1. After drilling for several weeks they finally struck oil.

2. They're drilling a new tunnel under the Thames.

3. This new model of drilling machine can bore through solid rock ten metres deep.

4. Extensive exploration was carried out using the latest drilling technology.

5. The drilling troops mustered on the hill.

6. We watched the soldiers drilling on the parade ground.

7. They had accidentally damaged a gas pipe while drilling.

8. They were drilling through solid rock.

9. They're drilling for oil off the Irish coast.

10. They obtained information about the rock by drilling boreholes.

11. He was rudely awakened by the sound of drilling.

12. The soldiers were all out drilling.

13. The sergeant was drilling the new recruits.

14. Drilling is due to start early next year.

15. Drilling regulations, too, have been loosened to speed the development of the fields.

16. The company is drilling for oil in the North Sea.

17. The decision to allow more offshore oil drilling angered some Californians.

18. For those uninitiated in scientific ocean drilling, the previous record was a little over 4 km.

19. She was drilling the class in the forms of the past tense.

20. The air-raid alarm went on drilling away from the gate.

21. New recruits are often broken in by repeated drilling on the square.

22. If they strike oil, drilling will begin early next year.

23. Drilling will continue on the site to assess the dimensions of the new oilfield.

24. The new drilling equipment has been on order for several weeks.

24. is a online sentence dictionary, on which you can find nice sentences for a large number of words.

25. After months of drilling, oil was found off the coast.

26. No further exploration drilling is planned for this year.

27. She felt the reverberation in her chest and cursed the drilling outside.

28. A group of senators plans to filibuster a measure that would permit drilling in Alaska.

29. Yuki is working up an in - home phonics program slated for Thursdays , and I'm drilling her on English conversation at dinnertime.

30. We had to make sure the land was fit for drilling.

1. After drilling for several weeks they finally struck oil.

2. This new model of drilling machine can bore through solid rock ten metres deep.

3. Extensive exploration was carried out using the latest drilling technology.

4. He was rudely awakened by the sound of drilling.

5. Yuki is working up an in - home phonics program slated for Thursdays , and I'm drilling her on English conversation at dinnertime.

31. The appeal of onshore drilling is its comparatively cheap.

32. The team is still drilling.

33. It sounds like someone's drilling into the wall.

34. Then came innovations in horizontal drilling.

35. Engineers were to begin Monday an attempt to dry out the waterlogged San Pedro mountain by drilling two 300-foot-deep wells.

36. Some older men did enlist in the home guards and could be seen drilling each morning and evening.

37. Special drilling equipment is being used to tunnel beneath the sea bed.

38. Always check for electrical wires and eater pipes with a pipe and cable detector before drilling walls, floors and ceilings.

39. It pointed out that drilling levels were already falling and predicted this would mean a further considerable reduction.

40. Plans for the three-year exploration phase include drilling three wells and seismic studies at a cost of $ 13 million.

41. Scientists and administrators bickered over whether this should be a continuing program in ocean-bottom drilling or a one-shot drive to the mantle.

42. If this could be proved beyond doubt, direct drilling would fit in well with the organic philosophy.

43. Drilling for oil poses a threat to wildlife in the area.

44. They didn't believe in what was then the accepted way of drilling things into you.

45. Ice monitors have been out drilling and measuring, and already the flat sea ice is strong enough to walk on.

46. So beyond drilling simple sentences, it is necessary to drill larger stretches of speech. 7.2.5.

47. The plan has a hitch: drilling holes for the owls in the trees will kill the trees.

48. The plan envisions a 20-year program of everything from drilling and production to new pipelines and gas-processing facilities.

49. Naxos supplied Crete with emery, which was needed for drilling and polishing the stone bowls and vases.

50. The new technology could prove most useful in subsea drilling, where the expenses involved in stopping production are enormous.

51. Other contract services include straw and silage baling, cultivations and drilling, manure spreading, and grain haulage with two lorries.

52. Schoolchildren could spend days or weeks drilling for athletic and balletic displays in his honour.

53. Induced fractures or cracks occur at the borehole wall as the result of off-loading the stresses during the drilling operation.

54. If the drill is a success,[] it could reduce the numbers of offshore rigs needed for drilling at sea.

55. The amendment would put a moratorium on offshore drilling for oil.

56. Drilling was a difficult task, with good bullies causing the demise of many a parent's drill bit.

57. Drilling will establish whether reserves of 1m ounces can be increased.

58. They were given uniforms; there was a rudimentary organisation; they practised drilling and, in secrecy, weapons training.

59. The shallow drilling programme is central to the systematic survey of the continental shelf.

60. Of course, a basic corollary of the theory is that deep drilling should uncover a portion of these massive methane resources.

