(1) Signal voltage gain is always accompanied by greater signal current attenuation and viceversa with a transformer.

(2) The first sub pixel has a threshold value signal voltage lower than that of the second sub pixel.

(3) The development and research of the present small signal voltage stability are summarized and reviewed.

(4) If this occurs, distinguishing between a change in signal voltage and a change in thermoelectric EMFs becomes impossible.

(5) To deliver the maximum signal voltage from driver to receiver, the differential impedance must be low at the driver and high at the receiver.

(6) The mechanism of small signal voltage stability, analytical methods, the stability limit and the sensitivity analysis and application are described.

(7) The offset voltage adds directly to the signal voltage and can be modeled as an unwanted voltage source in series with the intended signal.

(8) Theoretical analysis and experimental results show that the amplitude and frequency of the output light intensity are linearly related to that of the sinusoidal signal voltage applied on PZT.

(9) The signal of arc voltage without distortion is got by use of photo-coupled isolator 6N136 to insulate signal voltage from arc voltage.

(10) Memory cell capacitance is the crucial parameter which determines the sensing signal voltage, speed, data retention times, endurance and against the soft error event.

(11) The resistor values at the throttle signal must allow the throttle signal voltage, say 1-4 Volt swing, to drive the VAPOR RATE.

(12) Generally, because the output voltage signal is very weak, the signal voltage and the noise voltage can't be distinguished.

(13) The buffer differs from the current amplifier as it sets out to provide whatever current level is demanded from it in order to maintain the signal voltage told to assert .

(14) The effects on the contrast of the LCLV projecting system, such as the LCLV driving signal voltage, frequency, duty cycle and the display screen illumination were analyzed.

(15) Which can be used for direct observation of the input signal voltage waveform.

(16) The constant current supply for the input circuit is adopted, improving the linear relation between the signal voltage V, and temperature T.

(17) The jet velocity and jet patterns are studied at different work status, such as different signal voltage amplitude, frequency and signal mode.