weld lines.

65. Presently, there are three familiar air supply apparatuses : air compressor, turbine pump and nutritional servo valve.

66. Who can tell me the principle of vacuum injector in the turbine?

67. However, a major advantage of superheating steam is that for increasing cycle temperature and pressure, the exhaust wetness in the turbine can be maintained within the physical limits.

68. The divided-flow two-level turbine engine with two pumps is composed of a turbine, a turbine shaft, a two-level booster pump wheel, a guide pulley and the expansion chamber shell.

69. To decrease the leakage of full closed wicket gate of reaction turbine is an important subject of improving the constructional characteristic of water turbine.

70. The control systems for wind turbine generators are compared and analyzed.

71. The results show that , the ratio of the output power of vaneless counter-rotating turbine can reduce 2.6% at the same turbine efficiency when the low pressure rotor curves positive.

72. Inner flow in Francis turbine is simulated by using DES model and a large amount of data at test points is exported. The result agrees well with the experiment.

73. Removing all the petroleum hydrocarbons, which includes turbine lube oil, air compressor lubricant and other compounds, is very difficult.

74. The paper introduces the structure and characteristic of soft cut-in wind turbine control system using a dual speed asynchronous generator.

75. The shaft of the turbine is coupled to the rotor of the generator.

76. Main equipment including: boiler, steam turbine, generator complete and their auxiliary equipments.

77. With the development of waterpower resources, the dimension of runner blade of Kaplan turbine is getting larger and larger.

78. This paper introduces an effective method suitable for wind farm central control which uses PLC as the wind turbine generators main control unit.

79. Self-sustained oscillation will appear in gas turbine combustor when unstable combustion couples with acoustic.

80. In this paper, the basic principle model theory of the impulse turbine is established.

81. Vacuum condenser is applicable to condensing exhaust steam from steam turbine.

82. Another ski area in the Northeast, the Jiminy Peak Mountain Resort in Massachusetts, has built a wind turbine to produce energy.

83. Because of particle size in high pressure fire-resistant oil of by-pass control system for stem turbine no. 3 Zhanjiang Power Polant exceeding standard, the by-pass valve can's be actuated.

84. Horizontal - axis turbines are the most common wind turbine design.

85. The transformation for No. 4 turbine in the Danjiangkou Hydropower Station also includes modification of fixed guide vane besides turbine.

86. The recuperator is one of the main components of the micro turbine in energy island system.

87. The film-cooling technique have already got usage of the long-term in the air gas turbine.

88. The computation results of rotor winding ventilation of a 125 MW air-cooled turbine generator with sub - slot had been provided.

89. Modem gas turbine rotors are usually formed as rod fastening rotor[/turbine.html], in which disks are tied together by one central tie rod or several tie rods distributed in the circumference.

90. In passing through the turbine in the modern regenerative cycle, some of the steam is bled from the turbine at a series of three or four openings (more or less), for use in feedwater heaters.

91. The S character of pump turbine was introduced and its formation cause was theoretically analyzed.

92. Sean Riley puts on his hazmat suit and heads into the radiation zone for his next tough fix, replacing a steam turbine in a nuclear power plant to boost its energy-producing capacity.

93. Horizontal axis turbine and vertical axis turbine ( VAWT ) are two basic forms of wind turbine.

94. This steam is used to turn turbine blades of electric generators.

95. Introduces a new fluid drive transmission system of the alter velocity wind turbine.

96. The designing methods of the control parameters were presented. The relationship between the similarity principle and Pelton turbine was demonstrated.

97. Boiler - turbine coordinated control system ( CCS ) of fossil - fired unit is a difficult problem in thermal control.

98. Such a cycle enjoys a significant enhancement in specific power, thermal efficiency and exergy efficiency as compared with a simple cycle gas turbine.

99. The numerical calculation method is adopted to study the energy characteristics of axial-flow turbine.

100. The stress status in the reagin of fitting runner blade trunnion with runner hub for kaplan turbine have special attention in hub design.

101. The engineering principle is no different — the steady currents found in coastal of water like Canada's Bay of Fundy turn the rotors of an underwater turbine.

102. A circulating two-level turbine engine with two pumps is composed of a turbine, a turbine shaft, a two-level booster pump wheel, a guide pulley and the expansion chamber shell.

103. To work under low-speed, heavy-load, swing, intermittent motion, mud and water, the hydraulic turbine using solid lubricant embedded bearing is superior to that using liquid lubricant.

104. The structural characteristic and machining method of runner blade servomotor piston ring for large Kaplan turbine are studied.

105. The high speed airfoil type wind turbine has the highest efficiency in high wind speeds.

106. A approximate formula is obtained by introducing the concept of equivalent modulus of elasticity on condition that the rotational speed of turbine is not very high.

