网站首页  词典首页

请输入您要查询的英语单词:

 

单词 Deformation
例句
1. Changing stresses bring about more cracking and rock deformation.
2. The deformation of the bones was caused by poor diet.
3. Ductile substances are capable of considerable smooth, continuous deformation before they break.
4. Deformation modes involving hydrogen also drop dramatically in frequency on isotopic substitution.
5. Soil deformation during a quake could bend pipelines as though they were strands of copper wire.
6. Skull deformation is widely known later in the Iron Age where it occurred among the Alans and Huns.
7. Such deformation can be minimised by linking suspension cables to tensioning cables, converting them into a series of straight lengths.
8. B is termed the left Cauchy-Green deformation tensor, both terms having obvious origins in the definitions given above.
9. Some continental-margin orogens show evidence of deformation attributable to contraction in the back-arc region.
10. If it was a deformation, it was anticipated by Posidonius.
11. If this were not the case significant deformation would occur within plates rather than being concentrated along plate margins.
12. A considerably longer time is required for complete deformation to occur.
13. a deformation of the spine.
14. Normally, enormous deformation is abnormal.
15. Metal cladding high rate of weld forming, welding deformation small.
16. This paper studies its mechanism from stabilization, deformation and combined action.
17. Film anelasticity deformation occurred, causing the product on one side to the film self - crimping.
18. Any applied stress is now shared between the elements and each is subjected to the same deformation.
19. Many other sports, with a greater stress on grace and timing, require much less physical or hormonal deformation.
20. This formula differs somewhat from the classical Hertz expression for elastic deformation of a plane by a rigid sphere.
21. The first sections of the converging continental margins to collide suffer the most intense deformation.
22. Rocks in many places show evidence of such physical deformation.
23. Deformation is complex: there are at least two early phases of deformation.
24. The orientation of the chains of amorphous polymers on deformation.
24. try its best to gather and build good sentences.
25. Rapid cooling between 22 and 20Myr reflects both uplift during ductile phases of extensional deformation and ambient cooling of the granitic intrusions.
26. In a later chapter we will discuss larger-scale regional deformation.
27. The tilting of the layers tells us of a period of gentle deformation that followed burial of the sediments.
28. Other evidence supports the idea of a lack of major deformation within plates, at least over plates composed of oceanic lithosphere.
29. The results show that the single-phase materials with strong magnetoelectric properties at room temperature are obtained by the inducing deformation of crystal lattice and the elimination of impurity.
30. The bulk metal forming processes are calculated and analyzed by using a multi- step finite element method (FEM) based on deformation theory of plasticity.
31. Deformation will be concerted of the fourth weak interbed exceptant bank slope rock mass and weak interbed will be potential, the most dangerous failure plane.
32. To bone tissues, the normal physiological activity can lead to local deformation (strain), micro-damage, piezoelectric potentials, fluid flowing in bone canaliculus and streaming potentials.
33. In the paper the forming mechanism of the reflective cracks is analyzed from the angle of deformation compatibility relation , and the prevention way of reflective cracks discussed.
34. Under the same load, there is a non-linear relationship between bending deformation and temperature for SMP and SMPC beams.
35. The polarization is proportional to the deformation and causes an electric potential difference over the crystal.
36. Using the FEM, the deformation and a - die casting machine have been calculated by ANSYS.
37. The stress distribution and amount of deformation has been counted under different pavage conditions.
38. The relation between load and deformation of the spring element is analysed and the calculating methods of constant angle and maximum axial load are set up.
39. Welded sturdy box construction, using heavy - gauge steel plates for ruggedness. D - section frame for resistance to deformation.
40. Powder metallurgical material is compressible in plastic deformation . Its plasticity method needs to be further researched.
41. The initial stress or deformation fields are not usually homogeneous.
42. In chapter 3, the elastic deformation in icosahedral clusters was calculatedanalytically and a numerical simulation was performed to test the theory.
43. For the example of the ploughshare, this paper described the deformation rule, process and the special-plate type forgings.
44. The microstructure evolution of Q235 plain carbon steel in multi-pass hot deformation was investigated by means of hot compression simulation.
45. Furthermore, it provides an effective approach to calculate the deformation and load region size of the bearing.
46. The results show that the variation of static hydraulic pressure does not significantly affect the deformation and sound absorption performance of the structure with compound cavum.
