1. Diamonds have extreme resistance to abrasion.

2. There seems to have been some abrasion of the surface.

3. She had a small abrasion on her knee.

4. Leather is strong, abrasion resistant and will conform to the shape of the foot.

5. The purely surface nature of the abrasion of beach pebbles may be deduced from flint beaches.

6. The fragments tend to wear, and abrasion during transportation rounds the particles.

7. Understandably, the annulment process is, for some, another abrasion on the wound of the break-up of a marriage.

7. try its best to gather and make good sentences.

8. Its strength and abrasion resistance have made it ideal for shoe cleaning cloths, as provided by most hotel chains.

9. The impact abrasion performance of martensite steel was studied.

10. Abrasion tests are universally carried out under atmospheric conditions.

11. To erode or be eroded by abrasion.

12. Resistant to rot, abrasion, marine growth, gasoline and oil.

13. Abrasion resistance, compression resistance, impact resistance and elastic.

14. Considering crushing efficiently hard and abrasion proof stuff, JCE series crusher adopted international advanced technology is the first choice.

15. Vibration can cause damage to products by abrasion, fatique and overstress and may contribute to early product failure during use.

16. Metal friction and abrasion wear are resulted from mechanics, physical and chemical effect. It is a process in which mechanical, heat, chemical effects synthetically take effect.

17. The abrasion of the slideway is the basic reason to the decreasing precision of the slideway of the machine tool and produce influence on the inaccuracy of manufactured components in different ways.

18. Abrasion wearis taken as the main wear mode in the experiments.

19. The success of diamond in cutting silicon is a measure of diamond's extreme resistance to abrasion.

20. The raft had to flex to survive, but there was a serious penalty: the constant movement produced tremendous abrasion.

21. Both have a high visibility silver paint finish which protects against knocks and abrasion.

22. In a similar experiment, a greater variety of clast sizes has been used to test bone abrasion.

23. It may carry genes for delicate surface ornament, yet be worn smooth by abrasion.

24. Bio-inert medical polyurethanes offer advantages in the design of medical devices and artificial organs owing to stability, abrasion resistance and good mechanical property.

25. The carbamido lubricating grease having additive function provided by the present invention possesses high dropping point, fine anti-corrosiveness and abrasion resistance.

26. This equipment adopts the titanium nitride metal mixing techs forming ion gold membrane with good abrasion resistance, therefore it fits for various top-grade decorating membrane.

27. By measurement the displacement of the defocused spots center on CCD, the abrasion of the train wheel train wheel is calculated.

28. The result shows that the cutter blade edge radius, edge angle, the linear abrasion and the edge notch depth are main factors affecting its sharpness.

29. The cast alloy steel bit-sharpener has been prepared by pouring the chrome abrasion resistance steel and the low-alloy steel with fine impact resistance one-step using cast-in technique.

30. For material plastic, rubber, plywood, glass, painting, textile...etc, this abrasion tester provides a wide range test through different grinding wheel.

1. There seems to have been some abrasion of the surface.

31. Adhesion test using cellophane tape and abrasion test using Tabore Abrasion Tester in the quality control of curtain wall glass are also discussed.

32. Lubrication and good abrasion resistance strong, and prolong engine life.

33. Partial abrasion of rod string in screw pump well which is surface driven is the main reason that restricts its application, but the prevention method used presently cant solve the problem radically.

34. In order to avoid the "midconvex" of tooth profile and the serious abrasion in dedendum , the technology of center distance variation was adopted.

35. An abrasion resistant coatings on metal substrates, based on ceramics as aggregate and monobasic aluminum phosphate as binder, mixed with various fillers, has been developed.

36. The hardening gradient and the character of abrasion in hardening layer of hypoeutectoid steel with two kinds of matrixes that was treated by laser beam have been studied.

37. The design of a waste heat boiler as well as methods concerning the ash deposit, abrasion and flue gas leakage for the petrochemistrys catalytic cracking process are introduced.

37. try its best to collect and make good sentences.

38. Piston is a key component in an engine, working conditions is very poor, ring groove and head section are prone to appear abrasion wear and fracture failure due to sever impact and friction.

39. Methods:Macrography was used to observe the morphology of the mesiobuccal root, the degree of abrasion, the morphology of the floor of pulp cavity, the number and type of apical foramen.

40. Light stability and the influence of abrasion and laundering on long-term functionality are additional considerations.

41. Using abrasion machine, under different lubrication condition, the influences of lubrication on friction coefficient, wear quantity and service life of needle die were studied.

