1. The sundae was topped with chocolate and a wafer.

2. A wafer thin translucent something undulated through the air towards her, chuckling gently to itself in a liquid voice.

3. The wafer was in his mouth and the sweet wine, but he wanted more.

4. The brittle wafer dissolving against the roofs of their mouths was their promise of life in a world beyond Holy Hill.

5. They are made from wafer biscuits and cost ￡10.80 for a box of 120.

6. It was fashioned from dark green plastic, wafer thin, yet of considerable weight.

7. Hot plate with silicon wafer lowered to heating position.

8. Now people can produce a wafer silicon.

9. Also, the PL spectral peak vary over the wafer.

10. Semiconductor wafer manufacturing: batch, semi-automated 25-wafer, single or dual chamber chemical stripping, developing and cleaning tool.

11. The Pope then brought out a communion wafer and a chalice of wine.

12. The print circuit wafer uses the vanguard technology and the equipment production with the processing glass cloth, has the fine electric insulation performance and workability.

13. Base emitter metal self aligning, air bridge, and wafer thinning are used to improve microwave power performance.

14. Premium Wafer - A wafer that can be used for particle counting, measuring pattern resolution in the photolithography process, and metal contamination monitoring.

15. Single wafer, multi-chamber process platform for cassette-to-cassette cleaning, etching, developing and electroplating (ECD).

16. FRP wafer board technology is adopted as penetration in clean room of electron chip production base.

17. Backwardness in high quality epitaxial wafer has limited greatly the development of Chinese LED industry.

18. She opened her mouth to receive the papery - thin wafer.

19. Screen-printed silver metal contacts on the surface of the wafer collect the streams of electrons and produce an electric current.

20. She and Justine developed a long distance friendship, cemented by immensely long letters on wafer thin paper.

20. try its best to gather and create good sentences.

21. If only I had a duck's back instead of wafer thin skin.

22. Later, we carried steaming hot water through the Buffalo snowdrifts to thaw our chickens' wafer bucket.

23. As a result of slot effect and end effect, the stationarity and moving accuracy of the wafer stage are reduced. it is needed to compensate the force ripple of the linear motor.

24. Shown here is a photomask, which bears the patterns that will be printed onto a wafer.

25. Primary Orientation Flat - The longest flat found on the wafer.

26. Electrostatic combs, exciting the tines to vibrate laterally in antiphase in the plane of the wafer, and detecting the vibrating frequency in the meantime, are mounted on the two tines of fork.

27. Laser Light - Scattering Event - A signal pulse that locates surface imperfections on a wafer.

28. In the thesis, the fabrication processes is compatible with SOI and ordinary silicon wafer, dielectric mirror and metal mirror.

29. The sucking device has a sucking-disk structure which contains multi-sucking mouths and gyral grooves in order to minimize the deformation of the wafer.

30. Catering to local tastes, Kraft also made a radical move by launching new Oreo products like Oreo Wafer Sticks, Oreo Wafer Rolls, Oreo Soft Cakes and Oreo Strawberry Creme.

31. It is noted that there is a thin fluid film between the loaded asperities and the wafer being polished in CMP process, thereby a flow system with nano scale film is formed in.

32. They can be classified into wafer level, chip level, and package level stacking.

33. Another is a ceramic dielectric waveguide covered by a silicon wafer with high resistivity.

34. Then, from the balance point of the two phases, a new model, which can quantitatively describes the generation rate of oxidized layer on wafer surface in CMP is developed.

35. By the steps, the position of the chip at the wafer is determined according to the label on the chip, thus determining the mass of the whole wafer.

36. Ensure real closing - tube diffusion on wafer inside quartz tube.

37. The sub-threshold current test, which is often done at the wafer level, is a measure of how quickly the device will turn on and off.

38. A silicon wafer bonding technology and its application to new dielectric isolation combined with conventional V-shaped grooves are described.

39. It is the best ideal equipment to trial-produce or produce in small batch to suppress various kinds of particles form grain to wafer and abnormity .

40. The differential microphone is formed using silicon fabrication techniques applied only to a single, front face of a silicon wafer.

41. Anisotropically conductive connector, probe material member, wafer inspection apparatus, and wafer inspection method.

42. The method is to coat a wafer of silicon with a protective layer of silicon dioxide.

43. Adsorption state varied from physisorption to chemisorption and linkage with wafer finally along with time.

44. All valves should have flanged connections. Flangeless, wafer or lugged flange style control valves shall not be used.

45. Embodiments of the disclosure include use as a wafer level underfill, and an encapsulant for electronic chips.

46. Single - wafer processes use higher pressures than the batch processes.

47. In this paper, the area contact model of depletion layer width under avalanche breakdown in Si epitaxial wafer by a three-probe method is analysed. The theory accords with experimental results.