47. The sucking device has a sucking-disk structure which contains multi-sucking mouths and gyral grooves in order to minimize the deformation of the wafer.
48. The effects appear to arise partly as a result of the concomitant changes in deformation behaviour.
49. The fixed knife device for a grass cutter solves the problems of easy jumpiness and deformation of the existing fixed knife device for a grass cutter.
50. It is difficult to pull out the bolt with ordinary socket wrench that can not provide axial tension because of the bolt drilling hole deformation and the collapse of holes.
51. Simple regression equations applicable to calculate pull - separating deformation were given.
52. Netlike plastic flow in the lower lithosphere, as viscoplastic flow involving plastic flow network, controls tectonic deformation and dynamic processes within the continental plate.
53. Some problems are discussed, such as the mechanical mode and equivalent stiffness of horizontal bracing system, the deformation compatibility between the bracing and retaining wall.
54. It used for slope monitoring, such as the open pit slope, the dump, the tailing dam, and so on, and also achieve the point and surface deformation monitory of slope.
54. Wish you can benefit from our online sentence dictionary and make progress every day!
55. Research for the deformation and internal forces of piled raft foundation on a thick soft substratum are concerned with not only the interaction between pile, raft and soils but the also the time.
56. The abrupt disappearance of stick-slip at the lower speed level is attributed to changes in the elastic deformation of the fiber.
57. The humiture balance workplace can reduce paper deformation, misregister electrostatics and so on.
58. What should the deformation after peritonaeum eat after tumour operation?
59. Relationship curves between seam dip angle, horizontal section height and roof deformation are derived, at the seam time, the criterion of failure is given in this paper.
60. Substrate mycelium of target pathogens suppressed with antagonistic actinomyces had been deformed or lysed and the degree of deformation were potentiated as prolonging the antagonistic.
61. Karayulgun dextral strike-slip fault, which is a thin-skinned structure, adjusted the deformation difference located at frontal range of Quele area.
62. Based on the pseudo-static test of four slit hollow shear wall models of reinforced concrete with different steel bar, the failure mechanism and deformation feature are discussed.
63. In-situ deformation tests are made at 35 points in the unloading zone with conditions of loading path and the maximum pressure similar to that of the arch dam acting on the rock mass.
64. The deformation of level foundation is generally symmetric of road central line and the deformation of slope foundation is mainly concentrated on the border side of the declivity.
65. According to Hertz contact theory, this paper discussed the elastic deformation in the ball screw systems and elastic potential energy caused by it.
66. Because of structural steelwork easy deformation in steel structural glass is not that simple.
67. Meanwhile, the calculated deformation of the rear fork structure was applied as the welding pre-deformation to the actual production process, in which qualified products were produced.
68. In this paper, the application of laser techniques to observing tilting deformation of multistorey buildings and chimneys is presented.
69. It is difficult to inject steam into cold production wells because of casing deformation resulting from well cementation difference between cold production and thermal production.
70. BS - DD 226 - 1996 Method for determining resistance to permanent deformation of bituminous mixtures subject to unconfined dynamic loading [ S ].
71. Punching is a kind of pressure process method that punching dies are used in press sheet to put pressure on the plastic deformation or separation, for a certain shape and size of components.
72. In this paper the morphology of the ferrite twin deformation, the conditions of a thick twin crystal formation, and the various factors to decide the quantity of twins produced are analyzed.
73. The linear film is the key to make plate, subject the network deformation of positive film, is meaningful to do the normalization and standardization of making film or plates well.
74. The differential salt tectonic deformation is mainly represented by structural differentiation at different levels, and structural zonation and segmentation in transverse and longitudinal sections.
75. So it is feasible to study the deformation behavior of sheet metals along different loading paths by using biaxial tensile test of cruciform specimen with slots on arms designed in this paper.
76. Higher lateral deformation and Poisson's ratio as well as negative volumetric strain can be reached for higher pore pressure even though axial strain of specimen is lower.
77. By outcomes of latest theory research, the direct formula about dilatancy angle and surrounding ground deformation is introduced.
78. Structure analysis showed that the incoordination in deformation process of two phases is the main reason why microcrack occurs at phase boundary.
79. A method is presented for dynamic analysis of walking vehicle system with large gross motion, small elastic deformation, and discontinuous boundary constraints.