42. Experiments were conducted to compare the abrasion resistance of epoxy resin modified with polyurethane, epoxy modified by butyronitrile, and some alike coating materials from abroad.

43. Abrasion paper Good grade of manila or other strong paper, coated with glue and an abrasive material, such as sand, emery or carborundum. Also called Emerypaper, Sandpaper.

44. Cold working die steel with high abrasion resistance for general use , super hardenability andminimalquenched stress.

45. From the experimental results we find that, using PEEK as the core material of the artificial intervertebral disc is better in the abrasion and the distortion than using UHMWPE.

46. This article has discussed in detail the revised context in standard of abrasion resistance of coatings and indicated the scientificalness and rationality of the revised standard.

47. The guide bearing lubrication performance of hydropower sets is directly relative to the problems of shafting abrasion and vibration.

48. Col workingdie steel with high abrasion resistance for general use , Super hardenability and minimal quenched stress.

49. Aimed at the abrasion of pins, some experiments were carried out and the abrasion course was analyzed, the abrasion course of pins is the breaking-in, the abrasion wear and adhesive abrasion.

50. Features: imported tungsten steel, high abrasion resistance , anti - broken. Mainly applies to: acrylic and density wood cutting.

51. The character of few knots, high tensile and abrasion resistence is famous in the customers.

52. When a surrounding groove is arranged on the bearing , abrasion is alleviated on the bearing surface.

53. It is obvious that the low temperature nitriding process improve the abrasion - resistance of metal materials.

54. The result shows that the device can reduce the contact force between the vane's outside and the cylinder bore wall and decrease the friction waste and abrasion of the vane compressor.

55. The product, made of import materials, with the features of abrasion proof, good thermal diffusivity , is mostly applied to woodworking, -marble processing, steel industry and so on.

56. Under a presupposition of that its frog wasn't worn, a simple formula for calculating the abrasion limitation of DZ(DSZ)35 plowshare was brought forward in the paper.

57. Second, introduces the reason for the explosion of economizer, which mainly is erosion, abrasion and vibration.

58. Objective To probe abrasion technique of the petrous bone via modified partial labyrinthectomy petrous apicectomy (PLPA) approach.

59. She affirms to abrasion the chaplet that arise to be pears.

60. The frictional resistance of Babbitt glide axel blush is great. In particular, when the mill starts working, static frictional resistance moment of force is great as well as the abrasion of tiling.

61. The abrasion, press and rigidity of squeegee determine the print quality.

62. Also , severe biofouling, physical abrasion, and chemical etching of the glass may erode the sensing surface.

63. The type of Complex Wave formed due to the abrasion is very divergently shaped.

64. For example, "defend radiation", "anti-electrostatic", "high abrasion proof", "suction dust" etc. function.

65. It ? ? s application tests showed that it was perfecter oligomer with flexility, weatherability, adhesion, hardness, abrasion resistance.

66. The results indicate that oil-distributing pair runs in boundary lubrication condition, and it is mainly abrasion wear.

67. The rivet heads are in good condition and without abrasion.

68. Effect of microelement on the microstructure and wear resistance property of special brass have been investigated by SEM, abrasion machine etc.

69. The main wear mode of PPS is changed from adhesive wear into abrasion wear with the addition of PTFE and kaolin nanoparticles.

70. It is demonstrated that the manganese alloyed cast iron has high strength, good rigidity, dimensional stability, compression resistance and abrasion resistance.

71. The abrasiOn wear of ore-accumulation drive-over hopper is an important factor restricting increasement of equipment operation rate and production capacity.

72. A new test device which determines the abrasion and friction coefficient of rollers was designed.

73. Eutectic composition should be adopted for high - Cr white cast iron used under high - stress impact abrasion condition.

74. Highly resistant to abrasion, sea water, crude and fuel oil.

75. The shot-blasting machine discharge valve has flexible operation, reliable seal, uneasy abrasion and good consistence for the double-valve control.

76. The main symptoms were subconjunctival hemorrhage, corneal epithelial abrasion, eyelid skin laceration.

77. Is the abrasion paper attached properly to the abrading plate?

78. An experiment using electric resistance analogic method was carried out to study the surface abrasion of the internals in circulating fluidized beds (CFB).