48. The wafer is a piezoelectric resonator, expanding and contracting in response to electrical voltages at a precise, extremely high frequency.

49. To make production plan according to customer requirement and Wafer Manufacturing capacity.

50. Schottky Barrier Diode Wafer 40 Mils, 150 Volt, 1 Amp.

50. is a online sentence dictionary, on which you can find excellent sentences for a large number of words.

51. The experiment of fully automatic reactive ion etching on 3 inch GaAs wafer is described.

52. Mechanical Test Wafer - A silicon wafer used for testing purposes.

53. Attribute to SOI wafer and deep reactive ion etching technology used, the fabrication process of the sensor is easy to control.

54. Water for electronic industry use: the wash water of electronic components, such as: integrate circuit, silicon wafer, display tube, electrode tube, and circuitry tube, etc.

55. In the vacuum holding module of wafer, the vacuum monitoring circuit is designed in order to collect and monitor the vacuum pressure in real-time.

56. Wafer, on the other hand , is the classic NBA enigma.

57. But integrating a novel memory process together with a logic process on a single wafer without compromising one or the other could be difficult.

58. Like a crossing guard, the wafer sends the cells in different directions.

59. In order to reduce the thermal conductivity and heating capacity and increase the detectivity of array, the suspended structure was formed on silicon wafer by chemical etching of KOH.

60. This accelerometer is fabricated by N type silicon wafer. To obtain high aspect ratio structure, deep reactive ion etching(DRIE) process is employed.

61. Waviness - Widely spaced imperfections on the surface of a wafer.

62. And shall take the boiled shoulder of the ram, and one unleavened cake out of the basket, and one unleavened wafer, and he shall deliver them into the hands of the Nazarite, after his head is shaven.

63. Disclosed is a method and system for testing IC in wafer stage by using passive electric network.

64. A wafer of a moon was shining over Gatsby's house, making the night fine as before.

65. Li is China's largest electronic silicon and silicon wafer manufacturing company.

66. Electroglas has been in wafer prober business for over 40 years.

67. The demands for the automatic wafer transporting system used in E beam exposure machine and its constitution are introduced in brief.

68. She tilted back her head and opened her mouth to receive the papery thin wafer.

69. Particle - A small piece of material found on a wafer that is not connected with it.

70. The ZSFD Wafer Signal Butterfly Valve consists of the wafer butterfly valve and electric control device.

71. Applicable scope: semiconductor wafer, optical glass, horologe parts, glasses, jewelry, polyester filtering cores, etc.

72. In summary, dry film photo - resist was applied to the wafer level high frequency flip-chip packaging process.

73. The athletic Wafer did much of his work against Bryant.

74. According to birefringence principle, study of two-dimension state of stress in silicon wafer has been made by the"three- direction observation method"of infrared photoelasticity.

75. The microscope comprises a silicon wafer filter membrane which is highly- planar and does not fluoresce.

76. With the fast growing portable electronics market and higher need of wafer test, power consumption problem of built in self test (BIST) has attracted more and more considerations.

77. Further growth of continuous compound semiconductor thick films (15) or wafer is achieved by epitaxial lateral overgrowth using HVPE.

78. Cook rolled out the pastry till it was as thin as a wafer.

79. Using the photovoltaic spectral response of epitaxial P-N junction, the paper suggests a method of determining the minority carrier diffusion length in N layer of N/P epitaxial silicon wafer.

80. There are three procedures in LED production, namely epitaxial wafer,[http:///wafer.html] tube core and encapsulation.

81. Researchers view each hair-thin wafer of brain tissue under a microscope outfitted with a laser for precision dissection.

82. A novel in - situ non - flatness measurement method of wafer chuck in step - and - scan projection lithographic tool is presented.

83. This paper presented one single chip micro inertial measurement unit based on ordinary bulk micromachining process such as dissolved wafer process.

84. Surface Texture - Variations found on the real surface of the wafer that deviate from the reference surface.

85. Surface Texture - Varis found on the real surface of the wafer that devigot from the reference surface.

86. The research and application on dicing technology of wheel wafer dicer directly decides the relevant equipment application status.

87. The quality requirements on Si wafer for modern ULSI, research progress on CZ Si crystal growth technology and wafer processing, the market situation and prospect were outlined.

88. They were first in the market with a commercial wafer prober in 1963, and the first with the fully-automated prober, the 2001, in 1982.

89. A double-deck plasma enhanced chemical vapor deposition (PECVD) facility was used to prepare silicon nitride film on the finely polished (100) plane ofp-type single crystal silicon wafer.

90. Work in Process (WIP) controlling approach was proposed to cope with the complication of wafer fabrication, such as large number of equipments, long cycle time and reentering process flow.

91. These vendor functions must be integrated for functions such as wafer fabrication, wafer test, module build, and module test.

92. A method for improving the critical dimension uniformity of a patterned feature on a wafer in semiconductor and mask fabrication is provided.