80. The influence of groove fillet radii of vertical rolls on cropping and margin deformation of slab were analyzed.
81. The ratio of the magnitude of an applied shear stress to the velocity gradient that it produces; that is, a measure of a noncrystalline material's resistance to permanent deformation.
82. The reason of deduces deformation martensite in the drawing process is analysed also.
83. Finger is the important component of automobile engine rotor, whose centrifugal deformation is the key element affecting engine interstice.
84. The product can be directly made into flat thimble without warping and deformation.
85. And so there is deformation,friction effects,[]tidal effects and so on.
86. The deformation was changing from plastic intensity to weakness and the metamorphic facies ranged from amphibolite to low-grade greenschist.
87. The effect of base structural deformation on inherent frequency of a microbeam resonator is analyzed by using analytical method.
88. Accelerating the construction of concrete cushion as soon as possible can make full use of bracing effect on controlling the lateral deformation of retaining wall.
89. We shall present certain introductory notions that pertain to finite deformation in this chapter.
90. This paper advanced a study method that can observe plastic deformation behavior of surface layer of die cavity by showing austenite grain, size, crack morphology and propagation mode.
91. The monitoring results show that the uneven settlements of tower crane base and data fluctuation range of tower body deformation are small enough to meet safe usage requirement.
92. The interpretation of a typical sub-bottom profile reveals that the diapir of the Yellow River delta resulted from the interior deformation of soft prodelta layers at the delta front.
93. Probed into a new method to measure in-situ stress-core deformation method, which depends on measuring the variation of core diameter.
94. And anti-phase boundary energy is an important factor in a alloy material's resistance to deformation, and also affects the way deformation occurs.
95. The results show that the condition for the single plastic hinge mode in the case of finite lateral deformation is quite different from that of small deformation.
96. The paper analyses the vertical and horizontal deformations in San Jiang region by means of absolute gravity, deformation and GPS data.
97. According to the contrast of relative creep deformation, MDF compounded with Breakingfruit Chinkapin and PVC had a good anticroop property.
98. The deformation volume of the articular disc is bigger than that of the glenoid fossa and the condyle.
99. The dislocation structures of metal materials experienced fatigue deformation are changed and the fatigue life is increased.
100. In the present paper, the finite deformation and stress analysis for a hyperelastic rectangular plate with a center void under a uniaxial extension is studied.
101. The direct shear test on rigid presser was carried out to examine the load - deformation curve.
102. The relaxation test machine includes one deformation measurer set on the test sample to measure the length change of the test sample.
103. Quality problems regardingformaldehyde emission and deformation of laminate flooring are also analyzed and discussed.
104. A digital image processing technique for measuring the specimen deformation in triaxial test is presented.
105. However the electron Hall mobility is controlled by intervalley phonon deformation potential scattering when the temperature is higher.
106. The dynamic deformation process of sheet metal on the EMF was investigated.
107. The resultant grains tend also to be elongated along the direction of deformation.
108. We need to consider the deformation of only one strip parallel to generatrix of the cylinder.
109. The welding temperature field, welding longitudinal residual stress and deformation can be simulated accurately using the modified two-dimensional Gaussian model.
110. Combine with numerical analysis method, the connected predicting mode that first predicts tunnel deformation then landslide disaster is proposed.
111. Liquid dispersion process with a sinusoidally vibrated jet was investigated. The course of deformation and breaking of liquid jet from the nozzle was recorded and studied via a holographic technique.
112. An elastic-viscoplastic theory for reck masses is proposed by, introducing the deformation features on discontinuities.
113. An integral contact model was established to analyze the cylinder bore deformation of model 493 automotive diesel engine.
114. The Feasibility of estimating winding deformation by measuring circuit reactance is analysedin detail in this paper.
114. try its best to collect and make good sentences.
115. It is found that the fracture of TWIP steel is typical ductile fracture pattern and its deformation and fracture mechanisms are the formation, growth and coalescence of micro-voids.
116. Twin and single slip on the base surface were the main deformation ways at room temperature.
117. Rumple child produced mainly attributable to the paper around the edge of the deformation ( tight ).
118. The anorthosite underwent at least two more times of deformation than the norite, suggesting that the norite was emplaced after the consolidation and cooling of the anorthosite.
119. The material currency can support pressure of pressing form and generate deformation to form metal or plastics and so on waxiness material of the ended customizing currency.
120. The active contour model is a linear constraint, so the main computation involved in the deformation is a solution of a linear energy minimization problem.