79. Semicircle steel sheets were welded on the wall of evaporation pipes in fluidizedroaster for anti - abrasion.

80. The yarn is extremely du - rable and highly resistant to abrasion , ozone and biological attack.

81. This product is highly elastic, and flexibility, abrasion resistance and flame resistance.

82. They have found a main reason of poor abrasion resistance of the first cane mill roller is due to its poor casting quality during melting and casting.

83. Foreign body in the erosion and abrasion, or loose fill the loss of this flexibility is sealed letter fill the main reason for failure.

84. Lubrification degradation of low sulfur diesel oil causes oil pump abrasion of engine.

85. Conclusion Occlusal splint removable denture was effective in the treatment of TMD with anodontia and serious dental abrasion.

86. Test show that wear loss of developed friction disk is less, anti- abrasion properties and employment lifespan is superior to that of asbestos friction disk either in normal or sliding case.

87. Objective To investigate the relationship between tooth abrasion and long - term chewing betel nut.

88. Compounding with the PUD , many improved properties can be contributed to the paint film, such as high hardness, gloss, buildiness, adhesion and resistant to water, chemicals and abrasion etc.

89. Abrasion tests were carried out for the walls of pipeline for iron ore concentrate slurries by connecting a length of test pipe in series with the pipeline.

90. RESULTS To build effective system and decrease abrasion and uselessness of oral apparatus.

91. During the follow up period, meibomian gland orifice obstruction, dry eyes, corneal abrasion with foreign body tract were noted.

92. This results in large liner consumption. In this paper the abrasion reason of high-manganese steel liner is analyzed. The result indicates inapplicability of manganese steel to making liner.

93. Wear resistance—The chip-tool and chip-work interfaces are exposed to such severe conditions that adhesive and abrasion wear is very common.

94. The aluminium dihydric phosphate coating is prepared and the properties of high temperature resistance, thermal shock resistance and abrasion resistance are studied.

95. Through studying a large number of existing domestic and abrasion test methods, and analyzes their advantages and disadvantages, this paper advanced a new method of detecting the wheel tread.

96. Composite alloy coatings of intermetallic compound dispersed and distributed in amorphous alloypossess excellent corrosion resistance and abrasion performance.

97. The dry bottom ash extraction system boasts low operation speed,() less abrasion and long service life.

98. Deflective occlusal contact is induced by ex-cess and asymmetric abrasion, which is a common form of occlusal disease.

99. The microstructure and mechanical properties of the composite were carried out by optical microscope, electric scanning microscope, XRD, microhardness and three-body abrasion wear tester.

100. The abrasion wear mechanism of Mn copper - nickel alloy matrix - cast chromium carbide composite was studied.

101. Erosion of pipes and vessels from abrasion by particles can be serious.

102. No longer abrasion and erosion of lining caused by conveyed fluid particles.

103. According to the procedure used, steel can be hardened to resist cutting action and abrasion, or it can be softened to permit machining.

104. According to the loading cycles, the fatigue damage represented bend in loading area, worm- eaten abrasion or exfoliation around loading area and sequent massive exfoliation .

105. It is pointed out that the disappearance of isospin effect comes mainly from the geometry effect in abrasion stage and the evaporation process later.

106. The abrasion wear mechanism of Mn copper-nickel alloy matrix-cast chromium carbide composite was studied. Vacuum infiltrating casting method was employed to produce the composite.

107. Currently, when a material with high grindability is transported in the pipeline, pipeline abrasion is generated, particularly the bent pipe abrasion(), is more prominent.

108. The effects of fiber twist and dipping treatment on the mechanical properties and resistance to abrasion and wear of ultrahigh molecular weight polyethylene (UHMWPE) fiber were studied.

109. Antiwear properties of high carbon and silicon steel casting have been studied through trial abrasion test.

110. The effects of Si content on wear properties of Si-modified high aluminum Zn-based composites were investigated by abrasion test under dry friction and oily lubricated friction conditions.

111. Compared with high abrasion furnace black reinforced EVM vulcanizate, the vulcanizate containing MDMA had good agi ng resistance properties.

112. Study shows that quenched boron eutectic structure possesses the excellent wear abrasion property.

113. The abrasiveness of hot deformed low chromium semi-steel was studied through the impact abrasion test. the characters of abrasion surface was analyzed.

114. This type of equal arm balance with double beam and pan adopts flexible steel band as support without abrasion to the edges of the knife.

115. An engineering model on mass abrasion of kinetic energy(KE) penetrator is presented to predict the nose shape and mass loss of the residual projectile after high speed penetration into concrete.