93. During the testing of the integrated circuit (404), it communicates in the wafer test mode .

94. The effect of rapid thermal processing(RTP) on oxygen precipitates profile and denude zone(DZ) in Czochralski(CZ) silicon wafer during simulating CMOS processing is investigated.

95. Die: Integrated circuit chip as diced or cut from a finished wafer.

96. To make the criteria and method with no loss and fasting resolution for received wafer and mixed-up wafer, apply to produce.

97. Crater - Visible under diffused illumination, a surface imperfection on a wafer that can be distinguished in!

98. Wafer has been an effective rotation player, averaging 9.7 points and 17.8 minutes in the playoffs.

99. Lithographic tools for transferring Lilliputian circuitry onto a wafer cost up to $ 50 m a pop.

100. Egyptian priests practiced "transubstantiation", claiming to be able to transfer the sun god Osiris into a circular wafer.

101. It's suitable to have shell test and seal test for flanged end butterfly valves and wafer type butterfly valves.

102. In this study, ozonized water in the single wafer processor was used to study photoresist stripping.

103. Therefore, to predict and control the evaporation rate of IPA inside nano-pores on the wafer surface has great significance for wafer manufacturing.

104. A thin , crisp wafer or biscuit, usually made of unsweetened dough.

105. WAT ( Wafer Acceptance Test ) is a very important stage of process.

106. Tetrahedral amorphous carbon (ta-C) films have been deposited on P-type (100) polished c-silicon wafer with different substrate negative bias by filtered cathodic vacuum arc technology.

107. Measures have been discussed for preventing the Al film for being pierced through by the probe in wafer probing on the 1034 Wafer prober.

108. A new agent-based dynamic scheduling approach for semiconductor wafer fabrication was proposed, which integrated release control, dispatching and machine preventive maintenance scheduling.

109. Mainly applies in the print circuit wafer, is electronics industries and so on the electronic accounting machine as well as communication equipment the essential foundation material.

110. The drilling machine for large glass wafer processing is a production machine for silicon pressure sensors.

111. RAINBOW (Reduced And Internally Biased Oxide Wafer)piezoelectric ceramics are a new type of stress-biased, unreduced -reduced composite ceramics,[http:///wafer.html] which have a special arc structure.

112. Hot plate with silicon wafer in initial configuration ( before heating ).

113. In this work, RAFT grafting polymerizations from silicon wafer were investigated.

114. JCF: I don't know if you're aware of this, but our play-by-play guy Craig Ackerman won't stop gushing about Von, and has even confessed to having a serious man-crush on Mr. Wafer.

115. This is achieved by using a unique multi beam technology, demonstrated in figure 2, which reduces the power density, minimizes the thermal load, and reduces the kerf width in the wafer.

116. To smooth the surface of a wafer or semiconductor crystal.

117. The Plasma Batch System 300 is a compact Microwave Plasma Batch System for resist ashing and wafer cleaning in semiconductor applications.

118. Pit - A non - removable imperfection found on the surface of a wafer.

119. So, if 20 areas have defects from dust or scratches on a single wafer generating 2,000 LSI chips, there would still be at least 1,980 usable chips in the batch.

120. Wafer chip scale packaging(WCSP) eliminates conventional packaging steps such as die bonding, wire bonding, and die level flip chip attach processes.

121. The fabrication techniques with dissolved wafer process of sensitive element are expressed.

122. The wafer bumping process in Ball Grid Array (BGA) packaging has three characteristics: long machine setup time, dynamical arrival of orders, and re-entrance of operations.

123. A novel in - situ non - flatness measurement method wafer chuck in step - and - scan projection lithographic tool is presented.

124. We really have not had a big enough sample to determine Wafer really is.

125. However, concerns about cycle time are driving development of single wafer cleaning processes.

126. This paper presents a new solution of minority carrier continuity equation for a wafer with different surface recombination velocity on its two surfaces.

127. March 30, 2010 - Canfield Connector's Interposed Lighted Wafer is a state of the art,[http:///wafer.html] electronic lighting indicator module for installation between a DIN type coil and its mating connector .

128. Cooling Machine is used for transporting the wafer to the Cream Spreading Machine through air-cooling environment.

129. PVDF square wafer carriers for solar cell were developed by injection molding method.

130. The invention provides a semiconductor wafer, a semiconductor chip and a method and an apparatus for processing the wafer.

131. Standard wafer, TAPPI face - to - face for easy replacement of leaky standard knife gate valves.

132. Smudge - A defect or contamination found on the wafer caused by fingerprints.

133. Single wafer silicon epitaxial CVD equipment has very good thickness a nd resistivity uniformity.

134. The local heights of wafer surface are measured by the linear variable differential transformer (LVDTs) when the different offsets between wafer and wafer chuck exist.