121. The overhead traveling crane used at a cold strip mill factory is given to study the deformation, stress distribution and load capacity of the main girder with 3D-FEA Shell-to-Solid Submodel method.
122. Baser fon analyzing the relationship between rock deformation characteristics and support by means of the characteristic value method.
123. It indicates that mylonite in the root zone of nappe in the southern edge of Jiuling is a product resulted from ductile deformation controlled by dislocation in the deep structural level.
124. Clay slide is a mode of failure of clayey soil mass owing to itsinclined slip deformation.
125. From many tests it is concluded that the joint loading, unloading and reloading follow hyperbolic responses, and result in irrecoverable closure deformation with hardening of the joints.
126. The experimental results have showed that the deformation of polymer in macro cold tension stage is the accumulation and concentration of local deformation in the step of necking down and propagation.
127. Plastic deformation and creep are highly undesirable, resilience is favourable.
128. The superplasticity research was carried out under constant temperature compression deformation for salt-bath cyclic quenched and high frequency hardened T10A steel.
129. Interative algorithm is used to calculate the tire deformation and sinkage, tractive force, rolling resistance, torque, tractive coefficient, tractive efficiency under different soft terrains.
130. The geometric shape, deformation behavior description, energy equation and constraint equation of the filter is constructed.
131. Geometry processing, deformation etc. in advance of rendering on RSX.
132. The deformation mechanism of the ductile shear zones is the simple shearing of plain strain, and the quartz glide system is either of basal glide, or prismatic glide and rhombohedral glide.
133. In this paper the stress and deformation in a orthotropic hybrid laminated beam are studied.
134. As a result, the Weizhou-Shigouyi detachment structure is bounded on the east and west by faults and occurs as a synclinorium comprising exotic sheeted rocks with simple deformation.
135. The motions, deformation and heat transfer characteristic of a rising gas bubble through the liquid in a vertical channel are numerically predicted in this paper.
136. Based on the review, equivalent deformation processes for soil are proposed. The proper description of time effect in creep model is discussed. A method for accelerating creep test is proposed.
137. To the dam monitor mainly is to its deformation point displacement observation as well as the physical interpretation which distorts to the dam.
138. So, it's widely used in the dimension measure, deformation measure, mechanical defacement measure, 3D surface measure and high temperature measure in industrial field.
139. Elasticity deformation of belt can be produced during operation and cause verticality change of roller.
140. At the process of CT crack and rapture evolution, the acoustic emission can not precisely reflect the meso-mechanism of rock deformation and rapture because of localization of damage.
141. Such factors as structure design and welding method are taken into consideration to prevent bottom plate of large circular storage tank made of steel from deformation during welding.
142. Eight ERS1/2-SAR images recorded in the last ten years are used for determining the land-surface deformation in the Jungli Industry Park area by differential interferometric method.
143. Pulse shaping technique is used to realize stress equilibrium and deformation homogeneous in the specimen under dynamic loading at constant strain-rate during the tests.
144. Furthermore, the second-order effect and shear deformation of the structures were magnified due to semi-rigid connections, the ultimate load resistance of the structures was reduced simultaneity.
145. The best method that tumour of vertebral and hemal deformation cures?
146. In addition, using columniform punch and conical punch, different stress-strain distribution and thickness distribution at deformation region of flanging is compared.
147. Steep and antithetic platy structure of rock mass and geomorphology of the longitudinal valley in the dam site area cause wide-range toppling deformation on the cross-strait slope.
148. A multiplicative constitutive model of hyperelastoplasticity is adopted to simulate large deformation.
149. For the research on shear deformation characteristics of the discontinuous plane, the hyperbolic function is adopted to describe the shear deformation curve, and the key factors are discussed.
150. To rectify the geometric deformation of diffusion - tensor imaging ( DTI ) by non - rigid registration.
151. The intensity of stress wave can be greatly decreased because of lower wave impedance and plastic deformation.
152. The test included anchoring force of prestressed anchor cable, frictional coefficients, stress of concrete and steel bar and structure deformation.
153. A process for fabricating CuCrZr alloy spot-welding electrode by three cold extrusions is developed, with effect of cold deformation on alloy properties explored.
154. It is remarkable that setup of cross beam, length of curvature radius and eccentric distance of bearing affect internal force and deformation in curved girder bridge .