61. A key area of contention is the call for the wilderness to be opened to oil and gas drilling.

62. Their objective was to develop a model which quantified the permeability of rock as drilling proceeded.

63. The block is located in the Murzuk basin between proven oil discoveries and first drilling is expected in 1993.

64. This is because of the limited partnerships' tax losses while drilling, and the availability of capital allowances.

65. Seismic acquisition is likely to continue throughout 1992 and drilling activities are expected to recommence early in 1993.

66. He would not agree to suspend drilling but he gave an assurance that work would not re-commence until Wednesday.

67. The system uses well and log data to provide on-the-spot reservoir analysis, enabling drilling to be adjusted to maximise well productivity.

68. And as an aid to drilling, make a simple template from a length of batten.

69. It is important not to use conventional chucks for hammer drilling.

70. Other pieces were slid under a computerized drilling rig, to have boltholes drilled according to the shop drawing.

71. One of the drillers was told if drilling started he would be bored through the ground.

72. Industry representatives said the number of drilling rigs has doubled in a year to more than 900 because of the higher prices.

73. The behaviourist approach is repetition and the drilling to the point where the student automatically makes the correct response.

74. An important application of global geomagnetic field models is in directional drilling for oil production.

75. Myer carefully avoided the prickly issue of offshore drilling rights.

76. Hall's office at Dalhousie is decorated with souvenirs of the drilling expeditions he has since helped organise.

77. Also putting in strong years: aerospace and defense, oil drilling and medical device companies.

78. But one might be forgiven for doubting if this is the most likely cause of the toxic side-effects of direct drilling!

79. At Sellafield and Dounreay, drilling is being carried out to assess the suitability of the geological strata of the areas.

80. On the far southern plains, the oil towns of Plainview and Midland and Odessa rise like off-shore drilling rigs.

81. The project involves initial drilling and completion of 86 oil and 20 water-injection wells and installing a submersible pump system in each.

82. Carrying out the precision drilling in a delicate hip replacement operation is the world's first robotic surgeon.

83. The steady hum of the drilling rigs and the rough growls of heavy machinery moving on the road smear the coastal quiet.

84. Prior to drilling, the operator consulted local bodies such as the Royal Society for the Protection of Birds and the fishing industry.

84. try its best to gather and build good sentences.

85. We need a steady platform above the waves before we can start drilling.

86. The government also considered the drop in drilling costs -- and rising output from the average gas discovery.

87. A number of attractive prospects that have been identified will be given priority for early drilling.

88. Within 2 days of the start, an explosion had wrecked a drilling machine at a small non-union mine.

89. This week the company released new drilling results showing that nickel reserves are twice as large as expected.

90. They hope to quell public anxiety about offshore oil drilling.

91. More bullets spattered the front of the cottage, drilling lines back and forth in the stonework.

92. Ministry of Defence engineers have tried to solve the problem of the leaking oil without resorting to drilling into the wreck.

93. An initial seismic survey will be completed in 1993 with exploration drilling scheduled to begin early in 1994.

94. I heard the dentist start drilling, but I couldn't feel anything.

95. Pemex drilling platforms stand erect in the marshes north of Oxiacaque, like sentinels of an occupation army.

96. But mid-week forecasts of rain soon drove the market higher as traders cautioned against a possible interruption to spring drilling.

97. But the borehole must go deep enough to reach the aquifer, even if this means drilling far below the potentiometric surface.

98. But traditional drilling techniques could tap the oil in only a small number of these cracks.

99. Further exploration and appraisal drilling will be necessary to confirm the commercial potential for this discovery.

100. It is then hoped to expand its use to other joint surgery which requires precision drilling.

101. Niugini Mining said a second drilling rig is being mobilized and further drilling will take place following the completion of geophysical surveys.

102. Compact, accuracy variable speed drilling machine.

103. BE SURE OF ADEQUATE FAN BLADE CLEARANCE BEFORE DRILLING.

104. To stopping off-shore drilling, and the accompanying spills?

105. This power tool is used for drilling holes.

106. Special drilling or adits outside orebody may be required.

107. By drilling, geologists can take measurements at various depths.

108. Drilling Platform - Bo Hai 10 Maintenance.

109. Use this circuit to control the speed of revolutions of your drilling mill or bench drill.

110. Point - to - point systems are suitable for hole - machining operations such as drilling, countersinking, counterboring , reaming , Boring, and tapping.

111. One or more key marker beds were identified for the purpose of leasing and drilling.

112. exploratory drilling for oil.