107. If bats fly within a meter or so of a spinning turbine, they get caught in the depressurized zone and experience barotrauma .

108. The production of turbine blades mainly uses forging billets in small-scale production, so the forging die design requires much higher production.

109. The torque tube unbalance of turboshaft power turbine rotor is investigated and a test method for estimating the unbalance is introduced with high speed dynamic balance test.

110. The additive components in VESTA Turbine Oils also afford exceptional rust and corrosion protection.

111. To increase the head of bulb turbine, it is necessary to improve the runner blade design method and design high head bulb turbine with good energy and cavitation coefficient performance high.

112. In this paper the stiffness and strength of the runner blades for a Kaplan turbine are calculated with finite element method using ANSYS sofware.

113. The ideal cycle heat efficiency used nowadays is affected by the relative internal efficiency so it can't reflect the operation economic state of thermal system of steam turbine.

114. The technique proved effective when it was used in rapid crack testing and crack depth measuring of steam turbine metal parts such as joint face of hig.

115. The cooling system of reverse bootstrap air cycle driven by powered turbine can be used for cooling the avionics pods.

116. The slowly rotating turbine gathers the energy from the powerful surges of water pushed through the channel between the Orkney Islands and the north coast of Scotland with every turn of the tide./turbine.html

117. The hydraulic turbine efficiency test is important for the hydroelectric station or pump station to operate economically.

118. The variation of circulating water flow directly affects the vacuum of condenser efficiency of steam turbine.

119. AIR CYCLE MACHINE, A compressor and turbine on a common shaft for cooling the air in an air conditioning system.

120. MPT Series magnetically driven, sealless regenerative turbine vane pumps are designed specifically for small flows at high heads.

121. An expert system for steam turbine cold-state start-up at Baicheng Power Plant has been designed through the use of expert system development tool.

122. In the variable conditions calculation of thermodynamic calculation for marine steam turbine, it is often for overcritical conditions and overflow conditions to occur.

123. Wind farm operators--China Huaneng Group and China Datang Corp, 's renewable power unit--may have better prospects given superior earnings visibility over turbine assemblers.

124. The first wave turbine began operating in 1965, for an illuminated buoy in Osaka Bay.

125. The Francis turbine runner is an important running part of under water.

126. Presented a data acquisition card for hydraulic turbine cavitation noise testing.

127. Adopting the definition of indicated relative internal efficiency, the concept of equivalent condition curve was proposed and corresponding turbine heat rate model was derived.

128. Firstly, two defining methods of relative internal efficiency for steam turbine are analyzed from energy equilibrium.

129. This tiny 8" tall light-up wind turbine has been used by leading design team Jason Bruges Studio in a number of high profile installations."

130. Warm compaction technology have been successfully employed to automotive parts including turbine hub, connecting rod, gears, whole coil and electronic igniter, and so on.

131. In this paper, the technology of NC machining of Francis turbine blade is presented.

132. In chapter 1, the existed problem and current research on vibration of hydropower house with large-sized Francis turbine generator unit are introduced.

133. The technology of digital control represents a development trend of gas turbine control, and a digital electronic controller is the core unit in a gas turbine control system.

134. The forming technology of skin-cooling high pressure turbine was analyzed, introduced polyurethane bulging die structure design and the working process and die debugging improvement.

135. Steam turbine casing collision test is used to determine the minimum through-flow clearance between rotor and assembled casing parts.

136. According to the operating procedure of a combined cooling heating and power (CCHP) system with micro gas turbine as driver, establishes the thermodynamic model.

137. An analysis is made on the blading fracture in LP rotor of a GEC 362.5 MW turbine, and the remedial measure and its result are described.

138. The molten carbonate fuel cell ( MCFC ) - gas turbine hybrid system was analyzed.

139. T_type spiral casing was applied in lots of Kaplan turbine. It is impossible to make very good flow pattern in inlet of stay vane only by means of changing geometry of spiral casing.

140. The output signal of the turbine host controls was delivered to DEH for adjusting valve position.

141. An internal-combustion engine consisting essentially of an air compressor, a combustion chamber, and a turbine wheel that is turned by the expanding products of combustion.

142. Currently monitoring device for stream turbine can't meet the requirement, design of new intelligent real-time monitoring system is very impendency and important.

143. A stress analysis of a Powder Metallurgy (PM) turbine disc was accomplished by finite element method.

144. It is not very effective to monitor friction between rotor and stationary of a steam turbine by vibration signal indirectly in power station because of the restriction of vibrometer and heavy rotor.

145. Bearing rating standards. Life calculations for wind turbine gearboxes using the latest standards.

146. The paper describes the development idea and process of EH oil regeneration device for large turbine unit, analyzes its practical, economical and social value.

146. is a sentence dictionary, on which you can find excellent sentences for a large number of words.