155. The specimen irradiated by intense laser generates distinct plastic deformation, and the profile of axial cross section of specimen after shocking is similar to a coniform figure.
156. Using deformation vector's observed data of many survey points, this paper established the deformation vector distribution model.
157. Springback occurs when sheet undergoes deformation, the accumulated error of forming simulation will make it more difficult to improve theprecision of the springback prediction.
158. The measurement of earth tilt is an important method of studying earth crust deformation and its earth tide, which means much to Geodynamics and the observation of earthquake prognostic.
159. The method of surfacing welding sealing strip was adopted to repair the deformation of the flange joint surface of the high and intermediate pressure outer casing .
160. After part of the furnace tube enduring high temperature in long time, degeneration of the material property and concentration of plastic deformation occurred which were resulted in explosion failure.
161. This paper focused on the relationship between the safety coefficient of piping and foundation pit deformation. To research them, a centrifuge test and numerical analysis have been done.
162. Unloading confining pressure tests could be controlled by stress and deformation.
163. The material of super Invar is advised to use to minish the disadvantage of thermal deformation.
164. Horizontal freezing induces ground frost heave and ground displacement. Excessive uneven displacement or deformation may damage the surrounding building.
165. Now you can adjust your UVW to match this, or use Photoshop's Transform deformation lattice or liquify to fit this to your UVW pretty quickly.
166. When the tire to reduce the side of bead wire, cut-tire occurred deformation larger than whole tire.
167. Based on the first-order shear deformation plate theory, axisymmetric governing buckling equations are derived for a functionally graded material circular plate subjected to in-plane pressure.
168. The shear-lag coefficient arid deformation of T-shaped short-leg shear wall are solved based on variation principle, various parameters and loading forms which may impact the shear-lag are discussed.
169. It calculates the cutoff wavelength and single-mode bandwidth at the change of the ridge dimensions, gives the dominant mode field pattern and the corresponding curve of the deformation vs.
170. The test results of different kind of soil indicate that it has high sensitivity to control lateral deformation and fulfils the requirement of K0-consolidation triaxial apparatus.
171. Deformation velocity has no obvious effect on the flow of material, initial yield stress and flow stress.
172. A new way for determinating of deformation reference of roller design in roll forming is forward.
173. It was found that the fracture of TWIP steel was typical ductile fracture pattern and its deformation and fracture processes were the formation, growth and coalescence of microvoids.
174. While taking soil deformation into account,[] the internal dissipation rate in the deformation zone caused by the cohesion variation is half of that occurs on the logarithmic spiral slip surface.
175. When abrasive grains impacted on the work piece surface, the top layer atomics are removed, plastic deformation appears at the same time.
176. The results indicate that GPS static positioning technology can reach the precision of milli-meter, and fully meet the requirements of high-precision deformation monitoring.
177. Only deformation is higher the critical deformation can the dynamic recrystallization be occurred.
178. In other words, the physical mechanism about deformation is mostly contained in the 0-qp intrinsic state.
179. The value of tooth deformation is the key - influencing factor on machining accuracy of tooth profile.
180. The optimal temperature of vacuum annealing of deformed alloys, and the characteristics and mechanism of deformation of biphase W alloys have been discussed in this paper as well.
181. The relationship between heads relative displacement and sheets maximum deformation is deduced by circular function forming model.
182. The magnitude of deformation affects the performance of hydraulic torque converter and its connection with adjacent parts.
183. Polarization dispersion due to stress anisotropy and elliptical core deformation are separated by measuring their wavelength dependences.
184. The forecast result of high precision is got in forecast of foundation pit deformation by GM(1,1) model by means of selecting original data alignment and revision of residual error.
185. The element coupling shape function meatrices are derived by means of geometrically nonlinear strain displacement relation un-der small deformation assumption.
186. In this paper, each welding residual stress fields and the welding deformation simulation result of the rear fork structure were given and quantitatively analyzed.
187. The error of deformation of the blade cut by electric pulse is caused by thermal stress, morphol-ogy stress and cutting stress.
188. It is now recognized that superplasticity is a potential deformation process in ceramics.
189. Deformed granitoid plutons may be used as the regional deformation markers to study those continental deformations and to analyse the early deformations of the old continental blocks.
190. In digital geometry processing, many applications such as morphing, deformation and texture transfer etc. require a bijective mapping between two or among more models.