113. Solid control on drilling fluid is an essential technique for under - balanced drilling.

114. As an importantorientation tool, adjustable stabilizer is especially suitablefor modern drilling.

114. is a sentence dictionary, on which you can find good sentences for a large number of words.

115. It is difficult to pull out the bolt with ordinary socket wrench that can not provide axial tension because of the bolt drilling hole deformation and the collapse of holes.

116. The effects of pressure, temperature and velocity variation of the bit nozzles on sonic flow were investigated taking supercritical CO2 gas drilling as an example.

117. The arrangement of drilling machine is divided into five areas: drilling platform, pump chamber, power supply area, solids control area and oil tank area.

118. Both jackup drilling rig and bucket foundation platform belong to shallow foundation structures.

119. The sand control of oil well pump is very important for drilling - production system.

120. Design copiously the hydraulic top drive taps the important parts of drilling motor.

121. During drilling, the positive colloidal solution is adopted to adjust the drilling fluid density dynamically, to ensure drilling at near balance pressure.

122. The certain placement of seed at the 12 - 20 mm level necessitates drilling rather than broadcasting.

123. This product sagely and effectively breaks conventional drilling mud, workover and completion polymers.

124. CASTON has experts from Xuanhua machinery plant with superiority down - the - hole drilling tool and anchorage drill pipe.

125. Advances in polycrystalline diamond compact( PDC) bits have sharply increased rate of penetration( ROP), reduced drilling time and costs in oil and gas wells.

126. Drilling rate should be based on the current changes and timely adjust.

127. Stones drilling bit: Use for drilling stones, concrete, firebrick etc.

128. Similar to the option to drill down by SQL statement, another way of drilling down to get the performance statistics is to drill down by transaction time.

129. The North Greenland Eemian Ice Drilling (NEEM) project reached bedrock in July 2010, at a depth of more than 2, 500 metres.

130. A portable torsional vane shear device has been developed to meet the needs of research work in marine geology, river exploration, geotechnics, oil drilling and soil mechanics.

131. In addition, anticipating market developments, Huisman develops special concepts as the containerized drilling unit.

132. In contrast , densimeter while drilling can overcome those defects by getting continuous and objective data.

133. To increase drilling weights in drilling, may effective1y raise the rate of penetration.

134. As for drilling mud but made up with 35 ppb Bentonite to 100 + vis.

135. This diagnosis has since been confirmed by deep - sea drilling.

136. This paper introduces the viscosity-reducing ability of new viscosity-reducing agent LGV in drilling fluid and preliminarily inquires into the action mechanism of LGV.

137. And we have CNC, CJK, Punch press, high-frequency heating machine, argon arc welding machine , drilling machine....

138. The air screw drill tool was power equipment which was designed for air drilling.

139. Although the risks of offshore drilling are much harder to quantify than the benefits, I believe the shift in the benefit-cost ratio has been large enough so that the time has come to allow drilling.

140. The major components of the rap oil seedcakes are protein, nitrogen-free lixivium , coarse fiber, crude fats, and ash content. These components have good filtration reduction in drilling fluids.

141. These new equipments can bring higher drilling rate, lower drilling cost and remarkable economy benefits.

142. To develop and produce the latest model, high performance, low, open-air pit for various models of drilling machinery, while the supply of accessories.

143. But, it is very necessary that terminal fans is included in the depositional models by field and drilling data.

144. Applicable to the valves, flange, the spherical bearing, such as the need to drill porous drilling processes using mechanical parts.

144. try its best to gather and create good sentences.

145. The drilling in sulphide mounds at the ocean bottom and their comparison with VMS (volcanogenic massive sulfide) indicate that they have similar internal structures and mineral zonation.

146. The primary function of the drawworks is to reel out and reel in the drilling line, a large diameter wire rope, in a controlled fashion.

147. Cutting head drilling rate is chosen as the aim of optimal design.

148. The mechanisms and characteristics for the polyglycol - based drilling fluid have been reviewed.

149. Oil drilling project is a special project which take the ground as the work object and has the high investment, high risks and high levels character.

150. These factors, which include slurrys preparation, circulation, depuration and so on, would influence drilling speed, bore quality, exertion of pile shaft resistance and base resistance.

151. Correct use of rate of penetration will give many aids to mud logging and well drilling.

152. There are two distinct aspects to the offshore drilling industry.

153. The paper mainly deals with the sampling methods and gas and mud analytic procedure in the field lab of the Chinese Continental Scientific Drilling project (CCSD).

154. So the distribution and the content of conglomerate were different, and its geological phenomenon in the data of drilling, outcrop, logging and seismal section in different area.

155. The degasification mechanism of a vacuum drilling fluid degasser, the matching of the vacuum pump with sewage pump and the selection of various parameters are discussed.