147. Load dump anticipation(LDA) function are one of the important steps to ensure the success of the steam turbine load dump test, and this circumstance is vary rare.

148. Therefore, the study for internal flow characteristics of Kaplan turbine has important theoretical and practical significance.

149. Taking a 6MW back-pressure turbine as an example, this paper gives a description of a fault recognition diagnosis for steam turbines.

150. The modular high temperature gas-cooled reactor (HTGR) incorporated with helium turbine is considered as one of the leading candidates for future nuclear power plants.

151. The Auburn students came up with much the same strategy in their design, opting for a type of gas turbine called a turboshaft to get the best performance.

152. Wind turbine structure dynamics is researched on the base of the transient analysis.

153. Experience gained from these turbines are useful for the future large high-head Francis turbine design.

154. An engineering example of marine gas turbine rotor is applied to the verification of the provided model.

155. Narrated the application of gas - turbine drive water injection pump.

156. An example of rabbet-feature manufacturability of a turbine blade was given to show the method available.

157. The accounting model and matrix model of thermoeconomics are implemented to study the micro gas turbine with heat recuperator .

158. The auxiliary coolers will include the turbine lube oil coolers, the generator air coolers, the boiler feed water pump bearing cooler, and the bed ash cooling screws.

159. Selection methods of back pressure turbine according to after-heat are introduced. An example is given to show economic advantages of differential pressure power generation using heating steam.

160. Worm turbine condensate pump failure in the process of resolving this question must have reference.

161. The thermal stress evolution during the solidification process of a Francis turbine band casting had been simulated by the FDM/FEM integrated system.

162. Methods: 524 cases of impacted mandibular third molars were extracted with air turbine handpiece or chisel, in which 131 cases happened complications during operation or post-operation.

163. The double shear creep specimens and modeling turbine blades have been experimented for the validation of the model.

164. Realize localization of IGCC generator unit and heavy gas turbine.

165. Attributing to the large flow rate, high efficiency level reaction turbine is adoptive in staged combustion cycle liquid rocket engine.

166. DEH is the model form of modern steam turbine control system.

167. Gas turbine power steam power and system net power all decline as atmosphere temperature increasing.

168. The Filter Coalescer skid consists of two vertically mounted separator vessels, each capable of cleaning 100% of the turbine fuel gas demand.

169. BELAC was organized to provide a high quality, readily available, low-cost alternative to Original Equipment Manufacturer (OEM) turbine blades produced by engine manufacturers.

170. The mathematical model of wind turbine applied in the calculation takes account of characteristics of the blades, hub, gearbox, shaft and asynchronous generator.

171. I have decided to document the building of my own wind turbine, or wind generator, as it is also named.

172. Mister Li is skilled at maintaining the gas turbine engine.

173. GCube donated the turbine to Laramie County Community College in Wyoming.

174. In this paper, moving least square(MLS)approximation is applied to simulate the complete characteristic curves of reversible pump turbine based on the surface fitting.

175. It is reported, bosomy group is in short for Shaanxi Province to consider to develop lubricant of appropriative of machinery of a kind of turbine jointly with company of an United States.

176. With the model of steam - injected gas turbine, the closed - loop simulation research is done.

176. Wish you can benefit from our online sentence dictionary and make progress every day!

177. This paper applies BP neural networks to the fault diagnosis of turbine supercharging system of diesel engine.

178. Under the cut-in wind speed, the computer controls soft-cut-in network while the main contactor is delayed in action, then the wind turbine is getting into normal performance as generator.

179. The overall level of operational reliability of conventional thermal units (excluding gas turbine units) in 2000 was higher than1999, the equivalent availability of thermal units was 90.30%.

180. The unsteady flow in a draft tube of Francis turbine under the off-design operation is produced by the dynamic behavior of a helical vortex rope with the dead core.

181. Based on the theoretical and experimental results, the further analysis was made to ascertain the total losses and constitution of losses in a pump turbine vo...

182. The phenomenon and cause of the secondary flow in plane turbine cascades are discussed and a mathematical prediction model of losses is presented.

183. The one-level turbine engine with one pump is composed of a turbine, a turbine shaft, a booster pump wheel and an expansion chamber shell.

184. A hydraulic turbine leaf of transmit water current relay machine displacement transmission device is designed based on the principles of capacitance sensor.

185. It can be used properly by adding a new designed regenerator in an existing simple cycle gas turbine to make this gas turbine system reach an optimal performance.

186. The Michell turbine is very amenable to power control by means of narrowing the feed-nozzle width and for fine control by means of a throttle plate in the throat of the feed-nozzle.

187. Thirdly, based on the dynamic grid method, the steady and unsteady simulation for the single cycle Kaplan turbine was conducted to study combined optimization.

188. The NC machining of hydraulic turbine blades is discussed with emphasis on blank margin control, marking inspection of blades, setting-up of blades, and machining and trimming of blades.