191. Polarization and dispersion are created due to stress anisotropy and elliptical core deformation.
192. Epicentral depositions and earthquake deformation zones provide useful information about focal region size.
193. The results show that the static softening rate increases with the increase of deformation temperature and holding time, the size of grain is bigger too.
194. Computer paper moisture contents change easy paper expansion and compression fracture deformation caused by the paper.
195. A new phenomenon of re-dissolution of second phases and re-formation of supersaturate solid solution found in processes of severe plastic deformation was summarized.
196. Coarse crystalline LC4 Aluminium Alloy presents certain superplasticity at lower deformation temperature and higher strain rate because it can create effective recrystallize refinement.
197. Thus the mechanochemistry effect remarkably occurs have to make the grinding accumulated to the certain degree, in other words, the plastic deformation happens.
198. Matrix should be of martensite , because it can resist impact and has little deformation.
199. During the half cycle of cooling, the sample tends to restore its original shape. However, because the plastic compressive deformation formed before cannot come back, the crack opens gradually.
200. The practical analysis indicates that the deformation and stability are controlled by cataclasite structure and the effect of the structure surface far exceeds the rock block one.
201. Hardness is a measure of the resistance to localize plastic deformation.
202. The temperature of converter shell rises sharply with the utilization of MgO-C brick lining, it results in the shell permanent deformation.
203. The larger the print area, the more ink layer depth, Peel protrudent deformation.
204. One of the essential and full conditions for squeeze-forming from liquid metal in static condition is the plastic deformation.
205. The analysis of rock deformation factors should be fed back to construction operation dynamically[http:///deformation.html], thus producing satisfactory results in practice.
206. The results showed that after the deformation of unrecrystallized austenite and quenching, martensite block width decreased and bent, while the packet size increased to some extent.
207. It might provide a new method for quantified study on irregular hot deformation microstructure.
208. The factors affecting dilatability of low expansion such as chemical compositions, heat treatment, plastic deformation, precipitate ph ase were analyzed.
209. Mineralization is commonly the result of full feedback coupling between the four processes of mechanical deformation, thermal transport, fluid flow, and mass transport.
210. The evolution of deformation dislocation structure during the tensile loading was examined by transmission electron microscopy in the tempered martensite of low and middle carbon alloy steels.
211. It also suggests some ways to improve the techniques of acid cleaning, bonderizing, annealing and deformation.
212. This paper presents a study of the drawing deformation process upon the theory of plasticity.
213. It was shown that at all stages of unloading, interparticle sliding occurred, the number of interparticle contacts reduced and irrecoverable deformation of the microstructure occurred.
214. The circular elastic slice of degassing valve was simplified as ring mechanics and the mechanic model of the slice under uniformly distributed load was established to investigate its deformation.
215. Based on the elastic foundation beam theory, a finite element model of foundation pit was established. The effect of soil improvement on lateral deformation of the retaining structures was studied.
216. This deformation happens when the vacuum pump is switched on and off.
217. With this method with dry wash, and maintain clothing not Diaose, deformation.
218. The criterion of energy transformation and conservation are used to derive the supplementary restraint condition of buckling deformation at the front of axial compression wave.
219. If Chalazion great, you can make eyes deformation caused blurred vision.
220. There exists continuous re-distribution of the CV-graphitizing elements in the melt, which is one of the important factors causing deformation of the graphite morphology.
221. Conversely, applying excitation electric field, medium to generate mechanical deformation, called the inverse piezoelectric effect.
222. The spiral spring deformation formula and coefficient of stiffness are directly derived by aiding dimensional analysis and 2D model of spiral spring deformation mechanism.
223. The abnormal deformation or local damage of steel structure can be reflected by the load-deflection curve and the deflection curve of the longitudinal axis.
224. In order to supply the theoretical basis, the formulae for calculating the deformation, stresses and effective area of the conical welded bellows are derived.
225. Setout ellipse curve with the traditional method of four-center will bring up offset of point and deformation of chart .
226. The method of fault geometrical parameter that to bring about tectonic deformation through known deformation characteristic is go by the name of structure inversion.
227. CALCULATION OF THE MOVEMENT AND DEFORMATION IN ARBITRARY SECTION OF SUBSIDENCE TROUGH.
228. Meanwhile, the springback potential energy principle is applied to calculate the springback deformation of a pure bending of curved beam.