156. According to the relation between the temperature and the ratio of the diameter of the defrosting zone to that of the drilling bit, the volume of washing fluid is optimized.

157. Full cooperation and assistance of the drilling contractor is required in almost every instance.

158. To comply with the special request of protecting the formation and environment against damage on oil-gas field development offshore, a new drilling fluid system—methyl glucoside(MEG)was developed.

159. The California Democrat wants the federal agencies involved in off-shore drilling to be more effective.

160. In order to recover its production, it was determined to drilling a directional side tracking well Wangyun 2B well inside casings.

161. We provides drilling fluids engineering services both offshore and onshore.

162. Horizontal double sided NC combined drilling machine is specially designed for the machining of main shaft journal hole and crank arm journal straight oil hole of crankshaft with six cylinders.

163. Dual probe guiding hole drilling process for accurate probe contact.

164. The performance difference between air crew drill and mud motor was analyzed under the air drilling condition.

165. See'Technical Data'section for end flange dimensions and drilling templates. "

166. The drilling cost formula is deduced from classification drilling cost components an approach tois presented.

167. Drilling experiments are also done to test the performance of this ultrasonic driller.

168. Semi-submersible platform, drilling ship and other floating drilling devices are mostly used to drill in the deep-sea oil development.

169. So I volunteered to come to the rig and make a personal appeal backed by Greenpeace supporters everywhere to call for an end to this dangerous arctic oil drilling.

170. Actual Barite consumption will depend on hole condition while drilling.

171. Hello. Professor Berning. This is Freema good from the White Birch Drilling Compa goody. We were wondering if you could speak for the Drilling Technicing symposium we're sponsoring.

172. Engineering began to affect the farmer late in the 19th century, with steam-powered tractors and various tools for drilling seed holes and planting.

173. Drilling borehole in hard coal seam is mostly used to discharge gas, and cross layer borehole, roof rock borehole and laneway are mainly used to discharge gas in soft coal seam.

174. Rescue workers are therefore drilling a hole on the north side of the mine.

174. is a sentence dictionary, on which you can find excellent sentences for a large number of words.

175. This dissertation mainly introduces parallel communication of a master-slave system of three_coordinate printed circuit board numerical control drilling and milling machine tool.

176. Theoretical analysis is used to analyze shaft drilling lining's vertical stability problem in floating and dropping phases, its stable equilibrium is proved.

177. Through the application of MTD non - destructive testing equipment in drilling pipes cut - through was eradicated.

178. Piercement of drilling pump cold cyclinder is a serious problem existed in field application cavitation erosion.

179. Drilling decompression is simple and effective to treat high IP.

180. Using this model, using pattern recognition method can be carried out on the work area of other pending drilling bit selection, to improve the drilling rate when drilling to reduce drilling risk.

181. In this paper, the controlling system to improve ordinary vertical drill to automatic drilling machine based on PLC is introduced, and the automatic drill is suitable for batch production.

182. Pneumatic hammer drilling technology with low wob , low rate of revolution and high capacity to break rock is one of the best effective methods to solve the problems of hard rock drilling.

183. Colloidal particles are formed in considerable amounts in hard - rock drilling and blasting operation.

184. In this awy, the drilling pile with squeezing branch will give the reins to its great superiority in the engineering of large pillar net and large bearing pressure pillar pile.

184. Wish you will love and make progress everyday!

185. AC - SCR - DC mode is the best driving mode for a drilling rig.

186. The paper in detail stated the features of the drilling and grouting simultaneous operation, the implementation mode, design principle and support technology.

187. When DTH drilling in high confining pressure, its border condition has changed.

188. But I will qualify my agreement by suggesting policy adjustments to minimize the adverse effects of allowing more drilling or of imposing an excess profits tax.

189. The article expatiates upon design theory of heli - drilling rig and analyses their structural features.

190. The drilling unit is made of a very strong structure containing the single drilling spindles which run in perfectly ground bronze cylinders (sleeves).

191. The paper mainly used AVO and FVO attributes, combining with drilling data, to detect the oil-water boundary, spatial distribution and thickness of reservoir.

192. A simple laboratory testing method is established, and by means of this method mechanical bond strength is tested between drilling cutting and oilwell cement rock.

193. Because of drilling complicatedness of geological condition, some special stratum conditions must adopt new-type washing liquid, the foam is one kind of new-typly washing liquid.

194. Based on the surface geology, drilling, well test and log data of Chengdao buried hill, the parameters of fracture in the strate of Palaezoic and Archeozoic have been calua lated and evaluated .

195. The same principle was used in a method of drilling in oilfields.