189. It provided a feasible and effective method for structural modification of large - scale wind turbine.

190. The stability of jet is a very important factor that affects efficiency and output as well as the vibration of impulse turbine.

191. The measuring system with microcomputer for inlet and outlet flow field of the Francis turbine runner is described. The pitot probe with 5 holes was used as sensing element.

192. The mechanical properties of fine grain cast and conventional cast integral turbine wheel were evaluated.

193. The fast cooling technology of steam turbine is the process that the cooling medium is used to accelerate the temperature reduction of cylinder and rotor after the shutdown of turbogenerator.

194. The vibration standard system puts into the use may enhance vibrates the sensor the examination, the test precision and the turbine wheel electric power facility reliability.

195. This paper gives some experiences and views the author has gained in the manufacture of marine gas turbine split casings.

196. The hydraulic fluid temperature has an effect on the meterage precision of the turbine flux transmitter.

197. And the cost of installing a small turbine is high-up to $22,000.

198. Finally, availability factor is classified into un-rated availability factor and rated availability factor, which can clearly express the detailed information of wind turbine operation.

199. The optimal performance of a real plant is obtained in terms of the internal efficiency of the compressor and that of the turbine. which represent the internal irreversibility of the plant.

200. The controller provides an adaptive estimate of the turbine shaft torque as a torque reference for a field oriented squirrel cage induction machine.

201. In order to fit in with the structural features of the radial-flow turbine, some improvements have been made in treatments as well as the computer program.

202. The author proposed a method for calculating the critical inlet plane angle of a transonic turbine blade cascade.

203. The top-level design of micro turbine Jet - engine is presented in the paper.

204. On this particular turbocharger turbine wheel I used the inner races of two ball bearings to prevent the shaft from moving axially.

205. An air blowing experiment is done on a cascade of a pulse trans-sonic plane turbine cascade tunnel.

206. The paper discusses some problems on small steam turbine generator unit for low vacuum heating.

207. Platform friction damper is an effective measure to reduce the blade vibration in gas turbine.

208. In practice,[ ] the turbine disc and the nozzles are fitted into a casing.

209. The inner flow of turbine is 3D viscid, incompressible and unsteady turbulent flow.

210. The broken reasons of bailer of impeller was found out by analyzing some relevant cases occurred in a jet-type impulse turbine in China, some measures to handling it was presented.

211. Power Train Twin turbine torque converter, which employs CAT technology, and the power shift transmission features compact structure, high efficiency, reliable performance, and operational ease.

212. The fracture reason of turbine bolt was analyzed by means of metallographic and mechanical testing.

213. Dongfang has exclusive rights to the 5 MW full conversion wind turbine designs in China and plans to begin supplying the wind turbines for the worldwide offshore market in 2012.

214. This paper studies virtual design of pitch angle transmission and control system of wind turbine.

215. Taking a triple pressure reheat HRSG in the gas-steam combined cycle as an example,[http:///turbine.html] a general expression of the steam turbine thermal efficiency to coupling parameter with the unfired HRSG is derived.

216. Combustion reactions in a gas turbine are processes of high irreversibility, and therefore of lowe exergy efficiency.

217. A turbine placed there would thus generate more power than its inshore or onshore cousins.

218. Superconducting technology is applied in turbine generator, which will in turbine generator history to create a new leap.

219. It is found out that the approximate thermodynamic performance of the steam turbine in a combined cycle plant is determinate when the PPTD in HRSG and the parameters of the gas turbine is known.

220. The test results have already been put into use as major reference data during the engine design, finalization and determination of turbine disc guaranteed life.

221. The impulse turbine unit is normally used in high water-head power stations, whose diversion system is long and is likely to cause pressure fluctuation.

222. As for the francis turbine, this paper generalizes the characteristics of complete characteristic curve nonlinear model and internal character analysis nonlinear model.

223. The wind turbine generator overhauls what is the standard flow?

224. An experimental investigation into the properties of the wake behind a horizontal-axis wind turbine (HAWT) rotor is carried out at model scale, using a single slanted hot-wire probe.

225. Based on research of lube leakage of the vertical turbine principal axis, the leakage reason is analyzed.

226. Process management systems for firing control, fuel flow and automatic turbine - up are controlled by delicate instrumentation.

227. For critical turbine applications, dual coil option is available. Learn more from Hydraulic Amplifier product spec 89007.

228. The flow and thermal fields within the infrared signature suppression(IRSS) device of a marine gas turbine exhaust system were investigated numerically.

229. To improve tracking and disturbance rejection properties, the input state and input output feedback linearization methods are used to design the control laws of a boiler turbine system.

230. An optimization design method tower structure of 600 kW - Wind Turbine was adopted herein.

231. The company manufactures a range of components for aerospace gas turbine engines.