229. The results show that the methods developed in this paper are reliable, which can reasonably simulate the seismic collapse process of reinforced concrete frame structures with shear type deformation.
230. Based on the theory of slip line and plastic deformation of metal, the clamping force for forging reduction of cylinder is analyzed and studied.
231. The compatible state of deformation between buried strain gauge and concrete is analyzed theoretically.
232. Study on the Joint Deformation and the Interface Contaminant Ejection Rate in DC Upset Butt Welding.
233. A method of calculating elastic curve for semiflexible plate wind tunnel nozzle has been presented, based on the linear theory of small deflection of beam deformation, in this paper.
234. The results manifested,[] it should be supposed to deduct the relative deformation of the testing system in the course of data processing.
235. Torsion deformation is the biggest effect factor on elastic limit equivalent stress.
236. Besides Coulomb andnuclear interactions, the deformation and intrinsic excitation energies of fragments arealso taken into account.
237. The behaviour of strain softening is due to localization of deformation and damage. The constitutive model, which analyse localization of strain and damage, is distinct from the conventional model.
238. Due to the influence of the elastic deformation of flexible structures, the efficiency drops constantly with the increase of the dynamic pressure, which even causes aileron reversal.
239. According to the modern seismic conception, the critical zone of the RC member can be in the state of inelastic deformation after yield under strong motion.
240. The earth pressure of the sealed cabin is a very important controlling parameter and is intimately related to the stability of excavated surface and deformation of ground.
241. Thus we can better understand the deformation of chert in a highly fluid form.
242. The influences of strip thickness, forward and backward tension, reduction ratio and resistance to deformation on the edge drop were investigated in detail.
243. At the middle scale is the plate boundary level, where the Plate Boundary Observatory (PBO) will image and characterize the slow deformation of the earth along the western U. S. and Alaska.
244. For this study region, the deformation is mainly controlled by the faults trending WNW, NW and NE.
245. Cutting head collision, workpiece deformation, and corner burning, which are the three main difficulties in three-dimensional laser cutting are Putted forward, and their Solution are given.
246. As bearing pressure isn't enough beam and plate deformation of reinforcement concrete is much big, crack is much wide and rusting is serious.
246. is a online sentence dictionary, on which you can find nice sentences for a large number of words.
247. This paper mainly discusses the issues of monitoring the verticalness central deformation and the turning round of Sichuan TV tower by post-processing static observation of GPS.
248. this article, deformation behaviour was studied for an aromatic copolyester fibre con - taining p - hydroxybenzonic acid ( HBA ) and 2 - hydroxy - 6 - naphthaoic acid ( HNA ).
249. Incremental manifold method is extended to the large deformation for rock.
250. The deformation properties of core gravelly soil of the Nuozhadu high rockfill dam are studied by using medium-scale triaxial tests and the field loading tests.
251. The numerical expression of quantity relations between the limit capacity of angle deformation and the structure of spherical shell have got, tests show that it may be used with JB1127-82 standard.
252. The fossils data, deformation and metamorphism delineation of the studied strata into the Tianshuihai Group Complex.
253. Train travelling load has little influence on the lateral earth pressure on the facing, the vertical earth pressure, and the tied-reinforcement deformation.
254. With a given bending and torsion deformation of wing tip , the whole geometry can be estimated.
255. In this paper, crankshaft-bearing system is taken as the research object, and the lubrication performance of crankshaft bearing considering crankshaft deformation under the actual load is analyzed.
256. Will be erected vertical mattress, or can not be erected if the bending deformation, indicating a rough work in this mattress.
257. They are the shape imitation, rotating, folding, topological deformation, fractal composition and graphic expression.
258. In the light of different deformation characteristics, 8 deformational types are divided.
259. At last, a type of extensometer calibration technique for deformation sensor is proposed.
260. Described the principle of 2 - D discontinuous deformation analysis ( DDA ) and the numerical model of bolt.
261. Magnitudes and phases corresponding to alternating load and deformation were obtained by Fourierism transform.
262. Approximate solution of grinding force has been resulted by weighted residual method from grinding bar's deformation.
随便看

 

英语例句大全共收录104207条中英例句词条,基本覆盖所有常用英文单词的例句、长难句及中文翻译,是不可多得的英语学习材料。

 

Copyright © 2000-2024 Suppus.net All Rights Reserved
更新时间:2024/12/22 11:20:30