116. The present invention provides a belt for a papermaking machine having excellent property such as crack resistance, abrasion resistance and hair crack resistance.

117. The printed substrates have images which are stable even when subjected to the heat and abrasion from a process which provides a shrink-wrap over the printed substrate.

118. For measuring abrasion of catalyst particles, three basic attrition test apparatus are used.

119. It's a two-component, solvent-borne, self-curing, inorganic zinc silicate paint with outstanding resistance against weathering and abrasion.

120. As one of the admixture, silica ash concrete not only has the supper property-erosion and abrasion resistance, but also can improve the strength and impermeability .

121. The network bonding point is firm, but is not slip. The ball shaped plastic avoids the network contacting floor directly, and reduces abrasion, further prolonging the net service life.

122. The wear mechanism under all test situations is abrasion wear and plough wear.

123. The abrasion wear of the carbonization layer is 1 592.5 times as less as that of pure titanium.

124. Frosting occurs when two fibers differing in both color and abrasion resistance are combined a fabric.

125. With superfine abrasion performance and excellent elasticity, anti - skid treatment on surface.

126. The abrasiveness of hot deformed low chromium semi - steel was studied through the impact abrasion test.

127. The two body abrasion wear characteristic of Mn copper nickel alloy matrix cast tungsten carbide composite has been studied using high chromium cast iron as a reference material.

128. The paper analyzes the causes of short operation period and quick abrasion of piston rings.

129. Bainite has higher abrasive wear resistance than tempered martensite with equal or higher hardness in hard abrasion, but in reverse in soft abrasion.

130. Thesurface hardness, corrosion resistance, abrasion resistance and light fastness as well as the surface colour of metals can be improved through oxidizing and Colouring processing.

131. This article introduces a means of NC program about rough cut of helicoid base on helix-milling. The means can improve efficiency of cutting, reduce the cutting abrasion, depress the operating costs.

132. This analysis is helpful to the research of derailment and abrasion machenism.

133. The utility model has the advantages of low power consumption, high work efficiency, low abrasion wear, long service life of vulnerable parts, simple conformation and convenient operation.

134. According to the analysis of the performance of antifriction by using abrasion tester, coefficient of friction and wear loss were measured on the conditions of regular feeding oil and no oil.

135. The invention has abrasion resistance and high precision and can regulate the precision of the ink-jet printer at any time during use.

136. The auger of the extruder adopts abrasion - resistance metal powder spray - painting technology.

137. The better effects are obtained with the waste hard tyre as the abrasion resistance material in the project.

138. Being applicable for gasoline and diesel engine Fine abrasion proof elements prevent engine from being damaged in the cleaning process.

139. The poly(tetrafluoroethylene) particles untreated with quenching showed poor abrasion performance with 22% wear rate after 10 weeks, despite better scale-preventing and scale-removing performance.

140. And common pantograph slider prepared by powder metallurgy technology usually causes serious abrasion of the conducting wire.

141. COUCLUSION: The cavity which made with air - abrasion has more normal dentine and is suitable to resins.

142. PK multiple V-belt is applied as transmission belt to resist wear and abrasion and avoid troubles like belt creep and noise caused by traditional belt transmitting system.

143. Made by alloy, fastened on the outsole. The sole will be anti - abrasion.

144. Objective To investigate clinical the effect of occlusal splint removable denture on temporomandibular joint disorder(TMD) with anodontia and serious dental abrasion.

145. Wear resistance of cake cutting knives using a special abrasion - proof material.

146. Wear tests of 45 steel, as standard sample, and D8, D9 wear - resisting surfacing materials were carried out by sand slurry abrasion tester with vertical multi - clamps under concrete condition.

147. The lead rail was redesigned to make it more high strength, and the rail working face higher rigidity and higher abrasion performance according to the actual situations.

148. Superior abrasion - resistance, Dust - proof : Impact resistance, Very easy to construct, and maintain.

149. Co hard alloy welded sealing surface, which is wearing resistant, erosion proof, abrasion proof and long-lived.

150. Superior abrasion - resistance, dust-proof : Impact resistance, Very easy to construct, and maintain.

151. In order to raise product performance such as abrasion resistance, proof radiation, heat stability and so on, polyisocyanate is applied extensively as a cross-link curing agent for polyurethane paint.

152. Tempering treatment resulted in formation of tempered martensite and the spalling resistance under repeated strong impact abrasion working conditions was largely improved.

153. With advanced abrasion proof springiness rubber paint on the body of machine.